[OpenWrt-Devel] [PATCH] [generic] ramips: adding support for OYE-0001 Wireless Router
younfan33
younfan33 at hotmail.com
Tue Jun 30 02:37:42 EDT 2015
From: Tom Deng <2579131212 at qq.com>
Adding support for OYE-0001 Wireless Router.
OYE-0001 is a wireless router made by oyewifi.com. Below is the details:
MT7620A, 128MB DDR2, 16MB FLASH, SD Slot, USB 2.0, 4 x LAN + 1 x WAN.
Signed-off-by: Tom Deng <2579131212 at qq.com>
---
Index: target/linux/ramips/base-files/etc/diag.sh
===================================================================
--- target/linux/ramips/base-files/etc/diag.sh (revision 43797)
+++ target/linux/ramips/base-files/etc/diag.sh (working copy)
@@ -185,6 +185,9 @@
f7c027)
status_led="belkin:orange:status"
;;
+ oye-0001)
+ status_led="oye:green:wifi"
+ ;;
na930)
status_led="na930:blue:power"
;;
Index: target/linux/ramips/base-files/etc/uci-defaults/01_leds
===================================================================
--- target/linux/ramips/base-files/etc/uci-defaults/01_leds (revision 43797)
+++ target/linux/ramips/base-files/etc/uci-defaults/01_leds (working copy)
@@ -198,6 +198,10 @@
set_wifi_led "zbtlink:blue:air"
set_usb_led "zbtlink:blue:usb"
;;
+ oye-0001)
+ ucidef_set_led_default "power" "power" "oye:green:power" "1"
+ set_wifi_led "oye:green:wifi"
+ ;;
wr8305rt)
ucidef_set_led_default "power" "power" "wr8305rt:sys" "1"
set_usb_led "wr8305rt:usb"
Index: target/linux/ramips/base-files/etc/uci-defaults/02_network
===================================================================
--- target/linux/ramips/base-files/etc/uci-defaults/02_network (revision 43797)
+++ target/linux/ramips/base-files/etc/uci-defaults/02_network (working copy)
@@ -103,6 +103,7 @@
dir-615-h1 | \
hlk-rm04 | \
mzk-w300nh2 | \
+ oye-0001 | \
mzk-750dhp)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
@@ -220,6 +221,11 @@
wan_mac=$(mtd_get_mac_binary devdata 7)
;;
+ oye-0001)
+ lan_mac=$(mtd_get_mac_binary factory 40)
+ wan_mac=$(mtd_get_mac_binary factory 46)
+ ;;
+
w306r-v20)
lan_mac=$(cat /sys/class/net/eth0/address)
wan_mac=$(macaddr_add "$lan_mac" 5)
Index: target/linux/ramips/base-files/lib/ramips.sh
===================================================================
--- target/linux/ramips/base-files/lib/ramips.sh (revision 43797)
+++ target/linux/ramips/base-files/lib/ramips.sh (working copy)
@@ -322,6 +322,9 @@
*"Zbtlink ZBT-WA05")
name="zbt-wa05"
;;
+ *"OYE-0001")
+ name="oye-0001"
+ ;;
*"ZBT WR8305RT")
name="wr8305rt"
;;
Index: target/linux/ramips/base-files/lib/upgrade/platform.sh
===================================================================
--- target/linux/ramips/base-files/lib/upgrade/platform.sh (revision 43797)
+++ target/linux/ramips/base-files/lib/upgrade/platform.sh (working copy)
@@ -95,6 +95,7 @@
wmr300 |\
wr8305rt |\
wrtnode |\
+ oye-0001 |\
x5 |\
x8 |\
zbt-wa05 |\
Index: target/linux/ramips/dts/OYE-0001.dts
===================================================================
--- target/linux/ramips/dts/OYE-0001.dts (revision 0)
+++ target/linux/ramips/dts/OYE-0001.dts (revision 0)
@@ -0,0 +1,123 @@
+/dts-v1/;
+
+/include/ "mt7620a.dtsi"
+
+/ {
+ compatible = "ralink,mt7620a-soc";
+ model = "OYE-0001";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ palmbus at 10000000 {
+ gpio2: gpio at 660 {
+ status = "okay";
+ };
+
+ gpio3: gpio at 688 {
+ status = "okay";
+ };
+
+ spi at b00 {
+ status = "okay";
+
+ m25p80 at 0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "w25q128";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "w25q128";
+ spi-max-frequency = <10000000>;
+
+ partition at 0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition at 30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition at 40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition at 50000 {
+ label = "firmware";
+ reg = <0x50000 0xfb0000>;
+ };
+
+ };
+ };
+ };
+
+ pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd";
+ ralink,function = "gpio";
+ };
+ };
+ };
+
+ ethernet at 10100000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ephy_pins>;
+
+ ralink,port-map = "llllw";
+ };
+
+ gsw at 10110000 {
+ ralink,port4 = "ephy";
+ };
+
+ wmac at 10180000 {
+ ralink,mtd-eeprom = <&factory 0>;
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ powerled {
+ label = "oye:green:power";
+ gpios = <&gpio0 9 1>;
+ };
+ wifiled {
+ label = "oye:green:wifi";
+ gpios = <&gpio3 0 1>;
+ };
+ };
+
+ sdhci at 10130000 {
+ status = "okay";
+ };
+
+ ehci at 101c0000 {
+ status = "okay";
+ };
+
+ ohci at 101c1000 {
+ status = "okay";
+ };
+
+ pcie at 10140000 {
+ status = "okay";
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+ s1 {
+ label = "reset";
+ gpios = <&gpio0 1 1>;
+ linux,code = <0x198>;
+ };
+ };
+};
Index: target/linux/ramips/image/Makefile
===================================================================
--- target/linux/ramips/image/Makefile (revision 43797)
+++ target/linux/ramips/image/Makefile (working copy)
@@ -724,6 +724,7 @@
na930_mtd_size=20971520
Image/Build/Profile/NA930=$(call BuildFirmware/CustomFlash/$(1),$(1),na930,NA930,$(na930_mtd_size))
Image/Build/Profile/MZK-750DHP=$(call BuildFirmware/Default8M/$(1),$(1),mzk-750dhp,MZK-750DHP)
+Image/Build/Profile/OYE-0001=$(call BuildFirmware/Default16M/$(1),$(1),oye-0001,OYE-0001)
Image/Build/Profile/Y1=$(call BuildFirmware/Default16M/$(1),$(1),Lenovo-y1,Y1)
Image/Build/Profile/Y1S=$(call BuildFirmware/Default16M/$(1),$(1),Lenovo-y1s,Y1S)
@@ -740,6 +741,7 @@
$(call Image/Build/Profile/WHR1166D,$(1))
$(call Image/Build/Profile/MZK-750DHP,$(1))
$(call Image/Build/Profile/NA930,$(1))
+ $(call Image/Build/Profile/OYE-0001,$(1))
$(call Image/Build/Profile/Y1,$(1))
$(call Image/Build/Profile/Y1S,$(1))
endef
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list