[OpenWrt-Devel] [PATCH] ar71xx: Add support for ZyXEL NBG6616.
Karl Palsson
karlp at tweak.net.au
Thu Oct 29 09:30:41 EDT 2015
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
I might personally think it's a tedious and often confusing
policy, but the current kernel policy is that the led names have
the board name, like "nbg6616:green:power" rather than
"zyxel:green:power" You can see this done for a lot of the other
targets.
Only one tiny comment on the ordering of mach types.
Cheers,
Karl P
Benjamin Berg <benjamin at sipsolutions.net> wrote:
> Signed-off-by: Benjamin Berg <benjamin at sipsolutions.net>
> ---
> target/linux/ar71xx/base-files/etc/diag.sh | 3 +
> .../etc/hotplug.d/firmware/11-ath10k-caldata | 2 +
> .../ar71xx/base-files/etc/uci-defaults/01_leds | 7 ++
> .../ar71xx/base-files/etc/uci-defaults/02_network | 2 +-
> target/linux/ar71xx/base-files/lib/ar71xx.sh | 3 +
> .../ar71xx/base-files/lib/upgrade/platform.sh | 1 +
> .../ar71xx/files/arch/mips/ath79/mach-nbg6716.c | 127 +++++++++++++++++++--
> target/linux/ar71xx/generic/profiles/zyxel.mk | 12 ++
> target/linux/ar71xx/image/Makefile | 29 +++++
> .../700-MIPS-ath79-openwrt-machines.patch | 5 +-
> 10 files changed, 177 insertions(+), 14 deletions(-)
>
> diff --git a/target/linux/ar71xx/base-files/etc/diag.sh
> b/target/linux/ar71xx/base-files/etc/diag.sh index
> 1375f38..548c223 100644
> --- a/target/linux/ar71xx/base-files/etc/diag.sh
> +++ b/target/linux/ar71xx/base-files/etc/diag.sh
> @@ -173,6 +173,9 @@ get_status_led() {
> nbg460n_550n_550nh)
> status_led="nbg460n:green:power"
> ;;
> + nbg6616)
> + status_led="zyxel:green:power"
> + ;;
> nbg6716)
> status_led="zyxel:white:power"
> ;;
> diff --git
> a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
> b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
> index f53c853..74c3417 100644
> --- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
> +++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
> @@ -84,8 +84,10 @@ case "$FIRMWARE" in
> ath10kcal_extract "art" 20480 2116
> ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -2)
> ;;
> + nbg6616 | \
> nbg6716)
> ath10kcal_extract "RFdata" 20480 2116
> + ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -2)
> ;;
> rb-911g-5hpacd)
> ath10kcal_from_file "/sys/firmware/routerboot/ext_wlan_data" 20480 2116
> diff --git
> a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
> b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds index
> abed456..b25ac34 100644
> --- a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
> +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
> @@ -306,6 +306,13 @@ nbg460n_550n_550nh)
> ucidef_set_led_wlan "wlan" "WLAN" "nbg460n:green:wlan" "phy0tpt"
> ;;
>
> +nbg6616)
> + ucidef_set_led_wlan "wlan" "WLAN" "zyxel:green:wifi2g" "phy1tpt"
> + ucidef_set_led_wlan "wlan5" "WLAN5" "zyxel:green:wifi5g" "phy0tpt"
> + ucidef_set_led_usbdev "usb1" "USB1" "zyxel:green:usb1" "1-1"
> + ucidef_set_led_usbdev "usb2" "USB2" "zyxel:green:usb2" "2-1"
> + ;;
> +
> nbg6716)
> ucidef_set_led_netdev "wan" "WAN" "zyxel:white:internet" "eth1"
> ucidef_set_led_wlan "wlan" "WLAN" "zyxel:white:wifi2g" "phy1tpt"
> diff --git
> a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
> b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
> index f6ac891..d8c575d 100644
> --- a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
> +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
> @@ -134,7 +134,7 @@ nbg460n_550n_550nh)
> ucidef_add_switch_vlan "switch0" "0" "0 1 2 3 5"
> ;;
>
> -nbg6716)
> +nbg6716|nbg6616)
> ucidef_set_interfaces_lan_wan "eth0.1" "eth1"
> ucidef_add_switch "switch0" "1" "1"
> ucidef_add_switch_vlan "switch0" "1" "0t 1 2 3 4"
> diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh
> b/target/linux/ar71xx/base-files/lib/ar71xx.sh index
> 5f02e4e..d39e179 100755
> --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
> +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
> @@ -568,6 +568,9 @@ ar71xx_board_detect() {
> *"Zyxel NBG6716")
> name="nbg6716"
> ;;
> + *"Zyxel NBG6616")
> + name="nbg6616"
> + ;;
> *OM2P)
> name="om2p"
> ;;
> diff --git
> a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
> b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index
> a464fee..ae498b9 100755
> --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
> +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
> @@ -405,6 +405,7 @@ platform_check_image() {
> return 1
> ;;
>
> + nbg6616 | \
> unifi-outdoor-plus | \
> uap-pro)
> [ "$magic_long" != "19852003" ] && {
> diff --git
> a/target/linux/ar71xx/files/arch/mips/ath79/mach-nbg6716.c
> b/target/linux/ar71xx/files/arch/mips/ath79/mach-nbg6716.c
> index 69a73cc..ecb1799 100644
> --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-nbg6716.c
> +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-nbg6716.c
> @@ -1,5 +1,5 @@
> /*
> - * ZyXEL NBG6716 board support
> + * ZyXEL NBG6716/NBG6616 board support
> *
> * Based on the Qualcomm Atheros AP135/AP136 reference board support code
> * Copyright (c) 2012 Qualcomm Atheros
> @@ -66,6 +66,11 @@
> #define NBG6716_WMAC_CALDATA_OFFSET 0x1000
> #define NBG6716_PCIE_CALDATA_OFFSET 0x5000
>
> +/* NBG6616 has a different GPIO usage as it does not have USB Buttons */
> +#define NBG6616_GPIO_LED_USB0 14
> +#define NBG6616_GPIO_LED_USB1 21
> +#define NBG6616_GPIO_LED_WPS 0
> +
> static struct gpio_led nbg6716_leds_gpio[] __initdata = {
> {
> .name = "zyxel:white:internet",
> @@ -147,6 +152,69 @@ static struct gpio_keys_button nbg6716_gpio_keys[] __initdata = {
> },
> };
>
> +
> +
> +static struct gpio_led nbg6616_leds_gpio[] __initdata = {
> + {
> + .name = "zyxel:green:power",
> + .gpio = NBG6716_GPIO_LED_POWER,
> + .active_low = 1,
> + },
> + {
> + .name = "zyxel:green:usb2",
> + .gpio = NBG6616_GPIO_LED_USB0,
> + .active_low = 1,
> + },
> + {
> + .name = "zyxel:green:usb1",
> + .gpio = NBG6616_GPIO_LED_USB1,
> + .active_low = 1,
> + },
> + {
> + .name = "zyxel:green:wifi2g",
> + .gpio = NBG6716_GPIO_LED_WIFI2G,
> + .active_low = 1,
> + },
> + {
> + .name = "zyxel:green:wifi5g",
> + .gpio = NBG6716_GPIO_LED_WIFI5G,
> + .active_low = 1,
> + },
> + {
> + .name = "zyxel:green:wps",
> + .gpio = NBG6616_GPIO_LED_WPS,
> + .active_low = 1,
> + }
> +};
> +
> +static struct gpio_keys_button nbg6616_gpio_keys[] __initdata
> = {
> + {
> + .desc = "RESET button",
> + .type = EV_KEY,
> + .code = KEY_RESTART,
> + .debounce_interval = NBG6716_KEYS_DEBOUNCE_INTERVAL,
> + .gpio = NBG6716_GPIO_BTN_RESET,
> + .active_low = 1,
> + },
> + {
> + .desc = "RFKILL button",
> + .type = EV_KEY,
> + .code = KEY_RFKILL,
> + .debounce_interval = NBG6716_KEYS_DEBOUNCE_INTERVAL,
> + .gpio = NBG6716_GPIO_BTN_RFKILL,
> + .active_low = 1,
> + },
> + {
> + .desc = "WPS button",
> + .type = EV_KEY,
> + .code = KEY_WPS_BUTTON,
> + .debounce_interval = NBG6716_KEYS_DEBOUNCE_INTERVAL,
> + .gpio = NBG6716_GPIO_BTN_WPS,
> + .active_low = 1,
> + },
> +};
> +
> +
> static struct ar8327_pad_cfg nbg6716_ar8327_pad0_cfg;
> static struct ar8327_pad_cfg nbg6716_ar8327_pad6_cfg;
> static struct ar8327_led_cfg nbg6716_ar8327_led_cfg;
> @@ -179,9 +247,9 @@ static struct mdio_board_info nbg6716_mdio0_info[] = {
> },
> };
>
> -static void nbg6716_get_mac(const char *name, char *mac)
> +static void nbg6716_get_mac(void* nvram_addr, const char
> *name, char *mac)
> {
> - u8 *nvram = (u8 *) KSEG1ADDR(0x1f040000);
> + u8 *nvram = (u8 *) KSEG1ADDR(nvram_addr);
> int err;
>
> err = ath79_nvram_parse_mac_addr(nvram, 0x10000,
> @@ -190,18 +258,19 @@ static void nbg6716_get_mac(const char *name, char *mac)
> pr_err("no MAC address found for %s\n", name);
> }
>
> -static void __init nbg6716_common_setup(void)
> +static void __init nbg6716_common_setup(u32 leds_num, struct
> gpio_led* leds,
> + u32 keys_num,
> + struct gpio_keys_button* keys,
> + void* art_addr, void* nvram)
> {
> - u8 *art = (u8 *) KSEG1ADDR(0x1f050000);
> + u8 *art = (u8 *) KSEG1ADDR(art_addr);
> u8 tmpmac[ETH_ALEN];
>
> ath79_register_m25p80(NULL);
>
> - ath79_register_leds_gpio(-1, ARRAY_SIZE(nbg6716_leds_gpio),
> - nbg6716_leds_gpio);
> + ath79_register_leds_gpio(-1, leds_num, leds);
> ath79_register_gpio_keys_polled(-1, NBG6716_KEYS_POLL_INTERVAL,
> - ARRAY_SIZE(nbg6716_gpio_keys),
> - nbg6716_gpio_keys);
> + keys_num, keys);
>
> ath79_nfc_set_ecc_mode(AR934X_NFC_ECC_HW);
> ath79_register_nfc();
> @@ -212,7 +281,7 @@ static void __init nbg6716_common_setup(void)
>
> ath79_register_usb();
>
> - nbg6716_get_mac("ethaddr=", tmpmac);
> + nbg6716_get_mac(nvram, "ethaddr=", tmpmac);
>
> ath79_register_pci();
>
> @@ -267,10 +336,46 @@ static void __init nbg6716_010_setup(void)
> nbg6716_ar8327_led_cfg.led_ctrl2 = 0xffb7ffb7;
> nbg6716_ar8327_led_cfg.led_ctrl3 = 0x03ffff00;
>
> - nbg6716_common_setup();
> + nbg6716_common_setup(ARRAY_SIZE(nbg6716_leds_gpio), nbg6716_leds_gpio,
> + ARRAY_SIZE(nbg6716_gpio_keys), nbg6716_gpio_keys,
> + (void*) 0x1f050000, (void*) 0x1f040000);
> +}
> +
> +static void __init nbg6616_010_setup(void)
> +{
> + /* GMAC0 of the AR8337 switch is connected to GMAC0 via RGMII */
> + nbg6716_ar8327_pad0_cfg.mode = AR8327_PAD_MAC_RGMII;
> + nbg6716_ar8327_pad0_cfg.txclk_delay_en = true;
> + nbg6716_ar8327_pad0_cfg.rxclk_delay_en = true;
> + nbg6716_ar8327_pad0_cfg.txclk_delay_sel = AR8327_CLK_DELAY_SEL1;
> + nbg6716_ar8327_pad0_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2;
> +
> + /* GMAC6 of the AR8337 switch is connected to GMAC1 via SGMII */
> + nbg6716_ar8327_pad6_cfg.mode = AR8327_PAD_MAC_SGMII;
> + nbg6716_ar8327_pad6_cfg.rxclk_delay_en = true;
> + nbg6716_ar8327_pad6_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL0;
> +
> + ath79_eth0_pll_data.pll_1000 = 0xa6000000;
> + ath79_eth1_pll_data.pll_1000 = 0x03000101;
> +
> + nbg6716_ar8327_led_cfg.open_drain = 0;
> + nbg6716_ar8327_led_cfg.led_ctrl0 = 0xffb7ffb7;
> + nbg6716_ar8327_led_cfg.led_ctrl1 = 0xffb7ffb7;
> + nbg6716_ar8327_led_cfg.led_ctrl2 = 0xffb7ffb7;
> + nbg6716_ar8327_led_cfg.led_ctrl3 = 0x03ffff00;
> +
> +
> + nbg6716_common_setup(ARRAY_SIZE(nbg6616_leds_gpio), nbg6616_leds_gpio,
> + ARRAY_SIZE(nbg6616_gpio_keys), nbg6616_gpio_keys,
> + (void*) 0x1f040000, (void*) 0x1f030000);
> }
>
> +
> MIPS_MACHINE(ATH79_MACH_NBG6716, "NBG6716",
> "Zyxel NBG6716",
> nbg6716_010_setup);
>
> +MIPS_MACHINE(ATH79_MACH_NBG6616, "NBG6616",
> + "Zyxel NBG6616",
> + nbg6616_010_setup);
> +
> diff --git a/target/linux/ar71xx/generic/profiles/zyxel.mk
> b/target/linux/ar71xx/generic/profiles/zyxel.mk index
> 66258bd..202c237 100644
> --- a/target/linux/ar71xx/generic/profiles/zyxel.mk
> +++ b/target/linux/ar71xx/generic/profiles/zyxel.mk
> @@ -15,3 +15,15 @@ define Profile/NBG_460N_550N_550NH/Description
> endef
>
> $(eval $(call Profile,NBG_460N_550N_550NH))
> +
> +
> +define Profile/NBG6616
> + NAME:=ZyXEL NBG6616
> + PACKAGES:=kmod-usb-core kmod-usb2 kmod-usb-storage kmod-rtc-pcf8563 kmod-ath10k
> +endef
> +
> +define Profile/NBG6616/Description
> + Package set optimized for the ZyXEL NBG6616
> +endef
> +
> +$(eval $(call Profile,NBG6616))
> diff --git a/target/linux/ar71xx/image/Makefile
> b/target/linux/ar71xx/image/Makefile index a659af9..eb2097c
> 100644
> --- a/target/linux/ar71xx/image/Makefile
> +++ b/target/linux/ar71xx/image/Makefile
> @@ -1469,6 +1469,7 @@ zcn1523h_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6208k(rootfs
> mynet_n600_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(devdata)ro,64k(devconf)ro,15872k(firmware),64k(radiocfg)ro
> mynet_rext_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,7808k(firmware),64k(nvram)ro,64k(ART)ro
> zyx_nbg6716_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(env)ro,64k(RFdata)ro,-(nbu);ar934x-nfc:2048k(zyxel_rfsd),2048k(romd),1024k(header),2048k(kernel),-(ubi)
> +zyx_nbg6616_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(env)ro,64k(RFdata)ro,384k(zyxel_rfsd),384k(romd),64k(header),2048k(kernel),13184k(rootfs),15232k at 0x120000(firmware)
> qihoo_c301_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(devdata),64k(devconf),15744k(firmware),64k(warm_start),64k(action_image_config),64k(radiocfg)ro;spi0.1:15360k(upgrade2),1024k(privatedata)
>
>
> @@ -2181,6 +2182,33 @@ define Image/Build/ZyXELNAND
> $(call Image/Build/SysupgradeNAND,$(2),squashfs,$(KDIR_TMP)/$(2)-kernel.jffs2)
> endef
>
> +define Image/Build/ZyXELjffs/buildkernel
> + $(eval kernelsize=$(call mtdpartsize,kernel,$(5)))
> + $(call MkuImageLzma,$(2),$(3) $(5) $(6))
> + mkdir -p $(KDIR_TMP)/$(2)/image/boot
> + cp $(KDIR_TMP)/vmlinux-$(2).uImage $(KDIR_TMP)/$(2)/image/boot/vmlinux.lzma.uImage
> + $(STAGING_DIR_HOST)/bin/mkfs.jffs2 \
> + --pad=$(kernelsize) --big-endian --squash-uids -v -e 64KiB \
> + -o $(KDIR_TMP)/$(2)-kernel.jffs2 \
> + -d $(KDIR_TMP)/$(2)/image \
> + 2>&1 1>/dev/null | awk '/^.+$$$$/'
> + -rm -rf $(KDIR_TMP)/$(2)
> +endef
> +
> +define Image/Build/ZyXELjffs
> + # We cannot currently build a factory image. It is the sysupgrade image
> + # prefixed with a header (which is actually written into the MTD device).
> + # The header is 64kB and is filled with 0xff. The format seems to be:
> + # 2 bytes: 0x0000
> + # 2 bytes: a checksum of the data partition (big endian?)
> + # 4 bytes: length of the contained image file (big endian)
> + # 32 bytes: Firmware Version string (NUL terminated, 0xff padded)
> + # 32 bytes: Model (e.g. "NBG6616", NUL termiated, 0xff padded)
> + # rest: 0xff padding
> + $(eval fwsize=$(call mtdpartsize,firmware,$(4)))
> + $(call CatFiles,$(KDIR_TMP)/$(2)-kernel.jffs2,0,$(KDIR)/root.$(1),$(fwsize),$(call sysupname,$(1),$(2)),64)
> +endef
> +
>
> Image/Build/OpenMesh/buildkernel=$(call MkuImageLzma,$(2))
>
> @@ -2407,6 +2435,7 @@ $(eval $(call SingleProfile,Zcomax,64k,ZCN1523H28,zcn-1523h-2-8,ZCN-1523H-2,ttyS
> $(eval $(call SingleProfile,Zcomax,64k,ZCN1523H516,zcn-1523h-5-16,ZCN-1523H-5,ttyS0,115200,$$(zcn1523h_mtdlayout)))
>
> $(eval $(call SingleProfile,ZyXEL,64k,NBG_460N_550N_550NH,nbg460n_550n_550nh,NBG460N,ttyS0,115200,NBG-460N))
> +$(eval $(call
> SingleProfile,ZyXELjffs,64k,NBG6616,nbg6616,NBG6616,ttyS0,115200,NBG6616,$$(zyx_nbg6616_mtdlayout),mem=128M))
>
> $(eval $(call MultiProfile,AP121,AP121_2M AP121_4M AP121_8M))
> $(eval $(call MultiProfile,AP136,AP136_010 AP136_020))
> diff --git
> a/target/linux/ar71xx/patches-4.1/700-MIPS-ath79-openwrt-machines.patch
> b/target/linux/ar71xx/patches-4.1/700-MIPS-ath79-openwrt-machines.patch
> index 17cabe1..a82e6b5 100644
> --- a/target/linux/ar71xx/patches-4.1/700-MIPS-ath79-openwrt-machines.patch
> +++ b/target/linux/ar71xx/patches-4.1/700-MIPS-ath79-openwrt-machines.patch
> @@ -1,6 +1,6 @@
> --- a/arch/mips/ath79/machtypes.h
> +++ b/arch/mips/ath79/machtypes.h
> -@@ -16,24 +16,210 @@
> +@@ -16,24 +16,211 @@
>
> enum ath79_mach_type {
> ATH79_MACH_GENERIC = 0,
> @@ -76,6 +76,7 @@
> + ATH79_MACH_MZK_W300NH, /* Planex MZK-W300NH */
> + ATH79_MACH_NBG460N, /* Zyxel NBG460N/550N/550NH */
> + ATH79_MACH_NBG6716, /* Zyxel NBG6716 */
> ++ ATH79_MACH_NBG6616, /* Zyxel NBG6616 */
This is in the wrong order.
> + ATH79_MACH_OM2P_HSv2, /* OpenMesh OM2P-HSv2 */
> + ATH79_MACH_OM2P_HS, /* OpenMesh OM2P-HS */
> + ATH79_MACH_OM2P_LC, /* OpenMesh OM2P-LC */
> @@ -1503,7 +1504,7 @@
> + select ATH79_DEV_WMAC
> +
> +config ATH79_MACH_NBG6716
> -+ bool "Zyxel NBG6716 board support"
> ++ bool "Zyxel NBG6616/NBG6716 board support"
> + select SOC_QCA955X
> + select ATH79_DEV_ETH
> + select ATH79_DEV_GPIO_BUTTONS
> --
> 2.6.2
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
- --
Sent using Mailpile, Free Software from www.mailpile.is
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=QgUJ
-----END PGP SIGNATURE-----
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list