[OpenWrt-Devel] [PATCH 1/1] ramips: Add support for RT5350F-OLinuXino

John Crispin blogic at openwrt.org
Wed Jun 3 09:42:27 EDT 2015


Hi,

there are lots of places where the tabs were replaced with spaces. maybe
your mail client chewed the mail ?

the patch as such is fine though. please fix the whitespace problem and
resend

	John

On 03/06/2015 11:49, gamishev at gmail.com wrote:
> From: Dimitar Gamishev HeHoPMaJIeH <gamishev at gmail.com>
> 
>  Support for Olimex RT5350F-OLinuXino Boards, tested with RT5350F-OLinuXino and RT5350F-OLinuXino-EVB boards. More Info :
>  https://www.olimex.com/Products/OLinuXino/RT5350F/RT5350F-OLinuXino/open-source-hardware
> 
> Signed-off-by: Dimitar Gamishev HeHoPMaJIeH <gamishev at gmail.com>
> ---
>  target/linux/ramips/base-files/lib/ramips.sh       |   6 ++
>  .../ramips/base-files/lib/upgrade/platform.sh      |   4 +-
>  target/linux/ramips/dts/OLINUXINO-RT5350F-EVB.dts  | 101 +++++++++++++++++++++
>  target/linux/ramips/dts/OLINUXINO-RT5350F.dts      |  79 ++++++++++++++++
>  target/linux/ramips/image/Makefile                 |   8 ++
>  .../rt305x/profiles/olinuxino-rt5350f-evb.mk       |  21 +++++
>  .../ramips/rt305x/profiles/olinuxino-rt5350f.mk    |  20 ++++
>  7 files changed, 238 insertions(+), 1 deletion(-)
>  create mode 100644 target/linux/ramips/dts/OLINUXINO-RT5350F-EVB.dts
>  create mode 100644 target/linux/ramips/dts/OLINUXINO-RT5350F.dts
>  create mode 100644 target/linux/ramips/rt305x/profiles/olinuxino-rt5350f-evb.mk
>  create mode 100644 target/linux/ramips/rt305x/profiles/olinuxino-rt5350f.mk
> 
> diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
> index fd03423..ba50f1e 100755
> --- a/target/linux/ramips/base-files/lib/ramips.sh
> +++ b/target/linux/ramips/base-files/lib/ramips.sh
> @@ -334,6 +334,12 @@ ramips_board_detect() {
>  	*"Lenovo Y1S")
>  		name="y1s"
>  		;;
> +	*"OLinuXino-RT5350F")
> +                name="olinuxino-rt5350f"
> +                ;;
> +        *"OLinuXino-RT5350F-EVB")
> +                name="olinuxino-rt5350f-evb"
> +                ;;
>  	*)
>  		name="generic"
>  		;;
> diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
> index ba69a89..55ce6c9 100755
> --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
> +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
> @@ -100,7 +100,9 @@ platform_check_image() {
>  	x8 |\
>  	zbt-wa05 |\
>  	y1 |\
> -	y1s)
> +	y1s|\
> +	olinuxino-rt5350f | \
> +	olinuxino-rt5350f-evb) 
>  		[ "$magic" != "27051956" ] && {
>  			echo "Invalid image type."
>  			return 1
> diff --git a/target/linux/ramips/dts/OLINUXINO-RT5350F-EVB.dts b/target/linux/ramips/dts/OLINUXINO-RT5350F-EVB.dts
> new file mode 100644
> index 0000000..a644d4a
> --- /dev/null
> +++ b/target/linux/ramips/dts/OLINUXINO-RT5350F-EVB.dts
> @@ -0,0 +1,101 @@
> +/dts-v1/;
> +
> +/include/ "rt5350.dtsi"
> +
> +/ {
> +        compatible = "RT5350F-OLINUXINO", "ralink,rt5350-soc";
> +        model = "RT5350F-OLINUXINO";
> +
> +        palmbus at 10000000 {
> +                spi at b00 {
> +                        status = "okay";
> +                        m25p80 at 0 {
> +                                #address-cells = <1>;
> +                                #size-cells = <1>;
> +                                compatible = "s25fl064k";
> +                                reg = <0 0>;
> +                                linux,modalias = "m25p80", "s25fl064k";
> +                                spi-max-frequency = <10000000>;
> +
> +                                partition at 0 {
> +                                        label = "u-boot";
> +                                        reg = <0x0 0x30000>;
> +                                        read-only;
> +                                };
> +
> +                                partition at 30000 {
> +                                        label = "u-boot-env";
> +                                        reg = <0x30000 0x10000>;
> +                                        read-only;
> +                                };
> +
> +                                factory: partition at 40000 {
> +                                        label = "factory";
> +                                        reg = <0x40000 0x10000>;
> +                                        read-only;
> +                                };
> +
> +                                partition at 50000 {
> +                                        label = "firmware";
> +                                        reg = <0x50000 0x3b0000>;
> +                                };
> +                        };
> +                };
> +                gpio1: gpio at 660 {
> +                        status = "okay";
> +                };
> +        };
> +
> +        pinctrl {
> +                state_default: pinctrl0 {
> +                        gpio {
> +                                ralink,group = "jtag", "rgmii", "mdio", "uartf";
> +                                ralink,function = "gpio";
> +                        };
> +                };
> +        };
> +
> +        ethernet at 10100000 {
> +                mtd-mac-address = <&factory 0x4>;
> +        };
> +
> +        esw at 10110000 {
> +                ralink,portmap = <0x2f>;
> +                ralink,led_polarity = <0x17>;
> +        };
> +
> +        wmac at 10180000 {
> +                ralink,mtd-eeprom = <&factory 0>;
> +        };
> +
> +        ehci at 101c0000 {
> +                status = "okay";
> +        };
> +
> +        ohci at 101c1000 {
> +                status = "okay";
> +        };
> +
> +        gpio_export {
> +                compatible = "gpio-export";
> +                #size-cells = <0>;
> +
> +                relay1 {
> +                        gpio-export,name = "gpio12";
> +                        gpio-export,output = <0>;
> +                        gpios = <&gpio0 12 0>;
> +                };
> +
> +                relay2 {
> +                        gpio-export,name = "gpio14";
> +                        gpio-export,output = <0>;
> +                        gpios = <&gpio0 14 0>;
> +                };
> +
> +                button {
> +                        gpio-export,name = "button";
> +                        gpios = <&gpio0 0 1>;
> +                };
> +
> +        };
> +};
> diff --git a/target/linux/ramips/dts/OLINUXINO-RT5350F.dts b/target/linux/ramips/dts/OLINUXINO-RT5350F.dts
> new file mode 100644
> index 0000000..984e701
> --- /dev/null
> +++ b/target/linux/ramips/dts/OLINUXINO-RT5350F.dts
> @@ -0,0 +1,79 @@
> +/dts-v1/;
> +
> +/include/ "rt5350.dtsi"
> +
> +/ {
> +        compatible = "RT5350F-OLINUXINO", "ralink,rt5350-soc";
> +        model = "RT5350F-OLINUXINO";
> +
> +        palmbus at 10000000 {
> +                spi at b00 {
> +                        status = "okay";
> +                        m25p80 at 0 {
> +                                #address-cells = <1>;
> +                                #size-cells = <1>;
> +                                compatible = "s25fl064k";
> +                                reg = <0 0>;
> +                                linux,modalias = "m25p80", "s25fl064k";
> +                                spi-max-frequency = <10000000>;
> +
> +                                partition at 0 {
> +                                        label = "u-boot";
> +                                        reg = <0x0 0x30000>;
> +                                        read-only;
> +                                };
> +
> +                                partition at 30000 {
> +                                        label = "u-boot-env";
> +                                        reg = <0x30000 0x10000>;
> +                                        read-only;
> +                                };
> +
> +                                factory: partition at 40000 {
> +                                        label = "factory";
> +                                        reg = <0x40000 0x10000>;
> +                                        read-only;
> +                                };
> +
> +                                partition at 50000 {
> +                                        label = "firmware";
> +                                        reg = <0x50000 0x3b0000>;
> +                                };
> +                        };
> +                };
> +                gpio1: gpio at 660 {
> +                        status = "okay";
> +                };
> +        };
> +
> +        pinctrl {
> +                state_default: pinctrl0 {
> +                        gpio {
> +                                ralink,group = "jtag", "rgmii", "mdio", "uartf";
> +                                ralink,function = "gpio";
> +                        };
> +                };
> +        };
> +
> +        ethernet at 10100000 {
> +                mtd-mac-address = <&factory 0x4>;
> +        };
> +
> +        esw at 10110000 {
> +                ralink,portmap = <0x2f>;
> +                ralink,led_polarity = <0x17>;
> +        };
> +
> +        wmac at 10180000 {
> +                ralink,mtd-eeprom = <&factory 0>;
> +        };
> +
> +        ehci at 101c0000 {
> +                status = "okay";
> +        };
> +
> +        ohci at 101c1000 {
> +                status = "okay";
> +        };
> +
> +};
> diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
> index 86200ab..4f128da 100644
> --- a/target/linux/ramips/image/Makefile
> +++ b/target/linux/ramips/image/Makefile
> @@ -486,6 +486,11 @@ Image/Build/Profile/W502U=$(call BuildFirmware/Default8M/$(1),$(1),w502u,W502U)
>  
>  Image/Build/Profile/WCR150GN=$(call BuildFirmware/Default4M/$(1),$(1),wcr150gn,WCR150GN)
>  
> +Image/Build/Profile/OLINUXINO-RT5350F=$(call BuildFirmware/Default8M/$(1),$(1),olinuxino-rt5350f,OLINUXINO-RT5350F)
> +
> +Image/Build/Profile/OLINUXINO-RT5350F-EVB=$(call BuildFirmware/Default8M/$(1),$(1),olinuxino-rt5350f-evb,OLINUXINO-RT5350F-EVB)
> +
> +
>  buffalo_whrg300n_mtd_size=3801088
>  define BuildFirmware/WHRG300N/squashfs
>  	$(call BuildFirmware/Default4M/$(1),$(1),whr-g300n,WHR-G300N)
> @@ -635,6 +640,9 @@ define Image/Build/Profile/Default
>  	$(call Image/Build/Profile/X5,$(1))
>  	$(call Image/Build/Profile/X8,$(1))
>  	$(call Image/Build/Profile/XDXRN502J,$(1))
> +	$(call Image/Build/Profile/OLINUXINO-RT5350F,$(1))
> +        $(call Image/Build/Profile/OLINUXINO-RT5350F-EVB,$(1))
> +
>  endef
>  endif
>  
> diff --git a/target/linux/ramips/rt305x/profiles/olinuxino-rt5350f-evb.mk b/target/linux/ramips/rt305x/profiles/olinuxino-rt5350f-evb.mk
> new file mode 100644
> index 0000000..cc158ba
> --- /dev/null
> +++ b/target/linux/ramips/rt305x/profiles/olinuxino-rt5350f-evb.mk
> @@ -0,0 +1,21 @@
> +#
> +# Copyright (C) 2014 OpenWrt.org
> +#
> +# This is free software, licensed under the GNU General Public License v2.
> +# See /LICENSE for more information.
> +#
> +
> +define Profile/OLINUXINO-RT5350F-EVB
> +        NAME:=OLinuXino-RT5350F-EVB
> +        PACKAGES:=\
> +                kmod-usb-core kmod-usb-ohci kmod-usb2 \
> +                kmod-i2c-core kmod-i2c-ralink \
> +                kmod-spi-dev
> +endef
> +
> +define Profile/OLINUXINO-RT5350F/Description
> +        Package set for OLinuXino-RT5350F-EVB board
> +endef
> +
> +$(eval $(call Profile,OLINUXINO-RT5350F-EVB))
> +
> diff --git a/target/linux/ramips/rt305x/profiles/olinuxino-rt5350f.mk b/target/linux/ramips/rt305x/profiles/olinuxino-rt5350f.mk
> new file mode 100644
> index 0000000..fe018ef
> --- /dev/null
> +++ b/target/linux/ramips/rt305x/profiles/olinuxino-rt5350f.mk
> @@ -0,0 +1,20 @@
> +#
> +# Copyright (C) 2014 OpenWrt.org
> +#
> +# This is free software, licensed under the GNU General Public License v2.
> +# See /LICENSE for more information.
> +#
> +
> +define Profile/OLINUXINO-RT5350F
> +        NAME:=OLinuXino-RT5350F
> +        PACKAGES:=\
> +                kmod-usb-core kmod-usb-ohci kmod-usb2 \
> +                kmod-i2c-core kmod-i2c-ralink \
> +                kmod-spi-dev
> +endef
> +
> +define Profile/OLINUXINO-RT5350F/Description
> +        Package set for OLinuXino-RT5350F board
> +endef
> +
> +$(eval $(call Profile,OLINUXINO-RT5350F))
> 
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel



More information about the openwrt-devel mailing list