[OpenWrt-Devel] [PATCH] target/ramips: NixCore X1 Board Support

[Andrew Gaylo]

from: Andrew Gaylo <admin at clisystems.com>

This submission is for support of the NixCore X1 board at
http://nixcores.com.  This board uses the RT5350 Ralink processor
already supported by a number of boards in the OpenWRT repository.

Signed-off-by: Andrew Gaylo <admin at clisystems.com>
---
diff -uprN 
openwrt_vanilla/target/linux/ramips/base-files/etc/board.d/02_network 
openwrt_submit/target/linux/ramips/base-files/etc/board.d/02_network
--- 
openwrt_vanilla/target/linux/ramips/base-files/etc/board.d/02_network	2015-10-13 
11:10:15.784957130 -0600
+++ 
openwrt_submit/target/linux/ramips/base-files/etc/board.d/02_network	2015-10-15 
08:35:48.341341581 -0600
@@ -217,7 +217,7 @@ ramips_setup_interfaces()
  		ucidef_add_switch_vlan "switch0" "1" "0t 1 2 3 4"
  		ucidef_add_switch_vlan "switch0" "2" "0t 5"
  		;;
-
+    nixcorex1 |\
  	vocore)
  		ucidef_set_interface_lan "eth0.1"
  		ucidef_add_switch "switch0" "1" "1"
diff -uprN openwrt_vanilla/target/linux/ramips/base-files/lib/ramips.sh 
openwrt_submit/target/linux/ramips/base-files/lib/ramips.sh
--- 
openwrt_vanilla/target/linux/ramips/base-files/lib/ramips.sh	2015-10-13 
11:10:15.784957130 -0600
+++ 
openwrt_submit/target/linux/ramips/base-files/lib/ramips.sh	2015-10-15 
08:36:21.021340613 -0600
@@ -232,6 +232,9 @@ ramips_board_detect() {
  	*"Nexx WT3020")
  		name="wt3020"
  		;;
+    *"NixcoreX1")
+		name="nixcorex1"
+		;;
  	*"NW718")
  		name="nw718"
  		;;
diff -uprN 
openwrt_vanilla/target/linux/ramips/base-files/lib/upgrade/platform.sh 
openwrt_submit/target/linux/ramips/base-files/lib/upgrade/platform.sh
--- 
openwrt_vanilla/target/linux/ramips/base-files/lib/upgrade/platform.sh	2015-10-13 
11:10:15.784957130 -0600
+++ 
openwrt_submit/target/linux/ramips/base-files/lib/upgrade/platform.sh	2015-10-15 
08:37:00.029339459 -0600
@@ -72,6 +72,7 @@ platform_check_image() {
  	mr-102n | \
  	mzk-w300nh2 | \
  	nbg-419n | \
+    nixcorex1 | \
  	nw718 | \
  	omni-emb | \
  	omni-emb-hpm | \
diff -uprN openwrt_vanilla/target/linux/ramips/image/Makefile 
openwrt_submit/target/linux/ramips/image/Makefile
--- openwrt_vanilla/target/linux/ramips/image/Makefile	2015-10-13 
11:10:15.788957130 -0600
+++ openwrt_submit/target/linux/ramips/image/Makefile	2015-10-15 
08:37:25.885338693 -0600
@@ -569,6 +569,8 @@ Image/Build/Profile/MZKW300NH2=$(call Bu

  Image/Build/Profile/NCS601W=$(call 
BuildFirmware/Default8M/$(1),$(1),ncs601W,NCS601W)

+Image/Build/Profile/NIXCORE-X1=$(call 
BuildFirmware/Default8M/$(1),$(1),nixcorex1,NIXCORE-X1)
+
  nw718_mtd_size=3801088
  Image/Build/Profile/NW718=$(call 
BuildFirmware/CustomFlashFactory/$(1),$(1),nw718m,NW718,$(nw718_mtd_size),ARA1B4NCRNW718;1,factory)

@@ -741,6 +743,7 @@ define Image/Build/Profile/Default
  	$(call Image/Build/Profile/MZKW300NH2,$(1))
  	$(call Image/Build/Profile/NBG-419N,$(1))
  	$(call Image/Build/Profile/NCS601W,$(1))
+	$(call Image/Build/Profile/NIXCORE-X1,$(1))
  	$(call Image/Build/Profile/NW718,$(1))
  	$(call Image/Build/Profile/OMNI-EMB,$(1))
  	$(call Image/Build/Profile/OMNI-PLUG,$(1))
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel