[OpenWrt-Devel] [PATCH] ar71xx: add support for D-Link DIR-615 rev. Ix board
Jaehoon You
teslamint at gmail.com
Tue Jul 7 09:18:19 EDT 2015
Hi, John.
No problem. I will send new patch soon.
-Jaehoon
Jaehoon You
http://about.me/jhyou
2015-07-07 20:54 GMT+09:00 John Crispin <blogic at openwrt.org>:
> Hi,
>
> sorry patch no longer applies. could you rebase it and then send it
> again please ?
>
> John
>
> On 18/04/2015 06:52, Jaehoon You wrote:
>> Signed-off-by: Jaehoon You <teslamint at gmail.com>
>> ---
>> target/linux/ar71xx/base-files/etc/diag.sh | 1 +
>> .../ar71xx/base-files/etc/uci-defaults/01_leds | 8 ++
>> .../ar71xx/base-files/etc/uci-defaults/02_network | 0
>> target/linux/ar71xx/base-files/lib/ar71xx.sh | 3 +
>> .../base-files/lib/preinit/05_set_iface_mac_ar71xx | 3 +
>> .../ar71xx/base-files/lib/upgrade/platform.sh | 1 +
>> target/linux/ar71xx/config-3.18 | 1 +
>> .../ar71xx/files/arch/mips/ath79/mach-dir-615-i1.c | 141 +++++++++++++++++++++
>> target/linux/ar71xx/generic/profiles/d-link.mk | 10 ++
>> target/linux/ar71xx/image/Makefile | 9 ++
>> .../610-MIPS-ath79-openwrt-machines.patch | 25 +++-
>> 11 files changed, 196 insertions(+), 6 deletions(-)
>> mode change 100644 => 100755 target/linux/ar71xx/base-files/etc/uci-defaults/02_network
>> create mode 100644 target/linux/ar71xx/files/arch/mips/ath79/mach-dir-615-i1.c
>>
>> diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
>> index 52a73ee..07b1769 100644
>> --- a/target/linux/ar71xx/base-files/etc/diag.sh
>> +++ b/target/linux/ar71xx/base-files/etc/diag.sh
>> @@ -54,6 +54,7 @@ get_status_led() {
>> dir-505-a1 |\
>> dir-600-a1 |\
>> dir-615-e1 |\
>> + dir-615-i1 |\
>> dir-615-e4)
>> status_led="d-link:green:power"
>> ;;
>> diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
>> index 787523a..aff8f1f 100644
>> --- a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
>> +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
>> @@ -139,6 +139,14 @@ dir-825-b1)
>> ucidef_set_led_usbdev "usb" "USB" "d-link:blue:usb" "1-1"
>> ;;
>>
>> +dir-615-i1)
>> + ucidef_set_led_default "power" "POWER" "d-link:green:power" "1"
>> + ucidef_set_led_default "diag" "DIAG" "d-link:amber:power" "0"
>> + ucidef_set_led_default "wps" "WPS" "d-link:blue:wps" "0"
>> + ucidef_set_led_netdev "wan" "WAN" "d-link:green:wan" "eth0"
>> + ucidef_set_led_wlan "wlan" "WLAN" "d-link:green:wlan" "phy0tpt"
>> + ;;
>> +
>> dir-825-c1)
>> ucidef_set_led_usbdev "usb" "USB" "d-link:blue:usb" "1-1"
>> ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "d-link:blue:wlan2g" "phy0tpt"
>> diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
>> old mode 100644
>> new mode 100755
>> diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
>> index b3dbcf5..3e4453d 100755
>> --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
>> +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
>> @@ -398,6 +398,9 @@ ar71xx_board_detect() {
>> *"DIR-615 rev. E4")
>> name="dir-615-e4"
>> ;;
>> + *"DIR-615 rev. I1")
>> + name="dir-615-i1"
>> + ;;
>> *"DIR-825 rev. B1")
>> name="dir-825-b1"
>> ;;
>> diff --git a/target/linux/ar71xx/base-files/lib/preinit/05_set_iface_mac_ar71xx b/target/linux/ar71xx/base-files/lib/preinit/05_set_iface_mac_ar71xx
>> index b40dff5..c39169a 100644
>> --- a/target/linux/ar71xx/base-files/lib/preinit/05_set_iface_mac_ar71xx
>> +++ b/target/linux/ar71xx/base-files/lib/preinit/05_set_iface_mac_ar71xx
>> @@ -29,6 +29,9 @@ preinit_set_mac_address() {
>> fetch_mac_from_mtd config lan_mac wan_mac
>> echo 1 > /sys/class/leds/dir-615-c1:green:wancpu/brightness
>> ;;
>> + dir-615-i1)
>> + fetch_mac_from_mtd nvram sys_lan_mac sys_wan_mac
>> + ;;
>> r6100)
>> mac_lan=$(mtd_get_mac_binary caldata 0)
>> [ -n "$mac_lan" ] && ifconfig eth1 hw ether "$mac_lan"
>> diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
>> index 0cbee1d..4899f78 100755
>> --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
>> +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
>> @@ -203,6 +203,7 @@ platform_check_image() {
>> dir-615-c1 | \
>> dir-615-e1 | \
>> dir-615-e4 | \
>> + dir-615-i1 | \
>> dir-825-c1 | \
>> dir-835-a1 | \
>> dragino2 | \
>> diff --git a/target/linux/ar71xx/config-3.18 b/target/linux/ar71xx/config-3.18
>> index 1ee99f4..6374c54 100644
>> --- a/target/linux/ar71xx/config-3.18
>> +++ b/target/linux/ar71xx/config-3.18
>> @@ -50,6 +50,7 @@ CONFIG_ATH79_MACH_DHP_1565_A1=y
>> CONFIG_ATH79_MACH_DIR_505_A1=y
>> CONFIG_ATH79_MACH_DIR_600_A1=y
>> CONFIG_ATH79_MACH_DIR_615_C1=y
>> +CONFIG_ATH79_MACH_DIR_615_I1=y
>> CONFIG_ATH79_MACH_DIR_825_B1=y
>> CONFIG_ATH79_MACH_DIR_825_C1=y
>> CONFIG_ATH79_MACH_DRAGINO2=y
>> diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-615-i1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-615-i1.c
>> new file mode 100644
>> index 0000000..bae1f05
>> --- /dev/null
>> +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-615-i1.c
>> @@ -0,0 +1,141 @@
>> +/*
>> + * D-Link DIR-615 rev. I1 board support
>> + * Copyright (C) 2013-2015 Jaehoon You <teslamint at gmail.com>
>> + *
>> + * based on the DIR-600 rev. A1 board support code
>> + * Copyright (C) 2010-2012 Gabor Juhos <juhosg at openwrt.org>
>> + * Copyright (C) 2012 Vadim Girlin <vadimgirlin at gmail.com>
>> + *
>> + * based on the TP-LINK TL-WR841N/ND v8/TL-MR3420 v2 board support code
>> + * Copyright (C) 2012 Gabor Juhos <juhosg at openwrt.org>
>> + *
>> + * This program is free software; you can redistribute it and/or modify it
>> + * under the terms of the GNU General Public License version 2 as published
>> + * by the Free Software Foundation.
>> + */
>> +
>> +#include <linux/platform_device.h>
>> +
>> +#include <asm/mach-ath79/ath79.h>
>> +#include <asm/mach-ath79/ar71xx_regs.h>
>> +
>> +#include "common.h"
>> +#include "dev-eth.h"
>> +#include "dev-gpio-buttons.h"
>> +#include "dev-leds-gpio.h"
>> +#include "dev-m25p80.h"
>> +#include "dev-wmac.h"
>> +#include "machtypes.h"
>> +#include "nvram.h"
>> +
>> +#define DIR_615_I1_GPIO_LED_WPS 15
>> +#define DIR_615_I1_GPIO_LED_POWER_AMBER 14
>> +#define DIR_615_I1_GPIO_LED_POWER_GREEN 4
>> +#define DIR_615_I1_GPIO_LED_WAN_AMBER 22
>> +#define DIR_615_I1_GPIO_LED_WAN_GREEN 12
>> +#define DIR_615_I1_GPIO_LED_WLAN_GREEN 13
>> +
>> +#define DIR_615_I1_GPIO_BTN_WPS 16
>> +#define DIR_615_I1_GPIO_BTN_RESET 17
>> +
>> +#define DIR_615_I1_KEYS_POLL_INTERVAL 20 /* msecs */
>> +#define DIR_615_I1_KEYS_DEBOUNCE_INTERVAL (3 * DIR_615_I1_KEYS_POLL_INTERVAL)
>> +
>> +#define DIR_615_I1_NVRAM_ADDR 0x1fff0000
>> +#define DIR_615_I1_NVRAM_SIZE 0x10000
>> +#define DIR_615_I1_LAN_PHYMASK BIT(0)
>> +#define DIR_615_I1_WAN_PHYMASK BIT(4)
>> +#define DIR_615_I1_WLAN_MAC_ADDR 0x1fffffb4
>> +
>> +static struct gpio_led dir_615_i1_leds_gpio[] __initdata = {
>> + {
>> + .name = "d-link:green:power",
>> + .gpio = DIR_615_I1_GPIO_LED_POWER_GREEN,
>> + }, {
>> + .name = "d-link:amber:power",
>> + .gpio = DIR_615_I1_GPIO_LED_POWER_AMBER,
>> + }, {
>> + .name = "d-link:amber:wan",
>> + .gpio = DIR_615_I1_GPIO_LED_WAN_AMBER,
>> + }, {
>> + .name = "d-link:green:wan",
>> + .gpio = DIR_615_I1_GPIO_LED_WAN_GREEN,
>> + .active_low = 1,
>> + }, {
>> + .name = "d-link:green:wlan",
>> + .gpio = DIR_615_I1_GPIO_LED_WLAN_GREEN,
>> + .active_low = 1,
>> + }, {
>> + .name = "d-link:blue:wps",
>> + .gpio = DIR_615_I1_GPIO_LED_WPS,
>> + .active_low = 1,
>> + }
>> +};
>> +
>> +static struct gpio_keys_button dir_615_i1_gpio_keys[] __initdata = {
>> + {
>> + .desc = "reset",
>> + .type = EV_KEY,
>> + .code = KEY_RESTART,
>> + .debounce_interval = DIR_615_I1_KEYS_DEBOUNCE_INTERVAL,
>> + .gpio = DIR_615_I1_GPIO_BTN_RESET,
>> + .active_low = 1,
>> + }, {
>> + .desc = "wps",
>> + .type = EV_KEY,
>> + .code = KEY_WPS_BUTTON,
>> + .debounce_interval = DIR_615_I1_KEYS_DEBOUNCE_INTERVAL,
>> + .gpio = DIR_615_I1_GPIO_BTN_WPS,
>> + .active_low = 1,
>> + }
>> +};
>> +
>> +static void __init dir_615_i1_setup(void)
>> +{
>> + const char *nvram = (char *) KSEG1ADDR(DIR_615_I1_NVRAM_ADDR);
>> + u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
>> + u8 mac[ETH_ALEN], wlan_mac[ETH_ALEN];
>> +
>> + ath79_register_mdio(0, 0x0);
>> + ath79_register_mdio(1, ~(DIR_615_I1_WAN_PHYMASK));
>> +
>> + if (ath79_nvram_parse_mac_addr(nvram, DIR_615_I1_NVRAM_SIZE,
>> + "sys_lan_mac=", mac) == 0) {
>> + ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
>> + ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
>> + }
>> +
>> + /* GMAC0 is connected to the PHY0 of the internal switch */
>> + ath79_switch_data.phy4_mii_en = 1;
>> + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
>> + ath79_eth0_data.phy_mask = DIR_615_I1_WAN_PHYMASK;
>> + ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
>> +
>> + /* GMAC1 is connected to the internal switch */
>> + ath79_eth1_data.phy_mask = DIR_615_I1_LAN_PHYMASK;
>> + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
>> +
>> + ath79_register_eth(0);
>> + ath79_register_eth(1);
>> +
>> + ath79_register_m25p80(NULL);
>> +
>> + /* Disable JTAG, enabling GPIOs 0-3 */
>> + /* Configure OBS4 line, for GPIO 4*/
>> + ath79_gpio_function_setup(AR934X_GPIO_FUNC_JTAG_DISABLE,
>> + AR934X_GPIO_FUNC_CLK_OBS4_EN);
>> +
>> + ath79_register_leds_gpio(-1, ARRAY_SIZE(dir_615_i1_leds_gpio),
>> + dir_615_i1_leds_gpio);
>> +
>> + ath79_register_gpio_keys_polled(-1, DIR_615_I1_KEYS_POLL_INTERVAL,
>> + ARRAY_SIZE(dir_615_i1_gpio_keys),
>> + dir_615_i1_gpio_keys);
>> +
>> + ath79_parse_ascii_mac((char *) KSEG1ADDR(DIR_615_I1_WLAN_MAC_ADDR), wlan_mac);
>> +
>> + ath79_register_wmac(eeprom, wlan_mac);
>> +}
>> +
>> +MIPS_MACHINE(ATH79_MACH_DIR_615_I1, "DIR-615-I1", "D-Link DIR-615 rev. I1",
>> + dir_615_i1_setup);
>> diff --git a/target/linux/ar71xx/generic/profiles/d-link.mk b/target/linux/ar71xx/generic/profiles/d-link.mk
>> index 0909df5..f782a41 100644
>> --- a/target/linux/ar71xx/generic/profiles/d-link.mk
>> +++ b/target/linux/ar71xx/generic/profiles/d-link.mk
>> @@ -93,6 +93,16 @@ endef
>>
>> $(eval $(call Profile,DIR615E4))
>>
>> +define Profile/DIR615IX
>> + NAME:=D-Link DIR-615 rev. I1
>> + PACKAGES:=
>> +endef
>> +
>> +define Profile/DIR615IX/Description
>> + Package set optimized for the D-Link DIR-615 rev. I1.
>> +endef
>> +
>> +$(eval $(call Profile,DIR615IX))
>>
>> define Profile/DIR825B1
>> NAME:=D-Link DIR-825 rev. B1
>> diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile
>> index 8766756..7b4e63b 100644
>> --- a/target/linux/ar71xx/image/Makefile
>> +++ b/target/linux/ar71xx/image/Makefile
>> @@ -451,6 +451,7 @@ cameo_ap91_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,3712k(firmware)
>> cameo_ap99_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,3520k(firmware),64k(mac)ro,192k(lp)ro,64k(art)ro
>> cameo_ap121_mtdlayout=mtdparts=spi0.0:64k(u-boot)ro,64k(art)ro,64k(mac)ro,64k(nvram)ro,192k(language)ro,3648k(firmware)
>> cameo_ap121_mtdlayout_8M=mtdparts=spi0.0:64k(u-boot)ro,64k(art)ro,64k(mac)ro,64k(nvram)ro,256k(language)ro,7680k at 0x80000(firmware)
>> +cameo_ap123_mtdlayout_4M=mtdparts=spi0.0:64k(u-boot)ro,64k(nvram)ro,3712k(firmware),192k(lang)ro,64k(art)ro
>> cameo_db120_mtdlayout=mtdparts=spi0.0:64k(uboot)ro,64k(nvram)ro,15936k(firmware),192k(lang)ro,64k(mac)ro,64k(art)ro
>> cameo_db120_mtdlayout_8M=mtdparts=spi0.0:64k(uboot)ro,64k(nvram)ro,7872k(firmware),128k(lang)ro,64k(art)ro
>> cap4200ag_mtdlayout=mtdparts=spi0.0:256k(u-boot),64k(u-boot-env),320k(custom)ro,1536k(kernel),12096k(rootfs),2048k(failsafe),64k(art),13632k at 0xa0000(firmware)
>> @@ -627,6 +628,10 @@ Image/Build/CameoAP99/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap99_mtd
>> Image/Build/CameoAP99=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_ap99_mtdlayout),$(4),65536)
>> Image/Build/CameoAP99/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap99_mtdlayout))
>>
>> +Image/Build/CameoAP123_4M/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap123_mtdlayout_4M))
>> +Image/Build/CameoAP123_4M=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_ap123_mtdlayout_4M),$(4),26)
>> +Image/Build/CameoAP123_4M/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap123_mtdlayout_4M))
>> +
>> Image/Build/CameoAP135/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
>> Image/Build/CameoAP135=$(call Image/Build/Cameo,$(1),$(2),$(3),$(4),$(5),26)
>> Image/Build/CameoAP135/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
>> @@ -1359,6 +1364,9 @@ $(eval $(call SingleProfile,CameoAP91,64kraw,FR54RTR,fr-54rtr,DIR-600-A1,ttyS0,1
>> $(eval $(call SingleProfile,CameoAP99,64kraw,DIR615E1,dir-615-e1,DIR-615-E1,ttyS0,115200,"AP93-AR7240-RT-081028-00"))
>> $(eval $(call SingleProfile,CameoAP99,64kraw,DIR615E4,dir-615-e4,DIR-615-E4,ttyS0,115200,"AP99-AR7240-RT-091105-05"))
>>
>> +$(eval $(call SingleProfile,CameoAP123_4M,64kraw,DIR615I1,dir-615-i1,DIR-615-I1,ttyS0,115200,"00DB120AR9341-RT-1012I1-00"))
>> +$(eval $(call SingleProfile,CameoAP123_4M,64kraw,DIR615I3,dir-615-i3,DIR-615-I1,ttyS0,115200,"00DB120AR9341-RT-101214-00"))
>> +
>> $(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,A02RBW300N,a02-rb-w300n,TEW-632BRP,ttyS0,115200,"AP81-AR9130-RT-070614-03"))
>> $(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,DIR615C1,dir-615-c1,DIR-615-C1,ttyS0,115200,"AP81-AR9130-RT-070614-02"))
>> $(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,TEW632BRP,tew-632brp,TEW-632BRP,ttyS0,115200,"AP81-AR9130-RT-070614-00"))
>> @@ -1545,6 +1553,7 @@ $(eval $(call SingleProfile,Zcomax,64k,ZCN1523H516,zcn-1523h-5-16,ZCN-1523H-5,tt
>> $(eval $(call SingleProfile,ZyXEL,64k,NBG_460N_550N_550NH,nbg460n_550n_550nh,NBG460N,ttyS0,115200,NBG-460N))
>>
>> $(eval $(call MultiProfile,AP121,AP121_2M AP121_4M))
>> +$(eval $(call MultiProfile,DIR615IX,DIR615I1 DIR615I3))
>> $(eval $(call MultiProfile,AP136,AP136_010 AP136_020))
>> $(eval $(call MultiProfile,ARCHERC7, ARCHERC5 ARCHERC7V1 ARCHERC7V2))
>> $(eval $(call MultiProfile,EWDORIN, EWDORINAP EWDORINRT EWDORIN16M))
>> diff --git a/target/linux/ar71xx/patches-3.18/610-MIPS-ath79-openwrt-machines.patch b/target/linux/ar71xx/patches-3.18/610-MIPS-ath79-openwrt-machines.patch
>> index 2aca064..5a8d132 100644
>> --- a/target/linux/ar71xx/patches-3.18/610-MIPS-ath79-openwrt-machines.patch
>> +++ b/target/linux/ar71xx/patches-3.18/610-MIPS-ath79-openwrt-machines.patch
>> @@ -1,6 +1,6 @@
>> --- a/arch/mips/ath79/machtypes.h
>> +++ b/arch/mips/ath79/machtypes.h
>> -@@ -16,22 +16,190 @@
>> +@@ -16,22 +16,191 @@
>>
>> enum ath79_mach_type {
>> ATH79_MACH_GENERIC = 0,
>> @@ -35,6 +35,7 @@
>> + ATH79_MACH_DIR_615_C1, /* D-Link DIR-615 rev. C1 */
>> + ATH79_MACH_DIR_615_E1, /* D-Link DIR-615 rev. E1 */
>> + ATH79_MACH_DIR_615_E4, /* D-Link DIR-615 rev. E4 */
>> ++ ATH79_MACH_DIR_615_I1, /* D-Link DIR-615 rev. I1 */
>> + ATH79_MACH_DIR_825_B1, /* D-Link DIR-825 rev. B1 */
>> + ATH79_MACH_DIR_825_C1, /* D-Link DIR-825 rev. C1 */
>> + ATH79_MACH_DIR_835_A1, /* D-Link DIR-835 rev. A1 */
>> @@ -264,7 +265,7 @@
>> config ATH79_MACH_AP121
>> bool "Atheros AP121 reference board"
>> select SOC_AR933X
>> -@@ -11,62 +75,976 @@ config ATH79_MACH_AP121
>> +@@ -11,62 +75,987 @@ config ATH79_MACH_AP121
>> select ATH79_DEV_M25P80
>> select ATH79_DEV_USB
>> select ATH79_DEV_WMAC
>> @@ -560,6 +561,17 @@
>> + select ATH79_DEV_WMAC
>> + select ATH79_NVRAM
>> +
>> ++config ATH79_MACH_DIR_615_I1
>> ++ bool "D-Link DIR-615 rev. I1 support"
>> ++ select SOC_AR934X
>> ++ select ATH79_DEV_AP9X_PCI if PCI
>> ++ select ATH79_DEV_ETH
>> ++ select ATH79_DEV_GPIO_BUTTONS
>> ++ select ATH79_DEV_LEDS_GPIO
>> ++ select ATH79_DEV_M25P80
>> ++ select ATH79_DEV_WMAC
>> ++ select ATH79_NVRAM
>> ++
>> +config ATH79_MACH_DIR_825_B1
>> + bool "D-Link DIR-825 rev. B1 board support"
>> + select SOC_AR71XX
>> @@ -1269,7 +1281,7 @@
>>
>> config ATH79_MACH_UBNT_XM
>> bool "Ubiquiti Networks XM/UniFi boards"
>> -@@ -83,6 +1061,97 @@ config ATH79_MACH_UBNT_XM
>> +@@ -83,6 +1072,97 @@ config ATH79_MACH_UBNT_XM
>> Say 'Y' here if you want your kernel to support the
>> Ubiquiti Networks XM (rev 1.0) board.
>>
>> @@ -1367,7 +1379,7 @@
>> endmenu
>>
>> config SOC_AR71XX
>> -@@ -124,7 +1193,10 @@ config ATH79_DEV_DSA
>> +@@ -124,7 +1204,10 @@ config ATH79_DEV_DSA
>> config ATH79_DEV_ETH
>> def_bool n
>>
>> @@ -1379,7 +1391,7 @@
>> def_bool n
>>
>> config ATH79_DEV_GPIO_BUTTONS
>> -@@ -154,6 +1226,11 @@ config ATH79_PCI_ATH9K_FIXUP
>> +@@ -154,6 +1237,11 @@ config ATH79_PCI_ATH9K_FIXUP
>> def_bool n
>>
>> config ATH79_ROUTERBOOT
>> @@ -1393,7 +1405,7 @@
>> endif
>> --- a/arch/mips/ath79/Makefile
>> +++ b/arch/mips/ath79/Makefile
>> -@@ -38,9 +38,119 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route
>> +@@ -38,9 +38,120 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route
>> #
>> # Machines
>> #
>> @@ -1419,6 +1431,7 @@
>> +obj-$(CONFIG_ATH79_MACH_DIR_505_A1) += mach-dir-505-a1.o
>> +obj-$(CONFIG_ATH79_MACH_DIR_600_A1) += mach-dir-600-a1.o
>> +obj-$(CONFIG_ATH79_MACH_DIR_615_C1) += mach-dir-615-c1.o
>> ++obj-$(CONFIG_ATH79_MACH_DIR_615_I1) += mach-dir-615-i1.o
>> +obj-$(CONFIG_ATH79_MACH_DIR_825_B1) += mach-dir-825-b1.o
>> +obj-$(CONFIG_ATH79_MACH_DIR_825_C1) += mach-dir-825-c1.o
>> +obj-$(CONFIG_ATH79_MACH_DRAGINO2) += mach-dragino2.o
>>
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list