[OpenWrt-Devel] [PATCH v2 2/3] mcs814x: fix interrupts

[Günther Kelleter]

create explicit 1:1 mapping before mcs814x_alloc_gc/irq_setup_generic_chip
marks all interrupts used and prevents mapping by dts init.
IRQ 0 is the timer interrupt and is not illegal!

Was broken since kernel 3.14.

Signed-off-by: Günther Kelleter <guenther.kelleter at devolo.de>
---
 target/linux/mcs814x/files-3.18/arch/arm/mach-mcs814x/irq.c |  6 +++++-
 target/linux/mcs814x/patches-3.18/015-timer-irq.patch       | 11 +++++++++++
 2 files changed, 16 insertions(+), 1 deletion(-)
 create mode 100644 target/linux/mcs814x/patches-3.18/015-timer-irq.patch

diff --git a/target/linux/mcs814x/files-3.18/arch/arm/mach-mcs814x/irq.c b/target/linux/mcs814x/files-3.18/arch/arm/mach-mcs814x/irq.c
index f84c412..fd4345f 100644
--- a/target/linux/mcs814x/files-3.18/arch/arm/mach-mcs814x/irq.c
+++ b/target/linux/mcs814x/files-3.18/arch/arm/mach-mcs814x/irq.c
@@ -71,6 +71,7 @@ static const struct of_device_id mcs814x_intc_ids[] = {
 void __init mcs814x_of_irq_init(void)
 {
 	struct device_node *np;
+	struct irq_domain *domain;
 
 	np = of_find_matching_node(NULL, mcs814x_intc_ids);
 	if (!np)
@@ -80,7 +81,10 @@ void __init mcs814x_of_irq_init(void)
 	if (!mcs814x_intc_base)
 		panic("unable to map intc cpu registers\n");
 
-	irq_domain_add_simple(np, 32, 0, &irq_generic_chip_ops, NULL);
+	domain = irq_domain_add_simple(np, 32, 0, &irq_domain_simple_ops, NULL);
+	if (!domain)
+		panic("unable to add irq domain\n");
+	irq_create_strict_mappings(domain, 0, 0, 32);
 
 	of_node_put(np);
 
diff --git a/target/linux/mcs814x/patches-3.18/015-timer-irq.patch b/target/linux/mcs814x/patches-3.18/015-timer-irq.patch
new file mode 100644
index 0000000..9bbb094
--- /dev/null
+++ b/target/linux/mcs814x/patches-3.18/015-timer-irq.patch
@@ -0,0 +1,11 @@
+--- a/kernel/irq/irqdesc.c
++++ b/kernel/irq/irqdesc.c
+@@ -381,7 +381,7 @@ int __handle_domain_irq(struct irq_domai
+ 	 * Some hardware gives randomly wrong interrupts.  Rather
+ 	 * than crashing, do something sensible.
+ 	 */
+-	if (unlikely(!irq || irq >= nr_irqs)) {
++	if (unlikely(irq >= nr_irqs)) {
+ 		ack_bad_irq(irq);
+ 		ret = -EINVAL;
+ 	} else {
-- 
2.4.6.89.g851dcf4
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel