[OpenWrt-Devel] [PATCH] comgt-ncm: Add possibility to choose PDP context type

Andreas Fritiofson andreas.fritiofson at gmail.com
Tue Oct 6 17:12:52 EDT 2015


>> Date: Sun, 20 Sep 2015 23:52:32 +0300
>> Subject: Re: [OpenWrt-Devel] [PATCH] comgt-ncm: Add possibility to
>> choose PDP context type
>> From: sami at olmari.fi
>> To: malaakso at elisanet.fi
>> CC: openwrt-devel at lists.openwrt.org
>>
>> This is not working with Huawei E3276, only "option pdptype 'IP' works,
>> IPV6 and IPV4V6... I do not have IPv6 offered from ISP currently,
>> should it matter. At attachment there is clips from the log using each
>> option type, most important clip here, same for IPV4V6 (aka no option
>> set):
>>
>> Sun Sep 20 20:32:10 2015 daemon.notice netifd: wan (2935): sending ->
>> AT+CGDCONT=1,"IPV6","opengate"
>> Sun Sep 20 20:32:11 2015 daemon.notice netifd: wan (2935): Error
>> running AT-command
>> Sun Sep 20 20:32:11 2015 daemon.notice netifd: wan (2935): Failed to
>> initialize modem
>>
>> There is also some random other errors seen on log on _working_
>> connection, I don't know do they bear any importance, as system works.
>> Anything I could do to make it work so that it wouldn't at least fail?
>>
>>   Sami Olmari
>>
>> P.S. I've updated wiki with this new option information :)
>>
>
> Hi,
>
> If you don't have IPv6 from your ISP, then that is expected. That doesn't
change
> the fact that my patch does introduce a regression for those without
IPv6, them
> having to manually disable it (setting ipv6 to 0 selects "IP" by
default). I'll have to
> think the defaults through again, most likely changing PDP type "IP" to
be the
> default unless IPv6 is explicitely _enabled_.
>
> Thanks for reporting!
>
> Matti

Hi there!

I noticed this regression today after upgrading to trunk. I don't think
this is the complete answer though.

I have the same E3276 dongle and I *do* have IPv6 from my ISP (Tele2,
Sweden). The same SIM-card in a B593s-22 router gets me a native IPv6
connection.

I see the exact same error in the logs and I've verified that E3276 doesn't
accept IPV6 (or IPV4V6, or ... ) as the second parameter by manually echo
-e 'AT+CGDCONT=1,"IPV6","internet.tele2.se",""\r' > /dev/cdc-wdm0. Only
"IP" works.

Is the AT+CGDCONT command the correct way to select the PDP type on Huawei
NCM dongles? What info is that based on?

If there's something you want me to try, just shout.

/Andreas
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20151006/4779d3b6/attachment.htm>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel


More information about the openwrt-devel mailing list