June 2015 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Mon Jun 1 03:26:07 EDT 2015
Ending: Tue Jun 30 20:49:56 EDT 2015
Messages: 597

• [OpenWrt-Devel] [PATCHv2] ralink: add support for ap699ge8c2   Cristian Morales Vega
• [OpenWrt-Devel] How to track IO usage of internal flash mtd partitions?   Sergey Zakharchenko
• [OpenWrt-Devel] [PATCH] odhcp6c: script: only call firewall, if installed   Steven Barth
  • [OpenWrt-Devel] [PATCH] odhcp6c: script: only call firewall, if installed   Bastian Bittorf
• [OpenWrt-Devel] [PATCH RFC] brcmfmac: register wiphy(s) during module_init   Rafał Miłecki
• [OpenWrt-Devel] folder for snapshot builds missing for ipq806x   Daniel Golle
• [OpenWrt-Devel] [PATCHv2] scripts/feeds: observe -p flag for preferential feeds   Karl Palsson
  • [OpenWrt-Devel] [PATCHv2] scripts/feeds: observe -p flag for preferential feeds   Karl Palsson
    • [OpenWrt-Devel] [PATCHv2] scripts/feeds: observe -p flag for preferential feeds   Karl Palsson
• [OpenWrt-Devel] [PATCH] ar71xx: add support for compex wpj531   Christian Mehlis
• [OpenWrt-Devel] [PATCH 1/2] ipq806x: move stmmac support in the kernel binary   John Crispin
• [OpenWrt-Devel] lantiq DSL drivers / firmware info   Martin Blumenstingl
  • [OpenWrt-Devel] lantiq DSL drivers / firmware info   Aleksander Wałęski
    • [OpenWrt-Devel] lantiq DSL drivers / firmware info   Martin Blumenstingl
      • [OpenWrt-Devel] lantiq DSL drivers / firmware info   Aleksander Wałęski
      • [OpenWrt-Devel] lantiq DSL drivers / firmware info   Martin Blumenstingl
      • [OpenWrt-Devel] lantiq DSL drivers / firmware info   Martin Blumenstingl
      • [OpenWrt-Devel] lantiq DSL drivers / firmware info   Aleksander Wałęski
      • [OpenWrt-Devel] lantiq DSL drivers / firmware info   Sylwester Petela
      • [OpenWrt-Devel] lantiq DSL drivers / firmware info   Martin Blumenstingl
  • [OpenWrt-Devel] lantiq DSL drivers / firmware info   Florian Eckert
    • [OpenWrt-Devel] lantiq DSL drivers / firmware info   Martin Blumenstingl
• [OpenWrt-Devel] ar71xx: How to integrate UniFi AP Outdoor Plus HSR?   Stefan Rompf
  • [OpenWrt-Devel] ar71xx: How to integrate UniFi AP Outdoor Plus HSR?   Felix Fietkau
    • [OpenWrt-Devel] ar71xx: How to integrate UniFi AP Outdoor Plus HSR?   Stefan Rompf
• [OpenWrt-Devel] [PATCH 1/4] kernel: mips jump only works with memory less then 256mb. when enable HIGHMEM use long jump   John Crispin
• [OpenWrt-Devel] [PATCH] [ 1/5] ramips: fix ethernet vlan tx offload support check when delete   michael lee
  • [OpenWrt-Devel] [PATCH] [ 2/5] ramips: change ethernet napi interrupt sequence   michael lee
  • [OpenWrt-Devel] [PATCH] [ 3/5] ramips: improve tx clean up and add fe_tx_ring struct   michael lee
  • [OpenWrt-Devel] [PATCH] [ 4/5] ramips: add xmit_more support   michael lee
    • [OpenWrt-Devel] [PATCH] [ 4/5] ramips: add xmit_more support   Felix Fietkau
      • [OpenWrt-Devel] [PATCH] [ 4/5] ramips: add xmit_more support   Mingyu Li
      • [OpenWrt-Devel] [PATCH] [ 4/5] ramips: add xmit_more support   Mingyu Li
  • [OpenWrt-Devel] [PATCH] [ 5/5] ramips: collect rx related members to fe_rx_ring struct   michael lee
• [OpenWrt-Devel] Bump up to olsrd v0.6.8 on Barrier Breaker?   Ben West
• [OpenWrt-Devel] [PATCH] ncurses: Fix building with gcc 5.1   Hauke Mehrtens
• [OpenWrt-Devel] Regarding bridge multicast-to-unicast patch   Linus Lüssing
  • [OpenWrt-Devel] Regarding bridge multicast-to-unicast patch   Steven Barth
    • [OpenWrt-Devel] Regarding bridge multicast-to-unicast patch   Linus Lüssing
      • [OpenWrt-Devel] Regarding bridge multicast-to-unicast patch   Steven Barth
      • [OpenWrt-Devel] Regarding bridge multicast-to-unicast patch   Hans Dedecker
      • [OpenWrt-Devel] Regarding bridge multicast-to-unicast patch   Linus Lüssing
      • [OpenWrt-Devel] Regarding bridge multicast-to-unicast patch   Steven Barth
      • [OpenWrt-Devel] Regarding bridge multicast-to-unicast patch   Linus Lüssing
• [OpenWrt-Devel] [gregkh at linuxfoundation.org: Patch "ovl: mount read-only if workdir can't be created" has been added to the 4.0-stable tree]   Bastian Bittorf
• [OpenWrt-Devel] [PATCH 1/1] ramips: Add support for RT5350F-OLinuXino   gamishev at gmail.com
  • [OpenWrt-Devel] [PATCH 1/1] ramips: Add support for RT5350F-OLinuXino   John Crispin
• [OpenWrt-Devel] [PATCH] base-files: default_do_upgrade: accept & forward image extraction command   Rafał Miłecki
  • [OpenWrt-Devel] [PATCH V2 1/2] base-files: default_do_upgrade: accept & forward image extraction command   Rafał Miłecki
    • [OpenWrt-Devel] [PATCH V2 2/2] brcm47xx: extract TRX from image on the fly   Rafał Miłecki
• [OpenWrt-Devel] [PATCH] Add sch_fq and sch_pie to the kmod-sched package.   Toke Høiland-Jørgensen
  • [OpenWrt-Devel] [PATCH] Add sch_fq and sch_pie to the kmod-sched package.   Etienne Champetier
  • [OpenWrt-Devel] [PATCH] Add sch_fq and sch_pie to the kmod-sched package.   Toke Høiland-Jørgensen
    • [OpenWrt-Devel] [PATCH] Add sch_fq and sch_pie to the kmod-sched package.   Jo-Philipp Wich
    • [OpenWrt-Devel] [PATCH] Add sch_fq and sch_pie to the kmod-sched package.   Steven Barth
• [OpenWrt-Devel] Add support for Thomson TG582n DANT-1 board   Kejia Hu (Terry)
  • [OpenWrt-Devel] [PATCH 0/3] Add support for Thomson TG582n DANT-1 board   Kejia Hu (Terry)
    • [OpenWrt-Devel] [PATCH 0/3] Add support for Thomson TG582n DANT-1 board   Jonas Gorski
  • [OpenWrt-Devel] [PATCH 1/3] Add support for EON EN25Q128 flash chip.   Kejia Hu (Terry)
    • [OpenWrt-Devel] [PATCH 1/3] Add support for EON EN25Q128 flash chip.   Jonas Gorski
  • [OpenWrt-Devel] [PATCH 2/3] Add support for TG582n DANT-1 board.   Kejia Hu (Terry)
    • [OpenWrt-Devel] [PATCH 2/3] Add support for TG582n DANT-1 board.   Jonas Gorski
  • [OpenWrt-Devel] [PATCH 3/3] Add TG582N option in profile section of menuconfig   Kejia Hu (Terry)
• [OpenWrt-Devel] [PATCH] lldpd: add option to disable custom TLVs   Alexandru Ardelean
• [OpenWrt-Devel] [PATCH] ar71xx: fix 100/10mbps ethernet link issues on mynet range extender   Christian Lamparter
  • [OpenWrt-Devel] [PATCH] ar71xx: fix 100/10mbps ethernet link issues on mynet range extender   Dave Taht
    • [OpenWrt-Devel] [PATCH] ar71xx: fix 100/10mbps ethernet link issues on mynet range extender   Florian Fainelli
    • [OpenWrt-Devel] Rate limiting features of the ag71xx hardware   Christian Lamparter
  • [OpenWrt-Devel] [PATCH] ar71xx: fix 100/10mbps ethernet link issues on mynet range extender   Christian Lamparter
    • [OpenWrt-Devel] [PATCH] ar71xx: fix 100/10mbps ethernet link issues on mynet range extender   Florian Fainelli
      • [OpenWrt-Devel] [PATCH] ar71xx: fix 100/10mbps ethernet link issues on mynet range extender   Christian Lamparter
      • [OpenWrt-Devel] [PATCH] ar71xx: fix 100/10mbps ethernet link issues on mynet range extender   Christian Lamparter
• [OpenWrt-Devel] [PATCH] [base-files] show hint when JFFS2-partition is full and overlayfs mounted read-only   Bastian Bittorf
• [OpenWrt-Devel] [PATCH] ar71xx: fix AR71XX_MODEL for TP-Link TL-WA830RE v1   Matthias Schiffer
• [OpenWrt-Devel] [PATCH 1/1] [RESEND] ramips: Add support for RT5350F-OLinuXino V2   gamishev at gmail.com
• [OpenWrt-Devel] Automatically update CRC on TG582N board when rootfs changes.   Kejia Hu (Terry)
  • [OpenWrt-Devel] [PATCH] Add tg582n to the list of do_fixtrx.   Kejia Hu (Terry)
    • [OpenWrt-Devel] [PATCH] Add tg582n to the list of do_fixtrx.   Jonas Gorski
  • [OpenWrt-Devel] Automatically update CRC on TG582N board when rootfs changes.   Jonas Gorski
• [OpenWrt-Devel] [PATCH 0/5] libubox: tweak a bit.   Yousong Zhou
  • [OpenWrt-Devel] [PATCH 1/5] ulog: always use stderr for ulog_stdio().   Yousong Zhou
  • [OpenWrt-Devel] [PATCH 2/5] utils: refine calloc_a a bit.   Yousong Zhou
    • [OpenWrt-Devel] [PATCH 2/5] utils: refine calloc_a a bit.   Felix Fietkau
      • [OpenWrt-Devel] [PATCH 2/5] utils: refine calloc_a a bit.   Yousong Zhou
      • [OpenWrt-Devel] [PATCH 2/5] utils: refine calloc_a a bit.   Felix Fietkau
  • [OpenWrt-Devel] [PATCH 3/5] ustream: tweak ustream_prepare_buf() a bit.   Yousong Zhou
  • [OpenWrt-Devel] [PATCH 4/5] ustream-fd: readability change.   Yousong Zhou
  • [OpenWrt-Devel] [PATCH 5/5] ustream-fd: stop trying to read when s->read_blocked is set.   Yousong Zhou
• [OpenWrt-Devel] OpenWrt Specific Linux Test Project Required   Anindya Sundar Gayen
  • [OpenWrt-Devel] OpenWrt Specific Linux Test Project Required   Anindya Sundar Gayen
    • [OpenWrt-Devel] OpenWrt Specific Linux Test Project Required   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH 1/3] lantiq: Add support for Arcadyan VGV7510KW22 (known as o2 Box 6431)   Martin Blumenstingl
  • [OpenWrt-Devel] [PATCH 2/3] uboot-lantiq: Add Arcadyan VGV7510KW22 support   Martin Blumenstingl
  • [OpenWrt-Devel] [PATCH 3/3] lantiq: Backport gpio-stp-xway to fix the highest bits of the PHY LEDs   Martin Blumenstingl
• [OpenWrt-Devel] Porting OpenWRT to a MediaTek MT7688   Thomas David Paynter
  • [OpenWrt-Devel] Porting OpenWRT to a MediaTek MT7688   John Crispin
    • [OpenWrt-Devel] Porting OpenWRT to a MediaTek MT7688   Marc Nicholas
• [OpenWrt-Devel] [PATCH 4/4] ralink: firewrt support memory detect   Felix Fietkau
  • [OpenWrt-Devel] [PATCH 4/4] ralink: firewrt support memory detect   Felix Fietkau
    • [OpenWrt-Devel] [PATCH 4/4] ralink: firewrt support memory detect   Felix Fietkau
      • [OpenWrt-Devel] [PATCH 4/4] ralink: firewrt support memory detect   Felix Fietkau
• [OpenWrt-Devel] [PATCH] [packages] mtd: add missing <endian.h> include   Shiz
• [OpenWrt-Devel] [PATCH 1/2] kernel: when enable HIGHMEM use long jump   wengbj
  • [OpenWrt-Devel] [PATCH 2/2] ramips: fix the memory map on FireWRT   wengbj
• [OpenWrt-Devel] [PATCH] [RFC] b53: widen stp state mask to 3 bits (instead of 2)   Alexandru Ardelean
• [OpenWrt-Devel] Linux 4.x   Baptiste Clenet
  • [OpenWrt-Devel] Linux 4.x   Sedat Dilek
  • [OpenWrt-Devel] Linux 4.x   Dirk Neukirchen
    • [OpenWrt-Devel] Linux 4.x   Hauke Mehrtens
    • [OpenWrt-Devel] Linux 4.x   Roman Yeryomin
      • [OpenWrt-Devel] Linux 4.x   Baptiste Clenet
      • [OpenWrt-Devel] Linux 4.x   Baptiste Clenet
      • [OpenWrt-Devel] Linux 4.x   Varka Bhadram
      • [OpenWrt-Devel] Linux 4.x   Baptiste Clenet
      • [OpenWrt-Devel] Linux 4.x   Varka Bhadram
      • [OpenWrt-Devel] Linux 4.x   Baptiste Clenet
      • [OpenWrt-Devel] Linux 4.x   Baptiste Clenet
      • [OpenWrt-Devel] Linux 4.x   Varka Bhadram
      • [OpenWrt-Devel] Linux 4.x   Varka Bhadram
      • [OpenWrt-Devel] Linux 4.x   Baptiste Clenet
      • [OpenWrt-Devel] Linux 4.x   Varka Bhadram
      • [OpenWrt-Devel] Linux 4.x   Baptiste Clenet
      • [OpenWrt-Devel] Linux 4.x   Baptiste Clenet
      • [OpenWrt-Devel] Linux 4.x   Varka Bhadram
      • [OpenWrt-Devel] Linux 4.x   Baptiste Clenet
      • [OpenWrt-Devel] Linux 4.x   Baptiste Clenet
      • [OpenWrt-Devel] Linux 4.x   Varka Bhadram
      • [OpenWrt-Devel] Linux 4.x   Baptiste Clenet
      • [OpenWrt-Devel] Linux 4.x   Varka Bhadram
      • [OpenWrt-Devel] Linux 4.x   Baptiste Clenet
• [OpenWrt-Devel] [PATCH 1/2] ar71xx: fix mac offset in firmware file   Cezary Jackiewicz
• [OpenWrt-Devel] [PATCH 2/2] ar71xx: add support for TRENDnet TEW-823DRU   Cezary Jackiewicz
• [OpenWrt-Devel] [PATCH] ramips: Add support for the D-Link DCS-930 B1   L. D. Pinney
• [OpenWrt-Devel] bc: add download mirrors   Hannu Nyman
  • [OpenWrt-Devel] [PATCH v2] bc: add download mirrors   Hannu Nyman
• [OpenWrt-Devel] grub: add download mirrors   Hannu Nyman
• [OpenWrt-Devel] Visita a Abrint   Flavio Leonel
• [OpenWrt-Devel] [PATCH RFC] Add support for Ubiquiti Unifi Outdoor Plus   Stefan Rompf
  • [OpenWrt-Devel] [PATCH RFC] Add support for Ubiquiti Unifi Outdoor Plus   Kirill Berezin
    • [OpenWrt-Devel] [PATCH RFC] Add support for Ubiquiti Unifi Outdoor Plus   Arjen de Korte
    • [OpenWrt-Devel] [PATCH RFC] Add support for Ubiquiti Unifi Outdoor Plus   Stefan Rompf
• [OpenWrt-Devel] [PATCH] libubox: cmake: Add BUILD_EXAMPLES option   Nikolay Dimitrov
• [OpenWrt-Devel] adding tp-link wr740n v5.0 support   Daniel Petre
  • [OpenWrt-Devel] adding tp-link wr740n v5.0 support   Daniel Petre
• [OpenWrt-Devel] [PATCH] dnsmasq: bump to dnsmasq2.73rc9   Kevin Darbyshire-Bryant
  • [OpenWrt-Devel] [PATCH] dnsmasq: bump to dnsmasq2.73rc9   Steven Barth
    • [OpenWrt-Devel] [PATCH] dnsmasq: bump to dnsmasq2.73rc9   Kevin Darbyshire-Bryant
• [OpenWrt-Devel] [PATCH,v2] dnsmasq: bump to dnsmasq2.73rc9   Kevin Darbyshire-Bryant
  • [OpenWrt-Devel] [PATCH,v2] dnsmasq: bump to dnsmasq2.73rc9   Steven Barth
    • [OpenWrt-Devel] [PATCH,v2] dnsmasq: bump to dnsmasq2.73rc9   Kevin Darbyshire-Bryant
      • [OpenWrt-Devel] [PATCH,v2] dnsmasq: bump to dnsmasq2.73rc9   Jonathan Bennett
      • [OpenWrt-Devel] [PATCH,v2] dnsmasq: bump to dnsmasq2.73rc9   Steven Barth
• [OpenWrt-Devel] [PATCH 0/5] ar71xx: move ubnt images to new build code   Alexander Couzens
  • [OpenWrt-Devel] [PATCH 1/5] image.mk: add Build step combined-image   Alexander Couzens
    • [OpenWrt-Devel] [PATCH 1/5] image.mk: add Build step combined-image   Yaroslav Syrytsia
  • [OpenWrt-Devel] [PATCH 2/5] image.mk: add Build step pad-to   Alexander Couzens
  • [OpenWrt-Devel] [PATCH 3/5] ar71xx/image: new build step Build/mkubntimage for ubnt factory images   Alexander Couzens
  • [OpenWrt-Devel] [PATCH 4/5] ar71xx/image: add build step mkubntimage2 mkubntkernelimage for unifi boards   Alexander Couzens
  • [OpenWrt-Devel] [PATCH 5/5] ar71xx/image: move ubnt images to new BuildCode   Alexander Couzens
    • [OpenWrt-Devel] [PATCH 5/5] ar71xx/image: move ubnt images to new BuildCode   Roman Yeryomin
• [OpenWrt-Devel] [PATCH] dnsmasq: fix config file typo   Jonathan McCrohan
• [OpenWrt-Devel] netifd: handling of interfaces with proto "none"   Lars Kruse
  • [OpenWrt-Devel] netifd: handling of interfaces with proto "none"   Jo-Philipp Wich
• [OpenWrt-Devel] [PATCH] ramips: Add Support for the Linksys RE6500   L. D. Pinney
• [OpenWrt-Devel] strongswan CVE-2015-3991 CVE-2015-4171   Noel Kuntze
  • [OpenWrt-Devel] strongswan CVE-2015-3991 CVE-2015-4171   Steven Barth
• [OpenWrt-Devel] [PATCH] ar71xx: add support for tp-link wr740n v5.0 (EU)   Daniel Petre
  • [OpenWrt-Devel] [PATCH] ar71xx: add support for tp-link wr740n v5.0 (EU)   valent.turkovic at gmail.com
    • [OpenWrt-Devel] [PATCH] ar71xx: add support for tp-link wr740n v5.0 (EU)   Daniel Petre
      • [OpenWrt-Devel] [PATCH] ar71xx: add support for tp-link wr740n v5.0 (EU)   valent.turkovic at gmail.com
  • [OpenWrt-Devel] [PATCH] ar71xx: add support for tp-link wr740n v5.0 (EU)   Matthias Schiffer
    • [OpenWrt-Devel] [PATCH] ar71xx: add support for tp-link wr740n v5.0 (EU)   valent.turkovic at gmail.com
• [OpenWrt-Devel] [PATCH v2 0/2] Support Ubiquiti Unifi Outdoor Plus HSR filter   Stefan Rompf
  • [OpenWrt-Devel] [PATCH v2 1/2] Support Ubiquiti Unifi Outdoor Plus HSR filter   Stefan Rompf
  • [OpenWrt-Devel] [PATCH v2 2/2] Support Ubiquiti Unifi Outdoor Plus HSR filter   Stefan Rompf
• [OpenWrt-Devel] How to use wm8960-audio driver   Tochiro SrcHack
  • [OpenWrt-Devel] How to use wm8960-audio driver   John Crispin
• [OpenWrt-Devel] [PATCH] b53 kernel memory corruption fix   blmink
  • [OpenWrt-Devel] [PATCH] b53 kernel memory corruption fix   Rafał Miłecki
  • [OpenWrt-Devel] [PATCH] b53 kernel memory corruption fix   Jonas Gorski
• [OpenWrt-Devel] [PATCH] kernel: add Realtek USB to Ethernet modules   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH] grub2: disable stack-protector   Dirk Neukirchen
  • [OpenWrt-Devel] [PATCH] grub2: disable stack-protector   Jonas Gorski
• [OpenWrt-Devel] [PATCH] samba36: remove host build paths   Dirk Neukirchen
• [OpenWrt-Devel] netifd + wpa_supplicant: Multiple wifi networks not supported? (Multiple wireless 'client')   Felipe Lavratti
• [OpenWrt-Devel] [PATCH 1/3] 6rd: Remove sourcerouting parameter registration   Hans Dedecker
  • [OpenWrt-Devel] [PATCH 2/3] 6to4: Remove sourcerouting parameter registration   Hans Dedecker
    • [OpenWrt-Devel] [PATCH 2/3] 6to4: Remove sourcerouting parameter registration   Jonas Gorski
      • [OpenWrt-Devel] [PATCH 2/3] 6to4: Remove sourcerouting parameter registration   Steven Barth
  • [OpenWrt-Devel] [PATCH 3/3] ppp: Unnumbered support   Hans Dedecker
    • [OpenWrt-Devel] [PATCH 3/3] ppp: Unnumbered support   Steven Barth
      • [OpenWrt-Devel] [PATCH 3/3] ppp: Unnumbered support   Hans Dedecker
      • [OpenWrt-Devel] [PATCH 3/3] ppp: Unnumbered support   Steven Barth
      • [OpenWrt-Devel] [PATCH 3/3] ppp: Unnumbered support   Steven Barth
      • [OpenWrt-Devel] [PATCH 3/3] ppp: Unnumbered support   Hans Dedecker
      • [OpenWrt-Devel] [PATCH 3/3] ppp: Unnumbered support   Hans Dedecker
  • [OpenWrt-Devel] [PATCH 1/3] 6rd: Remove sourcerouting parameter registration   Jonas Gorski
• [PATCH] Belkin F7DXXXX (BCM47XX based) Support for Linux 3.18   Joseph East
• [OpenWrt-Devel] [PATCH] base-files: add /etc/profile.d support   Hendrik Lüth
  • [OpenWrt-Devel] [PATCH] base-files: add /etc/profile.d support   Bastian Bittorf
    • [OpenWrt-Devel] [PATCH] base-files: add /etc/profile.d support   thomas.langer at lantiq.com
      • [OpenWrt-Devel] [PATCH] base-files: add /etc/profile.d support   Bastian Bittorf
      • [OpenWrt-Devel] [PATCH] base-files: add /etc/profile.d support   Matthias Schiffer
      • [OpenWrt-Devel] [PATCH] base-files: add /etc/profile.d support   Bastian Bittorf
      • [OpenWrt-Devel] [PATCH] base-files: add /etc/profile.d support   Hendrik Lüth
      • [OpenWrt-Devel] [PATCH] base-files: add /etc/profile.d support   Matthias Schiffer
      • [OpenWrt-Devel] [PATCH] base-files: add /etc/profile.d support   Bastian Bittorf
  • [OpenWrt-Devel] [PATCH] base-files: add /etc/profile.d support   Yousong Zhou
    • [OpenWrt-Devel] [PATCH] base-files: add /etc/profile.d support   Bastian Bittorf
      • [OpenWrt-Devel] [PATCH] base-files: add /etc/profile.d support   Bruno Randolf
• [OpenWrt-Devel] [PATCHv2] 6rd: Remove sourcerouting parameter registration   Hans Dedecker
  • [OpenWrt-Devel] [PATCHv2] 6to4: Remove sourcerouting parameter registration   Hans Dedecker
• [OpenWrt-Devel] Openwrt on RB850gx2   ravin goyal
  • [OpenWrt-Devel] Openwrt on RB850gx2   Varka Bhadram
    • [OpenWrt-Devel] Openwrt on RB850gx2   Varka Bhadram
      • [OpenWrt-Devel] Openwrt on RB850gx2   ravin goyal
• [OpenWrt-Devel] x86_64 packages missing   William Haynes
  • [OpenWrt-Devel] x86_64 packages missing   Jo-Philipp Wich
• [OpenWrt-Devel] can netifd automatically restart a service?   Nikos Mavrogiannopoulos
  • [OpenWrt-Devel] can netifd automatically restart a service?   Yousong Zhou
  • [OpenWrt-Devel] can netifd automatically restart a service?   Bastian Bittorf
  • [OpenWrt-Devel] can netifd automatically restart a service?   Bruno Randolf
    • [OpenWrt-Devel] can netifd automatically restart a service?   Nikos Mavrogiannopoulos
• [OpenWrt-Devel] Device tree issues with TL-WDR4900 (mpc85xx) and kernel 4.0.1   Roman Yeryomin
  • [OpenWrt-Devel] Device tree issues with TL-WDR4900 (mpc85xx) and kernel 4.0.1   Roman Yeryomin
  • [OpenWrt-Devel] Device tree issues with TL-WDR4900 (mpc85xx) and kernel 4.0.1   Felix Fietkau
    • [OpenWrt-Devel] Device tree issues with TL-WDR4900 (mpc85xx) and kernel 4.0.1   Roman Yeryomin
• [OpenWrt-Devel] Ralink MT76228 port to Linux 4.0, set new IP address fail   Baptiste Clenet
  • [OpenWrt-Devel] Ralink MT76228 port to Linux 4.0, set new IP address fail   Roman Yeryomin
    • [OpenWrt-Devel] Ralink MT76228 port to Linux 4.0, set new IP address fail   Baptiste Clenet
      • [OpenWrt-Devel] Ralink MT76228 port to Linux 4.0, set new IP address fail   Baptiste Clenet
      • [OpenWrt-Devel] Ralink MT76228 port to Linux 4.0, set new IP address fail   Roman Yeryomin
      • [OpenWrt-Devel] Ralink MT76228 port to Linux 4.0, set new IP address fail   Baptiste Clenet
      • [OpenWrt-Devel] Ralink MT76228 port to Linux 4.0, set new IP address fail   Roman Yeryomin
• [OpenWrt-Devel] procd "reload" vs "reload_config"   Karl Palsson
• [OpenWrt-Devel] automated builds with hardening features enabled   Daniel Golle
• [OpenWrt-Devel] OpenWrt   Stefan Agner
  • [OpenWrt-Devel] Patches/files when using external Git repo   Stefan Agner
• [OpenWrt-Devel] [PATCH v2] base-files: add /etc/profile.d support   Hendrik Lüth
  • [OpenWrt-Devel] [PATCH v2] base-files: add /etc/profile.d support   Hendrik
    • [OpenWrt-Devel] [PATCH v2] base-files: add /etc/profile.d support   Bastian Bittorf
      • [OpenWrt-Devel] [PATCH v2] base-files: add /etc/profile.d support   Hendrik
• [OpenWrt-Devel] [PATCHv2] ppp : Unnumbered support   Hans Dedecker
  • [OpenWrt-Devel] [PATCHv2] ppp : Unnumbered support   Steven Barth
  • [OpenWrt-Devel] [PATCHv2] ppp : Unnumbered support   Bastian Bittorf
• [OpenWrt-Devel] [PATCH] Combine CA-certificates in one file   micke.prag at telldus.se
  • [OpenWrt-Devel] [PATCH] Combine CA-certificates in one file   Cristian Morales Vega
  • [OpenWrt-Devel] [PATCH] Combine CA-certificates in one file   micke.prag at telldus.se
  • [OpenWrt-Devel] [PATCH] Combine CA-certificates in one file   micke.prag at telldus.se
    • [OpenWrt-Devel] [PATCH] Combine CA-certificates in one file   edgar.soldin at web.de
• [OpenWrt-Devel] downloads.openwrt.org looks down   valent.turkovic at gmail.com
  • [OpenWrt-Devel] downloads.openwrt.org looks down   valent.turkovic at gmail.com
• [OpenWrt-Devel] Possible Fix for broken hwsim on UML target   Martin Tippmann
• [OpenWrt-Devel] [PATCH v2] sysctl: read settings from /etc/sysctl.d/*.conf   Stefan Tomanek
• [OpenWrt-Devel] [PATCH] openssl: bump to 1.0.2c   Magnus Kroken
  • [OpenWrt-Devel] [PATCH] openssl: bump to 1.0.2c   Hannu Nyman
• [OpenWrt-Devel] [PATCH] b53 switch driver memory leak and reset gpio pin initialization fix   Fedor Konstantinov
  • [OpenWrt-Devel] [PATCH] b53 switch driver memory leak and reset gpio pin initialization fix   Jonas Gorski
    • [OpenWrt-Devel] [PATCH] b53 switch driver memory leak and reset gpio pin initialization fix   blmink
      • [OpenWrt-Devel] [PATCH] b53 switch driver memory leak and reset gpio pin initialization fix   Jonas Gorski
• [OpenWrt-Devel] [PATCH v3 0/2] Support Ubiquiti Unifi Outdoor Plus HSR filter   Stefan Rompf
  • [OpenWrt-Devel] [PATCH v3 1/2] [mac80211] Add "channel set helper" callback to ath9k   Stefan Rompf
    • [OpenWrt-Devel] [PATCH v3 1/2] [mac80211] Add "channel set helper" callback to ath9k   Felix Fietkau
      • [OpenWrt-Devel] [PATCH v3 1/2] [mac80211] Add "channel set helper" callback to ath9k   Stefan Rompf
      • [OpenWrt-Devel] [PATCH v3 1/2] [mac80211] Add "channel set helper" callback to ath9k   Felix Fietkau
      • [OpenWrt-Devel] [PATCH v3 1/2] [mac80211] Add "channel set helper" callback to ath9k   Stefan Rompf
  • [OpenWrt-Devel] [PATCH v3 2/2] Add kmod-ubnt-hsr tuner for the UBNT HSR filter   Stefan Rompf
• [OpenWrt-Devel] [PATCH] [ar71xx] ar934x-nfc: allow ECC to be configured in software BCH mode   Thomas Hebb
• [OpenWrt-Devel] Chaos Calmer 15.05-rc2   Steven Barth
  • [OpenWrt-Devel] Chaos Calmer 15.05-rc2   Arturo Rinaldi
    • [OpenWrt-Devel] Chaos Calmer 15.05-rc2   Rafał Miłecki
      • [OpenWrt-Devel] Chaos Calmer 15.05-rc2   Arturo Rinaldi
  • [OpenWrt-Devel] Chaos Calmer 15.05-rc2   Fernando Frediani
    • [OpenWrt-Devel] Chaos Calmer 15.05-rc2   Steven Barth
    • [OpenWrt-Devel] Chaos Calmer 15.05-rc2   Fernando Frediani
  • [OpenWrt-Devel] Chaos Calmer 15.05-rc2   Sedat Dilek
  • [OpenWrt-Devel] Chaos Calmer 15.05-rc2   Daniel Golle
    • [OpenWrt-Devel] Chaos Calmer 15.05-rc2   Luiz Angelo Daros de Luca
      • [OpenWrt-Devel] Chaos Calmer 15.05-rc2   Gui Iribarren
      • [OpenWrt-Devel] Chaos Calmer 15.05-rc2   Luiz Angelo Daros de Luca
  • [OpenWrt-Devel] Chaos Calmer 15.05-rc2   jvasco at verizon.net
• [OpenWrt-Devel] [PATCH 1/3] openvpn: fix handling comp_lzo and auth_retry as the wrong type.   Yousong Zhou
  • [OpenWrt-Devel] [PATCH 2/3] openvpn: let instances drop to nobody in default config.   Yousong Zhou
  • [OpenWrt-Devel] [PATCH 3/3] openvpn: bump PKG_RELEASE.   Yousong Zhou
    • [OpenWrt-Devel] [PATCH 3/3] openvpn: bump PKG_RELEASE.   Gert Doering
  • [OpenWrt-Devel] [PATCH 1/3] openvpn: fix handling comp_lzo and auth_retry as the wrong type.   Felix Fietkau
    • [OpenWrt-Devel] [PATCH 1/3] openvpn: fix handling comp_lzo and auth_retry as the wrong type.   Yousong Zhou
• [OpenWrt-Devel] [PATCH] ar71xx: add support for TL-WR720N-v4.   Yousong Zhou
• [OpenWrt-Devel] [PATCH] procd: correct the order of respawn params in the comments.   Yousong Zhou
• [OpenWrt-Devel] [PATCH] firmware-tools/ptgen: fix endianness conversion for PTE .start, .length field.   Yousong Zhou
• [OpenWrt-Devel] [PATCH 0/5] procd: a few cleanup and fixes   Yousong Zhou
  • [OpenWrt-Devel] [PATCH 1/5] service: optimize relaying stdio output of daemons a bit.   Yousong Zhou
  • [OpenWrt-Devel] [PATCH 2/5] service: dump respawn params in the same order as when passed in.   Yousong Zhou
  • [OpenWrt-Devel] [PATCH 3/5] service: remove unused struct watch_subscribe definition.   Yousong Zhou
  • [OpenWrt-Devel] [PATCH 4/5] service: allow get_data of specifc instance.   Yousong Zhou
  • [OpenWrt-Devel] [PATCH 5/5] service: close instance pipe fd on restart.   Yousong Zhou
• [OpenWrt-Devel] [PATCH] oxnas: change file extension of u-boot+initramfs image   Daniel Golle
• [OpenWrt-Devel] Method to load firmware blob for a particular router model   Alpha Sparc
  • [OpenWrt-Devel] Method to load firmware blob for a particular router model   Marc Nicholas
    • [OpenWrt-Devel] Method to load firmware blob for a particular router model   Alpha Sparc
      • [OpenWrt-Devel] Method to load firmware blob for a particular router model   Alpha Sparc
      • [OpenWrt-Devel] Method to load firmware blob for a particular router model   Jo-Philipp Wich
    • [OpenWrt-Devel] fsf compliant kernel in OpenWrt trunk?   Daniel Petre
• [OpenWrt-Devel] [PATCH v2 1/3] openvpn: fix handling option auth_retry.   Yousong Zhou
  • [OpenWrt-Devel] [PATCH v2 2/3] openvpn: let instances drop to nobody in default config.   Yousong Zhou
  • [OpenWrt-Devel] [PATCH v2 3/3] openvpn: bump PKG_RELEASE.   Yousong Zhou
• [OpenWrt-Devel] [PATCH 1/2] ar71xx: fix ethernet for 4.0   Roman Yeryomin
• [OpenWrt-Devel] [PATCH 2/2] ar71xx: add 4.0 support   Roman Yeryomin
  • [OpenWrt-Devel] [PATCH 2/2] ar71xx: add 4.0 support   Roman Yeryomin
    • [OpenWrt-Devel] [PATCH 2/2] ar71xx: add 4.0 support   Daniel Golle
      • [OpenWrt-Devel] [PATCH 2/2] ar71xx: add 4.0 support   Roman Yeryomin
• [OpenWrt-Devel] [PATCH 3/5] elfutils: import package from packages.git   Felix Fietkau
  • [OpenWrt-Devel] [PATCH 3/5] elfutils: import package from packages.git   Luiz Angelo Daros de Luca
• [OpenWrt-Devel] [PATCH 2/5] argp-standalone: import package from packages.git   Felix Fietkau
• [OpenWrt-Devel] [PATCH 5/5] perf: remove EGLIBC dependency   Felix Fietkau
• [PATCH] Add support for WeIO board   Drasko DRASKOVIC
• [OpenWrt-Devel] procd/libubox mangles command-line arguments   Ted Hess
  • [OpenWrt-Devel] procd/libubox mangles command-line arguments   Yousong Zhou
    • [OpenWrt-Devel] procd/libubox mangles command-line arguments   Ted Hess
• [OpenWrt-Devel] Lantiq xrx200 - switch rtl8367rb controlled via builtin mdio (not gpio sck/sda!) in EasyBox 904xDSL   Arnold Schulz
  • [OpenWrt-Devel] Lantiq xrx200 - switch rtl8367rb controlled via builtin mdio (not gpio sck/sda!) in EasyBox 904xDSL   Jonas Gorski
• [OpenWrt-Devel] reproducible OpenWrt?   Holger Levsen
  • [OpenWrt-Devel] reproducible OpenWrt?   John Crispin
    • [OpenWrt-Devel] reproducible OpenWrt?   Holger Levsen
      • [OpenWrt-Devel] reproducible OpenWrt?   John Crispin
• [OpenWrt-Devel] [PATCH] Add Support for WeIO Board (Chaos Calmer)   Drasko DRASKOVIC
  • [OpenWrt-Devel] [PATCH] Add Support for WeIO Board (Chaos Calmer)   Florian Fainelli
  • [OpenWrt-Devel] [PATCH] Add Support for WeIO Board (Chaos Calmer)   John Crispin
    • [OpenWrt-Devel] [PATCH] Add Support for WeIO Board (Chaos Calmer)   Drasko DRASKOVIC
  • [OpenWrt-Devel] [PATCH] Add Support for WeIO Board (Chaos Calmer)   Drasko DRASKOVIC
    • [OpenWrt-Devel] [PATCH] Add Support for WeIO Board (Chaos Calmer)   Karl Palsson
      • [OpenWrt-Devel] [PATCH] Add Support for WeIO Board (Chaos Calmer)   Drasko DRASKOVIC
• [OpenWrt-Devel] [PATCH] Update dnsmasq to v2.73.   Toke Høiland-Jørgensen
  • [OpenWrt-Devel] [PATCH] Update dnsmasq to v2.73.   Toke Høiland-Jørgensen
  • [OpenWrt-Devel] [PATCH] Update dnsmasq to v2.73.   Steven Barth
• [OpenWrt-Devel] [PATCH 2/5] argp-standalone: import   Ted Hess
• [OpenWrt-Devel] [PATCH] openvpn: bump to 2.3.7.   Yousong Zhou
  • [OpenWrt-Devel] [PATCH] openvpn: bump to 2.3.7.   Felix Fietkau
• [OpenWrt-Devel] [PATCH] x86/xen_domu: enable image generation   Luiz Angelo Daros de Luca
• [OpenWrt-Devel] [PATCH] elfutils: bump to 0.162   Luiz Angelo Daros de Luca
• [OpenWrt-Devel] jffs2 CRC failed (many times after reboot) - Ralink MT7628   Baptiste Clenet
  • [OpenWrt-Devel] jffs2 CRC failed (many times after reboot) - Ralink MT7628   Baptiste Clenet
    • [OpenWrt-Devel] jffs2 CRC failed (many times after reboot) - Ralink MT7628   Baptiste Clenet
• [OpenWrt-Devel] Package list signing keys: Does the release build system use different keys than snapshots?   Hannu Nyman
• [OpenWrt-Devel] [PATCH v2] ar71xx: add 4.0 support   Roman Yeryomin
• [OpenWrt-Devel] OpenWrt switches to musl by default   Felix Fietkau
  • [OpenWrt-Devel] OpenWrt switches to musl by default   Jonathan Bennett
    • [OpenWrt-Devel] OpenWrt switches to musl by default   Rafał Miłecki
      • [OpenWrt-Devel] OpenWrt switches to musl by default   Jonathan Bennett
• [OpenWrt-Devel] firewall instead of routing rules to keep ULAs from escaping   Brian J. Murrell
  • [OpenWrt-Devel] firewall instead of routing rules to keep ULAs from escaping   Steven Barth
    • [OpenWrt-Devel] firewall instead of routing rules to keep ULAs from escaping   Brian J. Murrell
      • [OpenWrt-Devel] firewall instead of routing rules to keep ULAs from escaping   Steven Barth
      • [OpenWrt-Devel] firewall instead of routing rules to keep ULAs from escaping   Brian J. Murrell
      • [OpenWrt-Devel] firewall instead of routing rules to keep ULAs from escaping   Steven Barth
      • [OpenWrt-Devel] firewall instead of routing rules to keep ULAs from escaping   Brian J. Murrell
• [OpenWrt-Devel] [PATCH] Add support for PandoraBox PBR-M1 Board   Tymon
  • [OpenWrt-Devel] [PATCH] Add support for PandoraBox PBR-M1 Board   Felix Fietkau
• [OpenWrt-Devel] Renaming trunk to Dxx Dxx ?   Hannu Nyman
  • [OpenWrt-Devel] Renaming trunk to Dxx Dxx ?   Daniel Golle
• [OpenWrt-Devel] [PATCH] kernel: mitigate cgroups config dependency changes   Daniel Golle
  • [OpenWrt-Devel] [PATCH] kernel: mitigate cgroups config dependency changes   Felix Fietkau
    • [OpenWrt-Devel] [PATCH v2] kernel: mitigate cgroups config dependency changes   Daniel Golle
• [OpenWrt-Devel] [PATCH] musl: provide wtmp compatibility stub for Linux-PAM.   Yousong Zhou
  • [OpenWrt-Devel] [PATCH] musl: provide wtmp compatibility stub for Linux-PAM.   Felix Fietkau
• [OpenWrt-Devel] [PATCH] Add support for WeIO board   Drasko DRASKOVIC
  • [OpenWrt-Devel] [PATCH] Add support for WeIO board   Florian Fainelli
  • [OpenWrt-Devel] [PATCH] Add support for WeIO board   Drasko DRASKOVIC
• [OpenWrt-Devel] [PATCH v4 0/2] Support Ubiquiti Unifi Outdoor Plus HSR filter   Stefan Rompf
  • [OpenWrt-Devel] [PATCH v4 1/2] Add ubnt_hsr platform flag and enable for UniFi Outdoor Plus   Stefan Rompf
  • [OpenWrt-Devel] [PATCH v4 2/2] Add HSR tuner to ath9k   Stefan Rompf
• [OpenWrt-Devel] [PATCH] cyassl: version bump   Daniel Gimpelevich
• [OpenWrt-Devel] [PATCH] [generic] ramips: adding support for OYE-0001 Wireless Router   younfan33
  • [OpenWrt-Devel] [PATCH] [generic] ramips: adding support for OYE-0001 Wireless Router   Bastian Bittorf
  • [OpenWrt-Devel] [PATCH] [generic] ramips: adding support for OYE-0001 Wireless Router   younfan33
  • [OpenWrt-Devel] [PATCH] [generic] ramips: adding support for OYE-0001 Wireless Router   younfan33
    • [OpenWrt-Devel] [PATCH] [generic] ramips: adding support for OYE-0001 Wireless Router   Rafał Miłecki
    • [OpenWrt-Devel] [PATCH] [generic] ramips: adding support for OYE-0001 Wireless Router   John Crispin
• [OpenWrt-Devel] [PATCH procd] fix /dev/shm permissions   Daniel Gimpelevich
  • [OpenWrt-Devel] [PATCH procd] fix /dev/shm permissions, this time for real   Daniel Gimpelevich
• [OpenWrt-Devel] [PATCH] brcm47xx: drop global description in favour of subtarget ones   Rafał Miłecki
• [OpenWrt-Devel] [PATCH v2] openvpn: bump to 2.3.7.   Yousong Zhou
• [OpenWrt-Devel] [PATCH] ipkg-build: suppress timestamps in gzip headers   Reiner Herrmann
• [OpenWrt-Devel] [PATCH] libusb-compat: fix build with musl   Álvaro Fernández Rojas
  • [OpenWrt-Devel] [PATCH] libusb-compat: fix build with musl   Jo-Philipp Wich
    • [OpenWrt-Devel] [PATCH] libusb-compat: fix build with musl   Álvaro Fernández Rojas
      • [OpenWrt-Devel] [PATCH] libusb-compat: fix build with musl   Jo-Philipp Wich
• [OpenWrt-Devel] [PATCH] Add support for WeIO board. WeIO board (http://we-io.net) is based on Carambola2 module from 8Devices, and the patch adds a separate profile.   Drasko DRASKOVIC
  • [OpenWrt-Devel] [PATCH] Add support for WeIO board. WeIO board (http://we-io.net) is based on Carambola2 module from 8Devices, and the patch adds a separate profile.   Karl Palsson
• [OpenWrt-Devel] [PATCH] ramips: add support for PandoraBox PBR-M1   tymon
• [OpenWrt-Devel] opkg.conf as preserved config file in sysupgrade is creating problems (especially after package signing)   Hannu Nyman
  • [OpenWrt-Devel] opkg.conf as preserved config file in sysupgrade is creating problems (especially after package signing)   Bastian Bittorf
• [OpenWrt-Devel] fixed a ubusd.c segment fault problem   yangchao
  • [OpenWrt-Devel] fixed a ubusd.c segment fault problem   Rafał Miłecki
• [OpenWrt-Devel] How to keep disabled services disabled after sysupgrade   Stefan Tomanek
  • [OpenWrt-Devel] How to keep disabled services disabled after sysupgrade   Hannu Nyman
  • [OpenWrt-Devel] How to keep disabled services disabled after sysupgrade   Bastian Bittorf
    • [OpenWrt-Devel] How to keep disabled services disabled after sysupgrade   Stefan Tomanek
      • [OpenWrt-Devel] How to keep disabled services disabled after sysupgrade   Etienne Champetier
  • [OpenWrt-Devel] How to keep disabled services disabled after sysupgrade   Saso Slavicic
• [OpenWrt-Devel] [PATCH] [package] ubus: fixed a segent fault problem   yangchao1p at live.com
• [OpenWrt-Devel] broken feeds/packages in 15.05-rc2   John Crispin
• [OpenWrt-Devel] [PATCH v3] base-files: add /etc/profile.d support   Hendrik Lüth
• [OpenWrt-Devel] [PATCH] Fixes regarding bridge multicast-to-unicast feature   Linus Lüssing
  • [OpenWrt-Devel] [PATCH netifd 1/2] bridge: Fix multicast_to_unicast feature by hairpin+isolate   Linus Lüssing
  • [OpenWrt-Devel] [PATCH netifd 2/2] bridge: Allow setting multicast_router option   Linus Lüssing
  • [OpenWrt-Devel] [PATCH openwrt 1/3] hostapd: Always isolate if brport->multicast_to_unicast is enabled   Linus Lüssing
  • [OpenWrt-Devel] [PATCH openwrt 2/3] Revert "kernel: disable multicast-to-unicast translation for ipv6 neighbor solicitation (#17625)"   Linus Lüssing
  • [OpenWrt-Devel] [PATCH openwrt 3/3] kernel: bridge, multicast-to-unicast: assign src after pskb_may_pull()   Linus Lüssing
• [OpenWrt-Devel] [PATCH 1/4] swconfig: swlib.c: free device name and alias   Alexandru Ardelean
  • [OpenWrt-Devel] [PATCH 2/4] swconfig: swlib.c: remove const qualifier for val.s since this is supposed to be free'd   Alexandru Ardelean
  • [OpenWrt-Devel] [PATCH 3/4] swconfig: swlib.c: free portmaps in swlib_free()   Alexandru Ardelean
  • [OpenWrt-Devel] [PATCH 4/4] swconfig: swlib.c: free name and description of attributes   Alexandru Ardelean
• [OpenWrt-Devel] [PATCH 0/3] [RFC] ar71xx: Add support for EnGenius EPG5000   Christian Beier
  • [OpenWrt-Devel] [PATCH 1/3] ar71xx: add kernel support for EnGenius EPG5000.   Christian Beier
  • [OpenWrt-Devel] [PATCH 2/3] ar71xx: add user-space support for EnGenius EPG5000.   Christian Beier
  • [OpenWrt-Devel] [PATCH 3/3] ar71xx: add profile and build image for EnGenius EPG5000.   Christian Beier
• [OpenWrt-Devel] [PATCH] ar71xx: Enable sysupgrade on the Bitmain Antminer S1   L. D. Pinney
• [OpenWrt-Devel] [PATCH] [PATCH] x86: add kmod-acpi-button and kmod-button-hotplug to default packages   Stefan Hellermann
• [OpenWrt-Devel] [PATCH procd] service: use PTY (instead of a pipe) for reading service output   Rafał Miłecki
  • [OpenWrt-Devel] [PATCH procd] service: use PTY (instead of a pipe) for reading service output   Yousong Zhou
    • [OpenWrt-Devel] [PATCH procd] service: use PTY (instead of a pipe) for reading service output   Rafał Miłecki
      • [OpenWrt-Devel] [PATCH procd] service: use PTY (instead of a pipe) for reading service output   Jo-Philipp Wich
      • [OpenWrt-Devel] [PATCH procd] service: use PTY (instead of a pipe) for reading service output   Yousong Zhou
• [OpenWrt-Devel] [PATCH procd] service: start apps with LD_PRELOAD & lib disabling buffering   Rafał Miłecki
  • [OpenWrt-Devel] [PATCH procd] service: start apps with LD_PRELOAD & lib disabling buffering   Paul Fertser
  • [OpenWrt-Devel] [PATCH procd] service: start apps with LD_PRELOAD & lib disabling buffering   John Crispin
    • [OpenWrt-Devel] [PATCH procd] service: start apps with LD_PRELOAD & lib disabling buffering   Jo-Philipp Wich
      • [OpenWrt-Devel] [PATCH procd] service: start apps with LD_PRELOAD & lib disabling buffering   Rafał Miłecki
      • [OpenWrt-Devel] [PATCH procd] service: start apps with LD_PRELOAD & lib disabling buffering   John Crispin
      • [OpenWrt-Devel] [PATCH procd] service: start apps with LD_PRELOAD & lib disabling buffering   Etienne Champetier
      • [OpenWrt-Devel] [PATCH procd] service: start apps with LD_PRELOAD & lib disabling buffering   John Crispin
  • [OpenWrt-Devel] [PATCH V2 procd] service: start apps with LD_PRELOAD & lib for line buffering   Rafał Miłecki
• [OpenWrt-Devel] [PATCH 1/3] phy/at803x: fix null-pointer access when platform data isn't set   Alexander Couzens
  • [OpenWrt-Devel] [PATCH 2/3] ar71xx: allow pci calibration fixup to work with ar9344   Alexander Couzens
  • [OpenWrt-Devel] [PATCH 3/3] ar71xx: add support for ubnt rocket-m ti   Alexander Couzens
• [OpenWrt-Devel] otrx: musl (?) compiles it as for big endian arch on bcm53xx   Rafał Miłecki
  • [OpenWrt-Devel] otrx: musl (?) compiles it as for big endian arch on bcm53xx   Szabolcs Nagy
• [OpenWrt-Devel] Chaos Calmer USB issue   Angelo Corsaro
• [OpenWrt-Devel] [PATCH] linux-3.18: prevent redefinition of struct ethhdr   Alejandro Mery
  • [OpenWrt-Devel] [PATCH] linux-3.18: prevent redefinition of struct ethhdr   Karl Palsson
    • [OpenWrt-Devel] [PATCH] linux-3.18: prevent redefinition of struct ethhdr   Alejandro Mery
      • [OpenWrt-Devel] [PATCH] linux-3.18: prevent redefinition of struct ethhdr   Alejandro Mery
• [OpenWrt-Devel] rt3883 iNIC subsystem - any chance to get this running (Easybox 904 xDSL, Zyxel NBG5715)   Arnold Schulz
• [OpenWrt-Devel] [PATCH 6/6] bcm53xx: R8000 handle PEX8603 switch   Rafał Miłecki
  • [OpenWrt-Devel] [PATCH 6/6] bcm53xx: R8000 handle PEX8603 switch   Ian Kent
    • [OpenWrt-Devel] [PATCH 6/6] bcm53xx: R8000 handle PEX8603 switch   Hauke Mehrtens
      • [OpenWrt-Devel] [PATCH 6/6] bcm53xx: R8000 handle PEX8603 switch   Rafał Miłecki
  • [OpenWrt-Devel] [PATCH 6/6] bcm53xx: R8000 handle PEX8603 switch   Hauke Mehrtens
    • [OpenWrt-Devel] [PATCH 6/6] bcm53xx: R8000 handle PEX8603 switch   Ian Kent
      • [OpenWrt-Devel] [PATCH 6/6] bcm53xx: R8000 handle PEX8603 switch   Ian Kent
• [OpenWrt-Devel] [PATCH] ramips: a5-v11 board fix power led blinking at boot.   Konrad Kotowicz
• [OpenWrt-Devel] [PATCH] elfutils: bump to 0.163   Luiz Angelo Daros de Luca
• [OpenWrt-Devel] [PATCH] ar71xx: Fix WAN port location on EnGenius ESR1750 and EPG5000.   Christian Beier
  • [OpenWrt-Devel] [PATCH] ar71xx: Fix WAN port location on EnGenius ESR1750 and EPG5000.   Christian Beier
• [OpenWrt-Devel] musl breaks python   micke.prag at telldus.se
  • [OpenWrt-Devel] musl breaks python   Alexandru Ardelean
  • [OpenWrt-Devel] musl breaks python   Szabolcs Nagy
    • [OpenWrt-Devel] musl breaks python   Alexandru Ardelean
• [OpenWrt-Devel] [PATCH] ar71xx: add LED defaults for the EnGenius EPG5000   Christian Beier
• [OpenWrt-Devel] [PATCH] [brcm47xx] Belkin F7DXXXX (BCM47XX based) support for Linux 3.18   Joseph East
  • [OpenWrt-Devel] [PATCH] [brcm47xx] Belkin F7DXXXX (BCM47XX based) support for Linux 3.18   Joseph East
    • [OpenWrt-Devel] [PATCH] [brcm47xx] Belkin F7DXXXX (BCM47XX based) support for Linux 3.18   Hauke Mehrtens
  • [OpenWrt-Devel] [PATCH] [brcm47xx] Belkin F7DXXXX (BCM47XX based) support for Linux 3.18   Rafał Miłecki
    • [OpenWrt-Devel] [PATCH] [brcm47xx] Belkin F7DXXXX (BCM47XX based) support for Linux 3.18   Joseph East
      • [OpenWrt-Devel] [PATCH] [brcm47xx] Belkin F7DXXXX (BCM47XX based) support for Linux 3.18   Joseph East
• [OpenWrt-Devel] [PATCH 0/2] mac80211: Update QCA9880 firmware (ath10k)   Matti Laakso
  • [OpenWrt-Devel] [PATCH 1/2] mac80211: Backport ath10k firmware API v5 support   Matti Laakso
  • [OpenWrt-Devel] [PATCH 2/2] mac80211: Update QCA9880 firmware to 10.2.4.70-2   Matti Laakso
  • [OpenWrt-Devel] [PATCH 0/2] mac80211: Update QCA9880 firmware (ath10k)   Stijn Tintel
    • [OpenWrt-Devel] [PATCH 0/2] mac80211: Update QCA9880 firmware (ath10k)   Matti Laakso
      • [OpenWrt-Devel] [PATCH 0/2] mac80211: Update QCA9880 firmware (ath10k)   Imre Kaloz
      • [OpenWrt-Devel] [PATCH 0/2] mac80211: Update QCA9880 firmware (ath10k)   Martin Blumenstingl
      • [OpenWrt-Devel] [PATCH 0/2] mac80211: Update QCA9880 firmware (ath10k)   Imre Kaloz
      • [OpenWrt-Devel] [PATCH 0/2] mac80211: Update QCA9880 firmware (ath10k)   Matti Laakso
  • [OpenWrt-Devel] [PATCH 0/3 v2] mac80211: Update QCA9880 firmware (ath10k)   Matti Laakso
    • [OpenWrt-Devel] [PATCH 1/3 v2] mac80211: Backport ath10k firmware API v5 support   Matti Laakso
    • [OpenWrt-Devel] [PATCH 2/3 v2] mac80211: Update QCA9880 firmware to 10.2.4.70-2   Matti Laakso
    • [OpenWrt-Devel] [PATCH] ar71xx: update preinit script for new ath10k firmware   Matti Laakso
• [OpenWrt-Devel] Issue when creating rootfs images with parallel jobs   Michael Heimpold
• [OpenWrt-Devel] Why OpenWrt sucks?   Mitar
• [OpenWrt-Devel] Controlling POE passthrough via GPIO   Lars Kruse
  • [OpenWrt-Devel] Controlling POE passthrough via GPIO   Florian Fainelli
  • [OpenWrt-Devel] Controlling POE passthrough via GPIO   John Crispin
• [OpenWrt-Devel] oldpackages for CC   Saso Slavicic
  • [OpenWrt-Devel] oldpackages for CC   Steven Barth
    • [OpenWrt-Devel] oldpackages for CC   Karl Palsson
      • [OpenWrt-Devel] oldpackages for CC   John Crispin
• [OpenWrt-Devel] [PATCH] px5g-standalone: fix compilation after fortify-headers   Hannu Nyman
  • [OpenWrt-Devel] [PATCH] px5g-standalone: fix compilation after fortify-headers   Szabolcs Nagy
• [OpenWrt-Devel] Alsa-lib (libasound) segfaults on TLS variable (musl on mips)   Ted Hess
  • [OpenWrt-Devel] Alsa-lib (libasound) segfaults on TLS variable (musl on mips)   Szabolcs Nagy
    • [OpenWrt-Devel] Alsa-lib (libasound) segfaults on TLS variable (musl on mips)   Szabolcs Nagy
• [OpenWrt-Devel] [PATCH] uml: fix mac80211 hwim for uml   Martin Tippmann
  • [OpenWrt-Devel] [PATCH] uml: fix mac80211 hwim for uml   {Nico}
• [OpenWrt-Devel] Build ERRORS : Ubiquiti EdgeRouter Lite   openwrt-devel at couprie.net
• [OpenWrt-Devel] Revert 46119 (hardening: make override variables more intuitive)   Etienne Champetier
  • [OpenWrt-Devel] Revert 46119 (hardening: make override variables more intuitive)   Steven Barth
    • [OpenWrt-Devel] Revert 46119 (hardening: make override variables more intuitive)   Etienne Champetier
• [OpenWrt-Devel] [PATCH] mac80211: ath9k: fix qca956x name also   Roman Yeryomin
• [OpenWrt-Devel] GNUnet for Battlemesh   demos
• [OpenWrt-Devel] [PATCH v2] [package] grub2: disable stack-protector   Dirk Neukirchen
  • [OpenWrt-Devel] [PATCH v2] [package] grub2: disable stack-protector   Jo-Philipp Wich
• [OpenWrt-Devel] [PATCH] [package] grub2: fix musl build   Dirk Neukirchen
  • [OpenWrt-Devel] [PATCH] [package] grub2: fix musl build   Jo-Philipp Wich
• [OpenWrt-Devel] mac80211: remove wlcore patch   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH] toolchain: binutils: enhance build reproducability   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH] [package] strace: update to 4.10   Dirk Neukirchen
  • [OpenWrt-Devel] [PATCH] [package] strace: update to 4.10   Jo-Philipp Wich
• [OpenWrt-Devel] [PATCH] netifd: Add dadtransmits config option   Hans Dedecker
• [OpenWrt-Devel] [PATCH] ar71xx: Allow to use ath79_gpio_output_select on QCA955x   Sven Eckelmann
• [OpenWrt-Devel] [PATCH] ar71xx: Use *_eth_cfg helper for Open Mesh MR900 boards   Sven Eckelmann
• [OpenWrt-Devel] [PATCH] mips: Free memory when load_module fails (#14453)   Sven Eckelmann
• [OpenWrt-Devel] Presentation on Linux Containers (LXC)   Eric Schultz
  • [OpenWrt-Devel] Presentation on Linux Containers (LXC)   Javier Domingo Cansino
    • [OpenWrt-Devel] Presentation on Linux Containers (LXC)   Bastian Bittorf
• [OpenWrt-Devel] [PATCH] ar71xx: add support for TL-WR741ND v5   Matthias Schiffer
• [OpenWrt-Devel] [PATCH] ramips mt7620 Archer C20i USB support   Gunnar Thorburn
• [OpenWrt-Devel] [PATCH] Deal with allocation errors in a few missing places.   Juliusz Chroboczek
  • [OpenWrt-Devel] [PATCH] Deal gracefully with allocation failures in a few omitted places.   Juliusz Chroboczek
  • [OpenWrt-Devel] [PATCH 1/2] Provide meaningful error messages when fork fails.   Juliusz Chroboczek
    • [OpenWrt-Devel] [PATCH 2/2] Attempt to deal gracefully with allocation failures.   Juliusz Chroboczek
• [OpenWrt-Devel] Fwd: [packages] netifd: NULL device on network restart (#1476)   Alexandru Ardelean
• [OpenWrt-Devel] alternative for "pyserial+python-mini"   valent.turkovic at gmail.com
  • [OpenWrt-Devel] alternative for "pyserial+python-mini"   valent.turkovic at gmail.com
    • [OpenWrt-Devel] alternative for "pyserial+python-mini"   Alexandru Ardelean
      • [OpenWrt-Devel] alternative for "pyserial+python-mini"   micke.prag at telldus.se
  • [OpenWrt-Devel] alternative for "pyserial+python-mini"   Christian Mehlis
• [OpenWrt-Devel] beacon_int not working in Chaos Calmer in adhoc   Ben West
• [OpenWrt-Devel] [PATCH 1/2] ar71xx: Unify ath10k calibration data loading   Matti Laakso
  • [OpenWrt-Devel] [PATCH 2/2] mac80211: Drop ath10k workaround for providing calibration data   Matti Laakso
• [OpenWrt-Devel] An interesting feature request   Jonathan Bennett
  • [OpenWrt-Devel] An interesting feature request   Jonathan Bennett
• [OpenWrt-Devel] HT modes apparently not working in adhoc under Barrier Breaker   Ben West
  • [OpenWrt-Devel] HT modes apparently not working in adhoc under Barrier Breaker   Ben West
• [OpenWrt-Devel] [PATCH 0/3] lantiq: Initial support for linux 4.1   Martin Blumenstingl
  • [OpenWrt-Devel] [PATCH 1/3] Add support for linux 4.1   Martin Blumenstingl
  • [OpenWrt-Devel] [PATCH 2/3] lantiq: Make ltq-ifxos compile with kernel 4.1   Martin Blumenstingl
  • [OpenWrt-Devel] [PATCH 3/3] lantiq: Make ATM and PTM drivers compatible with kernel 4.1   Martin Blumenstingl
• [OpenWrt-Devel] [PATCH 1/2] lantiq: Change the data-type of mac address in ETOP driver   Martin Blumenstingl
  • [OpenWrt-Devel] [PATCH 2/2] generic: Allow configuring an increment with mtd-mac-address   Martin Blumenstingl
• [OpenWrt-Devel] [PATCH] lantiq: Add support for the BT Home Hub 5A   Martin Blumenstingl
  • [OpenWrt-Devel] [PATCH V2] lantiq: Add support for the BT Home Hub 5A   Martin Blumenstingl
• [OpenWrt-Devel] [PATCH] lantiq: Make the MEI address available for kernel drivers   Martin Blumenstingl
• [OpenWrt-Devel] Patch to enable RFKill and USB Power GPIO for tl-wdr4900v1   Alpha Sparc
• [OpenWrt-Devel] Chaos Calmer regression in RC2 - MediaTek MT7621   Christian Mehlis
  • [OpenWrt-Devel] Chaos Calmer regression in RC2 - MediaTek MT7621   John Crispin
    • [OpenWrt-Devel] Chaos Calmer regression in RC2 - MediaTek MT7621   Christian Mehlis
      • [OpenWrt-Devel] Chaos Calmer regression in RC2 - MediaTek MT7621   John Crispin
      • [OpenWrt-Devel] Chaos Calmer regression in RC2 - MediaTek MT7621   Christian Mehlis
      • [OpenWrt-Devel] Chaos Calmer regression in RC2 - MediaTek MT7621   John Crispin
• [OpenWrt-Devel] [PATCH] Improve wifi speed up to 2 times in AP mode.   N.Leiten
  • [OpenWrt-Devel] [PATCH] Improve wifi speed up to 2 times in AP mode.   Linus Lüssing
    • [OpenWrt-Devel] [PATCH] Improve wifi speed up to 2 times in AP mode.   N.Leiten
      • [OpenWrt-Devel] [PATCH] Improve wifi speed up to 2 times in AP mode.   N.Leiten
• [OpenWrt-Devel] SSL/TLS crypto library headaches   Daniel Golle
• [OpenWrt-Devel] [PATCH] mtd: spi-nor: Add support for Spansion S25FL164K   L. D. Pinney
  • [OpenWrt-Devel] [PATCH] mtd: spi-nor: Add support for Spansion S25FL164K   Rafał Miłecki
    • [OpenWrt-Devel] [PATCH] mtd: spi-nor: Add support for Spansion S25FL164K   Rafał Miłecki
      • [OpenWrt-Devel] [PATCH] mtd: spi-nor: Add support for Spansion S25FL164K   John Crispin
      • [OpenWrt-Devel] [PATCH] mtd: spi-nor: Add support for Spansion S25FL164K   Rafał Miłecki
      • [OpenWrt-Devel] [PATCH] mtd: spi-nor: Add support for Spansion S25FL164K   L. D. Pinney
• [OpenWrt-Devel] [PATCH] ar71xx:Add Support for the Bitmain Antminer S3   L. D. Pinney
• [OpenWrt-Devel] [PATCH] linux:generic: mtd backport for Spansion S25FL164K   L. D. Pinney
  • [OpenWrt-Devel] [PATCH] linux:generic: mtd backport for Spansion S25FL164K   Rafał Miłecki
    • [OpenWrt-Devel] [PATCH] linux:generic: mtd backport for Spansion S25FL164K   L. D. Pinney
      • [OpenWrt-Devel] [PATCH] linux:generic: mtd backport for Spansion S25FL164K   Rafał Miłecki
      • [OpenWrt-Devel] [PATCH] linux:generic: mtd backport for Spansion S25FL164K   Rafał Miłecki
• [OpenWrt-Devel] iwinfo lua scanlist issue   Peter Uithoven
  • [OpenWrt-Devel] iwinfo lua scanlist issue   Jo-Philipp Wich
    • [OpenWrt-Devel] iwinfo lua scanlist issue   Peter Uithoven
      • [OpenWrt-Devel] iwinfo lua scanlist issue   Jo-Philipp Wich
  • [OpenWrt-Devel] Fwd: iwinfo lua scanlist issue   Peter Uithoven
    • [OpenWrt-Devel] Fwd: iwinfo lua scanlist issue   Bastian Bittorf
      • [OpenWrt-Devel] Fwd: iwinfo lua scanlist issue   Peter Uithoven
      • [OpenWrt-Devel] Fwd: iwinfo lua scanlist issue   Bastian Bittorf
• [OpenWrt-Devel] [PATCH] ar71xx: Add support for The QCA AP147-010 reference board   Sven Eckelmann
• [OpenWrt-Devel] [PATCH] This patch fixes a line that appears to clear beacon_int variable, prevent setting beacon interval for adhoc.   ben
  • [OpenWrt-Devel] [PATCH] This patch fixes a line that appears to clear beacon_int variable, prevent setting beacon interval for adhoc.   Bastian Bittorf
• [OpenWrt-Devel] [PATCH V3] linux:generic: mtd backport for Spansion S25FL164K   L. D. Pinney
• [OpenWrt-Devel] [PATCH V4] linux:generic: mtd backport for Spansion S25FL164K   L. D. Pinney
• [OpenWrt-Devel] [PATCH] hostapd netifd wmm configuration for speedup wifi.   N.Leiten
• [OpenWrt-Devel] iproute2/tc does not apply or show filters   Bastian Bittorf
• [OpenWrt-Devel] m25p80: change en25q64 to w25q128   Baptiste Clenet
  • [OpenWrt-Devel] m25p80: change en25q64 to w25q128   Rafał Miłecki
    • [OpenWrt-Devel] m25p80: change en25q64 to w25q128   Baptiste Clenet
• [OpenWrt-Devel] [PATCH] lantiq: Silence the printk when a PCIe error interrupt arrives   Martin Blumenstingl
• [OpenWrt-Devel] Huawei 3372 NCM support on CC not working   chrono
  • [OpenWrt-Devel] Huawei 3372 NCM support on CC not working   Matti Laakso
• [OpenWrt-Devel] [PATCH] ar71xx: add support for the devolo dLAN pro 500 Wireless+   Günther Kelleter
• [OpenWrt-Devel] [PATCH] ar71xx: fix kernel Oops in at803x_link_change_notify   Sven Eckelmann
  • [OpenWrt-Devel] [PATCH] ar71xx: fix kernel Oops in at803x_link_change_notify   Alexander Couzens
• [OpenWrt-Devel] Where is the maximum binary size defined for each board?   Baptiste Clenet
  • [OpenWrt-Devel] Where is the maximum binary size defined for each board?   N.Leiten
    • [OpenWrt-Devel] Where is the maximum binary size defined for each board?   Baptiste Clenet
• [OpenWrt-Devel] Wifi Defaults   Eric Schultz
• [OpenWrt-Devel] [PATCH] implemented basic GPIO control   Lars Kruse

Last message date: Tue Jun 30 20:49:56 EDT 2015
Archived on: Thu Jun 25 05:56:12 EDT 2020

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...