[OpenWrt-Devel] [PATCH 1/3] Add support for EON EN25Q128 flash chip.

[Kejia Hu (Terry)]

From: Kejia Hu <kejia.hu at codethink.co.uk>

This is part of the work to add support for Thomson TG582n router.

There are 2 variants for the board, namely DANT-T and DANT-1, EN25Q128 is used on
DANT-1 only.
---
 .../475-mtd-spi-nor-add-support-for-the-EON-EN25Q128.patch   | 12 ++++++++++++
 1 file changed, 12 insertions(+)
 create mode 100644 target/linux/generic/patches-3.18/475-mtd-spi-nor-add-support-for-the-EON-EN25Q128.patch

diff --git a/target/linux/generic/patches-3.18/475-mtd-spi-nor-add-support-for-the-EON-EN25Q128.patch b/target/linux/generic/patches-3.18/475-mtd-spi-nor-add-support-for-the-EON-EN25Q128.patch
new file mode 100644
index 0000000..7bb550d
--- /dev/null
+++ b/target/linux/generic/patches-3.18/475-mtd-spi-nor-add-support-for-the-EON-EN25Q128.patch
@@ -0,0 +1,12 @@
+diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
+index c51ee52..09a1a12 100644
+--- a/drivers/mtd/spi-nor/spi-nor.c
++++ b/drivers/mtd/spi-nor/spi-nor.c
+@@ -497,6 +497,7 @@ static const struct spi_device_id spi_nor_ids[] = {
+ 	{ "en25q32b",   INFO(0x1c3016, 0, 64 * 1024,   64, 0) },
+ 	{ "en25p64",    INFO(0x1c2017, 0, 64 * 1024,  128, 0) },
+ 	{ "en25q64",    INFO(0x1c3017, 0, 64 * 1024,  128, SECT_4K) },
++	{ "en25q128",   INFO(0x1c3018, 0, 64 * 1024,  256, 0) },
+ 	{ "en25qh128",  INFO(0x1c7018, 0, 64 * 1024,  256, 0) },
+ 	{ "en25qh256",  INFO(0x1c7019, 0, 64 * 1024,  512, 0) },
+ 
-- 
2.1.4
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel