October 2015 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Thu Oct 1 05:41:01 EDT 2015
Ending: Sat Oct 31 20:29:18 EDT 2015
Messages: 650

• [OpenWrt-Devel] [PATCH] package: libs: libnl: fix include installation directory   Paul Fertser
• [OpenWrt-Devel] [PATCH] dnsmasq: remove dnssec timecheck enable on SIGHUP   Kevin Darbyshire-Bryant
• [OpenWrt-Devel] [PATCH] toolchain/uClibc: add support of uClibc-ng   Felix Fietkau
• [OpenWrt-Devel] [PATCH] dnsmasq: remove dnssec timecheck enable on SIGHUP   Etienne Champetier
• [OpenWrt-Devel] [PATCH] dnsmasq: remove dnssec timecheck enable on SIGHUP   Kevin Darbyshire-Bryant
• [OpenWrt-Devel] [PATCH] dnsmasq: remove dnssec timecheck enable on SIGHUP   Etienne Champetier
• [OpenWrt-Devel] [PATCH] dnsmasq: remove dnssec timecheck enable on SIGHUP   Kevin Darbyshire-Bryant
• [OpenWrt-Devel] [PATCH] dnsmasq: remove dnssec timecheck enable on SIGHUP   Toke Høiland-Jørgensen
• [OpenWrt-Devel] [PATCH] CC-x86: add support for LEDs on PCEngines APU   Ben Pfountz
• [OpenWrt-Devel] [PATCH] dnsmasq: remove dnssec timecheck enable on SIGHUP   Kevin Darbyshire-Bryant
• [OpenWrt-Devel] [PATCH] dnsmasq: remove dnssec timecheck enable on SIGHUP   Toke Høiland-Jørgensen
• [OpenWrt-Devel] [PATCH] package: libs: libnl: fix include installation directory   Rick Farina
• [OpenWrt-Devel] [PATCH][RESEND] libnl: split libnl into smaller libraries   Rick Farina
• [OpenWrt-Devel] [PATCH firewall] zones : Redirect incoming WAN traffic only when the destination IP address matches the IP masquerading address   Hans Dedecker
• [OpenWrt-Devel] [PATCH][RESEND] libnl: split libnl into smaller libraries   Alexandru Ardelean
• [OpenWrt-Devel] [PATCH] collectd: disable perl bindings from dev host   Tim Harvey
• [OpenWrt-Devel] [PATCH] libnl: Install include files into libnl3   Bruno Randolf
• [OpenWrt-Devel] package sha256sum mismatch   Nerijus Baliunas
• [OpenWrt-Devel] [PATCH firewall] zones : Redirect incoming WAN traffic only when the destination IP address matches the IP masquerading address   Jo-Philipp Wich
• [OpenWrt-Devel] [PATCH 1/4] brcm2708: fix kmod-sound-soc-bcm2708-i2s config   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 2/4] brcm2708: switch device tree compilation to linux   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 3/4] brcm2708: add support for device tree overlays   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 4/4] brcm2708: keep boot partition mounted to allow users to change config.txt   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH v2] base-files: init/sysfixtime - exclude dnsmasq.time   Toke Høiland-Jørgensen
• [OpenWrt-Devel] [PATCH v2 1/3] ramips: Add DTS files for HiWiFi HC5x61 models   Piotr Dymacz
• [OpenWrt-Devel] [PATCH 1/2] uhttpd: use separate ustream for chunked transfer encoding   Andrej Krpic
• [OpenWrt-Devel] [PATCH 2/2] uhttpd: add support for gzipped content encoding   Andrej Krpic
• [OpenWrt-Devel] [PATCH] libnl: Install include files into libnl3   Paul Fertser
• [OpenWrt-Devel] [PATCH] openvpn: add handling for route-pre-down option   Jeffery To
• [OpenWrt-Devel] [PATCH] Support broadcast sockets in usock   javierdo1 at gmail.com
• [OpenWrt-Devel] [PATCH] Support broadcast sockets in usock   John Crispin
• [OpenWrt-Devel] [PATCH v2 1/3] ramips: Add DTS files for HiWiFi HC5x61 models   康
• [OpenWrt-Devel] [PATCH libubox v2] Support broadcast sockets in usock   Javier Domingo Cansino
• [OpenWrt-Devel] [PATCH v2 1/3] ramips: Add DTS files for HiWiFi HC5x61 models   Yousong Zhou
• [OpenWrt-Devel] [PATCH v2 1/3] ramips: Add DTS files for HiWiFi HC5x61 models   Piotr Dymacz
• [OpenWrt-Devel] [PATCH 1/2] lantiq: fix ath_pci_fixup hang on bridged devices   Mathias Kresin
• [OpenWrt-Devel] [PATCH 2/2] lantiq: Add target TP-Link TD-W8980   Mathias Kresin
• [OpenWrt-Devel] [PATCH] target: ar71xx: add support for Comfast CF-WR600N, CF-E325N and CF-E316Nv2   Gustavo Azambuja
• [OpenWrt-Devel] [PATCH] [ar71xx] Send power to USB port on WNR2200   Riley Baird
• [OpenWrt-Devel] [PATCH] target: ar71xx: add support for Comfast CF-WR600N, CF-E325N and CF-E316Nv2   Paul Fertser
• [OpenWrt-Devel] [PATCH] target: ar71xx: add support for Comfast CF-WR600N, CF-E325N and CF-E316Nv2   Paul Fertser
• [OpenWrt-Devel] [PATCH] libnl: split into smaller libraries   Baptiste Jonglez
• [OpenWrt-Devel] openwrt-devel Digest, Vol 118, Issue 11   hackru
• [PATCH] Add Comfast compatibility   Gustavo
• [OpenWrt-Devel] [PATCH] target: ar71xx: add support for Comfast CF-WR600N, CF-E325N and CF-E316Nv2   Gustavo Azambuja
• [OpenWrt-Devel] openwrt-devel Digest, Vol 118, Issue 11   Piotr Dymacz
• [OpenWrt-Devel] [PATCH] [ar71xx] Send power to USB port on WNR2200   Felix Fietkau
• [OpenWrt-Devel] [PATCH v3] lantiq: get more status information from xDSL   Jo-Philipp Wich
• [OpenWrt-Devel] [PATCH v2 1/3] ramips: Add DTS files for HiWiFi HC5x61 models   康
• [OpenWrt-Devel] [PATCH v3] lantiq: get more status information from xDSL   Florian Eckert
• [OpenWrt-Devel] [PATCH] [ar71xx] Send power to USB port on WNR2200   Riley Baird
• [OpenWrt-Devel] [PATCH] [ar71xx] Send power to USB port on WNR2200   Felix Fietkau
• [OpenWrt-Devel] [PATCH] [ar71xx] Send power to USB port on WNR2200   Riley Baird
• [OpenWrt-Devel] [PATCH] kernel: update 4.1 to 4.1.9   Mathias Kresin
• [OpenWrt-Devel] [PATCH] libnl: Fix URL   Baptiste Jonglez
• [OpenWrt-Devel] [PATCH] libnl: split into smaller libraries   Baptiste Jonglez
• [OpenWrt-Devel] [RFC] libubox/binary.h design proposal   Javier Domingo Cansino
• [OpenWrt-Devel] [PATCH] lantiq: Change the data-type of mac address in ETOP driver   Martin Blumenstingl
• [OpenWrt-Devel] [RFC] libubox/binary.h design proposal   Etienne Champetier
• [OpenWrt-Devel] [RFC] libubox/binary.h design proposal   Javier Domingo Cansino
• [OpenWrt-Devel] [PATCH firewall] zones : Redirect incoming WAN traffic only when the destination IP address matches the IP masquerading address   Alin Năstac
• [OpenWrt-Devel] [PATCH procd v3 0/7] jail work   John Crispin
• [OpenWrt-Devel] [PATCH] [SIGNED-OFF] Correct WeIO board name   John Crispin
• [OpenWrt-Devel] [RFC] libubox/binary.h design proposal   Javier Domingo Cansino
• [OpenWrt-Devel] [RFC] libubox/binary.h design proposal   Javier Domingo Cansino
• [OpenWrt-Devel] Package build dependencies   Jos Vos
• [OpenWrt-Devel] [PATCH 2/4] ramips: Fix setting of rx buffer length   John Crispin
• [OpenWrt-Devel] [PATCH] scripts/checkpatch.pl: Fix deprecation warnings   Javier Domingo Cansino
• [OpenWrt-Devel] [PATCH 5/7] ramips: fix mt7621 cpu clock speed. set spi clock to system clock   John Crispin
• [OpenWrt-Devel] [PATCH 2/2] packages: Remove dependencies to kmod-ipv6   John Crispin
• [OpenWrt-Devel] [PATCH 5/7] ramips: fix mt7621 cpu clock speed. set spi clock to system clock   Mingyu Li
• [OpenWrt-Devel] [OpenWrt-Devel, 3/7] ramips: fix rx buffer length   Sven Eckelmann
• [OpenWrt-Devel] [PATCH 5/7] ramips: fix mt7621 cpu clock speed. set spi clock to system clock   John Crispin
• [OpenWrt-Devel] [OpenWrt-Devel, 3/7] ramips: fix rx buffer length   Sven Eckelmann
• [OpenWrt-Devel] [PATCH 2/2] packages: Remove dependencies to kmod-ipv6   Arjen de Korte
• [OpenWrt-Devel] [PATCH procd v3 0/7] jail work   Etienne Champetier
• [OpenWrt-Devel] [PATCH] 8139cp fixes   David Woodhouse
• [OpenWrt-Devel] [PATCH] 8139cp fixes   David Woodhouse
• [OpenWrt-Devel] [PATCH] 8139cp fixes   David Woodhouse
• [OpenWrt-Devel] [PATCH] 8139cp fixes   Felix Fietkau
• [OpenWrt-Devel] [PATCH] generic: add 8139cp fixes, enable hardware csum/tso on 4.0+   David Woodhouse
• [OpenWrt-Devel] [PATCH CC] generic: add 8139cp fixes from 4.3   David Woodhouse
• [OpenWrt-Devel] [PATCH] brcm2708: all sound overlays require i2c to work   Álvaro Fernández Rojas
• [OpenWrt-Devel] the cerowrt project's letter to the fcc about the wifi lockdown is nearly final   Dave Taht
• [OpenWrt-Devel] Weird problem with WLAN on RT3662F+RT5392L and iwinfo crash   Piotr Dymacz
• [OpenWrt-Devel] [PATCH firewall] zones : Redirect incoming WAN traffic only when the destination IP address matches the IP masquerading address   Hans Dedecker
• [OpenWrt-Devel] [PATCH] Hostapd: wait longer for inactive client probe (empty data frame)   Dmitry Ivanov
• [OpenWrt-Devel] [PATCH] Hostapd: wait longer for inactive client probe (empty data frame)   Felix Fietkau
• [OpenWrt-Devel] the cerowrt project's letter to the fcc about the wifi lockdown is nearly final   Linus Lüssing
• [OpenWrt-Devel] [PATCH v4 1/3] ramips: Add DTS files for HiWiFi HC5x61 models   Comman Kang
• [OpenWrt-Devel] [Battlemesh] the cerowrt project's letter to the fcc about the wifi lockdown is nearly final   Linus Lüssing
• [OpenWrt-Devel] [PATCH] comgt-ncm: Add possibility to choose PDP context type   Andreas Fritiofson
• [OpenWrt-Devel] [PATCH] kobs-ng: Fix build for musl   Pushpal Sidhu
• [OpenWrt-Devel] [PATCH] comgt-ncm: Add possibility to choose PDP context type   Lars Melin
• [OpenWrt-Devel] [PATCH] comgt-ncm: Add possibility to choose PDP context type   Sami Olmari
• [OpenWrt-Devel] [PATCH] lantiq: bugfix luci lantiq_dsl status   Florian Eckert
• [OpenWrt-Devel] uhttpd: chunked output from cgi script   Luigi Tarenga
• [OpenWrt-Devel] [PATCH][ar71xx] add support for tp-link wr841n v10 image generation   Daniel Petre
• [OpenWrt-Devel] uhttpd: chunked output from cgi script   Jo-Philipp Wich
• [OpenWrt-Devel] Jails current broken due to not following symlinks   Daniel Dickinson
• [OpenWrt-Devel] Jails current broken due to not following symlinks   Daniel Dickinson
• [OpenWrt-Devel] Jails current broken due to not following symlinks   John Crispin
• [OpenWrt-Devel] [PATCH procd v3 0/7] jail work   Etienne Champetier
• [OpenWrt-Devel] Jails current broken due to not following symlinks   Daniel Dickinson
• [OpenWrt-Devel] [PATCH] generic: add 8139cp fixes, enable hardware csum/tso on 4.0+   John Crispin
• [OpenWrt-Devel] [PATCH] generic: add 8139cp fixes, enable hardware csum/tso on 4.0+   John Crispin
• [OpenWrt-Devel] [PATCH] CC-x86: add support for LEDs on PCEngines APU   John Crispin
• [OpenWrt-Devel] uhttpd: chunked output from cgi script   Luigi Tarenga
• [OpenWrt-Devel] [PATCH] rb532: prepare switch to 4.1   Roman Yeryomin
• [OpenWrt-Devel] uhttpd: chunked output from cgi script   Luigi Tarenga
• [OpenWrt-Devel] uhttpd: chunked output from cgi script   Jo-Philipp Wich
• [OpenWrt-Devel] [PATCH 1/8] ramips: add rt2880/mt7620 spi register defines   Michael Lee
• [OpenWrt-Devel] [PATCH 2/8] ramips: remove rt2880 spi lock and clean bit operation   Michael Lee
• [OpenWrt-Devel] [PATCH 3/8] ramips: improve rt2880 spi wait ready function   Michael Lee
• [OpenWrt-Devel] [PATCH 4/8] ramips: clean up rt2880 spi probe/remove   Michael Lee
• [OpenWrt-Devel] [PATCH 5/8] ramips: improve rt2880 spi setup   Michael Lee
• [OpenWrt-Devel] [PATCH 6/8] ramips: move rt2880 spi clock and reset init code to spi_prepare_message   Michael Lee
• [OpenWrt-Devel] [PATCH 7/8] ramips: use transfer_one instead of transfer_one_message on rt2880 spi   Michael Lee
• [OpenWrt-Devel] [PATCH 8/8] ramips: update dtsi files to support second spi device   Michael Lee
• [OpenWrt-Devel] fstools: block command doesn't recognize supported filesystem types because of libblkid-tiny   Sandy McArthur Jr
• [OpenWrt-Devel] [PATCH 1/2] ramips: rt305x: update kernel config symbols   Piotr Dymacz
• [OpenWrt-Devel] [PATCH 2/2] ramips: rt305x: enable seama mtdsplit parser   Piotr Dymacz
• [OpenWrt-Devel] [PATCH procd] jail: Add MS_NODEV MS_NOEXEC MS_NOSUID mount options where needed   Etienne CHAMPETIER
• [OpenWrt-Devel] Jails current broken due to not following symlinks   Daniel Dickinson
• [OpenWrt-Devel] [PATCH] ar71xx: TP-LINK Archer C5 image name   Cezary Jackiewicz
• [OpenWrt-Devel] [PATCH] base-files: sysupgrade: respect new profile.d infrastructure   Bastian Bittorf
• [OpenWrt-Devel] [PATCH v2] base-files: show hint when JFFS2-partition is full and overlayfs mounted read-only   Bastian Bittorf
• [OpenWrt-Devel] Last call for signatures to the FCC on the wifi lockdown issue   Dave Taht
• [OpenWrt-Devel] [PATCH 0/6] ar71xx/image: migrate tplink images   Alexander Couzens
• [OpenWrt-Devel] [PATCH 1/6] ar71xx/image: remove unused multiprofile definitons   Alexander Couzens
• [OpenWrt-Devel] [PATCH 2/6] ar71xx/image: add options argument to mktplinkfw step   Alexander Couzens
• [OpenWrt-Devel] [PATCH 3/6] ar71xx/image: refactor tplink-chn-v2 devices   Alexander Couzens
• [OpenWrt-Devel] [PATCH 4/6] ar71xx/image: migrate last TPLINK-LZMA images to new build system   Alexander Couzens
• [OpenWrt-Devel] [PATCH 5/6] ar71xx/image: remove old build step TPLINK-LZMA   Alexander Couzens
• [OpenWrt-Devel] [PATCH 6/6] ar71xx/image: migrate all images based on macro TPLINK   Alexander Couzens
• [OpenWrt-Devel] gdbm build failure (gettext version)   Jos Vos
• [OpenWrt-Devel] SVN to GIT transition   Jonathan Bennett
• [OpenWrt-Devel] SVN to GIT transition   Jo-Philipp Wich
• [OpenWrt-Devel] Becoming maintainer of bandwidthd   Jean-Michel Lacroix
• [OpenWrt-Devel] SVN to GIT transition   Jonathan Bennett
• [OpenWrt-Devel] Becoming maintainer of bandwidthd   Lars
• [OpenWrt-Devel] [PATCH] bmips: add new target   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 1/5] brcm63xx: fix BCM3368 external interrupts   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 2/5] brcm63xx: lzma-loader: add BCM3368 support   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 3/5] brcm63xx: lzma-loader: add BCM3380 support   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 4/5] brcm63xx: fix Netgear CVG834G HCS magic bytes   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 5/5] brcm63xx: fix brcm, bcm6345-ext-intc interrupt controller   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH] bmips: add new target   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH] bmips: add new target   Florian Fainelli
• [OpenWrt-Devel] [PATCH 3/5] brcm63xx: lzma-loader: add BCM3380 support   Florian Fainelli
• [OpenWrt-Devel] [PATCH 4/5] brcm63xx: fix Netgear CVG834G HCS magic bytes   Florian Fainelli
• [OpenWrt-Devel] [PATCH] bmips: add new target   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 1/5] brcm63xx: fix BCM3368 external interrupts   Florian Fainelli
• [OpenWrt-Devel] [PATCH 2/5] brcm63xx: lzma-loader: add BCM3368 support   Florian Fainelli
• [OpenWrt-Devel] [PATCH 3/5] brcm63xx: lzma-loader: add BCM3380 support   Álvaro Fernández Rojas
• [OpenWrt-Devel] Add several OpenWrt Packages   Pushpal Sidhu
• [OpenWrt-Devel] [PATCH 1/4] firmware: linux-firmware: Add ibt-firmware and ar3k-firmware packages   Pushpal Sidhu
• [OpenWrt-Devel] [PATCH 2/4] kernel: add ath3k module package   Pushpal Sidhu
• [OpenWrt-Devel] [PATCH 3/4] kernel: add mvsw61xx module package   Pushpal Sidhu
• [OpenWrt-Devel] [PATCH 4/4] kernel: add usb-mass-storage-gadget driver package   Pushpal Sidhu
• [OpenWrt-Devel] SVN to GIT transition   Roman Yeryomin
• [OpenWrt-Devel] [PATCH 2/4] kernel: add ath3k module package   Roman Yeryomin
• [OpenWrt-Devel] [PATCH 2/4] kernel: add ath3k module package   Pushpal Sidhu
• [OpenWrt-Devel] Jails current broken due to not following symlinks   Daniel Dickinson
• [OpenWrt-Devel] [PATCH] [ar71xx] Send power to USB port on WNR2200   Riley Baird
• [OpenWrt-Devel] [PATCH 1/2] mtools: build and install mmd   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 2/2] brcm2708: use mmd for overlays subdirectory   Álvaro Fernández Rojas
• [OpenWrt-Devel] SVN to GIT transition   Steven Barth
• [PATCH 1/2] Add package django-sslserver   Philby John
• [PATCH] Add package django-sslserver   Philby John
• [OpenWrt-Devel] [PATCH v2 1/3] ramips: Add DTS files for HiWiFi HC5x61 models   康
• [OpenWrt-Devel] [PATCH 1/2] Add package django-sslserver   philby john
• [OpenWrt-Devel] [PATCH 2/2] Add package django-secure   philby john
• [OpenWrt-Devel] [PATCH 1/2] Add package django-sslserver   philby john
• [OpenWrt-Devel] [PATCH v2] Add package django-sslserver   philby john
• [OpenWrt-Devel] [PATCH] omap/Beagleboard: remove FEATURES override   Alexander Couzens
• [OpenWrt-Devel] [PATCH] comgt-ncm: Add possibility to choose PDP context type   Matti Laakso
• [OpenWrt-Devel] SVN to GIT transition   nemesis
• [OpenWrt-Devel] SVN to GIT transition   Florian Fainelli
• [OpenWrt-Devel] SVN to GIT transition   Attila Lendvai
• [OpenWrt-Devel] SVN to GIT transition   Bruno Randolf
• [OpenWrt-Devel] [PATCH] lantiq: bugfix wrong non pre-emptive crc errors output   Luca Debernardi
• [OpenWrt-Devel] [PATCH 1/8] ramips: complete mt7621 spi register define   Michael Lee
• [OpenWrt-Devel] [PATCH 2/8] ramips: improve mt7621 spi wait ready function   Michael Lee
• [OpenWrt-Devel] [PATCH 3/8] ramips: clean up mt7621 spi probe/remove   Michael Lee
• [OpenWrt-Devel] [PATCH 4/8] ramips: improve mt7621 spi setup   Michael Lee
• [OpenWrt-Devel] [PATCH 5/8] ramips: move mt7621 spi clock set to spi_prepare_message   Michael Lee
• [OpenWrt-Devel] [PATCH 6/8] ramips: improve mt7621 spi chip select   Michael Lee
• [OpenWrt-Devel] [PATCH 7/8] ramips: use transfer_one instead of transfer_one_message on mt7621 spi   Michael Lee
• [OpenWrt-Devel] [PATCH 8/8] ramips: update dtsi files to set mt7621 spi bus number   Michael Lee
• [OpenWrt-Devel] [PATCH 1/2] Add package django-sslserver   Steven Barth
• [OpenWrt-Devel] [PATCH] lantiq: fix use of IRQF_DISABLED in lantiq kmods   Mathias Kresin
• [OpenWrt-Devel] [PATCH] lantiq: fix use of IRQF_DISABLED in lantiq kmods   Arjen de Korte
• [OpenWrt-Devel] [PATCH] lantiq: fix use of IRQF_DISABLED in lantiq kmods   Mathias Kresin
• [OpenWrt-Devel] SVN to GIT transition   Jan Čermák
• [OpenWrt-Devel] SVN to GIT transition   John Crispin
• [OpenWrt-Devel] [PATCH] [ar71xx] Send power to USB port on WNR2200   John Crispin
• [OpenWrt-Devel] SVN to GIT transition   Emmanuel Deloget
• [OpenWrt-Devel] [PATCH v2] lantiq: fix use of IRQF_DISABLED in lantiq kmods   Mathias Kresin
• [OpenWrt-Devel] [PATCH][ar71xx] add support for tp-link wr841n v10 image generation   John Crispin
• [OpenWrt-Devel] SVN to GIT transition   Joris de Vries
• [OpenWrt-Devel] SVN to GIT transition   Jonathan Bennett
• [OpenWrt-Devel] [PATCH] ar71xx: Bitmain Antminer S1 & S3 cleanup   L. D. Pinney
• [OpenWrt-Devel] SVN to GIT transition   Nemesis
• [OpenWrt-Devel] SVN to GIT transition   L. D. Pinney
• [OpenWrt-Devel] SVN to GIT transition   Jonathan Bennett
• [OpenWrt-Devel] [PATCH][ar71xx] add support for tp-link wr841n v10 image generation   Bastian Bittorf
• [OpenWrt-Devel] [PATCH] base-files: sysupgrade: respect new profile.d infrastructure   Bastian Bittorf
• [OpenWrt-Devel] SVN to GIT transition   Attila Lendvai
• [OpenWrt-Devel] [PATCH] [package] dnsmasq: use host-record instead of address   Julián Landerreche
• [OpenWrt-Devel] [PATCH, v2] ar71xx: Bitmain Antminer S1 & S3 cleanup   L. D. Pinney
• [OpenWrt-Devel] SVN to GIT transition   Florian Fainelli
• [OpenWrt-Devel] SVN to GIT transition   Steven Barth
• [OpenWrt-Devel] SVN to GIT transition   John Crispin
• [OpenWrt-Devel] SVN to GIT transition   James Hilliard
• [OpenWrt-Devel] SVN to GIT transition   Steven Barth
• [OpenWrt-Devel] SVN to GIT transition   Felix Fietkau
• [OpenWrt-Devel] SVN to GIT transition   John Crispin
• [OpenWrt-Devel] SVN to GIT transition   John Crispin
• [OpenWrt-Devel] [PATCH] lldpd: implement a reload hook   Alexandru Ardelean
• [OpenWrt-Devel] SVN to GIT transition   Steven Barth
• [OpenWrt-Devel] SVN to GIT transition   Roman Yeryomin
• [OpenWrt-Devel] SVN to GIT transition   Felix Fietkau
• [OpenWrt-Devel] SVN to GIT transition   Felix Fietkau
• [OpenWrt-Devel] SVN to GIT transition   Nemesis
• [OpenWrt-Devel] SVN to GIT transition   Steven Barth
• [OpenWrt-Devel] SVN to GIT transition   Holger Levsen
• [OpenWrt-Devel] SVN to GIT transition   Roman Yeryomin
• [OpenWrt-Devel] SVN to GIT transition   Felix Fietkau
• [OpenWrt-Devel] [OpenWrt-Tickets] [OpenWrt] #20473: Source lm_sensors-3.3.5.tar.bz2 for lm-sensors not available on mirror2.openwrt.org   Carlos Ferreira
• [OpenWrt-Devel] SVN to GIT transition   Javier Domingo Cansino
• [OpenWrt-Devel] [PATCH v2 1/3] ramips: Add DTS files for HiWiFi HC5x61 models   Yousong Zhou
• [OpenWrt-Devel] SVN to GIT transition   Felix Fietkau
• [OpenWrt-Devel] SVN to GIT transition   Javier Domingo Cansino
• [OpenWrt-Devel] SVN to GIT transition   Felix Fietkau
• [OpenWrt-Devel] SVN to GIT transition   Sergey Ryazanov
• [OpenWrt-Devel] SVN to GIT transition   Javier Domingo Cansino
• [OpenWrt-Devel] SVN to GIT transition   Sergey Ryazanov
• [OpenWrt-Devel] SVN to GIT transition   Bruno Randolf
• [OpenWrt-Devel] SVN to GIT transition   Felix Fietkau
• [OpenWrt-Devel] SVN to GIT transition   Bruno Randolf
• [OpenWrt-Devel] [PATCH procd] cmake: use CMAKE_INSTALL_* variables   Felix Fietkau
• [OpenWrt-Devel] SVN to GIT transition   Roman Yeryomin
• [OpenWrt-Devel] SVN to GIT transition   Javier Domingo Cansino
• [OpenWrt-Devel] SVN to GIT transition   Felix Fietkau
• [OpenWrt-Devel] SVN to GIT transition   Felix Fietkau
• [OpenWrt-Devel] SVN to GIT transition   Javier Domingo Cansino
• [OpenWrt-Devel] SVN to GIT transition   Felix Fietkau
• [OpenWrt-Devel] SVN to GIT transition   Felix Fietkau
• [OpenWrt-Devel] SVN to GIT transition   David Lang
• [OpenWrt-Devel] SVN to GIT transition   Jonathan Bennett
• [OpenWrt-Devel] SVN to GIT transition   Javier Domingo Cansino
• [OpenWrt-Devel] SVN to GIT transition   Javier Domingo Cansino
• [OpenWrt-Devel] SVN to GIT transition   David Lang
• [OpenWrt-Devel] SVN to GIT transition   Felix Fietkau
• [OpenWrt-Devel] SVN to GIT transition   Felix Fietkau
• [OpenWrt-Devel] SVN to GIT transition   David Lang
• [OpenWrt-Devel] SVN to GIT transition   David Lang
• [OpenWrt-Devel] SVN to GIT transition   Michael Büsch
• [OpenWrt-Devel] SVN to GIT transition   Felix Fietkau
• [OpenWrt-Devel] SVN to GIT transition   Javier Domingo Cansino
• [OpenWrt-Devel] SVN to GIT transition   Felix Fietkau
• [OpenWrt-Devel] SVN to GIT transition   David Lang
• [OpenWrt-Devel] SVN to GIT transition   David Lang
• [OpenWrt-Devel] SVN to GIT transition   Felix Fietkau
• [OpenWrt-Devel] SVN to GIT transition   David Lang
• [OpenWrt-Devel] SVN to GIT transition   Javier Domingo Cansino
• [OpenWrt-Devel] SVN to GIT transition   Bruno Randolf
• [OpenWrt-Devel] SVN to GIT transition   Etienne Champetier
• [OpenWrt-Devel] SVN to GIT transition   Felix Fietkau
• [OpenWrt-Devel] [PATCH v2 0/4] Add several OpenWrt Packages   Pushpal Sidhu
• [OpenWrt-Devel] [PATCH v2 1/4] firmware: linux-firmware: Add ibt-firmware and ar3k-firmware packages   Pushpal Sidhu
• [OpenWrt-Devel] [PATCH v2 2/4] kernel: add ath3k module package   Pushpal Sidhu
• [OpenWrt-Devel] [PATCH v2 3/4] kernel: add mvsw61xx module package   Pushpal Sidhu
• [OpenWrt-Devel] [PATCH v2 4/4] kernel: add usb-mass-storage-gadget driver package   Pushpal Sidhu
• [OpenWrt-Devel] proto 'none' overwriting tun interfaces   openwrt at a.gnslr.us
• [OpenWrt-Devel] proto 'none' overwriting tun interfaces   Alexander Couzens
• [OpenWrt-Devel] [PATCH] modules: enable crypto hardware modules   Daniel Golle
• [OpenWrt-Devel] [PATCH] modules: package VIA AC97 modules   Daniel Golle
• [OpenWrt-Devel] [PATCH] x86: add EPIA subtarget   Daniel Golle
• [OpenWrt-Devel] [PATCH] kernel: add some missing symbols for 4.3   Daniel Golle
• [OpenWrt-Devel] [PATCH] kernel: add support for KERNEL_CGROUP_PIDS   Daniel Golle
• [OpenWrt-Devel] [PATCH] modules: crypto-rng changes additions for kernel 4.3   Daniel Golle
• [OpenWrt-Devel] [PATCH 0/5] oxnas: update platform and drivers for kernel 4.3   Daniel Golle
• [OpenWrt-Devel] [PATCH 1/5] oxnas: remove obsolete __cpuinit   Daniel Golle
• [OpenWrt-Devel] [PATCH 2/5] oxnas: fix duplicate include in clk-oxnas   Daniel Golle
• [OpenWrt-Devel] [PATCH 3/5] oxnas: prepare irqchip driver for kernel >=4.2   Daniel Golle
• [OpenWrt-Devel] [PATCH 4/5] oxnas: prepare pinctrl for kernel >=4.2   Daniel Golle
• [OpenWrt-Devel] [PATCH 5/5] oxnas: move gmac soc glue from mach to stmmac driver   Daniel Golle
• [OpenWrt-Devel] SVN to GIT transition   Roman Yeryomin
• [OpenWrt-Devel] SVN to GIT transition   Roman Yeryomin
• [OpenWrt-Devel] SVN to GIT transition   Bruno Randolf
• [OpenWrt-Devel] SVN to GIT transition   Roman Yeryomin
• [OpenWrt-Devel] proto 'none' overwriting tun interfaces   Roman Yeryomin
• [OpenWrt-Devel] [PATCH] musl: add upstream patch for open_[w]memstream   Maxim Storchak
• [OpenWrt-Devel] Did CONFIG_NATIVE_TOOLCHAIN ever work?   Zefir Kurtisi
• [OpenWrt-Devel] SVN to GIT transition / paid patch-checking   Bastian Bittorf
• [OpenWrt-Devel] proto 'none' overwriting tun interfaces   Adam Gensler
• [OpenWrt-Devel] SVN to GIT transition / paid patch-checking   Imre Kaloz
• [OpenWrt-Devel] SVN to GIT transition / paid patch-checking   Sorin Burjan
• [OpenWrt-Devel] SVN to GIT transition / paid patch-checking   Imre Kaloz
• [OpenWrt-Devel] SVN to GIT transition / paid patch-checking   edgar.soldin at web.de
• [OpenWrt-Devel] SVN to GIT transition / paid patch-checking   Nemesis
• [OpenWrt-Devel] [PATCH 3/5] brcm63xx: lzma-loader: add BCM3380 support   José Vázquez
• [OpenWrt-Devel] SVN to GIT transition / paid patch-checking   Emmanuel Deloget
• [OpenWrt-Devel] SVN to GIT transition / paid patch-checking   Daniel Golle
• [OpenWrt-Devel] [PATCH] generic: add 8139cp fixes, enable hardware csum/tso on 4.0+   David Woodhouse
• [OpenWrt-Devel] [PATCH][CC] generic: add 8139cp fixes from 4.3   David Woodhouse
• [OpenWrt-Devel] SVN to GIT transition / paid patch-checking   Bastian Bittorf
• [OpenWrt-Devel] [PATCH] lantiq: Synchronize access to the DSL command pipe   Martin Blumenstingl
• [OpenWrt-Devel] SVN to GIT transition   Etienne Champetier
• [OpenWrt-Devel] Subject: [PATCH] [target] Addition of NixCore X1 Board   Andrew Gaylo
• [OpenWrt-Devel] [PATCH][CC15.05] opkg: backport 'opkg list --size' option   Hannu Nyman
• [OpenWrt-Devel] SVN to GIT transition   David Lang
• [OpenWrt-Devel] [PATCH v2 procd] cmake: use CMAKE_INSTALL_* variables   Sergiy Kibrik
• [OpenWrt-Devel] [PATCH procd] cmake: use CMAKE_INSTALL_* variables   Sergiy Kibrik
• [OpenWrt-Devel] SVN to GIT transition   Roman Yeryomin
• [OpenWrt-Devel] SVN to GIT transition   David Lang
• [OpenWrt-Devel] SVN to GIT transition   Roman Yeryomin
• [OpenWrt-Devel] SVN to GIT transition   Bruno Randolf
• [OpenWrt-Devel] [PATCH 0/3] Bump imx6 to kernel 4.1   Pushpal Sidhu
• [OpenWrt-Devel] [PATCH 1/3] imx6: add v4.1 support   Pushpal Sidhu
• [OpenWrt-Devel] [PATCH 2/3] imx6: add Gateworks GW551x support   Pushpal Sidhu
• [OpenWrt-Devel] [PATCH 3/3] imx6: switch to v4.1   Pushpal Sidhu
• [OpenWrt-Devel] SVN to GIT transition   Javier Domingo Cansino
• [OpenWrt-Devel] [PATCH 6/8] ramips: improve mt7621 spi chip select   John Crispin
• [OpenWrt-Devel] [PATCH 6/8] ramips: improve mt7621 spi chip select   Mingyu Li
• [OpenWrt-Devel] SVN to GIT transition   Felix Fietkau
• [OpenWrt-Devel] [PATCH] [ar71xx] Send power to USB port on WNR2200   Riley Baird
• [OpenWrt-Devel] SVN to GIT transition   Javier Domingo Cansino
• [OpenWrt-Devel] How to config GPIO and read the GPIO value in OpenWRT   Afkar Rafique
• [OpenWrt-Devel] SVN to GIT transition   Roman Yeryomin
• [OpenWrt-Devel] How to config GPIO and read the GPIO value in OpenWRT   smilebef at gmail.com
• [OpenWrt-Devel] How to config GPIO and read the GPIO value in OpenWRT   Martin Blumenstingl
• [OpenWrt-Devel] Broken SPI transfers on TD-W8970 (latest trunk)   Martin Blumenstingl
• [OpenWrt-Devel] [PATCH 1/2] lantiq: Fixed reading the number of RX FIFOs in the SPI driver   Martin Blumenstingl
• [OpenWrt-Devel] [PATCH 2/2] lantiq: Print the status register whenever an error occurs   Martin Blumenstingl
• [OpenWrt-Devel] Supporting proprietary code   Samba Siva Karthik Bollam
• [OpenWrt-Devel] Supporting proprietary code   James Hilliard
• [OpenWrt-Devel] Supporting proprietary code   Samba Siva Karthik Bollam
• [OpenWrt-Devel] Supporting proprietary code   James Hilliard
• [OpenWrt-Devel] how we hope to fix wifi and the internet   Dave Taht
• [OpenWrt-Devel] [PATCH] generic: add 8139cp fixes, enable hardware csum/tso on 4.0+   David Woodhouse
• [OpenWrt-Devel] How to config GPIO and read the GPIO value in OpenWRT   Afkar Rafique
• [OpenWrt-Devel] Broken SPI transfers on TD-W8970 (latest trunk)   John Crispin
• [OpenWrt-Devel] Question about kernel build number   Drasko DRASKOVIC
• [OpenWrt-Devel] Question about kernel build number   Hannu Nyman
• [OpenWrt-Devel] [PATCH] package/devel/perf: fix build for kernel 4.1   Alexandru Ardelean
• [OpenWrt-Devel] [PATCH] target/ramips: NixCore X1 Board Support   Andrew Gaylo
• [OpenWrt-Devel] [PATCH] target/ramips: NixCore X1 Board Support   John Crispin
• [OpenWrt-Devel] [PATCH] target/ramips: NixCore X1 Board Support   Andrew Gaylo
• [OpenWrt-Devel] [PATCH] target/ramips: NixCore X1 Board Support   John Crispin
• [OpenWrt-Devel] [PATCH] ramips: NixCore X1 Board Support unified patch   Andrew Gaylo
• [OpenWrt-Devel] [PATCH][ar71xx] Mikrotik Routerboard RB2011 switch fix   George Chriss
• [OpenWrt-Devel] [PATCH][ar71xx] Mikrotik Routerboard RB2011 switch fix   Fernando Frediani
• [OpenWrt-Devel] [PATCH][ar71xx] Mikrotik Routerboard RB2011 switch fix   George Chriss
• [OpenWrt-Devel] [PATCH][ar71xx] Mikrotik Routerboard RB2011 switch fix   Fernando Frediani
• [OpenWrt-Devel] How to config GPIO and read the GPIO value in OpenWRT   Hartmut Knaack
• [OpenWrt-Devel] Broken SPI transfers on TD-W8970 (latest trunk)   Martin Blumenstingl
• [OpenWrt-Devel] Enforce RSA-Key-Transport on openssl   xxiao8
• [OpenWrt-Devel] How to config GPIO and read the GPIO value in OpenWRT   Afkar Rafique
• [OpenWrt-Devel] [PATCH] base-files: sysupgrade: respect new profile.d infrastructure   Bastian Bittorf
• [OpenWrt-Devel] [PATCH][ar71xx] add support for tp-link wr841n v10 image generation   Bastian Bittorf
• [OpenWrt-Devel] [PATCH] busybox: enable find mtime support by default   Dirk Brenken
• [OpenWrt-Devel] [PATCH] busybox: enable find mtime support by default   Etienne Champetier
• [OpenWrt-Devel] [PATCH] busybox: enable find mtime support by default   Bastian Bittorf
• [OpenWrt-Devel] [PATCH] busybox: enable find mtime support by default   Dirk Brenken
• [OpenWrt-Devel] [PATCH] gpsd: initial add to packages   Pushpal Sidhu
• [OpenWrt-Devel] [PATCH] [SIGNED-OFF] ar71xx: Add support for WeIO board   Drasko DRASKOVIC
• [OpenWrt-Devel] [PATCH 0/3] Add support for CPE210/220/510/520 v1.1   Matthias Schiffer
• [OpenWrt-Devel] [PATCH 1/3] tools/firmware-utils: tplink-safeloader: clean up code   Matthias Schiffer
• [OpenWrt-Devel] [PATCH 2/3] tools/firmware-utils: tplink-safeloader: fix support-list format, clean up vendor information   Matthias Schiffer
• [OpenWrt-Devel] [PATCH 3/3] tools/firmware-utils: tplink-safeloader: add version 1.1 support to CPE210/220/510/520   Matthias Schiffer
• [OpenWrt-Devel] [PATCH] ar71xx: add 4.1 support   Stijn Tintel
• [OpenWrt-Devel] How to config GPIO and read the GPIO value in OpenWRT   Hartmut Knaack
• [OpenWrt-Devel] Package compile which requires Python.h   W. Michael Petullo
• [OpenWrt-Devel] Package compile which requires Python.h   Alexandru Ardelean
• [OpenWrt-Devel] building a mips/uclibc toolchain relying on gcc 4.9   Arturo Rinaldi
• [OpenWrt-Devel] building a mips/uclibc toolchain relying on gcc 4.9   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH, v2] dnsmasq: prevent forwarding RFC6303 zones   Kevin Darbyshire-Bryant
• [OpenWrt-Devel] [PATCH] ar71xx: add 4.1 support   Roman Yeryomin
• [OpenWrt-Devel] [PATCH] busybox: enable find mtime support by default   Dirk Brenken
• [OpenWrt-Devel] [PATCH] busybox: enable find mtime support by default   Etienne Champetier
• [OpenWrt-Devel] [PATCH, v2] dnsmasq: prevent forwarding RFC6303 zones   Stefan Monnier
• [OpenWrt-Devel] How to config GPIO and read the GPIO value in OpenWRT   Afkar Rafique
• [OpenWrt-Devel] [PATCH] busybox: enable find mtime support by default   Dirk Brenken
• [OpenWrt-Devel] [PATCH, v2] dnsmasq: prevent forwarding RFC6303 zones   Kevin Darbyshire-Bryant
• [OpenWrt-Devel] how to stop a inittab service without reboot   Claudio Thomas
• [OpenWrt-Devel] how to stop a inittab service without reboot   John Crispin
• [OpenWrt-Devel] [PATCH] gpsd: initial add to packages   John Crispin
• [OpenWrt-Devel] how to stop a inittab service without reboot   Claudio Thomas
• [OpenWrt-Devel] [PATCH v5] ar71xx: Add Gainstrong MiniBox v1.0 support to trunk   Stijn Segers
• [OpenWrt-Devel] dan gillmor nails why I just did what I did   Dave Taht
• [OpenWrt-Devel] [PATCH] ar71xx: add 4.1 support   Stijn Tintel
• [OpenWrt-Devel] (no subject)   L. D. Pinney
• [OpenWrt-Devel] [PATCH] CC: ar71xx: Bitmain Antminer S1 & S3 cleanup   L. D. Pinney
• [OpenWrt-Devel] [PATCH]v2 CC: ar71xx: Bitmain Antminer S1 & S3 cleanup   L. D. Pinney
• [OpenWrt-Devel] [PATCH] ar71xx: add 4.1 support   Ted Hess
• [OpenWrt-Devel] [FCC] dan gillmor nails why I just did what I did   L. D. Pinney
• [OpenWrt-Devel] Firmware Upgrade - Mikrotik - ar71xx   Nishant Sharma
• [OpenWrt-Devel] RFC: uClibc and xattr   Maxim Storchak
• [OpenWrt-Devel] [PATCH] libpcap: USB support by default if usbmon is enabled   Bjørn Mork
• [OpenWrt-Devel] [PATCH 1/2] [netifd] multicast flag control   Podolak, Nicholas
• [OpenWrt-Devel] [PATCH 2/2] [gre] multicast flag control   Podolak, Nicholas
• [OpenWrt-Devel] Firmware Upgrade - Mikrotik - ar71xx   David Hutchison
• [OpenWrt-Devel] [PATCH] libpcap: USB support by default if usbmon is enabled   Karl Palsson
• [OpenWrt-Devel] Firmaware size MT7628   Baptiste Clenet
• [OpenWrt-Devel] [PATCH] CC: ramips: WIZnet WizFi630A Platfrom support - board detection   Tobias Welz
• [OpenWrt-Devel] Firmaware size MT7628   Baptiste Clenet
• [OpenWrt-Devel] Firmaware size MT7628   Baptiste Clenet
• [OpenWrt-Devel] [packages] broken package: procd is broken in 15.05 (#1879)   Daniel Golle
• [OpenWrt-Devel] [PATCH] omcproxy: fix PKG_LICENSE string   Daniel Golle
• [OpenWrt-Devel] how to stop a inittab service without reboot   Claudio Thomas
• [OpenWrt-Devel] Firmware Upgrade - Mikrotik - ar71xx   Ufo
• [OpenWrt-Devel] [PATCH] uClibc: enable xattr support to make feature sets of libc implementations closer to each other   Maxim Storchak
• [OpenWrt-Devel] [PATCH] kernel: Fix environment pointer setup in ar71xx/ath79   Ted Hess
• [OpenWrt-Devel] [PATCH] package/devel/perf: fix build for kernel 4.1   John Crispin
• [OpenWrt-Devel] [PATCH] kernel: Fix environment pointer setup in ar71xx/ath79   Stijn Tintel
• [OpenWrt-Devel] AR9344 Openwrt + check Multiple condition /etc/config/system   Afkar Rafique
• [OpenWrt-Devel] [PATCH 1/2] ar71xx: fix ath79_soc_rev value for QCA9531 ver. 2   Matthias Schiffer
• [OpenWrt-Devel] [PATCH 2/2] ar71xx: add support for TP-LINK TL-WR841N/ND v10   Matthias Schiffer
• [OpenWrt-Devel] [PATCH 1/2] ar71xx: fix ath79_soc_rev value for QCA9531 ver. 2   Felix Kaechele
• [OpenWrt-Devel] [packages] broken package: procd is broken in 15.05 (#1879)   Felix Fietkau
• [OpenWrt-Devel] [packages] broken package: procd is broken in 15.05 (#1879)   Daniel Gimpelevich
• [OpenWrt-Devel] Networking on Raspberry Pi Model B   W. Michael Petullo
• [OpenWrt-Devel] Networking on Raspberry Pi Model B   Bruno Randolf
• [OpenWrt-Devel] Networking on Raspberry Pi Model B   Daniel Golle
• [OpenWrt-Devel] [PATCH] generc: fix adm6996 init   Andrej Vlasic
• [OpenWrt-Devel] [PATCH] rtl8xxxu: Add new driver for Realtek WiFi USB devices   Bruno Randolf
• [OpenWrt-Devel] [PATCH] explicitely ignore return value of symlink(3) call   Daniel Golle
• [OpenWrt-Devel] [packages] broken package: procd is broken in 15.05 (#1879)   Carlos Ferreira
• [OpenWrt-Devel] [packages] broken package: procd is broken in 15.05 (#1879)   Carlos Ferreira
• [OpenWrt-Devel] [packages] broken package: procd is broken in 15.05 (#1879)   Daniel Gimpelevich
• [OpenWrt-Devel] [packages] broken package: procd is broken in 15.05 (#1879)   Carlos Ferreira
• [OpenWrt-Devel] [packages] broken package: procd is broken in 15.05 (#1879)   Daniel Gimpelevich
• [OpenWrt-Devel] Progress on Reproducible Builds   bnewbold at robocracy.org
• [OpenWrt-Devel] [PATCH] rtl8xxxu: Add new driver for Realtek WiFi USB devices   W. Michael Petullo
• [OpenWrt-Devel] [PATCH] mac80211: Package firmware for rtl8291cu separately   Bruno Randolf
• [OpenWrt-Devel] [packages] broken package: procd is broken in 15.05 (#1879)   Carlos Ferreira
• [OpenWrt-Devel] [PATCH] ar71xx: Bitmain Antminer S1/S3 set GPIO for USB Power   L. D. Pinney
• [OpenWrt-Devel] buildbot: gb15 fails to upload due to host keys and wyrding timeouts largest firmwares   Hannu Nyman
• [OpenWrt-Devel] Is OpenWrt 15.05 and trunk for Ubnt UAP Pro broken?   Bernd Naumann
• [OpenWrt-Devel] [PATCH] busybox: update to version 1.24.1   Magnus Kroken
• [OpenWrt-Devel] [PATCH] mac80211: fix crash when using mesh (11s) VIF together with another VIF   Matthias Schiffer
• [OpenWrt-Devel] buildbot: gb15 fails to upload due to host keys and wyrding timeouts largest firmwares   Zoltan HERPAI
• [OpenWrt-Devel] buildbot: gb15 fails to upload due to host keys and wyrding timeouts largest firmwares   Hannu Nyman
• [OpenWrt-Devel] [PATCH 1/4] brcm2708-gpu-fw: update to latest version   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 2/4] brcm2708: update 4.1 patches   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 3/4] brcm2708: update modules   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 4/4] brcm2708: copy overlays README to boot partition   Álvaro Fernández Rojas
• [OpenWrt-Devel] Site needs GPG signing   Luke
• [OpenWrt-Devel] Broadcom Wireless AC Driver   openwrtwl at ruggedinbox.com
• [OpenWrt-Devel] [PATCH 2/2] ar71xx: add support for TP-LINK TL-WR841N/ND v10   Alexander Couzens
• [OpenWrt-Devel] [PATCH 2/2] ar71xx: add support for TP-LINK TL-WR841N/ND v10   Matthias Schiffer
• [OpenWrt-Devel] Broadcom Wireless AC Driver   openwrtwl at ruggedinbox.com
• [OpenWrt-Devel] Broadcom dongle host driver (DHD)   openwrtwl at ruggedinbox.com
• [OpenWrt-Devel] [PATCH] busybox: update to version 1.24.1   Bastian Bittorf
• [OpenWrt-Devel] Ubus crashes when using its ACL feature   Wang Bin
• [OpenWrt-Devel] Progress on Reproducible Builds   Steven Barth
• [OpenWrt-Devel] [PATCH] kernel: Fix environment pointer setup in ar71xx/ath79   John Crispin
• [OpenWrt-Devel] Broadcom Wireless AC Driver   Felix Kaechele
• [OpenWrt-Devel] Broadcom Wireless AC Driver   John Crispin
• [OpenWrt-Devel] [PATCH] package/devel/perf: fix build for kernel 4.1   John Crispin
• [OpenWrt-Devel] Broadcom Wireless AC Driver   Imre Kaloz
• [OpenWrt-Devel] Broadcom Wireless AC Driver   openwrtwl at ruggedinbox.com
• [OpenWrt-Devel] Broadcom Wireless AC Driver   John Crispin
• [OpenWrt-Devel] [PATCH] package/devel/perf: fix build for kernel 4.1   Alexandru Ardelean
• [OpenWrt-Devel] [PATCH] package/devel/perf: fix build for kernel 4.1   John Crispin
• [OpenWrt-Devel] [PATCH] kernel: add some missing symbols for 4.3   Daniel Golle
• [OpenWrt-Devel] [PATCH] package/devel/perf: fix build for kernel 4.1   Alexandru Ardelean
• [OpenWrt-Devel] [PATCH] package/devel/perf: fix build for kernel 4.1   John Crispin
• [OpenWrt-Devel] Firmware Upgrade - Mikrotik - ar71xx   Nishant Sharma
• [OpenWrt-Devel] [PATCH] image.mk: Add NOTPARALLEL flag to fix parallel build breakage   Petr Štetiar
• [OpenWrt-Devel] [PATCH] package/devel/perf: fix build for kernel 4.1   Alexandru Ardelean
• [OpenWrt-Devel] [PATCH libubox v2] Support broadcast sockets in usock   John Crispin
• [OpenWrt-Devel] [PATCH] kernel: Fix environment pointer setup in ar71xx/ath79   Ted Hess
• [OpenWrt-Devel] [PATCH 2/8] ramips: remove rt2880 spi lock and clean bit operation   John Crispin
• [OpenWrt-Devel] [PATCH 2/2] ar71xx: add support for TP-LINK TL-WR841N/ND v10   Alexander Couzens
• [OpenWrt-Devel] [PATCH libubox v2] Support broadcast sockets in usock   Javier Domingo Cansino
• [OpenWrt-Devel] [PATCH] toolchain: fix PKG_SOURCE_URL for gdb   Philipp Borgers
• [OpenWrt-Devel] [PATCH 2/8] ramips: remove rt2880 spi lock and clean bit operation   Mingyu Li
• [OpenWrt-Devel] [PATCH] toolchain: fix PKG_SOURCE_URL for gdb   Jo-Philipp Wich
• [OpenWrt-Devel] [PATCH] tools/quilt: update to 0.64   Hannu Nyman
• [OpenWrt-Devel] [PATCH] tools/pkg-config: update to 0.29   Hannu Nyman
• [OpenWrt-Devel] [PATCH v2] busybox: update to version 1.24.1   Magnus Kroken
• [OpenWrt-Devel] [PATCH] mac80211: update regulatory database to master-2015-10-22   Andrej Vlasic
• [OpenWrt-Devel] [PATCH] realview: Create ext4 image by default   Dov Murik
• [OpenWrt-Devel] UniFi-AC-LR ( or UniFi-AC-LITE )   David Hutchison
• [OpenWrt-Devel] [PATCH v3] ar71xx: add support for TP-LINK TL-WR941ND v6 (international version)   Matthias Schiffer
• [OpenWrt-Devel] Extra file permissions   David H. Madden
• [OpenWrt-Devel] [PATCH 2/2] ar71xx: add support for TP-LINK TL-WR841N/ND v10   Alexander Couzens
• [OpenWrt-Devel] [PATCH 2/2] ar71xx: add support for TP-LINK TL-WR841N/ND v10   Matthias Schiffer
• [OpenWrt-Devel] Need to check version of LUCI   nam228
• [OpenWrt-Devel] Need to check version of LUCI   Nishant Sharma
• [OpenWrt-Devel] Extra file permissions   Bastian Bittorf
• [OpenWrt-Devel] [PATCH] mac80211: restricted automatic channel selection   Helmut Schaa
• [OpenWrt-Devel] [PATCH] tools/xz: update to 5.2.2   Hannu Nyman
• [OpenWrt-Devel] [PATCH] Wallys DR-344 support   Philippe DUCHEIN
• [OpenWrt-Devel] [PATCH] mac80211: restricted automatic channel selection   Karl Palsson
• [OpenWrt-Devel] [PATCH] Wallys DR-344 support   Karl Palsson
• [OpenWrt-Devel] [PATCH] mac80211: restricted automatic channel selection   Helmut Schaa
• [OpenWrt-Devel] [PATCH] Add initial support for wdr7500v3   Srdjan Rosic
• [OpenWrt-Devel] [PATCH] Add initial support for wdr7500v3   Srdjan Rosic
• [OpenWrt-Devel] [PATCH] Add initial support for wdr7500v3   Rafał Miłecki
• [OpenWrt-Devel] [PATCH] Add initial support for wdr7500v3   Srdjan Rosic
• [OpenWrt-Devel] UniFi-AC-LR ( or UniFi-AC-LITE )   Jonathan Bither
• [OpenWrt-Devel] UniFi-AC-LR ( or UniFi-AC-LITE )   David Hutchison
• [OpenWrt-Devel] UniFi-AC-LR ( or UniFi-AC-LITE )   David Hutchison
• [OpenWrt-Devel] backport 46936 (procd: rework makefile, split ujail/seccomp)   Etienne Champetier
• [OpenWrt-Devel] backport 46936 (procd: rework makefile, split ujail/seccomp)   John Crispin
• [OpenWrt-Devel] [PATCH] ar71xx: Add support for wdr7500v3   Srdjan Rosic
• [OpenWrt-Devel] [PATCH] ar71xx: Add support for wdr7500v3   Srdjan Rosic
• [OpenWrt-Devel] [PATCH] Add initial support for wdr7500v3   Srdjan Rosic
• [OpenWrt-Devel] AR9344 Openwrt - LAN and WAN interface link issue   Afkar Rafique
• [OpenWrt-Devel] AR9344 Openwrt - LAN and WAN interface link issue   Jo-Philipp Wich
• [OpenWrt-Devel] [PATCH] explicitely ignore return value of symlink(3) call   Felix Fietkau
• [OpenWrt-Devel] [PATCH 0/5] malta: changes for better testing environment   Yousong Zhou
• [OpenWrt-Devel] [PATCH 1/5] generic: fix unrecognized opcode wsbh when building for MIPS16.   Yousong Zhou
• [OpenWrt-Devel] [PATCH 2/5] target.mk: add optimization flags for MIPS 24Kc.   Yousong Zhou
• [OpenWrt-Devel] [PATCH 3/5] malta: set CPU_TYPE:=24kc.   Yousong Zhou
• [OpenWrt-Devel] [PATCH 4/5] malta: convert to router type target.   Yousong Zhou
• [OpenWrt-Devel] [PATCH 5/5] malta: use "static" proto for lan interface   Yousong Zhou
• [OpenWrt-Devel] [PATCH 2/5] target.mk: add optimization flags for MIPS 24Kc.   Cristian Morales Vega
• [OpenWrt-Devel] AR9344 Openwrt - LAN and WAN interface link issue   Afkar Rafique
• [OpenWrt-Devel] AR9344 Openwrt - LAN and WAN interface link issue   Jo-Philipp Wich
• [OpenWrt-Devel] [PATCH 5/5] malta: use "static" proto for lan interface   Florian Fainelli
• [OpenWrt-Devel] [PATCH 4/5] malta: convert to router type target.   Florian Fainelli
• [OpenWrt-Devel] Fwd: [OpenWrt-Commits] r47262 - trunk/target/linux/ar71xx/patches-4.1   Daniel Petre
• [OpenWrt-Devel] [PATCH] ramips: add support for the Asus RP-N53 in the "02_network" boot script   Alberto Mattea
• [OpenWrt-Devel] [PATCH] ramips: add support for the Asus RP-N53 in the "02_network" boot script   Piotr Dymacz
• [OpenWrt-Devel] [PATCH] ramips: add support for the Asus RP-N53 in the "02_network" boot script   Alberto Mattea
• [OpenWrt-Devel] [PATCH v2] ramips: add support for the Asus RP-N53 in the "02_network" boot script   Alberto Mattea
• [OpenWrt-Devel] [PATCH] ramips: add support for the Asus RP-N53 in the "02_network" boot script   Piotr Dymacz
• [OpenWrt-Devel] [PATCH] tools/cmake: update to 3.3.2   Hannu Nyman
• [OpenWrt-Devel] [PATCH 1/3] ramips: mt7620 add icplus phy driver kernel config symbol   Andrej Vlasic
• [OpenWrt-Devel] [PATCH 2/3] ramips: add function to change rt2x00 wifi eeprom mac   Andrej Vlasic
• [OpenWrt-Devel] [PATCH 3/3] ramips: add support for Dovado tiny AC   Andrej Vlasic
• [OpenWrt-Devel] AR9344 Openwrt - LAN and WAN interface link issue   Afkar Rafique
• [OpenWrt-Devel] [PATCH 4/5] malta: convert to router type target.   Yousong Zhou
• [OpenWrt-Devel] [PATCH 5/5] malta: use "static" proto for lan interface   Yousong Zhou
• [OpenWrt-Devel] Fwd: [PATCH 2/5] target.mk: add optimization flags for MIPS 24Kc.   Yousong Zhou
• [OpenWrt-Devel] [PATCH 1/3] ramips: mt7620 add icplus phy driver kernel config symbol   John Crispin
• [OpenWrt-Devel] [RCF] A patch for mt7621 nand controller.   Kirill Berezin
• [OpenWrt-Devel] How to get uhttpd logs   Pratik Prajapati
• [OpenWrt-Devel] How to get uhttpd logs   Jo-Philipp Wich
• [OpenWrt-Devel] How to get uhttpd logs   Pratik Prajapati
• [OpenWrt-Devel] How to get uhttpd logs   Jo-Philipp Wich
• [OpenWrt-Devel] How to get uhttpd logs   Pratik Prajapati
• [OpenWrt-Devel] How to get uhttpd logs   Pratik Prajapati
• [OpenWrt-Devel] [PATCH] Atheros AR8035-A support   Philippe DUCHEIN
• [OpenWrt-Devel] [PATCH 1/3] ramips: mt7620 add icplus phy driver kernel config symbol   Andrej Vlašić
• [OpenWrt-Devel] [PATCH] Wallys DR-344 support   Philippe DUCHEIN
• [OpenWrt-Devel] How to get uhttpd logs   Bastian Bittorf
• [OpenWrt-Devel] [PATCH] ar71xx: Add support for ZyXEL NBG6616.   Benjamin Berg
• [OpenWrt-Devel] [PATCH 1/3] ramips: mt7620 add icplus phy driver kernel config symbol   John Crispin
• [OpenWrt-Devel] [PATCH] ar71xx: Add support for ZyXEL NBG6616.   Karl Palsson
• [OpenWrt-Devel] How to build some package using luarocks   Pratik Prajapati
• [OpenWrt-Devel] Copy file to target filesystem   Pratik Prajapati
• [OpenWrt-Devel] Copy file to target filesystem   Joseph Marlin
• [OpenWrt-Devel] Copy file to target filesystem   Pratik Prajapati
• [OpenWrt-Devel] [PATCH 5/5] malta: use "static" proto for lan interface   Florian Fainelli
• [OpenWrt-Devel] Memory leak in ash with script using "local" incorrectly   Bastian Bittorf
• [OpenWrt-Devel] [PATCH] ramips: preinit: use iproute2 instead of vconfig   Daniel Golle
• [OpenWrt-Devel] Copy file to target filesystem   Nikita Nazarenko
• [OpenWrt-Devel] [PATCH] [packages] generic :add-missing-ubi-in-ramfs-when-sysupgrade   未命名
• [OpenWrt-Devel] [PATCH] [oxnas] fix the incorrect board name which cause sysupgrade failed   未命名
• [OpenWrt-Devel] [PATCH] ramips: add eeprom mtd partition to the Asus RP-N53 dts   Alberto Mattea
• [OpenWrt-Devel] [PATCH] [oxnas] fix the incorrect board name which cause sysupgrade failed   Daniel Golle
• [OpenWrt-Devel] [PATCH] iproute2: fix compile with uClibc-ng   Stijn Tintel
• [OpenWrt-Devel] [PATCH CC] procd: rework makefile, split ujail/seccomp   Etienne CHAMPETIER
• [OpenWrt-Devel] [PATCH] ramips: add support for ZBT WG2626   Daniel Golle
• [OpenWrt-Devel] [PATCH] oxnas: fix the incorrect board names which cause sysupgrade failed   play4fun
• [OpenWrt-Devel] [PATCH] [packages] generic :add-missing-ubi*-in-ramfs-when-sysupgrade   未命名
• [OpenWrt-Devel] Memory leak in ash with script using "local" incorrectly   Rafał Miłecki
• [OpenWrt-Devel] [PATCH] oxnas: fix the incorrect board names which cause sysupgrade failed   Daniel Golle
• [OpenWrt-Devel] [PATCH] ramips: add support for ZBT WG2626   Piotr Dymacz
• [OpenWrt-Devel] [PATCH] oxnas: fix the incorrect board names which cause sysupgrade failed   未命名
• [OpenWrt-Devel] [PATCH] oxnas: fix the incorrect board names which cause sysupgrade failed   play4fun
• [OpenWrt-Devel] [PATCH] oxnas: fix the incorrect board nameswhich cause sysupgrade failed   未命名
• [OpenWrt-Devel] [PATCH] oxnas: fix the incorrect board names which cause sysupgrade failed   Daniel Golle
• [OpenWrt-Devel] [PATCH] Allow kernel modules to keep build ID debug symbol.   Toke Høiland-Jørgensen
• [OpenWrt-Devel] [PATCH] ar71xx: Add support for ZyXEL NBG6616.   Benjamin Berg
• [OpenWrt-Devel] [PATCH] Atheros AR8035-A support   Conor O'Gorman
• [OpenWrt-Devel] [PATCH] Allow kernel modules to keep build ID debug symbol.   Felix Fietkau
• [OpenWrt-Devel] [PATCH] Allow kernel modules to keep build ID debug symbol.   Toke Høiland-Jørgensen
• [OpenWrt-Devel] [PATCH] Allow kernel modules to keep build ID debug symbol.   Felix Fietkau
• [OpenWrt-Devel] [PATCH] Allow kernel modules to keep build ID debug symbol.   Toke Høiland-Jørgensen
• [OpenWrt-Devel] [PATCH] Allow kernel modules to keep build ID debug symbol.   Felix Fietkau
• [OpenWrt-Devel] [PATCH] Allow kernel modules to keep build ID debug symbol.   Toke Høiland-Jørgensen
• [OpenWrt-Devel] [PATCH] Allow kernel modules to keep build ID debug symbol.   Felix Fietkau
• [OpenWrt-Devel] [PATCH] Allow kernel modules to keep build ID debug symbol.   Toke Høiland-Jørgensen
• [OpenWrt-Devel] [PATCH] Allow kernel modules to keep build ID debug symbol.   Felix Fietkau
• [OpenWrt-Devel] [PATCH] Atheros AR8035-A support   Philippe DUCHEIN
• [OpenWrt-Devel] [PATCH] Allow kernel modules to keep build ID debug symbol.   Toke Høiland-Jørgensen
• [OpenWrt-Devel] [PATCH] Allow kernel modules to keep build ID debug symbol.   Felix Fietkau
• [OpenWrt-Devel] [PATCH] Atheros AR8035-A support   Conor O'Gorman
• [OpenWrt-Devel] [PATCH] Allow kernel modules to keep build ID debug symbol.   Toke Høiland-Jørgensen
• [OpenWrt-Devel] [PATCH] Atheros AR8035-A support   Christian Lamparter
• [OpenWrt-Devel] [PATCH] Atheros AR8035-A support   Philippe DUCHEIN
• [OpenWrt-Devel] [PATCH v2] Allow kernel modules to set build ID debug symbol   Toke Høiland-Jørgensen
• [OpenWrt-Devel] [PATCH] image.mk: Add NOTPARALLEL flag to fix parallel build breakage   Felix Fietkau
• [OpenWrt-Devel] [PATCH RFC 10/10] ipq806x: wrap ubi in itb   Matthew McClintock
• [OpenWrt-Devel] [PATCH] image.mk: Add NOTPARALLEL flag to fix parallel build breakage   Petr Štetiar
• [OpenWrt-Devel] [PATCH] image.mk: Add NOTPARALLEL flag to fix parallel build breakage   Felix Fietkau
• [OpenWrt-Devel] [PATCH] image.mk: Add NOTPARALLEL flag to fix parallel build breakage   Petr Štetiar
• [OpenWrt-Devel] [PATCH] busybox: enable find mtime support by default   Felix Fietkau
• [OpenWrt-Devel] imx6/oxnas/kirkwood: Refactor duplicate code in image creation   Petr Štetiar
• [OpenWrt-Devel] [PATCH 1/8] include/image.mk: Introduce sanitized profile variable   Petr Štetiar
• [OpenWrt-Devel] [PATCH 2/8] imx6: image: Refactor sanitize_profile_name using PROFILE_SANITIZED variable   Petr Štetiar
• [OpenWrt-Devel] [PATCH 3/8] kirkwood: image: Refactor sanitize_profile_name using PROFILE_SANITIZED var   Petr Štetiar
• [OpenWrt-Devel] [PATCH 4/8] oxnas: image: Refactor sanitize_profile_name using PROFILE_SANITIZED variable   Petr Štetiar
• [OpenWrt-Devel] [PATCH 5/8] include/image.mk: Use PROFILE_SANITIZED in targz image task   Petr Štetiar
• [OpenWrt-Devel] [PATCH 6/8] imx6: image: Remove custom mkfs targz override as base should be fine now   Petr Štetiar
• [OpenWrt-Devel] [PATCH 7/8] kirkwood: image: Remove custom mkfs targz override as base should be fine now   Petr Štetiar
• [OpenWrt-Devel] [PATCH 8/8] oxnas: image: Remove custom mkfs targz override as base should be fine now   Petr Štetiar
• [OpenWrt-Devel] [PATCH 0/7] migrate tl-wr841nd-v1.5 tl-wdr6500-v2   Alexander Couzens
• [OpenWrt-Devel] [PATCH 1/7] ar71xx/image: introduce TPLINK_HEADER_VERSION variable for tplink image   Alexander Couzens
• [OpenWrt-Devel] [PATCH 2/7] ar71xx/image: refactor templates tplink-chn-v2   Alexander Couzens
• [OpenWrt-Devel] [PATCH 3/7] ar71xx/image: migrate tl-wdr6500-v2 to new image build steps   Alexander Couzens
• [OpenWrt-Devel] [PATCH 4/7] ar71xx/image: remove old unused build step TPLINK-64K   Alexander Couzens
• [OpenWrt-Devel] [PATCH 5/7] ar71xx/image: migrate tl-wr841nd-v1.5 to new build step using squashfs+jffs2 instead of squashfs-only   Alexander Couzens
• [OpenWrt-Devel] [PATCH 6/7] ar71xx/image: remove old unused build code for TPLINKOLD   Alexander Couzens
• [OpenWrt-Devel] [PATCH 7/7] ar71xx/image: remove old unused build code for TPLINK   Alexander Couzens
• [OpenWrt-Devel] [PATCH] ar71xx: Add support for ZyXEL NBG6616.   Alexander Couzens
• [OpenWrt-Devel] [PATCH v2 0/5] malta: changes for a better testing environment   Yousong Zhou
• [OpenWrt-Devel] [PATCH v2 1/5] generic: fix unrecognized opcode wsbh when building for MIPS16.   Yousong Zhou
• [OpenWrt-Devel] [PATCH v2 2/5] target.mk: add optimization flags for MIPS 24Kc.   Yousong Zhou
• [OpenWrt-Devel] [PATCH v2 3/5] malta: set CPU_TYPE:=24kc.   Yousong Zhou
• [OpenWrt-Devel] [PATCH v2 4/5] malta: use as a default type device   Yousong Zhou
• [OpenWrt-Devel] [PATCH v2 5/5] malta: make eth0 the wan interface by default   Yousong Zhou
• [OpenWrt-Devel] [PATCH, resend] busybox: enable find mtime support by default   Dirk Brenken
• [OpenWrt-Devel] [PATCH, resend] busybox: enable find mtime support by default   Felix Fietkau
• [OpenWrt-Devel] [PATCH] oxnas: fix the incorrect board names which cause sysupgrade failed   Felix Fietkau
• [OpenWrt-Devel] [PATCH 3/7] ar71xx/image: migrate tl-wdr6500-v2 to new image build steps   Weijie Gao
• [OpenWrt-Devel] [PATCH 3/7] ar71xx/image: migrate tl-wdr6500-v2 to new image build steps   Alexander Couzens
• [OpenWrt-Devel] [PATCH 3/7] ar71xx/image: migrate tl-wdr6500-v2 to new image build steps   Weijie Gao
• [OpenWrt-Devel] [PATCH 3/7] ar71xx/image: migrate tl-wdr6500-v2 to new image build steps   Felix Fietkau
• [OpenWrt-Devel] [PATCH 3/7] ar71xx/image: migrate tl-wdr6500-v2 to new image build steps   Weijie Gao
• [OpenWrt-Devel] [PATCH 3/7] ar71xx/image: migrate tl-wdr6500-v2 to new image build steps   Felix Fietkau
• [OpenWrt-Devel] fstools: Update libblkid and add F2FS support   Martin Blumenstingl
• [OpenWrt-Devel] [PATCH 1/2] libblkid-tiny: Update the code from util-linux's libblkid   Martin Blumenstingl
• [OpenWrt-Devel] [PATCH 2/2] libblkid-tiny: Add F2FS support   Martin Blumenstingl
• [OpenWrt-Devel] fstools: block command doesn't recognize supported filesystem types because of libblkid-tiny   Martin Blumenstingl
• [OpenWrt-Devel] [PATCH] uboot-lantiq: Add SoC version 1.2 support for Arcadyan VGV7510KW22   Martin Blumenstingl
• [OpenWrt-Devel] [PATCH, resend] busybox: enable find mtime support by default   Dirk Brenken
• [OpenWrt-Devel] [PATCH v2 0/5] malta: changes for a better testing environment   Florian Fainelli
• [OpenWrt-Devel] [PATCH] px5g: Use SHA-256 when generating self-signed certificates   Martin Blumenstingl
• [OpenWrt-Devel] How to start   Pumaridd Pumaridd
• [OpenWrt-Devel] How to start   Javier Domingo Cansino
• [OpenWrt-Devel] How to start   Pumaridd Pumaridd

Last message date: Sat Oct 31 20:29:18 EDT 2015
Archived on: Thu Jun 25 05:56:17 EDT 2020

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...