[OpenWrt-Devel] Build errors when activating the Device Tree flag for Raspberry Pi

John Crispin blogic at openwrt.org
Tue Jul 14 11:07:25 EDT 2015



On 14/07/2015 17:05, Bruno Randolf wrote:
> On 07/14/2015 03:34 PM, John Crispin wrote:
>>
>>
>> On 14/07/2015 14:41, Bruno Randolf wrote:
>>> On 07/14/2015 12:43 PM, Jernej Izak wrote:
>>>> ifneq (y,)
>>>>
>>>> bash: -c: line 0: syntax error near unexpected token `y,'
>>>>
>>>> bash: -c: line 0: `ifneq (y,)'
>>>
>>> That looks like being caused by my "brcm2708: Implement sysupgrade"
>>> (commit 49f8801514837980bd80dd3fa1c24e82897d2e5c)... I tested it but
>>> blogic committed a slightly different version which seems to be broken.
>>> I'm checking it now...
>>>
>>> bruno
>>
>> i used the version in patchwork, was that not the one to use ?
> 
> Yes. I'm not blaming you and I'm not exactly sure what happened, but I
> think the image generation process has been changed in the mean time.
> E.g. my patch (and the one in patchwork
> http://patchwork.ozlabs.org/patch/494584/) had the "mcopy" lines before
> ./gen_rpi_sdcard_img.sh and the one you applied has them in a different
> target. Also now the image is generated in
> target-arm_cortex-a7+vfp_musl-1.1.10_eabi/linux-brcm2708_bcm2709/tmp/
> and before directly in bin/brcm2708/...
> 
> Something must have changed in the way the target is evaluated so that
> "ifneq" is interpreted as a shell command. And also there are other
> places now where the .gz ending would have to be handled.
> 
> bruno
> 

its not about blaming but about figuring out what went wrong. i will be
on the laptop that i used for merging in abotu an hour and will see int
he logs which commands i called and which patch i applied exactly
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel



More information about the openwrt-devel mailing list