[OpenWrt-Devel] Chaos Calmer 15.05-rc2

[Fernando Frediani]

Hi folks,

I'm seeing an issue on my Barrier Breaker running on a TP-Link WR842ND 
where it gets an IPv6 /128 to the WAN interface + /64 on the LAN 
interface via DHCPv6 + PD, however it does NOT set the default gateway 
by default, so I have to discover it and set manually using the 
other-side link-local.
Even though eventually while running and after a few "Save & Apply" it 
"mysteriously" looses the same default gateway I have set manually (I'm 
guessing due DHCPv6 changing it every in a while to the original when it 
booted - none). And it can't ping it anymore (the other-side link local 
address). By the way, it's a cable connection.

For comparison I have another router running DD-WRT from 22/Nov/2014 
connected to the same ISP in another point of the city and it works fine 
DHCPv6, sets the default gateway by default and never looses it.

By any chance this changelog "/Fixed broken IPv6 downstream DHCPv6-PD 
and onlink-route handling/" would perhaps have anything to do with that 
problem observed ?

Thanks
Fernando


On 13/06/2015 11:21, Steven Barth wrote:
> The OpenWrt developers are proud to announce the first release candidate
> of OpenWrt Chaos Calmer.
>
>     _______                     ________        __
>   |       |.-----.-----.-----.|  |  |  |.----.|  |_
>   |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
>   |_______||   __|_____|__|__||________||__|  |____|
>            |__| W I R E L E S S   F R E E D O M
>   -----------------------------------------------------
>   CHAOS CALMER (15.05 RC2)
>   -----------------------------------------------------
>    * 1 1/2 oz Gin            Shake with a glassful
>    * 1/4 oz Triple Sec       of broken ice and pour
>    * 3/4 oz Lime Juice       unstrained into a goblet.
>    * 1 1/2 oz Orange Juice
>    * 1 tsp. Grenadine Syrup
>   -----------------------------------------------------
>
>   -----------------------------------------------------
> http://downloads.openwrt.org/chaos_calmer/15.05-rc2/
>
> ** Improvements since RC 1 **
> * Fixed broken ImageBuilders for most targets
> * Updated 3.18 to 3.18.14
> * Fixed broken IPv6 downstream DHCPv6-PD and onlink-route handling
> * Images (special format) for Asus brcm47xx and bcm53xx devices
> * Improved stability of sysupgrade on brcm47xx and bcm53xx
> * Added HTTPS enforcement option to uhttpd
> * Fixed umask issue
> * Added support for a few new boards
>
>
> ** Highlights since Barrier Breaker **
>
> * Linux kernel updated to version 3.18
> * Improved Security Features
>      - Rewritten package signing architecture based on ed25519
>      - Added support for jails
>      - Added support for hardened builds
> * Improved Networking Support
>      - Added or improved support for lots of 3G/4G modems (MBIM, QMI,
> NCM, ...)
>      - Added support for 464XLAT (CLAT) [RFC 6877 + RFC 7050]
>      - Netfilter performance enhancements (conntrack route cache)
>      - Improved support for self-managing networks [draft-ietf-homenet-hncp]
>      - Better multi-core support for the network stack
>      - Improved support for MAP-E, MAP-T and LW4over6 IPv4 transitioning
> technologies
>          [draft-ietf-softwire-map, -map-t, -map-dhcp, -lw4over6]
>      - Improved network auto-setup capable of detecting and bootstrapping
> IPv4-only,
>        6rd, Dual-Stack, IPv6-only, DS-Lite, LW4over6, MAP-E, MAP-T, 464XLAT
>        and combinations without explicit configuration [based on RFC 7084]
>      - Added support for Smart Queue Management (SQM) QoS, AQM and
> Traffic Shaping
>      - Improved support for DNSSEC
> * Platform and Driver Support
>      - Added support for feeds of externally maintained targets
>      - New mt7621 subtarget for Mediatek 11ac SoC
>      - New mt76 mac80211 based wifi driver for MTK 11ac cores.
>      - New mwlwifi mac80211 based wifi driver for the Marvell 88W8864
>      - New bcm53xx target for Broadcom ARM BCM47xx/53xx devices
>      - New mxs target for Freescale i.MX23/28 family and various boards
>      - New sunxi target for AllWinner A10/A13/A20 family and various boards
>      - brcm2708: support for Raspberry Pi 2
>      - brcm63xx: support for BCM6318 and BCM63268 family
>      - brcm63xx: improved fallback sprom support with bcma support
>
> * Known Issues
>      - Sysupgrade on brcm47xx may fail by running out of memory when
> using .bin or .chk files. Please use .trx when using rc1 (it was fixed
> in rc2).
>       - openssl and strongswan are outdated. If you intend to use either
> of them please update the packages using the snapshots repository:
> https://downloads.openwrt.org/snapshots/trunk/
>
>
> And lots and lots of other advancements...
> As always a big thank you goes to all our active package maintainers,
> testers, supporters and documenters.
>
>
> Have fun!
>      The OpenWrt developer team
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20150613/5f5b0030/attachment.htm>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel