[OpenWrt-Devel] Chaos Calmer 15.05-rc3

[Sebastian Moeller]

Hi,

great news the RC3 announcement.

thanks a lot.

On Jul 16, 2015, at 17:11 , ql li <gxfclql at gmail.com> wrote:

> AQM inflexible, overly complex set

	Could you elaborate a bit? Which AQM system do you find inflexible, qos-scripts or sqm-scripts?
Complex to set up, I wonder? Both systems have a luci GUI in which all you need to do is fill in two numbers (Download and upload speed) and check one box and in sqm you also need to select the interface on which to establish AQM (then press save & apply) I wonder how it could be simpler? All the other options are basically optional and help to deal with the fact that reality is complex ;)

Best Regards
	M.

> 
> 2015-07-16 23:02 GMT+08:00 Yousong Zhou <yszhou4tech at gmail.com>:
>> 
>> On Jul 16, 2015 10:40 PM, "Steven Barth" <cyrus at openwrt.org> wrote:
>>> 
>>> The OpenWrt developers are proud to announce the third release candidate
>>> of OpenWrt Chaos Calmer.
>>> 
>> 
>> Thanks, guys.
>> 
>> regards
>> 
>>                yousong
>> 
>>>   _______                     ________        __
>>> |       |.-----.-----.-----.|  |  |  |.----.|  |_
>>> |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
>>> |_______||   __|_____|__|__||________||__|  |____|
>>>          |__| W I R E L E S S   F R E E D O M
>>> -----------------------------------------------------
>>> CHAOS CALMER (15.05 RC3)
>>> -----------------------------------------------------
>>>  * 1 1/2 oz Gin            Shake with a glassful
>>>  * 1/4 oz Triple Sec       of broken ice and pour
>>>  * 3/4 oz Lime Juice       unstrained into a goblet.
>>>  * 1 1/2 oz Orange Juice
>>>  * 1 tsp. Grenadine Syrup
>>> -----------------------------------------------------
>>> 
>>> -----------------------------------------------------
>>> http://downloads.openwrt.org/chaos_calmer/15.05-rc3/
>>> 
>>> ** Improvements since RC 2 **
>>> * brcmfmac: support for BCM43602
>>> * mt76: updated version with new firmware support, TX & DMA fixes
>>> * Updated 3.18 to 3.18.18
>>> * Fixed image builder generation
>>> * Various security updates (e.g. openssl, curl)
>>> * Minor fixes
>>> 
>>> ** Improvements since RC 1 **
>>> * Fixed broken ImageBuilders for most targets
>>> * Updated 3.18 to 3.18.14
>>> * Fixed broken IPv6 downstream DHCPv6-PD and onlink-route handling
>>> * Images (special format) for Asus brcm47xx and bcm53xx devices
>>> * Improved stability of sysupgrade on brcm47xx and bcm53xx
>>> * Added HTTPS enforcement option to uhttpd
>>> * Fixed umask issue
>>> * Added support for a few new boards
>>> 
>>> 
>>> ** Highlights since Barrier Breaker **
>>> 
>>> * Linux kernel updated to version 3.18
>>> * Improved Security Features
>>>    - Rewritten package signing architecture based on ed25519
>>>    - Added support for jails
>>>    - Added support for hardened builds
>>> * Improved Networking Support
>>>    - Added or improved support for lots of 3G/4G modems (MBIM, QMI, NCM,
>>> ...)
>>>    - Added support for 464XLAT (CLAT) [RFC 6877 + RFC 7050]
>>>    - Netfilter performance enhancements (conntrack route cache)
>>>    - Improved support for self-managing networks
>>> [draft-ietf-homenet-hncp]
>>>    - Better multi-core support for the network stack
>>>    - Improved support for MAP-E, MAP-T and LW4over6 IPv4 transitioning
>>> technologies
>>>        [draft-ietf-softwire-map, -map-t, -map-dhcp, -lw4over6]
>>>    - Improved network auto-setup capable of detecting and bootstrapping
>>> IPv4-only,
>>>      6rd, Dual-Stack, IPv6-only, DS-Lite, LW4over6, MAP-E, MAP-T, 464XLAT
>>>      and combinations without explicit configuration [based on RFC 7084]
>>>    - Added support for Smart Queue Management (SQM) QoS, AQM and Traffic
>>> Shaping
>>>    - Improved support for DNSSEC
>>> * Platform and Driver Support
>>>    - Added support for feeds of externally maintained targets
>>>    - New mt7621 subtarget for Mediatek 11ac SoC
>>>    - New mt76 mac80211 based wifi driver for MTK 11ac cores.
>>>    - New mwlwifi mac80211 based wifi driver for the Marvell 88W8864
>>>    - New bcm53xx target for Broadcom ARM BCM47xx/53xx devices
>>>    - New mxs target for Freescale i.MX23/28 family and various boards
>>>    - New sunxi target for AllWinner A10/A13/A20 family and various boards
>>>    - brcm2708: support for Raspberry Pi 2
>>>    - brcm63xx: support for BCM6318 and BCM63268 family
>>>    - brcm63xx: improved fallback sprom support with bcma support
>>>    - New ipq806x target for QCA IPQ806x SoC family
>>> 
>>> * Known Issues
>>>    - KALLSYMS is active causing some devices to fail
>>> 
>>> And lots and lots of other advancements...
>>> As always a big thank you goes to all our active package maintainers,
>>> testers, supporters and documenters.
>>> 
>>> 
>>> Have fun!
>>>    The OpenWrt developer team
>>> _______________________________________________
>>> openwrt-devel mailing list
>>> openwrt-devel at lists.openwrt.org
>>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>> 
>> 
>> _______________________________________________
>> openwrt-devel mailing list
>> openwrt-devel at lists.openwrt.org
>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>> 
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel