[OpenWrt-Devel] [PATCH] ramips: adding support for OY-0001 Wireless Router
Karl Palsson
karlp at tweak.net.au
Fri Jul 10 07:27:55 EDT 2015
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Isn't this normally called the "OYE-0001" ? not "OY-0001" ? The website
and all literature I've seen uses the "OYE-0001" name...
Regardless, in many places, you have not followed the existing
alphabetical order.
LiWeijian <younfan33 at hotmail.com> wrote:
> From: Tom Deng <2579131212 at qq.com>
>
> Adding support for OY-0001 Wireless Router.
> OY-0001 is a wireless router made by oyewifi.com. Below is the details:
> MT7620A, 128MB DDR2, 16MB FLASH, SD Slot, USB 2.0, 4 x LAN + 1 x WAN.
> Signed-off-by: Tom Deng <2579131212 at qq.com>
> ---
> diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds
> b/target/linux/ramips/base-files/etc/board.d/01_leds
> index 545bd70..fe3a79d 100755
> --- a/target/linux/ramips/base-files/etc/board.d/01_leds
> +++ b/target/linux/ramips/base-files/etc/board.d/01_leds
> @@ -238,6 +238,10 @@ case $board in
> set_wifi_led "zbtlink:blue:air"
> set_usb_led "zbtlink:blue:usb"
> ;;
> + oy-0001)
> + ucidef_set_led_default "power" "power" "oy:green:power" "1"
> + set_wifi_led "oy:green:wifi"
> + ;;
> wr8305rt)
> ucidef_set_led_default "power" "power" "wr8305rt:sys" "1"
> set_usb_led "wr8305rt:usb"
> diff --git a/target/linux/ramips/base-files/etc/board.d/02_network
> b/target/linux/ramips/base-files/etc/board.d/02_network
> index bc1fc01..9fb3535 100755
> --- a/target/linux/ramips/base-files/etc/board.d/02_network
> +++ b/target/linux/ramips/base-files/etc/board.d/02_network
> @@ -139,6 +139,7 @@ ramips_setup_interfaces()
> mzk-750dhp | \
> whr-300hp2 | \
> whr-600d | \
> + oy-0001 | \
> wsr-600 | \
> wsr-1166 | \
> wt1520 | \
> @@ -283,6 +284,11 @@ ramips_setup_macs()
> wan_mac=$(mtd_get_mac_binary devdata 7)
> ;;
>
> + oy-0001)
> + lan_mac=$(mtd_get_mac_binary factory 40)
> + wan_mac=$(mtd_get_mac_binary factory 46)
> + ;;
> +
> w306r-v20)
> lan_mac=$(cat /sys/class/net/eth0/address)
> wan_mac=$(macaddr_add "$lan_mac" 5)
> diff --git a/target/linux/ramips/base-files/lib/ramips.sh
> b/target/linux/ramips/base-files/lib/ramips.sh
> index d2a1856..3d40ab9 100755
> --- a/target/linux/ramips/base-files/lib/ramips.sh
> +++ b/target/linux/ramips/base-files/lib/ramips.sh
> @@ -400,6 +400,9 @@ ramips_board_detect() {
> *"Zbtlink ZBT-WA05")
> name="zbt-wa05"
> ;;
> + *"OY-0001")
> + name="oy-0001"
> + ;;
> *"ZBT WR8305RT")
> name="wr8305rt"
> ;;
> diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh
> b/target/linux/ramips/base-files/lib/upgrade/platform.sh
> index cedd62b..8f45a84 100755
> --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
> +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
> @@ -116,6 +116,7 @@ platform_check_image() {
> wr6202 |\
> wr8305rt |\
> wrtnode |\
> + oy-0001 |\
> wt1520 |\
> wt3020 |\
> x5 |\
> diff --git a/target/linux/ramips/dts/OY-0001.dts
> b/target/linux/ramips/dts/OY-0001.dts
> new file mode 100644
> index 0000000..48b7099
> --- /dev/null
> +++ b/target/linux/ramips/dts/OY-0001.dts
> @@ -0,0 +1,123 @@
> +/dts-v1/;
> +
> +/include/ "mt7620a.dtsi"
> +
> +/ {
> + compatible = "ralink,mt7620a-soc";
> + model = "OY-0001";
> +
> + chosen {
> + bootargs = "console=ttyS0,115200";
> + };
> +
> + palmbus at 10000000 {
> + gpio2: gpio at 660 {
> + status = "okay";
> + };
> +
> + gpio3: gpio at 688 {
> + status = "okay";
> + };
> +
> + spi at b00 {
> + status = "okay";
> +
> + m25p80 at 0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "w25q128";
> + reg = <0 0>;
> + linux,modalias = "m25p80", "w25q128";
> + spi-max-frequency = <10000000>;
> +
> + partition at 0 {
> + label = "u-boot";
> + reg = <0x0 0x30000>;
> + read-only;
> + };
> +
> + partition at 30000 {
> + label = "u-boot-env";
> + reg = <0x30000 0x10000>;
> + read-only;
> + };
> +
> + factory: partition at 40000 {
> + label = "factory";
> + reg = <0x40000 0x10000>;
> + read-only;
> + };
> +
> + partition at 50000 {
> + label = "firmware";
> + reg = <0x50000 0xfb0000>;
> + };
> +
> + };
> + };
> + };
> +
> + pinctrl {
> + state_default: pinctrl0 {
> + gpio {
> + ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd";
> + ralink,function = "gpio";
> + };
> + };
> + };
> +
> + ethernet at 10100000 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&ephy_pins>;
> +
> + ralink,port-map = "llllw";
> + };
> +
> + gsw at 10110000 {
> + ralink,port4 = "ephy";
> + };
> +
> + wmac at 10180000 {
> + ralink,mtd-eeprom = <&factory 0>;
> + };
> +
> + gpio-leds {
> + compatible = "gpio-leds";
> + powerled {
> + label = "oy:green:power";
> + gpios = <&gpio0 9 1>;
> + };
> + wifiled {
> + label = "oy:green:wifi";
> + gpios = <&gpio3 0 1>;
> + };
> + };
> +
> + sdhci at 10130000 {
> + status = "okay";
> + };
> +
> + ehci at 101c0000 {
> + status = "okay";
> + };
> +
> + ohci at 101c1000 {
> + status = "okay";
> + };
> +
> + pcie at 10140000 {
> + status = "okay";
> + };
> +
> + gpio-keys-polled {
> + compatible = "gpio-keys-polled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + poll-interval = <20>;
> + s1 {
> + label = "reset";
> + gpios = <&gpio0 1 1>;
> + linux,code = <0x198>;
> + };
> + };
> +};
> diff --git a/target/linux/ramips/image/Makefile
> b/target/linux/ramips/image/Makefile
> index 0c28216..2fe5fdd 100644
> --- a/target/linux/ramips/image/Makefile
> +++ b/target/linux/ramips/image/Makefile
> @@ -866,6 +866,7 @@ Image/Build/Profile/DIR-810L=$(call BuildFirmware/CustomFlash/$(1),$(1),dir-810l
> na930_mtd_size=20971520
> Image/Build/Profile/NA930=$(call BuildFirmware/CustomFlash/$(1),$(1),na930,NA930,$(na930_mtd_size))
> Image/Build/Profile/MZK-750DHP=$(call BuildFirmware/Default8M/$(1),$(1),mzk-750dhp,MZK-750DHP)
> +Image/Build/Profile/OY-0001=$(call BuildFirmware/Default16M/$(1),$(1),oy-0001,OY-0001)
> Image/Build/Profile/Y1=$(call BuildFirmware/Default16M/$(1),$(1),Lenovo-y1,Y1)
> Image/Build/Profile/Y1S=$(call BuildFirmware/Default16M/$(1),$(1),Lenovo-y1s,Y1S)
> Image/Build/Profile/MLW221=$(call BuildFirmware/Default16M/$(1),$(1),mlw221,MLW221)
> @@ -899,6 +900,7 @@ define Image/Build/Profile/Default
> $(call Image/Build/Profile/WHR1166D,$(1))
> $(call Image/Build/Profile/MZK-750DHP,$(1))
> $(call Image/Build/Profile/NA930,$(1))
> + $(call Image/Build/Profile/OY-0001,$(1))
> $(call Image/Build/Profile/Y1,$(1))
> $(call Image/Build/Profile/Y1S,$(1))
> $(call Image/Build/Profile/MLW221,$(1))
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
- --
Sent using Mailpile, Free Software from www.mailpile.is
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQIcBAEBAgAGBQJVn6w8AAoJEBmotQ/U1cr2IxwQAJcAJAAU3Xxq13eDCZ7+DaV/
OTV1SusODWC++4eJ4HxaDFJ6r4RKVo/0B5f8i70HLz+I2r4dWM60E8J7shWoaSsv
K+aV/pUj50klZuzAXpekDitezYSRi2m7l40IcMrF29x+PZYzr6bdeiJOp+BkTrKh
oo7NN9QykgMwmZy+LoKdgoGtwgIWa1oxZHY1ppI2CCIbGiis+eeusyqp6kPvLUee
y4dzGTFk3oend3LP1DGpW8MmOXFVaCksQIs3RhTGgc2IUQ0dpIpbDYVA3MnaRq95
s824pG++vE0iCnWrpK9ij518GFvRvhn4kTaE6Xy0T/LmgDKq4DGpCZ3en0dVYzeJ
Ln/FyIwvuALFkPEr2WqWXEAvPIPyuUxViOXpL5XRhGQ1Grnhzl0vwMRzKXq6VBus
QvWVzREupNygD+3iHcJ93zOJFSF+AuvlU5JRS+88Lg8URmX8gEC+R7hulO8Cs2Uc
0TXg1tYmoUS3AJFZWUebQIlvX66gXHYZs+jTMM1zHRSrZ0Xn6DVUFEQ3oxcuhl2k
12/sGJusstgMyT30HLPLUHBb7fuw7T7f3149uyi4c8L5WYuzo+fNcbSFckBcP4Cw
jTSjr960T1fBfIXTn/Mj7zlDsk3ntzImNg0uwgohqt2SjLUOR20zPhfrgGXT4fN5
T7K9ToSMM4QcGLaSx0ry
=Qc6u
-----END PGP SIGNATURE-----
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list