[OpenWrt-Devel] [PATCH 0/3] Add support for Thomson TG582n DANT-1 board

[Kejia Hu (Terry)]

From: Kejia Hu <kejia.hu at codethink.co.uk>

This set of patches added support for Thomson TG582n DANT-1 board.

They have been tested by building a CFE image, and loaded to the board using
a customised CFE.

support for DANT-T board may be possible with these patches with limited modification,
but I can't test this due to lack of hardware.

Kejia Hu (3):
  Add support for EON EN25Q128 flash chip.
  Add support for TG582n DANT-1 board.
  Add TG582N option in profile section of menuconfig

 target/linux/brcm63xx/base-files/lib/brcm63xx.sh   |  3 +
 target/linux/brcm63xx/dts/tg582n.dts               | 81 ++++++++++++++++++++++
 target/linux/brcm63xx/image/Makefile               |  2 +
 .../brcm63xx/patches-3.18/571-board_TG582N.patch   | 70 +++++++++++++++++++
 target/linux/brcm63xx/profiles/thomson.mk          |  9 +++
 ...-spi-nor-add-support-for-the-EON-EN25Q128.patch | 12 ++++
 6 files changed, 177 insertions(+)
 create mode 100644 target/linux/brcm63xx/dts/tg582n.dts
 create mode 100644 target/linux/brcm63xx/patches-3.18/571-board_TG582N.patch
 create mode 100644 target/linux/brcm63xx/profiles/thomson.mk
 create mode 100644 target/linux/generic/patches-3.18/475-mtd-spi-nor-add-support-for-the-EON-EN25Q128.patch

-- 
2.1.4
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel