[OpenWrt-Devel] [PATCH v2 3/3] mcs814x: use firmware partition splitter on dLAN USB Extender
Florian Fainelli
florian at openwrt.org
Mon Jul 27 13:53:42 EDT 2015
On Jul 27, 2015 3:55 AM, "Günther Kelleter" <guenther.kelleter at devolo.de>
wrote:
Looks good to me, having a better commit message would be welcome.
>
> Signed-off-by: Günther Kelleter <guenther.kelleter at devolo.de>
> ---
> target/linux/mcs814x/config-3.18 | 4
++++
> .../mcs814x/files-3.18/arch/arm/boot/dts/dlan-usb-extender.dts | 8
--------
> target/linux/mcs814x/image/Makefile | 2 +-
> 3 files changed, 5 insertions(+), 9 deletions(-)
>
> diff --git a/target/linux/mcs814x/config-3.18
b/target/linux/mcs814x/config-3.18
> index e57f5ff..427a7c9 100644
> --- a/target/linux/mcs814x/config-3.18
> +++ b/target/linux/mcs814x/config-3.18
> @@ -159,6 +159,10 @@ CONFIG_MODULES_USE_ELF_REL=y
> # CONFIG_MTD_IMPA7 is not set
> CONFIG_MTD_JEDECPROBE=y
> CONFIG_MTD_PHYSMAP=y
> +# CONFIG_MTD_ROOTFS_SPLIT is not set
> +CONFIG_MTD_SPLIT_FIRMWARE=y
> +CONFIG_MTD_SPLIT_FIRMWARE_NAME="linux"
> +CONFIG_MTD_SPLIT_UIMAGE_FW=y
> CONFIG_MULTI_IRQ_HANDLER=y
> CONFIG_NEED_DMA_MAP_STATE=y
> CONFIG_NEED_KUSER_HELPERS=y
> diff --git
a/target/linux/mcs814x/files-3.18/arch/arm/boot/dts/dlan-usb-extender.dts
b/target/linux/mcs814x/files-3.18/arch/arm/boot/dts/dlan-usb-extender.dts
> index 0c85b94..59830e8 100644
> ---
a/target/linux/mcs814x/files-3.18/arch/arm/boot/dts/dlan-usb-extender.dts
> +++
b/target/linux/mcs814x/files-3.18/arch/arm/boot/dts/dlan-usb-extender.dts
> @@ -48,14 +48,6 @@
> reg = <0x40000 0x10000>;
> };
> partition at 50000 {
> - label = "kernel";
> - reg = <0x50000 0x100000>;
> - };
> - partition at 150000 {
> - label = "rootfs";
> - reg = <0x150000 0x3C0000>;
> - };
> - partition at 50001 {
> label = "linux";
> reg = <0x50000 0x4C0000>;
> };
> diff --git a/target/linux/mcs814x/image/Makefile
b/target/linux/mcs814x/image/Makefile
> index 4c8af97..74f8ad4 100644
> --- a/target/linux/mcs814x/image/Makefile
> +++ b/target/linux/mcs814x/image/Makefile
> @@ -30,7 +30,7 @@ define Image/Build/DTB
> endef
>
> define Image/Build/Profile/dLAN_USB_Extender
> - dd if=$(KDIR)/uImage-dlan-usb-extender bs=1M conv=sync
of=$(KDIR)/$(IMG_PREFIX)-dlan-usb-extender-upgrade-$(1).bin
> + dd if=$(KDIR)/uImage-dlan-usb-extender bs=64k conv=sync
of=$(KDIR)/$(IMG_PREFIX)-dlan-usb-extender-upgrade-$(1).bin
> cat $(KDIR)/root.$(1) >>
$(KDIR)/$(IMG_PREFIX)-dlan-usb-extender-upgrade-$(1).bin
> cp $(KDIR)/$(IMG_PREFIX)-dlan-usb-extender-upgrade-$(1).bin
$(BIN_DIR)/
> endef
> --
> 2.4.6.89.g851dcf4
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20150727/8906784c/attachment.htm>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list