[OpenWrt-Devel] [PATCH]v3: CC : ar71xx: Backport Support for the Bitmain Antminer S3
L. D. Pinney
ldpinney at gmail.com
Wed Jul 22 16:27:38 EDT 2015
Backport of r46236 to CC : add support for the Bitmain Antminer S3
Signed-off-by: L. D. Pinney <ldpinney at gmail.com>
---
V3 adds the *support.patch missing in V2
target/linux/ar71xx/base-files/etc/diag.sh | 3 +-
target/linux/ar71xx/base-files/etc/uci-defaults/01_leds | 6 ++++
target/linux/ar71xx/base-files/etc/uci-defaults/02_network | 1 +
target/linux/ar71xx/base-files/lib/ar71xx.sh | 3 ++
target/linux/ar71xx/base-files/lib/upgrade/platform.sh | 2 ++
target/linux/ar71xx/config-3.18 | 1 +
target/linux/ar71xx/files/arch/mips/ath79/mach-antminer-s3.c | 98 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
target/linux/ar71xx/generic/profiles/antminer.mk | 11 +++++++
target/linux/ar71xx/image/Makefile | 10 ++++++-
target/linux/ar71xx/patches-3.18/905-MIPS-ath79-bitmain-antminer-s3-support.patch | 45 ++++++++++++++++++++++++++++
tools/firmware-utils/src/mktplinkfw.c | 1 +
11 files changed, 179 insertions(+), 2 deletions(-)
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index 4bdb53d..843e709 100644
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -12,7 +12,8 @@ get_status_led() {
all0305)
status_led="eap7660d:green:ds4"
;;
- antminer-s1)
+ antminer-s1|\
+ antminer-s3)
status_led="bitmain:green:system"
;;
ap132)
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
index 19814f4..5126497 100644
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
@@ -36,6 +36,12 @@ antminer-s1)
ucidef_set_led_wlan "wlan" "WLAN" "bitmain:green:wlan" "phy0tpt"
;;
+antminer-s3)
+ ucidef_set_led_wlan "wlan" "WLAN" "bitmain:green:wlan" "phy0tpt"
+ ucidef_set_led_default "sys" "SYS" "bitmain:green:sys" "0"
+ ucidef_set_led_default "lan" "LAN" "bitmain:yellow:lan" "0"
+ ;;
+
ap113)
ucidef_set_led_usbdev "usb" "USB" "ap113:green:usb" "1-1"
;;
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
index 4fe951e..ea5ba91 100644
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
@@ -344,6 +344,7 @@ wp543)
;;
antminer-s1 |\
+antminer-s3 |\
dir-505-a1)
ucidef_set_interface_lan "eth1"
;;
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index 8f4bb40..1aa90fe 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -110,6 +110,9 @@ tplink_board_detect() {
"04440001"*)
model="BITMAIN ANTMINER S1"
;;
+ "04440003"*)
+ model="BITMAIN ANTMINER S3"
+ ;;
"120000"*)
model="MERCURY MAC1200R"
;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index ade47fb..da4c9fa 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -299,6 +299,8 @@ platform_check_image() {
return 1
;;
+ antminer-s1 | \
+ antminer-s3 | \
archer-c5 | \
archer-c7 | \
el-m150 | \
diff --git a/target/linux/ar71xx/config-3.18 b/target/linux/ar71xx/config-3.18
index 05c98eb..b051c90 100644
--- a/target/linux/ar71xx/config-3.18
+++ b/target/linux/ar71xx/config-3.18
@@ -41,6 +41,7 @@ CONFIG_ATH79_MACH_AP96=y
CONFIG_ATH79_MACH_ARCHER_C7=y
CONFIG_ATH79_MACH_AW_NR580=y
CONFIG_ATH79_MACH_ANTMINER_S1=y
+CONFIG_ATH79_MACH_ANTMINER_S3=y
CONFIG_ATH79_MACH_BHU_BXU2000N2_A=y
CONFIG_ATH79_MACH_CAP4200AG=y
CONFIG_ATH79_MACH_CARAMBOLA2=y
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-antminer-s3.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-antminer-s3.c
new file mode 100644
index 0000000..010c461
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-antminer-s3.c
@@ -0,0 +1,98 @@
+/*
+ * Bitmain Antminer S3 board support
+ *
+ * Copyright (C) 2015 L. D. Pinney <ldpinney at gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+#include "dev-usb.h"
+
+#define ANTMINER_S3_GPIO_LED_WLAN 0
+#define ANTMINER_S3_GPIO_LED_SYSTEM 17
+#define ANTMINER_S3_GPIO_LED_LAN 22
+
+#define ANTMINER_S3_GPIO_BTN_RESET 11
+
+#define ANTMINER_S3_KEYSPOLL_INTERVAL 88 /* msecs */
+#define ANTMINER_S3_KEYSDEBOUNCE_INTERVAL (3 * ANTMINER_S3_KEYSPOLL_INTERVAL)
+
+static const char *ANTMINER_S3_part_probes[] = {
+ "tp-link",
+ NULL,
+};
+
+static struct flash_platform_data ANTMINER_S3_flash_data = {
+ .part_probes = ANTMINER_S3_part_probes,
+};
+
+static struct gpio_led ANTMINER_S3_leds_gpio[] __initdata = {
+ {
+ .name = "bitmain:green:wlan",
+ .gpio = ANTMINER_S3_GPIO_LED_WLAN,
+ .active_low = 0,
+ },{
+ .name = "bitmain:green:system",
+ .gpio = ANTMINER_S3_GPIO_LED_SYSTEM,
+ .active_low = 0,
+ },{
+ .name = "bitmain:yellow:lan",
+ .gpio = ANTMINER_S3_GPIO_LED_LAN,
+ .active_low = 0,
+ },
+};
+
+static struct gpio_keys_button ANTMINER_S3_GPIO_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = ANTMINER_S3_KEYSDEBOUNCE_INTERVAL,
+ .gpio = ANTMINER_S3_GPIO_BTN_RESET,
+ .active_low = 0,
+ },
+};
+
+static void __init antminer_s3_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ /* disable PHY_SWAP and PHY_ADDR_SWAP bits */
+ ath79_setup_ar933x_phy4_switch(false, false);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ANTMINER_S3_leds_gpio),
+ ANTMINER_S3_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, ANTMINER_S3_KEYSPOLL_INTERVAL,
+ ARRAY_SIZE(ANTMINER_S3_GPIO_keys),
+ ANTMINER_S3_GPIO_keys);
+ ath79_register_usb();
+
+ ath79_register_m25p80(&ANTMINER_S3_flash_data);
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1);
+
+ ath79_register_mdio(0, 0x0);
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ath79_register_wmac(ee, mac);
+}
+
+MIPS_MACHINE(ATH79_MACH_ANTMINER_S3, "ANTMINER-S3",
+ "Bitmain Antminer S3", antminer_s3_setup);
diff --git a/target/linux/ar71xx/generic/profiles/antminer.mk b/target/linux/ar71xx/generic/profiles/antminer.mk
index 366982c..404133b 100644
--- a/target/linux/ar71xx/generic/profiles/antminer.mk
+++ b/target/linux/ar71xx/generic/profiles/antminer.mk
@@ -15,3 +15,14 @@ define Profile/ANTMINER_S1/Description
Package set optimized for the Bitmain Antminer S1.
endef
$(eval $(call Profile,ANTMINER_S1))
+
+define Profile/ANTMINER_S3
+ NAME:=Antminer S3
+ PACKAGES:=kmod-usb-core kmod-usb2 kmod-crypto-manager kmod-i2c-gpio-custom kmod-usb-hid
+endef
+
+
+define Profile/ANTMINER_S1/Description
+ Package set optimized for the Bitmain Antminer S3.
+endef
+$(eval $(call Profile,ANTMINER_S3))
diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile
index a2a66b8..d5a06a6 100644
--- a/target/linux/ar71xx/image/Makefile
+++ b/target/linux/ar71xx/image/Makefile
@@ -287,6 +287,14 @@ define Device/antminer-s1
CONSOLE := ttyATH0,115200
endef
+define Device/antminer-s3
+ $(Device/tplink-8mlzma)
+ BOARDNAME := ANTMINER-S3
+ DEVICE_PROFILE := ANTMINER_S3
+ TPLINK_HWID := 0x04440003
+ CONSOLE := ttyATH0,115200
+endef
+
define Device/el-m150
$(Device/tplink-8mlzma)
BOARDNAME := EL-M150
@@ -302,7 +310,7 @@ define Device/el-mini
TPLINK_HWID := 0x01530001
CONSOLE := ttyATH0,115200
endef
-TARGET_DEVICES += antminer-s1 el-m150 el-mini
+TARGET_DEVICES += antminer-s1 antminer-s3 el-m150 el-mini
define Device/gl-inet-6408A-v1
$(Device/tplink-8mlzma)
diff --git a/target/linux/ar71xx/patches-3.18/905-MIPS-ath79-bitmain-antminer-s3-support.patch b/target/linux/ar71xx/patches-3.18/905-MIPS-ath79-bitmain-antminer-s3-support.patch
new file mode 100644
index 0000000..13dac2e
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/905-MIPS-ath79-bitmain-antminer-s3-support.patch
@@ -0,0 +1,45 @@
+Index: linux-3.18.18/arch/mips/ath79/Kconfig
+===================================================================
+--- linux-3.18.18.orig/arch/mips/ath79/Kconfig
++++ linux-3.18.18/arch/mips/ath79/Kconfig
+@@ -66,6 +66,16 @@ config ATH79_MACH_ANTMINER_S1
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
++config ATH79_MACH_ANTMINER_S3
++ bool "Bitmain Antminer S3 support"
++ select SOC_AR933X
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
++ select ATH79_DEV_WMAC
++
+ config ATH79_MACH_AP113
+ bool "Atheros AP113 board support"
+ select SOC_AR724X
+Index: linux-3.18.18/arch/mips/ath79/Makefile
+===================================================================
+--- linux-3.18.18.orig/arch/mips/ath79/Makefile
++++ linux-3.18.18/arch/mips/ath79/Makefile
+@@ -43,6 +43,7 @@ obj-$(CONFIG_ATH79_MACH_ALFA_NX) += mach
+ obj-$(CONFIG_ATH79_MACH_ALL0258N) += mach-all0258n.o
+ obj-$(CONFIG_ATH79_MACH_ALL0315N) += mach-all0315n.o
+ obj-$(CONFIG_ATH79_MACH_ANTMINER_S1)+= mach-antminer-s1.o
++obj-$(CONFIG_ATH79_MACH_ANTMINER_S3)+= mach-antminer-s3.o
+ obj-$(CONFIG_ATH79_MACH_AP113) += mach-ap113.o
+ obj-$(CONFIG_ATH79_MACH_AP121) += mach-ap121.o
+ obj-$(CONFIG_ATH79_MACH_AP132) += mach-ap132.o
+Index: linux-3.18.18/arch/mips/ath79/machtypes.h
+===================================================================
+--- linux-3.18.18.orig/arch/mips/ath79/machtypes.h
++++ linux-3.18.18/arch/mips/ath79/machtypes.h
+@@ -22,6 +22,7 @@ enum ath79_mach_type {
+ ATH79_MACH_ALL0305, /* Allnet ALL0305 */
+ ATH79_MACH_ALL0315N, /* Allnet ALL0315N */
+ ATH79_MACH_ANTMINER_S1, /* Bitmain Antminer S1 */
++ ATH79_MACH_ANTMINER_S3, /* Bitmain Antminer S3 */
+ ATH79_MACH_AP113, /* Atheros AP113 reference board */
+ ATH79_MACH_AP121, /* Atheros AP121 reference board */
+ ATH79_MACH_AP121_MINI, /* Atheros AP121-MINI reference board */
diff --git a/tools/firmware-utils/src/mktplinkfw.c b/tools/firmware-utils/src/mktplinkfw.c
index 09536c6..8c543eb 100644
--- a/tools/firmware-utils/src/mktplinkfw.c
+++ b/tools/firmware-utils/src/mktplinkfw.c
@@ -31,6 +31,7 @@
#define HEADER_VERSION_V1 0x01000000
#define HWID_ANTMINER_S1 0x04440001
+#define HWID_ANTMINER_S3 0x04440003
#define HWID_GL_INET_V1 0x08000001
#define HWID_GS_OOLITE_V1 0x3C000101
#define HWID_TL_MR10U_V1 0x00100101
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list