July 2015 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Wed Jul 1 02:29:18 EDT 2015
Ending: Fri Jul 31 15:50:59 EDT 2015
Messages: 854

• [OpenWrt-Devel] [PATCH V5] linux:generic: mtd backport for Spansion S25FL164K   L. D. Pinney
• [OpenWrt-Devel] [PATCH 1/2] lantiq: Add support for Arcadyan ARV8539PW22 (Speedport W 504V)   Jannis Pinter
• [OpenWrt-Devel] [PATCH 2/2] uboot-lantiq: Add support for Arcadyan ARV8539PW22 (Speedport W 504V)   Jannis Pinter
• [OpenWrt-Devel] Huawei 3372 NCM support on CC not working   chrono
• [OpenWrt-Devel] For RG100A-AA, How to modify the default value of /etc/config/network?   zhengfish
• [OpenWrt-Devel] For RG100A-AA, How to modify the default value of /etc/config/network?   Jannis Pinter
• [OpenWrt-Devel] For RG100A-AA, How to modify the default value of /etc/config/network?   N.Leiten
• [OpenWrt-Devel] Huawei 3372 NCM support on CC not working   Bjørn Mork
• [OpenWrt-Devel] [PATCH] ar71xx: fix kernel Oops in at803x_link_change_notify   Christian Lamparter
• [OpenWrt-Devel] Huawei 3372 NCM support on CC not working   chrono
• [OpenWrt-Devel] gpio-ralink, no interrupt GPIO pin?   Baptiste Clenet
• [OpenWrt-Devel] config for WNDR3800   Maciej Soltysiak
• [OpenWrt-Devel] config for WNDR3800   Lars
• [OpenWrt-Devel] config for WNDR3800   Jonathan Bennett
• [OpenWrt-Devel] config for WNDR3800   Maciej Soltysiak
• [OpenWrt-Devel] config for WNDR3800   Maciej Soltysiak
• [OpenWrt-Devel] Dualradio 2.4/5GHz ath9k-Hardware which is deliverable?   Jonathan Bennett
• [OpenWrt-Devel] Dualradio 2.4/5GHz ath9k-Hardware which is deliverable?   Bastian Bittorf
• [OpenWrt-Devel] Huawei 3372 NCM support on CC not working   Bjørn Mork
• [OpenWrt-Devel] Dualradio 2.4/5GHz ath9k-Hardware which is deliverable?   Bastian Bittorf
• [OpenWrt-Devel] Dualradio 2.4/5GHz ath9k-Hardware which is deliverable?   Emmanuel Deloget
• [OpenWrt-Devel] Dualradio 2.4/5GHz ath9k-Hardware which is deliverable?   Bastian Bittorf
• [OpenWrt-Devel] Huawei 3372 NCM support on CC not working   Matti Laakso
• [OpenWrt-Devel] Dualradio 2.4/5GHz ath9k-Hardware which is deliverable?   Etienne Champetier
• [OpenWrt-Devel] Dualradio 2.4/5GHz ath9k-Hardware which is deliverable?   Jos Vos
• [OpenWrt-Devel] Huawei 3372 NCM support on CC not working   Vittorio G (VittGam)
• [OpenWrt-Devel] Huawei 3372 NCM support on CC not working   Cezary Jackiewicz
• [OpenWrt-Devel] [PATCH 1/2] ar71xx: rework patch for qca953x/956x   miaoqing at qti.qualcomm.com
• [OpenWrt-Devel] [PATCH 2/2] ar71xx: add support for ap143   miaoqing at qti.qualcomm.com
• [OpenWrt-Devel] alternative for "pyserial+python-mini"   valent.turkovic at gmail.com
• [OpenWrt-Devel] [PATCH 1/2] ar71xx: rework patch for qca953x/956x   Roman Yeryomin
• [OpenWrt-Devel] Dualradio 2.4/5GHz ath9k-Hardware which is deliverable?   Bastian Bittorf
• [OpenWrt-Devel] alternative for "pyserial+python-mini"   Alexandru Ardelean
• [OpenWrt-Devel] [PATCH 1/2] ar71xx: rework patch for qca953x/956x   Pan, Miaoqing
• [OpenWrt-Devel] [PATCH 1/2] ar71xx: rework patch for qca953x/956x   Roman Yeryomin
• [OpenWrt-Devel] ramips and mips16   Cristian Morales Vega
• [OpenWrt-Devel] [Olsr-dev] [ANNOUNCE - v1] olsrd v0.9.0.2 released   Bastian Bittorf
• [OpenWrt-Devel] [PATCH v2 0/8] ar71xx: support for devolo dLAN devices   Günther Kelleter
• [OpenWrt-Devel] [PATCH v2 1/8] ar71xx: ag71xx: add pdata field supported   Günther Kelleter
• [OpenWrt-Devel] [PATCH v2 2/8] ath79: dev-eth: initialize clock for id 0 on AR934X   Günther Kelleter
• [OpenWrt-Devel] [PATCH v2 3/8] ar71xx: add support for the devolo dLAN pro 500 Wireless+   Günther Kelleter
• [OpenWrt-Devel] [PATCH v2 4/8] ar71xx: add support to use gpio irqs   Günther Kelleter
• [OpenWrt-Devel] [PATCH v2 5/8] mac80211: make more ath10k firmwares selectable   Günther Kelleter
• [OpenWrt-Devel] [PATCH v2 6/8] generic: replace request_irq by request_threaded_irq to fix non working ledtrig-gpio   Günther Kelleter
• [OpenWrt-Devel] [PATCH v2 7/8] base-files: added option to configure the gpio led trigger in uci-defaults   Günther Kelleter
• [OpenWrt-Devel] [PATCH v2 8/8] ar71xx: add support for the devolo dLAN pro 1200+ WiFi ac   Günther Kelleter
• [OpenWrt-Devel] [PATCH V2 procd] service: start apps with LD_PRELOAD & lib for line buffering   Rafał Miłecki
• [OpenWrt-Devel] error 421 while creating new ticket   Bastian Bittorf
• [OpenWrt-Devel] [PATCH 1/2] ar71xx: rework patch for qca953x/956x   Matthias Schiffer
• [OpenWrt-Devel] [PATCH] hostapd netifd wmm configuration for speedup wifi.   Felix Fietkau
• [OpenWrt-Devel] asking for help about mt7620 restarting   ldy647
• [OpenWrt-Devel] asking for help about mt7620 restarting   ldy647
• [OpenWrt-Devel] help   ldy647
• [OpenWrt-Devel] help   nam228
• [OpenWrt-Devel] [PATCH 1/2] ar71xx: rework patch for qca953x/956x   Pan, Miaoqing
• [OpenWrt-Devel] asking for help about mt7620 restarting   Pan, Miaoqing
• [OpenWrt-Devel] [PATCH] [generic] ramips: adding support for OY-0001 Wireless Router   LiWeijian
• [OpenWrt-Devel] [PATCH] [generic] ramips: adding support for OY-0001 Wireless Router   Yousong Zhou
• [OpenWrt-Devel] [PATCH] ar71xx: fix kernel Oops in at803x_link_change_notify   Sven Eckelmann
• [OpenWrt-Devel] watchping   Bruno Randolf
• [OpenWrt-Devel] watchping   Bastian Bittorf
• [OpenWrt-Devel] watchping   Bastian Bittorf
• [OpenWrt-Devel] watchping   Florian Eckert
• [OpenWrt-Devel] 14.07 SDK - iostream.h not found   Jo-Philipp Wich
• [OpenWrt-Devel] [PATCH] ar71xx: fix UAP-PRO images   Roman Yeryomin
• [OpenWrt-Devel] watchping   Juliusz Chroboczek
• [OpenWrt-Devel] [PATCH] linux-3.18: prevent redefinition of struct ethhdr   Jonas Gorski
• [OpenWrt-Devel] [PATCH] Fixes regarding bridge multicast-to-unicast feature   Linus Lüssing
• [OpenWrt-Devel] [PATCH 1/2] ar71xx: rework patch for qca953x/956x   Christian Mehlis
• [OpenWrt-Devel] [FIX] Please Patch: Wpa2-EAP RADIUS No accounting server configured fix   Matt .
• [OpenWrt-Devel] [PATCH] ar71xx: fix UAP-PRO images   Alexander Couzens
• [OpenWrt-Devel] [PATCH] ar71xx: fix UAP-PRO images   Roman Yeryomin
• [OpenWrt-Devel] [PATCH] ar71xx: fix UAP-PRO images   Matt .
• [OpenWrt-Devel] IPtables/NAT   John kerry
• [OpenWrt-Devel] IPtables/NAT   Florian Fainelli
• [OpenWrt-Devel] IPtables/NAT   Alpha Sparc
• [OpenWrt-Devel] TEXTREL in x86 with musl   Luiz Angelo Daros de Luca
• [OpenWrt-Devel] [PATCH] ramips: adding support for OY-0001 Wireless Router   LiWeijian
• [OpenWrt-Devel] [PATCH] ar71xx: fix UAP-PRO images   Roman Yeryomin
• [OpenWrt-Devel] Huawei 3372 NCM support on CC not working   chrono
• [OpenWrt-Devel] VoCore as wireless bridge   Yaroslav Syrytsia
• [OpenWrt-Devel] [PATCH] ar71xx: fix UAP-PRO images   Matt .
• [OpenWrt-Devel] [PATCH] ar71xx: fix UAP-PRO images   Roman Yeryomin
• [OpenWrt-Devel] [PATCH] ar71xx: fix UAP-PRO images   Matt .
• [OpenWrt-Devel] [PATCH v2 5/8] mac80211: make more ath10k firmwares selectable   Felix Fietkau
• [OpenWrt-Devel] [PATCH v2 5/8] mac80211: make more ath10k firmwares selectable   Martin Blumenstingl
• [OpenWrt-Devel] [PATCH v2 5/8] mac80211: make more ath10k firmwares selectable   Felix Fietkau
• [OpenWrt-Devel] [PATCH v2 6/8] generic: replace request_irq by request_threaded_irq to fix non working ledtrig-gpio   Felix Fietkau
• [OpenWrt-Devel] [PATCH v2 5/8] mac80211: make more ath10k firmwares selectable   Martin Blumenstingl
• [OpenWrt-Devel] [PATCH v2 5/8] mac80211: make more ath10k firmwares selectable   Felix Fietkau
• [OpenWrt-Devel] [PATCH v2 5/8] mac80211: make more ath10k firmwares selectable   Guenther Kelleter
• [OpenWrt-Devel] [PATCH] ar71xx: fix kernel Oops in at803x_link_change_notify   Christian Lamparter
• [OpenWrt-Devel] [PATCH v2 6/8] generic: replace request_irq by request_threaded_irq to fix non working ledtrig-gpio   Guenther Kelleter
• [OpenWrt-Devel] [PATCH v2 6/8] generic: replace request_irq by request_threaded_irq to fix non working ledtrig-gpio   Felix Fietkau
• [OpenWrt-Devel] [PATCH 1/2] ar71xx: rework patch for qca953x/956x   Matthias Schiffer
• [OpenWrt-Devel] [PATCH v2 5/8] mac80211: make more ath10k firmwares selectable   Guenther Kelleter
• [OpenWrt-Devel] [PATCH v2 5/8] mac80211: make more ath10k firmwares selectable   Felix Fietkau
• [OpenWrt-Devel] [PATCH] ar71xx: add LED defaults for the EnGenius EPG5000   Christian Beier
• [OpenWrt-Devel] [PATCH 1/2] ar71xx: rework patch for qca953x/956x   Christian Mehlis
• [OpenWrt-Devel] [PATCH 1/2] dnsmasq: enable extra tracing by default when UCI parameter logqueries is set   Hans Dedecker
• [OpenWrt-Devel] [PATCH 2/2] dnsmasq: Add sequential_ip UCI parameter   Hans Dedecker
• [OpenWrt-Devel] watchping   Bruno Randolf
• [OpenWrt-Devel] [PATCH] mac80211: update regulatory database to master-2015-06-05   Petko Bordjukov
• [OpenWrt-Devel] [PATCH] ramips mt7620: ArcherC20i USB support and more   Gunnar Thorburn
• [OpenWrt-Devel] watchping   Saverio Proto
• [OpenWrt-Devel] [PATCH] ramips mt7620: ArcherC20i USB support and more   Jonas Gorski
• [OpenWrt-Devel] [PATCH] Deal with allocation errors in a few missing places.   Felix Fietkau
• [OpenWrt-Devel] [PATCH] Deal gracefully with allocation failures in a few omitted places.   Felix Fietkau
• [OpenWrt-Devel] [PATCH 1/2] Provide meaningful error messages when fork fails.   Felix Fietkau
• [OpenWrt-Devel] [PATCH V3] service: if logging start app with LD_PRELOAD & lib for line buffering   Rafał Miłecki
• [OpenWrt-Devel] [PATCH] ramips mt7620: ArcherC20i USB support and more   Gunnar Thorburn
• [OpenWrt-Devel] [PATCH 1/2] mvsw61xx: use unique forwarding database per VLAN   Claudio Leite
• [OpenWrt-Devel] [PATCH 2/2] mvebu: undo LA bit on WRT1900ACv1 WAN MAC address   Claudio Leite
• [OpenWrt-Devel] [PATCH v2 0/3] QCA953x fixes, AP143 support   Matthias Schiffer
• [OpenWrt-Devel] [PATCH v2 1/3] ar71xx: fix ethernet initialization on QCA953x-based boards (TP-Link TL-WR841N/ND v9, Compex WPJ531)   Matthias Schiffer
• [OpenWrt-Devel] [PATCH v2 2/3] ar71xx: rework patch for qca953x/956x   Matthias Schiffer
• [OpenWrt-Devel] [PATCH v2 3/3] ar71xx: add support for ap143   Matthias Schiffer
• [OpenWrt-Devel] Change Default Configuration   John kerry
• [OpenWrt-Devel] ZTE MF823 Au - umbim troubles   Gareth Lowe
• [OpenWrt-Devel] [PATCH 1/2] dnsmasq: enable extra tracing by default when UCI parameter logqueries is set   Steven Barth
• [OpenWrt-Devel] [PATCH V3] service: if logging start app with LD_PRELOAD & lib for line buffering   Steven Barth
• [OpenWrt-Devel] Huawei 3372 NCM support on CC not working   chrono
• [OpenWrt-Devel] [PATCH] ramips mt7620: ArcherC20i USB support and more   Jonas Gorski
• [OpenWrt-Devel] [PATCH v2 6/8] generic: replace request_irq by request_threaded_irq to fix non working ledtrig-gpio   Guenther Kelleter
• [OpenWrt-Devel] [PATCH V2 procd] hotplug: support for interval commands   Rafał Miłecki
• [OpenWrt-Devel] [PATCH] implemented basic GPIO control   John Crispin
• [OpenWrt-Devel] [PATCH] ramips: fix typo in WHR1166D mtd size variable   Lorenzo Bianconi
• [OpenWrt-Devel] [PATCH] ramips: adding support for OY-0001 Wireless Router   John Crispin
• [OpenWrt-Devel] Patch to enable RFKill and USB Power GPIO for tl-wdr4900v1   John Crispin
• [OpenWrt-Devel] Add for Planex MZK-DP150N   John Crispin
• [OpenWrt-Devel] please backport to 15-05: "scripts/feeds: observe -p flag for preferential feeds"   Karl Palsson
• [OpenWrt-Devel] [PATCH] ar71xx: Add support for The QCA AP147-010 reference board   John Crispin
• [OpenWrt-Devel] [PATCH] ar71xx: add support for D-Link DIR-615 rev. Ix board   John Crispin
• [OpenWrt-Devel] [PATCH v2] ncm: add support to run via proto wwan   John Crispin
• [OpenWrt-Devel] [PATCH] [RESUBMIT] Support Linksys WAP-4410N   John Crispin
• [OpenWrt-Devel] [PATCH] busybox: replace hotfix with upstream commit de5edadee2dca2896492f97ab3a56e389305e74d   John Crispin
• [OpenWrt-Devel] [PATCH v3 0/7] ar71xx: Add support for devolo dLAN devices   Günther Kelleter
• [OpenWrt-Devel] [PATCH v3 1/7] ar71xx: ag71xx: add pdata field supported   Günther Kelleter
• [OpenWrt-Devel] [PATCH v3 2/7] ath79: dev-eth: initialize clock for id 0 on AR934X   Günther Kelleter
• [OpenWrt-Devel] [PATCH v3 3/7] ar71xx: add support for the devolo dLAN pro 500 Wireless+   Günther Kelleter
• [OpenWrt-Devel] [PATCH v3 4/7] ar71xx: add support to use gpio irqs   Günther Kelleter
• [OpenWrt-Devel] [PATCH v3 5/7] mac80211: make ath10k firmware v2 selectable   Günther Kelleter
• [OpenWrt-Devel] [PATCH v3 6/7] base-files: added option to configure the gpio led trigger in uci-defaults   Günther Kelleter
• [OpenWrt-Devel] [PATCH v3 7/7] ar71xx: add support for the devolo dLAN pro 1200+ WiFi ac   Günther Kelleter
• [OpenWrt-Devel] [PATCH] ar71xx: add support for D-Link DIR-615 rev. Ix board   Jaehoon You
• [OpenWrt-Devel] [PATCH][v2] ar71xx: add support for D-Link DIR-615 rev. Ix board   Jaehoon You
• [OpenWrt-Devel] [PATCH][v2] ar71xx: add support for D-Link DIR-615 rev. Ix board   John Crispin
• [OpenWrt-Devel] ramips: add support for Planex MZK-DP150N   ＠SRCHACK.ORG
• [OpenWrt-Devel] [OpenWrt-Hackers] 15.05-rc3   John Crispin
• [OpenWrt-Devel] [OpenWrt-Hackers] 15.05-rc3   John Crispin
• [OpenWrt-Devel] [PATCH] Enable RFKill and USB Power GPIO for tl-wdr4900v1   Alpha Sparc
• [OpenWrt-Devel] [PATCH] Enable RFKill and USB Power GPIO for tl-wdr4900v1   John Crispin
• [OpenWrt-Devel] [PATCH] [PATCH v3] ar71xx: Add support for Cisco-Linksys WAP4410N   Ryan A Young
• [OpenWrt-Devel] [PATCH] fstools: fstab.init fix spelling   Kevin Darbyshire-Bryant
• [OpenWrt-Devel] Progress on patch - scripts/feeds: print the source of packages installed   Kevin Darbyshire-Bryant
• [OpenWrt-Devel] [PATCH v2] ncm: add support to run via proto wwan   Aleksandr Kolesnik
• [OpenWrt-Devel] [PATCH v3] ncm: add support to run via proto wwan   Aleksandr Kolesnik
• [OpenWrt-Devel] [PATCH v3] ramips: add support for Planex MZK-DP150N   ＠SRCHACK.ORG
• [OpenWrt-Devel] Change Default Configuration   Lars Kruse
• [OpenWrt-Devel] [PATCH] base-files: implemented basic GPIO control   Lars Kruse
• [OpenWrt-Devel] Hardening Issues / Revert r46146 ?   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH] fix 64bit uclibc external toolchain detection   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH] toolchain/uClibc: add uclibc-ng 1.0.3   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH] malta: add harddisk support   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH] swconfig: swlib.c: Fix another memleak   Alexandru Ardelean
• [OpenWrt-Devel] [PATCH] swconfig: Split libsw out of swconfig for reuse in other packages   Alexandru Ardelean
• [OpenWrt-Devel] [PATCH] swconfig: swlib.c: Fix another memleak   Rafał Miłecki
• [OpenWrt-Devel] [PATCH] swconfig: Split libsw out of swconfig for reuse in other packages   Rafał Miłecki
• [OpenWrt-Devel] [PATCH] [RESEND] swconfig: swlib.c: Fix another memleak   Alexandru Ardelean
• [OpenWrt-Devel] [PATCH] [RFC] [RESEND] swconfig: Split libsw out of swconfig for reuse in other packages   Alexandru Ardelean
• [OpenWrt-Devel] [PATCH] swconfig: Split libsw out of swconfig for reuse in other packages   Alexandru Ardelean
• [OpenWrt-Devel] [PATCH] swconfig: Split libsw out of swconfig for reuse in other packages   Cristian Morales Vega
• [OpenWrt-Devel] Hardening Issues / Revert r46146 ?   Steven Barth
• [OpenWrt-Devel] [PATCH] malta: add harddisk support   Yousong Zhou
• [OpenWrt-Devel] [PATCH] ar71xx: Allow to use ath79_gpio_output_select on QCA955x   Felix Fietkau
• [OpenWrt-Devel] [PATCH] toolchain/uClibc: add uclibc-ng 1.0.3   Steven Barth
• [OpenWrt-Devel] Hardening Issues / Revert r46146 ?   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH v3] ncm: add support to run via proto wwan   Aleksandr Kolesnik
• [OpenWrt-Devel] Rebooting boards with > 16M SPI flash (was: Re: help)   Paul Fertser
• [OpenWrt-Devel] [PATCH] Add dts patch to enable RFKill and USB Power GPIO Control   gwlim
• [OpenWrt-Devel] [PATCH] [RESEND] swconfig: swlib.c: Fix another memleak   Felix Fietkau
• [OpenWrt-Devel] [PATCH] Add dts patch to enable RFKill and USB Power GPIO Control   Rafał Miłecki
• [OpenWrt-Devel] [PATCH] Add dts patch to enable RFKill and USB Power GPIO Control   Rafał Miłecki
• [OpenWrt-Devel] [PATCH openwrt 1/3] hostapd: Always isolate if brport->multicast_to_unicast is enabled   Felix Fietkau
• [OpenWrt-Devel] [PATCH v2 6/8] generic: replace request_irq by request_threaded_irq to fix non working ledtrig-gpio   Felix Fietkau
• [OpenWrt-Devel] [PATCH v2 6/8] generic: replace request_irq by request_threaded_irq to fix non working ledtrig-gpio   Guenther Kelleter
• [OpenWrt-Devel] [PATCH] [RESEND] swconfig: swlib.c: Fix another memleak   Helmut Schaa
• [OpenWrt-Devel] [PATCH] [RFC] [RESEND] swconfig: Split libsw out of swconfig for reuse in other packages   Helmut Schaa
• [OpenWrt-Devel] [PATCH] Enable RFKill and USB Power GPIO Control for WDR4900v1   gwlim
• [OpenWrt-Devel] [PATCH][v2] ar71xx: add support for D-Link DIR-615 rev. Ix board   Karl Palsson
• [OpenWrt-Devel] [PATCH] ar71xx: Fix LED-to-phy mapping for EnGenius ESR1750.   Christian Beier
• [OpenWrt-Devel] [PATCH] Enable RFKill and USB Power GPIO Control for WDR4900v1   Rafał Miłecki
• [OpenWrt-Devel] AES module vs builtin   Cristian Morales Vega
• [PATCH] malta: add harddisk support   blogic
• [PATCH] malta: add harddisk support   blogic
• [OpenWrt-Devel] [PATCH] ar71xx: ag71xx remove IRQF_DISABLED   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH] mpc85xx: Enable RFKill and USB Power GPIO Control for WDR4900v1   gwlim
• [OpenWrt-Devel] [PATCH] mpc85xx: Enable RFKill and USB Power GPIO Control for WDR4900v1   Rafał Miłecki
• [OpenWrt-Devel] [PATCH 1/5] ar71xx: compex wpj531 fix ethernet registration   Christian Mehlis
• [OpenWrt-Devel] [PATCH 2/5] ar71xx: compex wpj531 fix setting mac address on ethernet   Christian Mehlis
• [OpenWrt-Devel] [PATCH 3/5] ar71xx: compex wpj531 remove unnecessary switch initialization   Christian Mehlis
• [OpenWrt-Devel] [PATCH 4/5] ar71xx: compex wpj531 register usb support   Christian Mehlis
• [OpenWrt-Devel] [PATCH 5/5] ar71xx: compex wpe72 add space to include statement   Christian Mehlis
• [OpenWrt-Devel] AES module vs builtin   Dirk Neukirchen
• [OpenWrt-Devel] Raspberry Pi 2 sysupgrade   Bruno Randolf
• [OpenWrt-Devel] [PATCH] ramips mt7620: ArcherC20i USB support and more   Gunnar Thorburn
• [OpenWrt-Devel] [PATCH 1/4] gemini: copy kernel image to BIN_DIR   Roman Yeryomin
• [OpenWrt-Devel] [PATCH 2/4] gemini: add NAS packages to Raidsonic profile   Roman Yeryomin
• [OpenWrt-Devel] [PATCH 3/4] gemini: add 4.1 support   Roman Yeryomin
• [OpenWrt-Devel] [PATCH 4/4] gemini: switch to 4.1   Roman Yeryomin
• [OpenWrt-Devel] [PATCH] x86/xen_domu: enable image generation   Luiz Angelo Daros de Luca
• [OpenWrt-Devel] [OpenWrt] [LUCI] ar71xx: GUI changes   John kerry
• [OpenWrt-Devel] [PATCH 1/4] gemini: copy kernel image to BIN_DIR   John Crispin
• [OpenWrt-Devel] [PATCH] x86/xen_domu: enable image generation   John Crispin
• [OpenWrt-Devel] [PATCH 2/4] gemini: add NAS packages to Raidsonic profile   John Crispin
• [OpenWrt-Devel] Raspberry Pi 2 sysupgrade   John Crispin
• [OpenWrt-Devel] [PATCH] ramips mt7620: ArcherC20i USB support and more   John Crispin
• [OpenWrt-Devel] [PATCH] [ar71xx] Add support for Onion Omega   Boken Lin
• [OpenWrt-Devel] [PATCH] [ar71xx] Add support for Onion Omega   John Crispin
• [OpenWrt-Devel] Rebooting boards with > 16M SPI flash (was: Re: help)   John Crispin
• [OpenWrt-Devel] [PATCH 3/5] ar71xx: compex wpj531 remove unnecessary switch initialization   John Crispin
• [OpenWrt-Devel] [PATCH v3 1/7] ar71xx: ag71xx: add pdata field supported   John Crispin
• [OpenWrt-Devel] [PATCH v3 2/7] ath79: dev-eth: initialize clock for id 0 on AR934X   John Crispin
• [OpenWrt-Devel] [PATCH v3 4/7] ar71xx: add support to use gpio irqs   John Crispin
• [OpenWrt-Devel] [PATCH v3 5/7] mac80211: make ath10k firmware v2 selectable   John Crispin
• [OpenWrt-Devel] [PATCH v3 6/7] base-files: added option to configure the gpio led trigger in uci-defaults   John Crispin
• [OpenWrt-Devel] [PATCH v3 7/7] ar71xx: add support for the devolo dLAN pro 1200+ WiFi ac   John Crispin
• [OpenWrt-Devel] Rebooting boards with > 16M SPI flash   Paul Fertser
• [OpenWrt-Devel] [PATCH 3/5] ar71xx: compex wpj531 remove unnecessary switch initialization   Christian Mehlis
• [OpenWrt-Devel] Rebooting boards with > 16M SPI flash   Arjen de Korte
• [OpenWrt-Devel] [PATCH v3 1/7] ar71xx: ag71xx: add pdata field supported   Guenther Kelleter
• [OpenWrt-Devel] [PATCH v3 1/7] ar71xx: ag71xx: add pdata field supported   John Crispin
• [OpenWrt-Devel] Does anyone have used Ralink i2s under openwrt?   Sergio
• [OpenWrt-Devel] Does anyone have used Ralink i2s under openwrt?   John Crispin
• [OpenWrt-Devel] Rebooting boards with > 16M SPI flash   Paul Fertser
• [OpenWrt-Devel] Rebooting boards with > 16M SPI flash   Arjen de Korte
• [OpenWrt-Devel] Rebooting boards with > 16M SPI flash (was: Re: help)   Jonas Gorski
• [OpenWrt-Devel] [PATCH v3 2/7] ath79: dev-eth: initialize clock for id 0 on AR934X   Guenther Kelleter
• [OpenWrt-Devel] 6LoWPAN with OpenWRT   Firas
• [OpenWrt-Devel] Does anyone have used Ralink i2s under openwrt?   Sergio
• [OpenWrt-Devel] [PATCH 1/4] gemini: copy kernel image to BIN_DIR   Roman Yeryomin
• [OpenWrt-Devel] [PATCH 2/4] gemini: add NAS packages to Raidsonic profile   Roman Yeryomin
• [OpenWrt-Devel] How to get higher version (>2.0) of radvd package   Pratik Prajapati
• [OpenWrt-Devel] [PATCH v3 1/7] ar71xx: ag71xx: add pdata field supported   Guenther Kelleter
• [OpenWrt-Devel] [PATCH V3] cdc_ncm: Add support for moving NDP to end of NCM frame   chrono
• [OpenWrt-Devel] [PATCH v3 7/7] ar71xx: add support for the devolo dLAN pro 1200+ WiFi ac   Guenther Kelleter
• [OpenWrt-Devel] [PATCH v3 5/7] mac80211: make ath10k firmware v2 selectable   Guenther Kelleter
• [OpenWrt-Devel] [PATCH] [ar71xx] Add support for Onion Omega   Karl Palsson
• [OpenWrt-Devel] How to add 6LoWPAN to OpenWRT   Firas
• [OpenWrt-Devel] [PATCH v4 0/5] ar71xx: Add support for devolo dLAN devices   Günther Kelleter
• [OpenWrt-Devel] [PATCH v4 1/5] ar71xx: add support for the devolo dLAN pro 500 Wireless+   Günther Kelleter
• [OpenWrt-Devel] [PATCH v4 2/5] ar71xx: add support to use gpio irqs   Günther Kelleter
• [OpenWrt-Devel] [PATCH v4 3/5] mac80211: make ath10k firmware v2 selectable   Günther Kelleter
• [OpenWrt-Devel] [PATCH v4 4/5] base-files: added option to configure the gpio led trigger in uci-defaults   Günther Kelleter
• [OpenWrt-Devel] [PATCH v4 5/5] ar71xx: add support for the devolo dLAN pro 1200+ WiFi ac   Günther Kelleter
• [OpenWrt-Devel] [PATCH] [ar71xx] Add support for Onion Omega   Karl Palsson
• [OpenWrt-Devel] How to add 6LoWPAN to OpenWRT   Hauke Mehrtens
• [OpenWrt-Devel] How to get higher version (>2.0) of radvd package   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH] ramips: mt7620 ArcherC20i USB support   Gunnar Thorburn
• [OpenWrt-Devel] [PATCH] ebtables: fix miscompilation on 64bit targets   Matthias Schiffer
• [OpenWrt-Devel] How to add 6LoWPAN to OpenWRT   Firas
• [OpenWrt-Devel] Archer C7 CC 15.05-rc1 Ath9K phy1: Failed to stop TX DMA, queues=0x002!   camden lindsay
• [OpenWrt-Devel] Archer C7 CC 15.05-rc1 Ath9K phy1: Failed to stop TX DMA, queues=0x002!   camden lindsay
• [OpenWrt-Devel] IPTables/NAT   John kerry
• [OpenWrt-Devel] 6LoWPAN with OpenWRT   Varka Bhadram
• [OpenWrt-Devel] [PATCH] ramips: adding support for OY-0001 Wireless Router   LiWeijian
• [OpenWrt-Devel] [PATCH 1/3] ar71xx: add GPIO based S/W I2C master   miaoqing at qti.qualcomm.com
• [OpenWrt-Devel] [PATCH 2/3] ar71xx: add support for the Giga Device spi nand chips   miaoqing at qti.qualcomm.com
• [OpenWrt-Devel] [PATCH 3/3] ar71xx: add spi nand driver support   miaoqing at qti.qualcomm.com
• [OpenWrt-Devel] [PATCH][libubox] ustream-fd: handle uloop errors   Philip Craig
• [OpenWrt-Devel] [PATCH 2/3] ar71xx: add support for the Giga Device spi nand chips   John Crispin
• [OpenWrt-Devel] [PATCH 3/3] ar71xx: add spi nand driver support   John Crispin
• [OpenWrt-Devel] How to activate Device Tree on the Raspberry Pi and add a device?   Michael Neurohr
• [OpenWrt-Devel] 6LoWPAN with OpenWRT   Firas
• [OpenWrt-Devel] [PATCH 3/3] ar71xx: add spi nand driver support   Jonas Gorski
• [OpenWrt-Devel] [PATCH 3/3] ar71xx: add spi nand driver support   Pan, Miaoqing
• [OpenWrt-Devel] firstboot aka jffs2reset - can this brick the bootloader?   Christian Beier
• [OpenWrt-Devel] [PATCH][libubox] ustream-fd: handle uloop errors   Felix Fietkau
• [OpenWrt-Devel] [PATCH] ramips: adding support for OY-0001 Wireless Router   Karl Palsson
• [OpenWrt-Devel] [PATCH] ramips: adding support for OY-0001 Wireless Router   John Crispin
• [OpenWrt-Devel] [PATCH] ramips: adding support for OY-0001 Wireless Router   LiWeijian
• [OpenWrt-Devel] Presentation on Linux Containers (LXC)   Eric Schultz
• [OpenWrt-Devel] [PATCH] ramips: adding support for OY-0001 Wireless Router   Karl Palsson
• [OpenWrt-Devel] Raspberry Pi 2 sysupgrade   Bruno Randolf
• [OpenWrt-Devel] lantiq DSL drivers / firmware info   Aleksander Wałęski
• [OpenWrt-Devel] Raspberry Pi 2 sysupgrade   Matthias Schiffer
• [OpenWrt-Devel] [PATCH] ramips: adding support for OY-0001 Wireless Router   John Crispin
• [OpenWrt-Devel] [PATCH] ramips: adding support for OY-0001 Wireless Router   John Crispin
• [OpenWrt-Devel] [PATCH 3/3] ar71xx: add spi nand driver support   Florian Fainelli
• [OpenWrt-Devel] [PATCH procd] move /dev/shm to /tmp/shm   Daniel Gimpelevich
• [OpenWrt-Devel] [PATCH] Make virtualization guests built for pentium4 with SMP   Daniel Gimpelevich
• [OpenWrt-Devel] Archer C7 CC 15.05-rc1 Ath9K phy1: Failed to stop TX DMA, queues=0x002!   Roman Yeryomin
• [OpenWrt-Devel] lantiq DSL drivers / firmware info   Sylwester Petela
• [OpenWrt-Devel] [PATCH] mac80211: ath10k Suppress 'failed to process fft' warning messages.   Kevin Darbyshire-Bryant
• [OpenWrt-Devel] Hard float ABI for BCM2708/BCM2709   Matthias Schiffer
• [OpenWrt-Devel] Hard float ABI for BCM2708/BCM2709   valent.turkovic at gmail.com
• [OpenWrt-Devel] Hard float ABI for BCM2708/BCM2709   Florian Fainelli
• [OpenWrt-Devel] Hard float ABI for BCM2708/BCM2709   Matthias Schiffer
• [OpenWrt-Devel] [PATCH] ramips: added led support for wrtnode board   Christian Mehlis
• [OpenWrt-Devel] IPTables/NAT   Lars Kruse
• [OpenWrt-Devel] [PATCH] toolchain: fix gcc 4.6 build with gcc5   Dirk Neukirchen
• [OpenWrt-Devel] Build errors when activating the Device Tree flag for Raspberry Pi   Michael Neurohr
• [OpenWrt-Devel] [PATCH 2/4] gemini: add NAS packages to Raidsonic profile   Roman Yeryomin
• [PATCH 2/2] kernel: fix build with CONFIG_MTD unset   Hauke Mehrtens
• [OpenWrt-Devel] Build errors when activating the Device Tree flag for Raspberry Pi   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH] Make virtualization guests built for pentium4 with SMP   Hauke Mehrtens
• [OpenWrt-Devel] Hyper-V Support for X86 or X86_64   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH ubox] log: allow filtering messages with a regexp pattern   Rafał Miłecki
• [OpenWrt-Devel] [PATCH V3] cdc_ncm: Add support for moving NDP to end of NCM frame   Matti Laakso
• [OpenWrt-Devel] lantiq DSL drivers / firmware info   Martin Blumenstingl
• [OpenWrt-Devel] [PATCH] Make virtualization guests built for pentium4 with SMP   Daniel Gimpelevich
• [OpenWrt-Devel] [PATCH 1/2] ipkg-build: use deterministic timestamps in ipk tarballs   Reiner Herrmann
• [OpenWrt-Devel] [PATCH 2/2] Prevent more gzip timestamps   Reiner Herrmann
• [OpenWrt-Devel] [PATCH 2/2] Prevent more gzip timestamps   Florian Fainelli
• [OpenWrt-Devel] [PATCH 1/4] brcm2708-gpu-fw: update to latest version   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 2/4] brcm2708: add DT support   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 3/4] generic: add missing symbol   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 4/4] kernel: fix build with CONFIG_MTD unset   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH openwrt 1/3] hostapd: Always isolate if brport->multicast_to_unicast is enabled   Linus Lüssing
• [OpenWrt-Devel] [PATCH][libubox] ustream-fd: handle uloop errors   Philip Craig
• [OpenWrt-Devel] [PATCH v2][libubox] ustream-fd: handle uloop errors   Philip Craig
• [OpenWrt-Devel] How to install 3rd party package in OpenWrt   Pratik Prajapati
• [OpenWrt-Devel] How to download 3rd party package from git in OpenWrt   Pratik Prajapati
• [OpenWrt-Devel] [PATCH] brcm2708: Implement sysupgrade   Bruno Randolf
• [OpenWrt-Devel] [PATCH] base-files: Add preinit option to disable config restore   Bruno Randolf
• [OpenWrt-Devel] [PATCH] firmware-utils mktplinkfw: print amount of exceeding bytes   Stephan Maka
• [OpenWrt-Devel] How to download 3rd party package from git in OpenWrt   Yousong Zhou
• [OpenWrt-Devel] [PATCH] firmware-utils mktplinkfw: print amount of exceeding bytes   Jonathan Bennett
• [OpenWrt-Devel] How to install 3rd party package in OpenWrt   Yousong Zhou
• [OpenWrt-Devel] [PATCH] firmware-utils mktplinkfw: print amount of exceeding bytes   Stephan Maka
• [OpenWrt-Devel] [PATCH] firmware-utils mktplinkfw: print amount of exceeding bytes   Jonathan Bennett
• [OpenWrt-Devel] [PATCH] firmware-utils mktplinkfw: print amount of exceeding bytes   Martin Blumenstingl
• [OpenWrt-Devel] NVRAM > 32K   Rafał Miłecki
• [OpenWrt-Devel] [PATCH v4 0/2] Support Ubiquiti Unifi Outdoor Plus HSR filter   Stefan Rompf
• [OpenWrt-Devel] Archer C7 CC 15.05-rc1 Ath9K phy1: Failed to stop TX DMA, queues=0x002!   camden lindsay
• [OpenWrt-Devel] [PATCH ubox] log: allow filtering messages with a regexp pattern   John Crispin
• [OpenWrt-Devel] How to download 3rd party package from git in OpenWrt   Pratik Prajapati
• [OpenWrt-Devel] [PATCH V3] cdc_ncm: Add support for moving NDP to end of NCM frame   John Crispin
• [OpenWrt-Devel] [PATCH V2 ubox] log: allow filtering messages with a regexp pattern   Rafał Miłecki
• [OpenWrt-Devel] How to download 3rd party package from git in OpenWrt   Yousong Zhou
• [OpenWrt-Devel] Package License   Florian Eckert
• [OpenWrt-Devel] How to download 3rd party package from git in OpenWrt   Pratik Prajapati
• [OpenWrt-Devel] Build errors when activating the Device Tree flag for Raspberry Pi   Jernej Izak
• [OpenWrt-Devel] Build errors when activating the Device Tree flag for Raspberry Pi   John Crispin
• [OpenWrt-Devel] Build issue using ccache due to GCC patch / R_MIPS_26   Karl Vogel
• [OpenWrt-Devel] [PATCH] ramips: added gpio spi refclk support for wrtnode board   Christian Mehlis
• [OpenWrt-Devel] Build issue using ccache due to GCC patch / R_MIPS_26   Felix Fietkau
• [OpenWrt-Devel] Build errors when activating the Device Tree flag for Raspberry Pi   Felix Fietkau
• [OpenWrt-Devel] Build errors when activating the Device Tree flag for Raspberry Pi   John Crispin
• [OpenWrt-Devel] Alternatives do TDMA   valent.turkovic at gmail.com
• [OpenWrt-Devel] [PATCH 2/2] Prevent more gzip timestamps   John Crispin
• [OpenWrt-Devel] [PATCH] base-files: Add preinit option to disable config restore   Felix Fietkau
• [OpenWrt-Devel] [PATCH 1/2] ipkg-build: use deterministic timestamps in ipk tarballs   John Crispin
• [OpenWrt-Devel] [PATCH] firmware-utils mktplinkfw: print amount of exceeding bytes   John Crispin
• [OpenWrt-Devel] [PATCH] Make ccache aware of OpenWRT provided GCC patch.   Karl Vogel
• [OpenWrt-Devel] [PATCH] Make ccache aware of OpenWRT provided GCC patch.   Felix Fietkau
• [OpenWrt-Devel] Alternatives do TDMA   valent.turkovic at gmail.com
• [OpenWrt-Devel] [PATCH] fix 64bit uclibc external toolchain detection   John Crispin
• [OpenWrt-Devel] IPv6/odhcpd: Attempt to workaround phones ignoring RAs in standby + to fix NDP-relays   Steven Barth
• [OpenWrt-Devel] [PATCH v4 0/5] ar71xx: Add support for devolo dLAN devices   Guenther Kelleter
• [OpenWrt-Devel] [PATCH v4 0/5] ar71xx: Add support for devolo dLAN devices   John Crispin
• [OpenWrt-Devel] Alternatives do TDMA   John Crispin
• [OpenWrt-Devel] Alternatives do TDMA   valent.turkovic at gmail.com
• [OpenWrt-Devel] [PATCH] Make ccache aware of OpenWRT provided GCC patch.   Karl Vogel
• [OpenWrt-Devel] [PATCH] Make ccache aware of OpenWRT provided GCC patch.   John Crispin
• [OpenWrt-Devel] [PATCH procd] move /dev/shm to /tmp/shm   John Crispin
• [OpenWrt-Devel] [PATCH 2/2] ar71xx: add 4.0 support   John Crispin
• [OpenWrt-Devel] [PATCH] [PATCH] x86: add kmod-acpi-button and kmod-button-hotplug to default packages   John Crispin
• [OpenWrt-Devel] [PATCH] ccache: Make ccache aware of OpenWRT provided GCC patch.   Karl Vogel
• [OpenWrt-Devel] [PATCH] ccache: Make ccache aware of OpenWRT provided GCC patch.   John Crispin
• [OpenWrt-Devel] [PATCH] Make ccache aware of OpenWRT provided GCC patch.   Felix Fietkau
• [OpenWrt-Devel] [PATCH] ccache: Make ccache aware of OpenWRT provided GCC patch.   Karl Vogel
• [OpenWrt-Devel] [PATCH] base-files: Add preinit option to disable config restore   Bruno Randolf
• [OpenWrt-Devel] VoCore as wireless bridge   Yaroslav Syrytsia
• [OpenWrt-Devel] [PATCH rebased] x86: add kmod-acpi-button and kmod-button-hotplug to default packages   Stefan Hellermann
• [OpenWrt-Devel] ping6 messages do not go through all layers in the network stack   Baptiste Clenet
• [OpenWrt-Devel] [PATCH] [brcm47xx] Belkin F7DXXXX (BCM47XX based) support for Linux 3.18   Rafał Miłecki
• [OpenWrt-Devel] Build errors when activating the Device Tree flag for Raspberry Pi   Jernej Izak
• [OpenWrt-Devel] [PATCH] [brcm47xx] Belkin F7DXXXX (BCM47XX based) support for Linux 3.18   Rafał Miłecki
• [OpenWrt-Devel] [PATCH V3] cdc_ncm: Add support for moving NDP to end of NCM frame   chrono
• [OpenWrt-Devel] Build errors when activating the Device Tree flag for Raspberry Pi   Bruno Randolf
• [OpenWrt-Devel] [PATCH V3] cdc_ncm: Add support for moving NDP to end of NCM frame   chrono
• [OpenWrt-Devel] [PATCH CC 0/5] ar71xx: backport of support for devolo dLAN devices   Günther Kelleter
• [OpenWrt-Devel] [PATCH CC 1/5] ar71xx: add support for the devolo dLAN pro 500 Wireless+   Günther Kelleter
• [OpenWrt-Devel] [PATCH CC 2/5] ar71xx: add support to use gpio irqs   Günther Kelleter
• [OpenWrt-Devel] [PATCH CC 3/5] mac80211: make ath10k firmware v2 selectable   Günther Kelleter
• [OpenWrt-Devel] [PATCH CC 4/5] base-files: added option to configure the gpio led trigger in uci-defaults   Günther Kelleter
• [OpenWrt-Devel] [PATCH CC 5/5] ar71xx: add support for the devolo dLAN pro 1200+ WiFi ac   Günther Kelleter
• [OpenWrt-Devel] Build errors when activating the Device Tree flag for Raspberry Pi   Bruno Randolf
• [OpenWrt-Devel] Build errors when activating the Device Tree flag for Raspberry Pi   John Crispin
• [OpenWrt-Devel] [PATCH CC 0/5] ar71xx: backport of support for devolo dLAN devices   Rafał Miłecki
• [OpenWrt-Devel] [PATCH CC 0/5] ar71xx: backport of support for devolo dLAN devices   John Crispin
• [OpenWrt-Devel] [PATCH v2] [netifd] Changes for more readability.   Felix Fietkau
• [OpenWrt-Devel] Build errors when activating the Device Tree flag for Raspberry Pi   Bruno Randolf
• [OpenWrt-Devel] Build errors when activating the Device Tree flag for Raspberry Pi   John Crispin
• [OpenWrt-Devel] Build errors when activating the Device Tree flag for Raspberry Pi   Bruno Randolf
• [OpenWrt-Devel] alternatives to TDMA   Bill Moffitt
• [OpenWrt-Devel] [PATCH v2] [netifd] Changes for more readability.   Yousong Zhou
• [OpenWrt-Devel] alternatives to TDMA   Martin Tippmann
• [OpenWrt-Devel] Build errors when activating the Device Tree flag for Raspberry Pi   John Crispin
• [OpenWrt-Devel] [PATCH v2] firmware-utils mktplinkfw: print amount of exceeding bytes   Stephan Maka
• [OpenWrt-Devel] [PATCH 6/6] bcm53xx: R8000 handle PEX8603 switch   Rafał Miłecki
• [OpenWrt-Devel] Alternatives do TDMA   valent.turkovic at gmail.com
• [OpenWrt-Devel] alternatives to TDMA   Fernando Frediani
• [OpenWrt-Devel] Alternatives do TDMA   Martin Tippmann
• [OpenWrt-Devel] [PATCH procd] move /dev/shm to /tmp/shm   Daniel Gimpelevich
• [OpenWrt-Devel] Alternatives do TDMA   Martin Tippmann
• [OpenWrt-Devel] [PATCH CC 0/5] ar71xx: backport of support for devolo dLAN devices   Karl Palsson
• [OpenWrt-Devel] [PATCH 1/8] brcm2708: improve profiles and image generation   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 2/8] brcm2708: remove unneeded base-files   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 3/8] brcm2708: split target config into subtargets   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 4/8] brcm2708: add linux 4.1 support   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 5/8] generic: add missing linux 4.1 symbols   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 6/8] brcm2708: improve modules   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 7/8] brcm2708: switch to linux 4.1   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 8/8] brcm2708: add Raspberry Pi Compute Module support   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 3/8] brcm2708: split target config into subtargets   Rafał Miłecki
• [OpenWrt-Devel] [PATCH 3/8] brcm2708: split target config into subtargets   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH CC 0/5] ar71xx: backport of support for devolo dLAN devices   John Crispin
• [OpenWrt-Devel] [PATCH 3/8] brcm2708: split target config into subtargets   John Crispin
• [OpenWrt-Devel] [PATCH 3/8] brcm2708: split target config into subtargets   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH] Improve wifi speed up to 2 times in AP mode.   Daniel Petre
• [OpenWrt-Devel] [PATCH V3] cdc_ncm: Add support for moving NDP to end of NCM frame   chrono
• [OpenWrt-Devel] [PATCH 1/3] kernel: add Ricoh RS5C372 RTC module support   Daniel Golle
• [OpenWrt-Devel] [PATCH 2/3] mvebu: add support for BUFFALO LS42x   Daniel Golle
• [OpenWrt-Devel] [PATCH 3/3] uboot-envtools: add support for BUFFALO LS42x   Daniel Golle
• [OpenWrt-Devel] [PATCH 2/2] Prevent more gzip timestamps   Reiner Herrmann
• [OpenWrt-Devel] [PATCH 2/2] Prevent more gzip timestamps   Florian Fainelli
• [OpenWrt-Devel] [PATCH] ar71xx: fix kernel Oops in at803x_link_change_notify   Chris Blake
• [OpenWrt-Devel] [PATCH] ar71xx: fix kernel Oops in at803x_link_change_notify   Christian Lamparter
• [OpenWrt-Devel] [PATCH] brcm63xx: HG553 buttons support   Cezary Jackiewicz
• [OpenWrt-Devel] [PATCH] Improve wifi speed up to 2 times in AP mode.   N.Leiten
• [OpenWrt-Devel] [PATCH 2/8] brcm2708: remove unneeded base-files   John Crispin
• [OpenWrt-Devel] [PATCH 2/8] brcm2708: remove unneeded base-files   John Crispin
• [OpenWrt-Devel] [PATCH 6/8] brcm2708: improve modules   John Crispin
• [OpenWrt-Devel] [PATCH 3/8] brcm2708: split target config into subtargets   John Crispin
• [OpenWrt-Devel] [PATCH] brcm63xx: HG553 buttons support   Rafał Miłecki
• [OpenWrt-Devel] [PATCH 2/8] brcm2708: remove unneeded base-files   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 6/8] brcm2708: improve modules   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH CC 0/5] ar71xx: backport of support for devolo dLAN devices   Guenther Kelleter
• [OpenWrt-Devel] [PATCH CC 0/5] ar71xx: backport of support for devolo dLAN devices   John Crispin
• [OpenWrt-Devel] [PATCH 2/8] brcm2708: remove unneeded base-files   John Crispin
• [OpenWrt-Devel] [PATCH] buildroot: improve git submodule handling for packages   Felix Fietkau
• [OpenWrt-Devel] [PATCH] CC: ar71xx: add support for D-LINK DIR-615 rev. Ix board   Jaehoon You
• [OpenWrt-Devel] [PATCH 6/6] bcm53xx: R8000 handle PEX8603 switch   Ian Kent
• [OpenWrt-Devel] [PATCH] brcm63xx: HG553 buttons support   Jonas Gorski
• [OpenWrt-Devel] [PATCH] brcm63xx: HG553 buttons support   Jonas Gorski
• [OpenWrt-Devel] [PATCH] brcm63xx: HG553 buttons support   John Crispin
• [OpenWrt-Devel] Why STA wifi interface shutsdown AP interface?   valent.turkovic at gmail.com
• [OpenWrt-Devel] Why STA wifi interface shutsdown AP interface?   Yaroslav Syrytsia
• [OpenWrt-Devel] Why STA wifi interface shutsdown AP interface?   valent.turkovic at gmail.com
• [OpenWrt-Devel] Why STA wifi interface shutsdown AP interface?   valent.turkovic at gmail.com
• [OpenWrt-Devel] Why STA wifi interface shutsdown AP interface?   Bruno Randolf
• [OpenWrt-Devel] Why STA wifi interface shutsdown AP interface?   valent.turkovic at gmail.com
• [OpenWrt-Devel] Why STA wifi interface shutsdown AP interface?   Yaroslav Syrytsia
• [OpenWrt-Devel] [PATCH] mac80211: ath10k Suppress 'failed to process fft' warning messages.   Matti Laakso
• [OpenWrt-Devel] [PATCH V3] cdc_ncm: Add support for moving NDP to end of NCM frame   chrono
• [OpenWrt-Devel] [PATCH] swconfig: libsw.so should be installed into /usr/lib/   Roman Yeryomin
• [OpenWrt-Devel] [PATCH v4] ramips: add support for Planex MZK-DP150N   YuheiOKAWA
• [OpenWrt-Devel] [PATCH V2] brcm63xx: HG553 buttons support   Cezary Jackiewicz
• [OpenWrt-Devel] [PATCH] hostapd: add RADIUS mac authentication   Cezary Jackiewicz
• [OpenWrt-Devel] [PATCH V3] cdc_ncm: Add support for moving NDP to end of NCM frame   Matti Laakso
• [OpenWrt-Devel] [PATCH] generic: cdc_ncm: Add support for moving NDP to end of NCM frame   Matti Laakso
• [OpenWrt-Devel] [PATCH V3] cdc_ncm: Add support for moving NDP to end of NCM frame   John Crispin
• [OpenWrt-Devel] [PATCH] mac80211: ath10k Suppress 'failed to process fft' warning messages.   Kevin Darbyshire-Bryant
• [OpenWrt-Devel] [PATCH V2] brcm63xx: HG553 buttons support   Rafał Miłecki
• [OpenWrt-Devel] reproducible ipk packages and building openssl with -j   Holger Levsen
• [OpenWrt-Devel] reproducible ipk packages and building openssl with -j   Holger Levsen
• [OpenWrt-Devel] libubus-lua: fix memory leak problem   陈斌
• [OpenWrt-Devel] libubox-lua: uloop.process gc bug   陈斌
• [OpenWrt-Devel] [PATCH V2] brcm63xx: HG553 buttons support   Jonas Gorski
• [OpenWrt-Devel] [PATCH] brcm63xx: HG553 buttons support   Jonas Gorski
• [OpenWrt-Devel] [PATCH] hostapd: fix #18197, no auth server (BB)   Leon Merten Lohse
• [OpenWrt-Devel] [PATCH] hostapd: fix #18197, no auth server (BB)   Felix Fietkau
• [OpenWrt-Devel] Chaos Calmer 15.05-rc3   Steven Barth
• [OpenWrt-Devel] Chaos Calmer 15.05-rc3   Steven Barth
• [OpenWrt-Devel] Chaos Calmer 15.05-rc3   Arturo Rinaldi
• [OpenWrt-Devel] Chaos Calmer 15.05-rc3   Yousong Zhou
• [OpenWrt-Devel] Chaos Calmer 15.05-rc3   ql li
• [OpenWrt-Devel] [PATCH 1/9] brcm2708: improve profiles and image generation   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 2/9] brcm2708: remove unneeded base-files   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 3/9] brcm2708: split target config into subtargets   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 4/9] brcm2708: add linux 4.1 support   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 5/9] generic: add missing linux 4.1 symbols   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 6/9] brcm2708: add upstream (bcm2835) modules and improve downstream ones (bcm2708)   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 7/9] brcm2708: override disabled device tree module status from config.txt   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 8/9] brcm2708: switch to linux 4.1   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 9/9] brcm2708: add Raspberry Pi Compute Module support   Álvaro Fernández Rojas
• [OpenWrt-Devel] router with home automation extension   Kf Lee
• [OpenWrt-Devel] router with home automation extension   chrono
• [OpenWrt-Devel] Chaos Calmer 15.05-rc3   Fernando Frediani
• [OpenWrt-Devel] Chaos Calmer 15.05-rc3   Sebastian Moeller
• [OpenWrt-Devel] Chaos Calmer 15.05-rc3   Steven Barth
• [OpenWrt-Devel] Chaos Calmer 15.05-rc3   Daniel Golle
• [OpenWrt-Devel] Chaos Calmer 15.05-rc3   John Crispin
• [OpenWrt-Devel] Chaos Calmer 15.05-rc3   Arturo Rinaldi
• [OpenWrt-Devel] Chaos Calmer 15.05-rc3   John Crispin
• [OpenWrt-Devel] Chaos Calmer 15.05 package build failures in SDK   Daniel Golle
• [OpenWrt-Devel] Chaos Calmer 15.05-rc3   Arturo Rinaldi
• [OpenWrt-Devel] Chaos Calmer 15.05 package build failures in SDK   Daniel Golle
• [OpenWrt-Devel] Chaos Calmer 15.05-rc3   Jonas Gorski
• [OpenWrt-Devel] [PATCH] hostapd: fix #18197, no auth server (BB)   Leon Merten Lohse
• [OpenWrt-Devel] [PATCH 1/2] sunxi: fix uboot install location   Matthias Schiffer
• [OpenWrt-Devel] [PATCH 2/2] sunxi: respect CONFIG_TARGET_IMAGES_GZIP   Matthias Schiffer
• [OpenWrt-Devel] [PATCH] buildroot: improve git submodule handling for packages   Darik Horn
• [OpenWrt-Devel] Missing target images in trunk snapshot   Guenther Kelleter
• [OpenWrt-Devel] [PATCH] buildroot: improve git submodule handling for packages   Gert Doering
• [OpenWrt-Devel] Missing target images in trunk snapshot   Jonas Gorski
• [OpenWrt-Devel] [PATCH] brcm63xx: switch to new image building system   Álvaro Fernández Rojas
• [OpenWrt-Devel] Chaos Calmer 15.05 package build failures in SDK   Jo-Philipp Wich
• [OpenWrt-Devel] [PATCH] brcm2708: add gzip image compression   Álvaro Fernández Rojas
• [OpenWrt-Devel] Chaos Calmer 15.05-rc3 target image for EPG5000   Christian Beier
• [OpenWrt-Devel] Export openwrt routers internal storage partitions through USB   Chetan C R
• [OpenWrt-Devel] Chaos Calmer 15.05-rc3 target image for EPG5000   John Crispin
• [OpenWrt-Devel] ath10k fails to load firmware in r46386 on ESR1750   Christian Beier
• [OpenWrt-Devel] Chaos Calmer 15.05-rc3   Karl Palsson
• [OpenWrt-Devel] [PATCH 7/9] brcm2708: override disabled device tree module status from config.txt   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH] ar71xx: use automatic firmware partition splitting for devolo dLAN devices   Günther Kelleter
• [OpenWrt-Devel] ath10k fails to load firmware in r46386 on ESR1750   Roman Yeryomin
• [OpenWrt-Devel] Chaos Calmer 15.05-rc3   Jonas Gorski
• [OpenWrt-Devel] Chaos Calmer 15.05-rc3   Ben West
• [OpenWrt-Devel] Chaos Calmer 15.05-rc3   Cristian Morales Vega
• [OpenWrt-Devel] [PATCH] brcm2708: add gzip image compression   Bruno Randolf
• [OpenWrt-Devel] [PATCH 1/2] CC: brcm2708: Add sysupgrade for Rasperry Pi   Bruno Randolf
• [OpenWrt-Devel] [PATCH 2/2] CC: brcm2708: Add gzip image compression   Bruno Randolf
• [OpenWrt-Devel] [RFC] brcm2708: enable hard float ABI   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH] ar71xx: add 4.1 support   Roman Yeryomin
• [OpenWrt-Devel] ath10k fails to load firmware in r46386 on ESR1750   Roman Yeryomin
• [OpenWrt-Devel] [RFC] brcm2708: enable hard float ABI   Matthias Schiffer
• [OpenWrt-Devel] ath10k fails to load firmware in r46386 on ESR1750   Matti Laakso
• [OpenWrt-Devel] ath10k fails to load firmware in r46386 on ESR1750   Roman Yeryomin
• [OpenWrt-Devel] [PATCH 2/2] CC: brcm2708: Add gzip image compression   Matthias Schiffer
• [OpenWrt-Devel] [PATCH 2/2] CC: brcm2708: Add gzip image compression   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH] brcm2708: add gzip image compression   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH] dnsmasq bump to dnsmasq2.74rc3   Kevin Darbyshire-Bryant
• [OpenWrt-Devel] [PATCH] ar71xx: Enable ath10k calibration data loading for EnGenius ESR1750 and EPG500.   Christian Beier
• [OpenWrt-Devel] [PATCH] mvebu: update dts files for mamba / WRT1900AC   nyt-openwrt at countercultured.net
• [OpenWrt-Devel] [PATCH] strace: cross compile fix: pass HOST_*FLAGS in to ./configure   Lawrence D'Anna
• [OpenWrt-Devel] [PATCH] mkimage: cross compile fix: pass HOST_*FLAGS in to uboot's makefile   Lawrence D'Anna
• [OpenWrt-Devel] [PATCH] dnsmasq bump to dnsmasq2.74rc3   Steven Barth
• [OpenWrt-Devel] [PATCH] dnsmasq bump to dnsmasq2.74rc3   Kevin Darbyshire-Bryant
• [OpenWrt-Devel] [PATCH] CC : ar71xx: Backport Support for the Bitmain Antminer S3   L. D. Pinney
• [OpenWrt-Devel] [PATCH] brcm63xx: switch to new image building system   Jonas Gorski
• [OpenWrt-Devel] [PATCH] mvebu: update dts files for mamba / WRT1900AC   Jonas Gorski
• [OpenWrt-Devel] [RFC] brcm2708: enable hard float ABI   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH] CC: brcm2708: Add gzip image compression   Bruno Randolf
• [OpenWrt-Devel] Chaos Calmer 15.05-rc3 target image for EPG5000   Christian Beier
• [OpenWrt-Devel] [PATCH] buildroot: improve git submodule handling for packages   Darik Horn
• [OpenWrt-Devel] RFC: Preserving smbpasswd & dnsmasq.time across sysupgrade   Kevin Darbyshire-Bryant
• [OpenWrt-Devel] [PATCH] mvebu: update dts files for mamba / WRT1900AC   nyt-openwrt at countercultured.net
• [OpenWrt-Devel] [PATCH] ar71xx: add support for Onion Omega   L. D. Pinney
• [OpenWrt-Devel] [PATCH,v2] ar71xx: add support for Onion Omega   L. D. Pinney
• [OpenWrt-Devel] [PATCH] ar71xx: add 4.1 support   Felix Fietkau
• [OpenWrt-Devel] [PATCH] bugfix: FORCE=1 doesn't work to override prereq checks   Lawrence D'Anna
• [OpenWrt-Devel] [PATCH] ar71xx: add 4.1 support   Roman Yeryomin
• [OpenWrt-Devel] [PATCH] gcc: add a darwin-compatibility patch for ansidecl.h   Lawrence D'Anna
• [OpenWrt-Devel] [PATCH procd] move /dev/shm to /tmp/shm   Daniel Gimpelevich
• [OpenWrt-Devel] [PATCH] allow HOST* variables to be set from config.   Lawrence D'Anna
• [OpenWrt-Devel] [PATCH] ar71xx: add 4.1 support   Felix Fietkau
• [OpenWrt-Devel] [PATCH,v2] ar71xx: add support for Onion Omega   Felix Fietkau
• [OpenWrt-Devel] [PATCH] allow HOST* variables to be set from config.   Felix Fietkau
• [OpenWrt-Devel] [PATCH] allow HOST* variables to be set from config.   Lawrence D'Anna
• [OpenWrt-Devel] [PATCH] allow HOST* variables to be set from config.   Felix Fietkau
• [OpenWrt-Devel] [PATCH] allow HOST* variables to be set from config.   Lawrence D'Anna
• [OpenWrt-Devel] [PATCH] allow HOST* variables to be set from config.   Felix Fietkau
• [OpenWrt-Devel] [PATCH] allow HOST* variables to be set from config.   Lawrence D'Anna
• [OpenWrt-Devel] [PATCH] CC: ar71xx: add support for Onion Omega   L. D. Pinney
• [OpenWrt-Devel] [PATCH] allow HOST* variables to be set from config.   Lawrence D'Anna
• [OpenWrt-Devel] [PATCH] allow HOST* variables to be set from config.   Lawrence D'Anna
• [OpenWrt-Devel] [PATCH] ar71xx: add 4.1 support   Roman Yeryomin
• [OpenWrt-Devel] [PATCH] ar71xx: Allow to use ath79_gpio_output_select on QCA955x   Sven Eckelmann
• [OpenWrt-Devel] [PATCH] ar71xx: Add support for The QCA AP147-010 reference board   Sven Eckelmann
• [OpenWrt-Devel] [PATCH] allow HOST* variables to be set from config.   Felix Fietkau
• [OpenWrt-Devel] [PATCH] allow HOST* variables to be set from config.   Lawrence D'Anna
• [OpenWrt-Devel] [PATCH] allow HOST* variables to be set from config.   Felix Fietkau
• [OpenWrt-Devel] [PATCHv3] ar71xx: add support for Onion Omega   L. D. Pinney
• [OpenWrt-Devel] [PATCH] ar71xx: fix kernel Oops in at803x_link_change_notify   Sven Eckelmann
• [OpenWrt-Devel] [PATCH] ar71xx: fix kernel Oops in at803x_link_change_notify   Christian Lamparter
• [OpenWrt-Devel] [PATCH] generic: add more missing linux 4.1 symbols   Daniel Golle
• [OpenWrt-Devel] [PATCH] mac80211: Clarify ath9k & ath10k debug selection   Kevin Darbyshire-Bryant
• [OpenWrt-Devel] [PATCH] bugfix: FORCE=1 doesn't work to override prereq checks   Karl Palsson
• [OpenWrt-Devel] Upgrade from CC RC2 to RC3   Maciej Soltysiak
• [OpenWrt-Devel] [PATCH v2] ar71xx: Allow to use ath79_gpio_output_select on QCA955x   Sven Eckelmann
• [OpenWrt-Devel] [PATCH v2 1/2] ar71xx: Add support for PCIe on QCA953x   Sven Eckelmann
• [OpenWrt-Devel] [PATCH v2 2/2] ar71xx: Add support for AP147-010 reference board   Sven Eckelmann
• [OpenWrt-Devel] [PATCH] bugfix: FORCE=1 doesn't work to override prereq checks   Lawrence D'Anna
• [OpenWrt-Devel] Chaos Calmer 15.05-rc3   David Lang
• [OpenWrt-Devel] [PATCH 1/3] scripts: add tool for generating redboot scripts   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 2/3] brcm63xx: use new tool for generating redboot images   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 3/3] brcm63xx: switch to new image building system   Álvaro Fernández Rojas
• [OpenWrt-Devel] nexx wt3020 broken   Daniel Petre
• [OpenWrt-Devel] Upgrade from CC RC2 to RC3   Felix Fietkau
• [OpenWrt-Devel] [PATCH procd] jail: fix jail root folder permissions   Etienne CHAMPETIER
• [OpenWrt-Devel] [PATCH 1/2] base-files: fix /tmp/.jail permissions   Etienne CHAMPETIER
• [OpenWrt-Devel] [PATCH 2/2] dnsmasq: add some missing files to the jail   Etienne CHAMPETIER
• [OpenWrt-Devel] Request before RC4/final   Bill
• [OpenWrt-Devel] Upgrade from CC RC2 to RC3   John Crispin
• [OpenWrt-Devel] Request before RC4/final   John Crispin
• [OpenWrt-Devel] nexx wt3020 broken   John Crispin
• [OpenWrt-Devel] nexx wt3020 broken   John Crispin
• [OpenWrt-Devel] [PATCH] gcc: add a darwin-compatibility patch for ansidecl.h   Lawrence D'Anna
• [OpenWrt-Devel] [PATCH CC 0/5] ar71xx: backport of support for devolo dLAN devices   Guenther Kelleter
• [OpenWrt-Devel] [PATCH 1/3] When building on darwin, add paths for Homebrew.   Lawrence D'Anna
• [OpenWrt-Devel] [PATCH 2/3] prereq-build: use HOST* variables to test host compiler   Lawrence D'Anna
• [OpenWrt-Devel] [PATCH 3/3] prereq-build: check for gnu date, dd   Lawrence D'Anna
• [OpenWrt-Devel] nexx wt3020 broken   Daniel Petre
• [OpenWrt-Devel] [PATCH] ramips: add support for STORYLiNK SAP-G3200U3   Piotr Dymacz
• [OpenWrt-Devel] Upgrade from CC RC2 to RC3   Maciej Soltysiak
• [OpenWrt-Devel] [PATCH 0/4] brcm2708: fix missing symbols issues   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 1/4] brcm2708: add kmod-video-bcm2835 support   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 2/4] kmod-regmap: enable MMIO support   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 3/4] brcm2708: add kmod-sound-soc-bcm2708-i2s support   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 4/4] generic: add missing symbol   Álvaro Fernández Rojas
• [OpenWrt-Devel] [RFC] [PATCH 0/6] CC: Backport EnGenius ESR1750 && EPG5000 fixes from trunk   Christian Beier
• [OpenWrt-Devel] [PATCH 1/6] CC: ar71xx: add kernel support for EnGenius EPG5000.   Christian Beier
• [OpenWrt-Devel] [PATCH 2/6] CC: ar71xx: add user-space support for EnGenius EPG5000.   Christian Beier
• [OpenWrt-Devel] [PATCH 3/6] CC: ar71xx: add profile and build image for EnGenius EPG5000.   Christian Beier
• [OpenWrt-Devel] [PATCH 4/6] CC: ar71xx: Fix WAN port location on EnGenius ESR1750 and EPG5000.   Christian Beier
• [OpenWrt-Devel] [PATCH 5/6] CC: ar71xx: add LED defaults for the EnGenius EPG5000   Christian Beier
• [OpenWrt-Devel] [PATCH 6/6] CC: ar71xx: Fix LED-to-phy mapping for EnGenius ESR1750.   Christian Beier
• [OpenWrt-Devel] Request for advice about SysUpgrade   drEagle
• [OpenWrt-Devel] [CC 15.05-rc3] openldap: Update   jow at openwrt.org
• [OpenWrt-Devel] [CC 15.05-rc3] freeradius2: Security update (CVE-2015-4680)   jow at openwrt.org
• [OpenWrt-Devel] [CC 14.07] freeradius2: Security update (CVE-2015-4680)   jow at openwrt.org
• [OpenWrt-Devel] [PATCH] lantiq: Fix ifxos driver on linux 4.1   Martin Blumenstingl
• [OpenWrt-Devel] [PATCH] lantiq: Silence the PCIe error interrupt printk also in 4.1   Martin Blumenstingl
• [OpenWrt-Devel] [PATCH] generic: Add missing symbols when tracing is enabled   Martin Blumenstingl
• [OpenWrt-Devel] [PATCH RFC] mac80211: Allow enabling tracing for the drivers that support it   Martin Blumenstingl
• [OpenWrt-Devel] Lantiq xrx200 - switch rtl8367rb controlled via builtin mdio (not gpio sck/sda!) in EasyBox 904xDSL   Martin Blumenstingl
• [OpenWrt-Devel] alternative for "pyserial+python-mini"   valent.turkovic at gmail.com
• [OpenWrt-Devel] Request before RC4/final - ticket 19085   Bill
• [OpenWrt-Devel] Request for advice about SysUpgrade   Claudio Leite
• [OpenWrt-Devel] [PATCH 1/2] rules.mk: export STAGING_DIR_HOST to sub-makefiles and shells   Mathieu Olivari
• [OpenWrt-Devel] [PATCH 2/2] tools/quilt: fix build error during kernel_menuconfig on a cleaned env   Mathieu Olivari
• [OpenWrt-Devel] alternative for "pyserial+python-mini"   Alexandru Ardelean
• [OpenWrt-Devel] Request for advice about SysUpgrade   drEagle
• [OpenWrt-Devel] [PATCH 2/2] tools/quilt: fix build error during kernel_menuconfig on a cleaned env   Jo-Philipp Wich
• [OpenWrt-Devel] [CC 15.05-rc3] vsftpd: Security update (CVE-2015-1419)   jow at openwrt.org
• [OpenWrt-Devel] fix for ticket #20087   Arturo Rinaldi
• [OpenWrt-Devel] jail patches -> CC & trunk   Etienne Champetier
• [OpenWrt-Devel] Can't link to ubus / ubox from C++ package   Tomer Eliyahu
• [OpenWrt-Devel] [PATCH]v2: CC: ar71xx: add support for Onion Omega   L. D. Pinney
• [OpenWrt-Devel] Change Uboot default values   Baptiste Clenet
• [OpenWrt-Devel] Can't link to ubus / ubox from C++ package   Yousong Zhou
• [OpenWrt-Devel] Change Uboot default values   Yousong Zhou
• [OpenWrt-Devel] Can't link to ubus / ubox from C++ package   Tomer Eliyahu
• [OpenWrt-Devel] Change Uboot default values   Baptiste Clenet
• [OpenWrt-Devel] [PATCH]v2: CC : ar71xx: Backport Support for the Bitmain Antminer S3   L. D. Pinney
• [OpenWrt-Devel] Change Uboot default values   Baptiste Clenet
• [OpenWrt-Devel] Adding device driver to OpenWRT (RBP)   Jernej Izak
• [OpenWrt-Devel] openwrt.org down due to expired certificate   Jonathan Bennett
• [OpenWrt-Devel] Fwd: Wanted: OpenWRT talk at NLUUG conference   Gregers Petersen
• [OpenWrt-Devel] [PATCH]v3: CC : ar71xx: Backport Support for the Bitmain Antminer S3   L. D. Pinney
• [OpenWrt-Devel] [PATCH] ar71xx: fix wndr3700_board_detect for some NETGEAR WNDR3700v2   Matthias Schiffer
• [OpenWrt-Devel] [PATCH v3 1/2] ar71xx: Add support for PCIe on QCA953x   Sven Eckelmann
• [OpenWrt-Devel] [PATCH v3 2/2] ar71xx: Add support for AP147-010 reference board   Sven Eckelmann
• [OpenWrt-Devel] ar71xx: spi difference between internal chip select and gpios as chip select   Alexander Couzens
• [OpenWrt-Devel] lantiq DSL drivers / firmware info   Andre Heider
• [OpenWrt-Devel] lantiq DSL drivers / firmware info   Martin Blumenstingl
• [OpenWrt-Devel] lantiq DSL drivers / firmware info   Alexander Couzens
• [OpenWrt-Devel] lantiq DSL drivers / firmware info   Andre Heider
• [OpenWrt-Devel] lantiq DSL drivers / firmware info   Andre Heider
• [OpenWrt-Devel] lantiq DSL drivers / firmware info   Aleksander Wałęski
• [OpenWrt-Devel] lantiq DSL drivers / firmware info   Aleksander Wałęski
• [OpenWrt-Devel] lantiq DSL drivers / firmware info   Martin Blumenstingl
• [OpenWrt-Devel] OpenWrt Summit RFP - Deadline August 21   Eric Schultz
• [OpenWrt-Devel] [PATCH V3] cdc_ncm: Add support for moving NDP to end of NCM frame   John Crispin
• [OpenWrt-Devel] [PATCH] bugfix: FORCE=1 doesn't work to override prereq checks   John Crispin
• [OpenWrt-Devel] [PATCH 1/2] CC: brcm2708: Add sysupgrade for Rasperry Pi   John Crispin
• [OpenWrt-Devel] [PATCH 1/2] sunxi: fix uboot install location   John Crispin
• [OpenWrt-Devel] [PATCH]v2: CC: ar71xx: add support for Onion Omega   John Crispin
• [OpenWrt-Devel] [PATCH] CC: ar71xx: add support for D-LINK DIR-615 rev. Ix board   John Crispin
• [OpenWrt-Devel] [PATCH V3] cdc_ncm: Add support for moving NDP to end of NCM frame   Matti Laakso
• [OpenWrt-Devel] [PATCH V3] cdc_ncm: Add support for moving NDP to end of NCM frame   John Crispin
• [OpenWrt-Devel] [PATCH 1/2] CC: brcm2708: Add sysupgrade for Rasperry Pi   Bruno Randolf
• [OpenWrt-Devel] [PATCH 1/2] CC: brcm2708: Add sysupgrade for Rasperry Pi   John Crispin
• [OpenWrt-Devel] GUI user name and pass   John kerry
• [OpenWrt-Devel] GUI user name and pass   John Crispin
• [OpenWrt-Devel] [PATCH V3] cdc_ncm: Add support for moving NDP to end of NCM frame   Matti Laakso
• [OpenWrt-Devel] Not able to get ipv6 address on OpenWrt ported embedded target   Pratik Prajapati
• [OpenWrt-Devel] Not able to get ipv6 address on OpenWrt ported embedded target   Steven Barth
• [OpenWrt-Devel] Not able to get ipv6 address on OpenWrt ported embedded target   Pratik Prajapati
• [OpenWrt-Devel] Not able to get ipv6 address on OpenWrt ported embedded target   Steven Barth
• [OpenWrt-Devel] Syntax error in radvd.conf   Pratik Prajapati
• [OpenWrt-Devel] Not able to get ipv6 address on OpenWrt ported embedded target   Pratik Prajapati
• [OpenWrt-Devel] [PATCH]v3: CC: ar71xx: Backport support for Onion Omega   L. D. Pinney
• [OpenWrt-Devel] GUI user name and pass   Joshua Judson Rosen
• [OpenWrt-Devel] [PATCH 0/2] Try to fix mcs814x dLAN USB Extender   Günther Kelleter
• [OpenWrt-Devel] [PATCH 1/2] mcs814x: Fix debug UART and timer irq   Günther Kelleter
• [OpenWrt-Devel] [PATCH 2/2] mcs814x: use firmware partition splitter on dLAN USB Extender   Günther Kelleter
• [OpenWrt-Devel] [PATCH 1/2] sunxi: fix uboot install location   Matthias Schiffer
• [OpenWrt-Devel] Syntax error in radvd.conf   Luiz Angelo Daros de Luca
• [OpenWrt-Devel] [PATCH] Workaround: saved administration site user and pass may appear on the Wireless configuration page, replacing the WPA key   George Valkov
• [OpenWrt-Devel] [PATCH] Allow editing of AP channel when all client networks are disabled   George Valkov
• [OpenWrt-Devel] [PATCH] Fix: Status for disabled wireless networks may display the SSID, BSSID and Mode of an active network on the same radio   George Valkov
• [OpenWrt-Devel] [PATCH] Fix: A disabled wireless network may be shown as enabled, when multiple networks are defined on the same radio   George Valkov
• [OpenWrt-Devel] [PATCH] mac80211: set mcast-rate for mesh point interfaces   Nils Schneider
• [OpenWrt-Devel] [PATCHv2] mac80211: set mcast-rate for mesh point interfaces   Nils Schneider
• [OpenWrt-Devel] [PATCH] get rid of misleading FORCE=1 message   Lawrence D'Anna
• [OpenWrt-Devel] [PATCH]v4: CC: ar71xx: Backport support for Onion Omega   L. D. Pinney
• [OpenWrt-Devel] Split kernel modules out of the base opkg repo?   Matthias Schiffer
• [OpenWrt-Devel] [PATCH] [brcm63xx] Add support for Plusnet 2704N   Jonas Gorski
• [OpenWrt-Devel] Split kernel modules out of the base opkg repo?   John Crispin
• [OpenWrt-Devel] [PATCH][RESEND] CC: ar71xx: add support for D-LINK DIR-615 rev. Ix board   Jaehoon You
• [OpenWrt-Devel] [PATCH 1/6] CC: ar71xx: add kernel support for EnGenius EPG5000.   John Crispin
• [OpenWrt-Devel] [PATCH 1/6] CC: ar71xx: add kernel support for EnGenius EPG5000.   John Crispin
• [OpenWrt-Devel] Split kernel modules out of the base opkg repo?   Matthias Schiffer
• [OpenWrt-Devel] Split kernel modules out of the base opkg repo?   Florian Fainelli
• [OpenWrt-Devel] Split kernel modules out of the base opkg repo?   Matthias Schiffer
• [OpenWrt-Devel] [PATCH] Add support for WeIO board. WeIO board (http://we-io.net) is based on Carambola2 module from 8Devices, and the patch adds a separate profile.   Drasko DRASKOVIC
• [OpenWrt-Devel] [PATCH 0/5] AR8216: New functionality and improvements   Heiner Kallweit
• [OpenWrt-Devel] [PATCH 1/5] AR8216: don't display MIB counters if all are empty   Heiner Kallweit
• [OpenWrt-Devel] [PATCH 2/5] AR8216: complement MIB counters with info in GiB / MiB / KiB   Heiner Kallweit
• [OpenWrt-Devel] [PATCH 3/5] AR8216: remove redundant port number in MIB header line   Heiner Kallweit
• [OpenWrt-Devel] [PATCH 4/5] AR8216: make ARL age time configurable   Heiner Kallweit
• [OpenWrt-Devel] [PATCH 5/5] AR8216: improve mmd register access   Heiner Kallweit
• [OpenWrt-Devel] [PATCH] Add WeIO board (http://we-io.net) profile. This patch adds support for WeIO board, which is based on Carambola2 board from 8Devices.   Drasko DRASKOVIC
• [OpenWrt-Devel] [PATCH] Add support for WeIO board. WeIO board (http://we-io.net) is based on Carambola2 module from 8Devices, and the patch adds a separate profile.   Karl Palsson
• [OpenWrt-Devel] [PATCH 1/2] sunxi: fix uboot install location   Zoltan HERPAI
• [OpenWrt-Devel] [PATCH] Add support for WeIO board. WeIO board (http://we-io.net) is based on Carambola2 module from 8Devices, and the patch adds a separate profile.   Drasko DRASKOVIC
• [OpenWrt-Devel] [PATCH 00/13] ramips: massive code cleanups   Piotr Dymacz
• [OpenWrt-Devel] [PATCH 01/13] ramips: fix indentation and other mistakes in .dts{, i} files   Piotr Dymacz
• [OpenWrt-Devel] [PATCH 02/13] ramips: remove leading spaces and sort boards alphabetically in base-files/lib/ramips.sh   Piotr Dymacz
• [OpenWrt-Devel] [PATCH 03/13] ramips: fix indentation, case statements structure and optimize base-files/etc/board.d/* scripts   Piotr Dymacz
• [OpenWrt-Devel] [PATCH 04/13] ramips: sort boards alphabetically and optimize base-files/etc/{diag.sh, board.d/*} scripts   Piotr Dymacz
• [OpenWrt-Devel] [PATCH 05/13] ramips: use consistent naming scheme for LEDs, for various manufacturers   Piotr Dymacz
• [OpenWrt-Devel] [PATCH 06/13] ramips: fix UPVEL model names   Piotr Dymacz
• [OpenWrt-Devel] [PATCH 07/13] ramips: change board name for Zbtlink WR8305RT to ZBT-WR8305RT   Piotr Dymacz
• [OpenWrt-Devel] [PATCH 08/13] ramips: remove unnecessary LED declaration for WT1520 in diag.sh   Piotr Dymacz
• [OpenWrt-Devel] [PATCH 09/13] ramips: use consistent naming scheme for LEDs in the remaining, branded devices   Piotr Dymacz
• [OpenWrt-Devel] [PATCH 10/13] ramips: change board name for Asus WL-330N{, 3G} to WL-330N{, 3G}   Piotr Dymacz
• [OpenWrt-Devel] [PATCH 11/13] ramips: rename dts file for Asus RT-N56U to RT-N56U.dts   Piotr Dymacz
• [OpenWrt-Devel] [PATCH 12/13] ramips: be consistent with case statement in base-files/lib/upgrade/platform.sh   Piotr Dymacz
• [OpenWrt-Devel] [PATCH 13/13] ramips: fix image name for Belkin F7C027   Piotr Dymacz
• [OpenWrt-Devel] obtaining openwrt linux kernel git repo for selected target   Antony Pavlov
• [OpenWrt-Devel] [PATCH 05/13] ramips: use consistent naming scheme for LEDs, for various manufacturers   Imre Kaloz
• [OpenWrt-Devel] [PATCH 05/13] ramips: use consistent naming scheme for LEDs, for various manufacturers   Piotr Dymacz
• [OpenWrt-Devel] [PATCH 05/13] ramips: use consistent naming scheme for LEDs, for various manufacturers   Jonas Gorski
• [OpenWrt-Devel] [PATCH] Add WeIO board (http://we-io.net) profile. This patch adds support for WeIO board, which is based on Carambola2 board from 8Devices.   Karl Palsson
• [OpenWrt-Devel] Syntax error in radvd.conf   Pratik Prajapati
• [OpenWrt-Devel] RFC: Preserving smbpasswd & dnsmasq.time across sysupgrade   Bastian Bittorf
• [OpenWrt-Devel] [PATCH 05/13] ramips: use consistent naming scheme for LEDs, for various manufacturers   Piotr Dymacz
• [OpenWrt-Devel] [PATCH 04/13] ramips: sort boards alphabetically and optimize base-files/etc/{diag.sh, board.d/*} scripts   Michael Bastian
• [OpenWrt-Devel] [PATCH] Workaround: saved administration site user and pass may appear on the Wireless configuration page, replacing the WPA key   Jo-Philipp Wich
• [OpenWrt-Devel] [PATCH] Allow editing of AP channel when all client networks are disabled   Jo-Philipp Wich
• [OpenWrt-Devel] [PATCH] Fix: Status for disabled wireless networks may display the SSID, BSSID and Mode of an active network on the same radio   Jo-Philipp Wich
• [OpenWrt-Devel] [PATCH] Fix: A disabled wireless network may be shown as enabled, when multiple networks are defined on the same radio   Jo-Philipp Wich
• [OpenWrt-Devel] [PATCH 04/13] ramips: sort boards alphabetically and optimize base-files/etc/{diag.sh, board.d/*} scripts   Piotr Dymacz
• [OpenWrt-Devel] [PATCH v2 0/3] fix mcs814x dLAN USB Extender   Günther Kelleter
• [OpenWrt-Devel] [PATCH v2 1/3] mcs814x: fix debug UART   Günther Kelleter
• [OpenWrt-Devel] [PATCH v2 2/3] mcs814x: fix interrupts   Günther Kelleter
• [OpenWrt-Devel] [PATCH v2 3/3] mcs814x: use firmware partition splitter on dLAN USB Extender   Günther Kelleter
• [OpenWrt-Devel] [PATCH 04/13] ramips: sort boards alphabetically and optimize base-files/etc/{diag.sh, board.d/*} scripts   Michael Bastian
• [OpenWrt-Devel] [PATCH V3] cdc_ncm: Add support for moving NDP to end of NCM frame   Matti Laakso
• [OpenWrt-Devel] [PATCH] bugfix: FORCE=1 doesn't work to override prereq checks   Bastian Bittorf
• [OpenWrt-Devel] [BB 14.07] hostapd: Update   jow at openwrt.org
• [OpenWrt-Devel] [PATCH v2 2/3] mcs814x: fix interrupts   Florian Fainelli
• [OpenWrt-Devel] [CC 15.05-rc3] lighttpd: Security update (CVE-2015-3200)   jow at openwrt.org
• [OpenWrt-Devel] [PATCH v2 1/3] mcs814x: fix debug UART   Florian Fainelli
• [OpenWrt-Devel] [PATCH v2 3/3] mcs814x: use firmware partition splitter on dLAN USB Extender   Florian Fainelli
• [OpenWrt-Devel] obtaining openwrt linux kernel git repo for selected target   Darik Horn
• [OpenWrt-Devel] EdgeRouter POE support   Wojtek Sawaściuk
• [OpenWrt-Devel] [PATCH] [brcm63xx] Add support for Plusnet 2704N   Matt Goring
• [OpenWrt-Devel] [PATCH v2 1/3] mcs814x: fix debug UART   Guenther Kelleter
• [OpenWrt-Devel] [PATCH v2 2/3] mcs814x: fix interrupts   Guenther Kelleter
• [OpenWrt-Devel] [PATCH] Bugfix: use correct PLL configuration register bitmask for QCA956x SoC   Dmitry Ivanov
• [OpenWrt-Devel] [PATCH] acx-mac80211: update git url   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH] toplevel.mk: fix distclean   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH v2 2/3] mcs814x: fix interrupts   Guenther Kelleter
• [OpenWrt-Devel] RB2011UiAS-RM Mikrotik/Routerboard   Marcelo Feitoza Parisi
• [OpenWrt-Devel] jail patches -> CC & trunk   Etienne Champetier
• [OpenWrt-Devel] openwrt-ar71xx GUI   John kerry
• [OpenWrt-Devel] openwrt-ar71xx GUI   David Lang
• [OpenWrt-Devel] [OpenWrt] 2.4Ghz limited to 50mW in DFS-ETSI   Nicola von Thadden
• [OpenWrt-Devel] (no subject)   L. D. Pinney
• [OpenWrt-Devel] [PATCH] ramips: Fix Ticket #20153 swap radio calibration data pointers on the RE6500   L. D. Pinney
• [OpenWrt-Devel] [PATCH] lantiq: Support newer versions of the PEF7071 ethernet PHYs   Martin Blumenstingl
• [OpenWrt-Devel] [PATCH] rampips: Fix pinmux functions for MT7621   Sven Eckelmann
• [OpenWrt-Devel] [OpenWrt] 2.4Ghz limited to 50mW in DFS-ETSI   Gerald Matzka
• [OpenWrt-Devel] [OpenWrt] 2.4Ghz limited to 50mW in DFS-ETSI   Ben West
• [OpenWrt-Devel] [OpenWrt] 2.4Ghz limited to 50mW in DFS-ETSI   Atanas Vladimirov
• [OpenWrt-Devel] [WDR3600] factory using WPS-button and tftp doesn't work anymore (new hardware?)   Leon George
• [OpenWrt-Devel] [PATCH v2] ar71xx: Allow to use ath79_gpio_output_select on QCA955x   Steve Brown
• [OpenWrt-Devel] [PATCH] dnsmasq: Bump to dnsmasq2.74   Kevin Darbyshire-Bryant
• [OpenWrt-Devel] [PATCH 1/7] kernel: add missing CONFIG_IR_IGORPLUGUSB symbol   Daniel Golle
• [OpenWrt-Devel] [PATCH 2/7] modules: move libahci to kmod-ata-core   Daniel Golle
• [OpenWrt-Devel] [PATCH 3/7] sunxi: reorganize kmod-ata-ahci-sunxi dependencies   Daniel Golle
• [OpenWrt-Devel] [PATCH 4/7] sunxi: prepare kernel 4.1 config and patches   Daniel Golle
• [OpenWrt-Devel] [PATCH 5/7] linux-firmware: use newer upstream, package brcmfmac-firmware   Daniel Golle
• [OpenWrt-Devel] [PATCH 6/7] ap6210-firmware: new package   Daniel Golle
• [OpenWrt-Devel] [PATCH 7/7] sunxi: improve BananaPro package profile   Daniel Golle
• [OpenWrt-Devel] [PATCH 1/2] oxnas: prepare for kernel 4.1   Daniel Golle
• [OpenWrt-Devel] [PATCH 2/2] oxnas: switch to kernel 4.1   Daniel Golle
• [OpenWrt-Devel] [PATCH 5/7] linux-firmware: use newer upstream, package brcmfmac-firmware   Rafał Miłecki
• [OpenWrt-Devel] [PATCH 5/7] linux-firmware: use newer upstream, package brcmfmac-firmware   Daniel Golle
• [OpenWrt-Devel] [PATCH 5/7] linux-firmware: use newer upstream, package brcmfmac-firmware   Rafał Miłecki
• [OpenWrt-Devel] [PATCH 6/6] bcm53xx: R8000 handle PEX8603 switch   Rafał Miłecki
• [OpenWrt-Devel] [PATCH] ar71xx: Fix gpio_count setting for QCA953x in ath79_gpio_output_select   Sven Eckelmann
• [OpenWrt-Devel] [PATCH v2] dnsmasq: Bump to dnsmasq2.74   Kevin Darbyshire-Bryant
• [OpenWrt-Devel] OpenWRT default settings   John kerry
• [OpenWrt-Devel] [OpenWrt] 2.4Ghz limited to 50mW in DFS-ETSI   Nicola von Thadden
• [OpenWrt-Devel] [PATCH] lantiq: get more status information from xDSL   feckert
• [OpenWrt-Devel] [PATCH] include/kernel.mk - better search for ARCH   Alexey Brodkin
• [OpenWrt-Devel] [PATCH] update config.guess & config.sub   Alexey Brodkin
• [OpenWrt-Devel] [PATCHv2 5/7] mac80211/linux-firmware: include firmware for brcmfmac-sdio   Daniel Golle
• [OpenWrt-Devel] [PATCH 5/7] linux-firmware: use newer upstream, package brcmfmac-firmware   Daniel Golle
• [OpenWrt-Devel] [PATCHv2 6/7] ap6210-nvram: new package   Daniel Golle
• [OpenWrt-Devel] [PATCH] include/kernel.mk - better search for ARCH   Felix Fietkau
• [OpenWrt-Devel] [PATCH] include/kernel.mk - better search for ARCH   Alexey Brodkin
• [OpenWrt-Devel] [PATCH v2] include/kernel.mk - better search for ARCH   Alexey Brodkin
• [OpenWrt-Devel] RFC: Preserving smbpasswd & dnsmasq.time across sysupgrade   Kevin Darbyshire-Bryant
• [OpenWrt-Devel] [PATCH] rampips: Fix pinmux functions for MT7621   John Crispin
• [OpenWrt-Devel] [PATCH 00/13] ramips: massive code cleanups   John Crispin
• [OpenWrt-Devel] [PATCH 00/13] ramips: massive code cleanups   Piotr Dymacz
• [OpenWrt-Devel] [OpenWrt] 2.4Ghz limited to 50mW in DFS-ETSI   Ben West
• [OpenWrt-Devel] [OpenWrt] 2.4Ghz limited to 50mW in DFS-ETSI   Gerald Matzka
• [OpenWrt-Devel] [PATCHv2 5/7] mac80211/linux-firmware: include firmware for brcmfmac-sdio   Rafał Miłecki
• [OpenWrt-Devel] AR71xx openWRT Default config file   John kerry
• [OpenWrt-Devel] how to control PA in mt7620a ralink-soc?   Soulkey
• [OpenWrt-Devel] [OpenWrt] 2.4Ghz limited to 50mW in DFS-ETSI   David Lang
• [OpenWrt-Devel] [PATCH] [brcm63xx] Add support for Plusnet 2704N   Jonas Gorski
• [OpenWrt-Devel] [PATCH] lantiq: get more status information from xDSL   Martin Blumenstingl
• [OpenWrt-Devel] [WDR3600] factory using WPS-button and tftp doesn't work anymore (new hardware?)   Leon George
• [OpenWrt-Devel] [PATCH] rampips: Fix pinmux functions for MT7621   Sven Eckelmann
• [OpenWrt-Devel] [PATCH 1/5] brcm2708-gpu-fw: update to latest version   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 2/5] brcm2708: use BuildDTB in image/Makefile   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 3/5] brcm2708: update 4.1 patches   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 4/5] brcm2708: override disabled device tree module status from config.txt   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 5/5] brcm2708: fix kmod-sound-soc-iqaudio-dac and add missing symbol   Álvaro Fernández Rojas
• [OpenWrt-Devel] EdgeRouter POE support   Stijn Tintel
• [OpenWrt-Devel] [PATCH] iwinfo: do not wait for scan results if scan request failed.   Dmitry Ivanov
• [OpenWrt-Devel] [PATCH v2] lantiq: get more status information from xDSL   feckert
• [OpenWrt-Devel] [PATCH] Restore AP scan patch   Dmitry Ivanov
• [OpenWrt-Devel] Change OpenWrt Wifi default settings   John kerry
• [OpenWrt-Devel] [PATCH v2 1/4] ramips: Fix uart2/uart3 pinmux order on MT7621   Sven Eckelmann
• [OpenWrt-Devel] [PATCH v2 2/4] ramips: Fix amount of MT7621 pins controlled by spi group   Sven Eckelmann
• [OpenWrt-Devel] [PATCH v2 3/4] ramips: Fix MT7621 pinmux bits for uart3, uart2, mdio   Sven Eckelmann
• [OpenWrt-Devel] [PATCH v2 4/4] ramips: Fix pinmux functions for MT7621   Sven Eckelmann
• [OpenWrt-Devel] [PATCH] rampips: Fix pinmux functions for MT7621   Sven Eckelmann
• [OpenWrt-Devel] [PATCH] rampips: Fix pinmux functions for MT7621   John Crispin
• [OpenWrt-Devel] Change OpenWrt Wifi default settings   N.Leiten
• [OpenWrt-Devel] Change OpenWrt Wifi default settings   David Lang
• [OpenWrt-Devel] [PATCH] [brcm63xx] Add support for Plusnet 2704N   Matt Goring
• [OpenWrt-Devel] package makefile help   Pratik Prajapati
• [OpenWrt-Devel] [PATCH v3 0/3] fix mcs814x dLAN USB Extender   Günther Kelleter
• [OpenWrt-Devel] [PATCH v3 1/3] mcs814x: fix debug UART   Günther Kelleter
• [OpenWrt-Devel] [PATCH v3 2/3] mcs814x: fix interrupts   Günther Kelleter
• [OpenWrt-Devel] [PATCH v3 3/3] mcs814x: use firmware partition splitter on dLAN USB Extender   Günther Kelleter
• [OpenWrt-Devel] [PATCH 1/2] sunxi: fix uboot install location   Zoltan HERPAI
• [OpenWrt-Devel] package makefile help   Luiz Angelo Daros de Luca
• [OpenWrt-Devel] [PATCH 6/7] ap6210-firmware: new package   Zoltan HERPAI
• [OpenWrt-Devel] [PATCH 2/7] modules: move libahci to kmod-ata-core   Zoltan HERPAI
• [OpenWrt-Devel] [PATCH 4/7] sunxi: prepare kernel 4.1 config and patches   Zoltan HERPAI
• [OpenWrt-Devel] [PATCH] Restore AP scan patch   Felix Fietkau

Last message date: Fri Jul 31 15:50:59 EDT 2015
Archived on: Thu Jun 25 05:56:12 EDT 2020

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...