[OpenWrt-Devel] Archer C7 CC 15.05-rc1 Ath9K phy1: Failed to stop TX DMA, queues=0x002!

[camden lindsay]

Thank you for noting this, Roman.
c

On Fri, Jul 10, 2015 at 10:55 PM, Roman Yeryomin <leroi.lists at gmail.com> wrote:
> On 10 July 2015 at 05:07, camden lindsay
> <camden.lindsay+openwrt at gmail.com> wrote:
>> I'm sorry, i said ath9k in the subject but the above seems more likely
>> to be ath10k.
>>
>> On Thu, Jul 9, 2015 at 7:03 PM, camden lindsay
>> <camden.lindsay+openwrt at gmail.com> wrote:
>>> Hello-
>>>
>>> Thought I should report this, since there was so much discussion and
>>> confusion on tracker https://dev.openwrt.org/ticket/11862  causing a
>>> lot of work for some folks here.
>>>
>>> ...snip...
>>> ...
>>> [2060235.460000] ath: phy1: Failed to stop TX DMA, queues=0x002!
>>> [2060265.460000] ath: phy1: Failed to stop TX DMA, queues=0x002!
>>> [2061047.180000] ath: phy1: Failed to stop TX DMA, queues=0x002!
>>> [2104015.840000] ath: phy1: Unable to reset channel, reset status -5
>>> [2145012.920000] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0,
>>> skipped old beacon
>>> [2145013.030000] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0,
>>> skipped old beacon
>
> It was fixed in trunk (by using newer firmware and driver).
>
> Regards,
> Roman
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel