[OpenWrt-Devel] [PATCH 3/3] tools/firmware-utils: tplink-safeloader: add version 1.1 support to CPE210/220/510/520

[Matthias Schiffer]

The hardware is identical to version 1.0, add the new models to the support
list.

Also remove the empty line at the end of the support list, the current
stock images don't have it either.

Signed-off-by: Matthias Schiffer <mschiffer at universe-factory.net>
---
 tools/firmware-utils/src/tplink-safeloader.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/tools/firmware-utils/src/tplink-safeloader.c b/tools/firmware-utils/src/tplink-safeloader.c
index 66658aa..77a894b 100644
--- a/tools/firmware-utils/src/tplink-safeloader.c
+++ b/tools/firmware-utils/src/tplink-safeloader.c
@@ -129,17 +129,17 @@ static const struct flash_partition_entry cpe510_partitions[] = {
 
 /**
    The support list for CPE210/220/510/520
-
-   The stock images also contain strings for two more devices: BS510 and BS210.
-   At the moment, there exists no public information about these devices.
 */
 static const char cpe510_support_list[] =
 	"SupportList:\r\n"
 	"CPE510(TP-LINK|UN|N300-5):1.0\r\n"
+	"CPE510(TP-LINK|UN|N300-5):1.1\r\n"
 	"CPE520(TP-LINK|UN|N300-5):1.0\r\n"
+	"CPE520(TP-LINK|UN|N300-5):1.1\r\n"
 	"CPE210(TP-LINK|UN|N300-2):1.0\r\n"
+	"CPE210(TP-LINK|UN|N300-2):1.1\r\n"
 	"CPE220(TP-LINK|UN|N300-2):1.0\r\n"
-	"\r\n";
+	"CPE220(TP-LINK|UN|N300-2):1.1\r\n";
 
 #define error(_ret, _errno, _str, ...)				\
 	do {							\
-- 
2.6.1
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel