[OpenWrt-Devel] Archer C7 CC 15.05-rc1 Ath9K phy1: Failed to stop TX DMA, queues=0x002!

[Roman Yeryomin]

On 10 July 2015 at 05:07, camden lindsay
<camden.lindsay+openwrt at gmail.com> wrote:
> I'm sorry, i said ath9k in the subject but the above seems more likely
> to be ath10k.
>
> On Thu, Jul 9, 2015 at 7:03 PM, camden lindsay
> <camden.lindsay+openwrt at gmail.com> wrote:
>> Hello-
>>
>> Thought I should report this, since there was so much discussion and
>> confusion on tracker https://dev.openwrt.org/ticket/11862  causing a
>> lot of work for some folks here.
>>
>> ...snip...
>> ...
>> [2060235.460000] ath: phy1: Failed to stop TX DMA, queues=0x002!
>> [2060265.460000] ath: phy1: Failed to stop TX DMA, queues=0x002!
>> [2061047.180000] ath: phy1: Failed to stop TX DMA, queues=0x002!
>> [2104015.840000] ath: phy1: Unable to reset channel, reset status -5
>> [2145012.920000] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0,
>> skipped old beacon
>> [2145013.030000] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0,
>> skipped old beacon

It was fixed in trunk (by using newer firmware and driver).

Regards,
Roman
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel