[OpenWrt-Devel] lantiq DSL drivers / firmware info

[Aleksander Wałęski]

Try playing with /etc/init.d/dsl_control when you'll have a moment to
spare to see if all parameters it passes to control application are
necessary. Selecting between ADSL and VDSL may be necessary but
firmware for ADSL seems to be annex-specific and I think that each
step we can make towards simplifying configuration will be welcomed.

On Thu, Jun 4, 2015 at 10:30 PM, Martin Blumenstingl
<martin.blumenstingl at googlemail.com> wrote:
> On Tue, Jun 2, 2015 at 1:54 AM, Aleksander Wałęski <olewales at gmail.com> wrote:
>> Extraction procedure is exactly the same as for regular TD-W9980.
> Thanks, I have it that this afternoon.
>
>> I was expecting only Annex difference, but this firmware
>> may be specifically tweaked for Germany ("# for DT/Germany market" in
>> vdsl.scr). I guess ADSL over ISDN is not very popular elsewhere.
> Yes, Germany is a bit special regarding this...
>
>
>> On Mon, Jun 1, 2015 at 11:32 PM, Martin Blumenstingl
>> <martin.blumenstingl at googlemail.com> wrote:
>>> I can test it this weekend on an Annex B ADSL connection. So I will
>>> test with firmware 1e472dad0eda88281af7c00cd3f49fcc29d4fa83 or
>>> 186b5406e6511c97d997b48f5e0ec5ad3f62600d (see [1]).
> I was able to test those two today: both are working fine on my ADSL2+
> Annex B connection - I did not notice any difference between them.
>
> I have also updated my patch once again: [0].
> It does not spam my dmesg, device is still responsive. However, I
> cannot say anything regarding stability yet. Let's wait a few days...
>
>
> Regards,
> Martin
>
>
> [0] https://gist.github.com/xdarklight/2986587133d97892a4b3
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel