[OpenWrt-Devel] [PATCH 2/2] mac80211: Drop ath10k workaround for providing calibration data

[Matti Laakso]

Ath10k has now a proper method of providing calibration data via
the kernel firmware API. This patch can be dropped as all boards
now use the proper method.

Signed-off-by: Matti Laakso <malaakso at elisanet.fi>
---
 ...w_fallback_to_board_bin_on_empty_otp_stream.patch | 20 --------------------
 1 file changed, 20 deletions(-)
 delete mode 100644 package/kernel/mac80211/patches/920-ath10k_allow_fallback_to_board_bin_on_empty_otp_stream.patch

diff --git a/package/kernel/mac80211/patches/920-ath10k_allow_fallback_to_board_bin_on_empty_otp_stream.patch b/package/kernel/mac80211/patches/920-ath10k_allow_fallback_to_board_bin_on_empty_otp_stream.patch
deleted file mode 100644
index 4c04d4f..0000000
--- a/package/kernel/mac80211/patches/920-ath10k_allow_fallback_to_board_bin_on_empty_otp_stream.patch
+++ /dev/null
@@ -1,20 +0,0 @@
---- a/drivers/net/wireless/ath/ath10k/core.c
-+++ b/drivers/net/wireless/ath/ath10k/core.c
-@@ -387,9 +387,14 @@ static int ath10k_download_and_run_otp(s
- 
- 	ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot otp execute result %d\n", result);
- 
--	if (!skip_otp && result != 0) {
--		ath10k_err(ar, "otp calibration failed: %d", result);
--		return -EINVAL;
-+	if (!skip_otp) {
-+		if (result == 2) {
-+			ath10k_warn(ar, "otp stream is empty, using board.bin contents");
-+			return 0;
-+		} else if (result != 0) {
-+			ath10k_err(ar, "otp calibration failed: %d", result);
-+			return -EINVAL;
-+		}
- 	}
- 
- 	return 0;
-- 
2.1.4
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel