[OpenWrt-Devel] UniFi-AC-LR ( or UniFi-AC-LITE )

David Hutchison dhutchison at bluemesh.net
Tue Oct 27 18:27:03 EDT 2015


Thank you,

That indeed helps, I was able to find the header in the UniFi
Controller ( There is a "dl" directory ). TFTP accepts
"BZ.qca956x.v6.0.0-OpenWrt-r47065"
I still haven't had luck getting it to boot yet; definitely getting closer.

-- Davey

On Tue, Oct 27, 2015 at 4:20 PM, Jonathan Bither <jonbither at gmail.com> wrote:
> Hello Davey,
>
> I haven't gotten a chance to mess with one of these yet due to availability,
> but I placed a copy of the binary image for the AP on my web-server for you.
> This came from a 4.7.5 install.
> https://jonbither.com/unifi/firmware/U7PG2/3.4.7.3284/firmware.bin
>
> According to the bundles file both the UAP-AC-LITE and the UAP-AC-LR use the
> same image file.
> 'cat /usr/lib/unifi/dl/firmware/bundles.json | python -m json.tool'
> {
>     "U7LR": {
>         "display": "UniFi AP-AC-LR",
>         "path": "U7PG2/3.4.7.3284/firmware.bin",
>         "version": "3.4.7.3284"
>     },
>     "U7LT": {
>         "display": "UniFi AP-AC-Lite",
>         "path": "U7PG2/3.4.7.3284/firmware.bin",
>         "version": "3.4.7.3284"
>     },
> }
>
> Hopefully the header will be similar.
> `strings /usr/lib/unifi/dl/firmware/U7PG2/3.4.7.3284/firmware.bin | head
> -n1`
> UBNTBZ.qca956x.v3.4.7.3284.150911.1650
>
>
> Hope any of this helps.
> -Jonathan
>
>
>
> On 10/26/2015 06:16 PM, David Hutchison wrote:
>>
>> I just got this board and I am looking to port OpenWRT to it. I have
>> taken this board apart and can receive serial, however TX doesn't
>> appear to work ( Maybe there is a GPIO, I need to toggle? ). These two
>> new UniFi-AC boards have the new QCA953x processor in them ( LITE and
>> LR ). This is not the Broadcom 48V UniFi that is already supported;
>> these just came out.
>>
>> I was hoping to reach out to the group who have experience building
>> the image with the proper "MAGIC HEADER". TFTP will not accept the
>> image and think the image is invalid unless the proper header exists.
>> With other board ports I have grabbed the original AirOS firmware, and
>> you could see the header at the top of the .bin. However with UniFi
>> they don't seem to have the image easily downloadable.
>>
>> I am hoping if anyone would have any insight to finding this? Once I
>> can TFTP an image onto it; I can try making an architecture patch for
>> it.
>>
>> Thanks,
>> -- Davey
>> _______________________________________________
>> openwrt-devel mailing list
>> openwrt-devel at lists.openwrt.org
>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>>
>
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel



More information about the openwrt-devel mailing list