[OpenWrt-Devel] beacon_int not working in Chaos Calmer in adhoc
Ben West
ben at gowasabi.net
Sat Jun 27 01:11:44 EDT 2015
I've been trying out CC on an adhoc mesh of three UBNT M5 radios, and I've
been unable to specify the beacon interval in /etc/config/wireless.
Here is the /etc/config/wireless I'm using:
config wifi-device radio0
option type mac80211
option channel 36
option hwmode 11a
option path 'pci0000:00/0000:00:00.0'
option htmode HT20
option country 'US'
option beacon_int '500'
list basic_rate '12000 18000 24000 36000 48000 54000'
option diversity '1'
option doth '0'
option disabled 0
config wifi-iface wlan0
option device radio0
option network 'mesh'
option mode 'adhoc'
option mcast_rate '12000'
option ssid MyMesh
option bssid '02:CA:FF:EE:BA:BE'
option encryption 'psk2+aes'
option key '...'
Under Chaos Calmer v46069 using packages hostapd, hostapd-common, and
wpa-supplicant, this is the /tmp/run/wpa_supplicant-wlan0.conf generated:
ap_scan=2
network={
scan_ssid=0
ssid="MyMesh"
key_mgmt=WPA-PSK
mode=1
fixed_freq=1
frequency=5180
mode=1
psk="..."
proto=RSN
bssid=02:CA:FF:EE:BA:BE
mcast_rate=12
htmode=HT20
}
By comparison, the same radios and same wireless config file, flashed with
Barrier Breaker r45620, have this /var/run/wpa_supplicant-wlan0.conf
generated:
ap_scan=2
network={
scan_ssid=0
ssid="MyMesh"
key_mgmt=WPA-PSK
mode=1
fixed_freq=1
frequency=5180
mode=1
psk="..."
proto=RSN
bssid=02:CA:FF:EE:BA:BE
beacon_int=500
mcast_rate=12
}
--
Ben West
http://gowasabi.net
ben at gowasabi.net
314-246-9434
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20150627/52fa2248/attachment.htm>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list