February 2015 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Sun Feb 1 05:59:46 EST 2015
Ending: Sat Feb 28 19:04:45 EST 2015
Messages: 623

• [OpenWrt-Devel] [PATCH] @44360 scripts   .
• [OpenWrt-Devel] [PATCH] b53: Allow to enable/disable port protection for b53 switch   Alexandru Ardelean
• [OpenWrt-Devel] [PATCH] b53: Allow to enable/disable port protection for b53 switch   Alexandru Ardelean
• [OpenWrt-Devel] Proposal: change buildbot's build failure logic to be less restrictive regarding packages from feeds   Alexandru Ardelean
• [OpenWrt-Devel] Maintaining apcupsd-package   Alexandru Ardelean
• [OpenWrt-Devel] [PATCH 1/3] b53: add b53_mac_array_to_u64() utility function   Alexandru Ardelean
• [OpenWrt-Devel] [PATCH 2/3] b53: implement port mirroring feature   Alexandru Ardelean
• [OpenWrt-Devel] [PATCH 3/3] b53: implement ARL Table read/write operations   Alexandru Ardelean
• [OpenWrt-Devel] [PATCH 3/3] b53: implement ARL Table read/write operations   Alexandru Ardelean
• [OpenWrt-Devel] [PATCH 2/3][RESEND] b53: implement port mirroring feature   Alexandru Ardelean
• [OpenWrt-Devel] [PATCH 3/3][RESEND] b53: implement ARL Table read/write operations   Alexandru Ardelean
• [OpenWrt-Devel] [PATCH 1/3] b53: add swconfig logic to enable/disable management   Alexandru Ardelean
• [OpenWrt-Devel] [PATCH 2/3] b53: add logic to handle the broadcom header   Alexandru Ardelean
• [OpenWrt-Devel] [PATCH 3/3] b53: create slave devices for ports   Alexandru Ardelean
• [OpenWrt-Devel] [PATCH 3/3] b53: create slave devices for ports   Alexandru Ardelean
• [OpenWrt-Devel] [PATCH] lldpd: fix init script for multiple interfaces   Alexandru Ardelean
• [OpenWrt-Devel] [PATCH][RESEND] lldpd: fix init script for multiple interfaces   Alexandru Ardelean
• [OpenWrt-Devel] [PATCH] Retry 6rd if wan is down   Steven Barth
• [OpenWrt-Devel] [PATCH] iproute2: bump version from v3.18.0 to v3.19.0   Steven Barth
• [OpenWrt-Devel] [PATCH 3/3] netifd: Set interface device config when device has old settings   Steven Barth
• [OpenWrt-Devel] [PATCH] firewall3: fix null pointer access when no target is present   Steven Barth
• [OpenWrt-Devel] Request for comment: ATH79/AR71XX GPIO IRQ patch   Gerhard Bertelsmann
• [OpenWrt-Devel] Trac-Error / Mailspool seems full   Bastian Bittorf
• [OpenWrt-Devel] looking for a tl-wdr4900 tester   Bastian Bittorf
• [OpenWrt-Devel] looking for a tl-wdr4900 tester   Bastian Bittorf
• [OpenWrt-Devel] Freifunk & GSoC 2015 - Participation and Ideas List   Bastian Bittorf
• [OpenWrt-Devel] Q: understanding entropy/random for SSH-keys   Bastian Bittorf
• [OpenWrt-Devel] procd / crash of PID 1   Bastian Bittorf
• [OpenWrt-Devel] ar71xx update to v3.18   Paul Blazejowski
• [OpenWrt-Devel] ar71xx update to v3.18   Paul Blazejowski
• [OpenWrt-Devel] ar71xx update to v3.18   Paul Blazejowski
• [OpenWrt-Devel] looking for a tl-wdr4900 tester   Philipp Borgers
• [OpenWrt-Devel] Freifunk & GSoC 2015 - Participation and Ideas List   Andreas Bräu
• [OpenWrt-Devel] Ubiquiti Rocket M5 build   Ken Buska
• [OpenWrt-Devel] Ubiquiti Rocket M5 build   Ken Buska
• [OpenWrt-Devel] Ubiquiti Rocket M5 build   Ken Buska
• [OpenWrt-Devel] Ubiquiti Rocket M5 build   Ken Buska
• [OpenWrt-Devel] [PATCH] base-files: default_postinst() fix variable colision   Etienne CHAMPETIER
• [OpenWrt-Devel] Autonegotiation problem on RTL8168evl/8111evl   Catherine
• [OpenWrt-Devel] [PATCH] ramips:Fix mt7612 support for Xiaomi Mini.   Roger Pueyo Centelles
• [OpenWrt-Devel] [PATCH] ramips:Fix mt7612 support for Xiaomi Mini.   Roger Pueyo Centelles
• [OpenWrt-Devel] [PATCH] ramips:Fix mt7612 support for Xiaomi Mini.   Roger Pueyo Centelles
• [OpenWrt-Devel] [PATCH] ramips:Fix mt7612 support for Xiaomi Mini.   Roger Pueyo Centelles
• [OpenWrt-Devel] [PATCH] ramips:Fix mt7612 support for Xiaomi Mini.   Roger Pueyo Centelles
• [OpenWrt-Devel] [PATCH] ramips:Fix mt7612 support for Xiaomi Mini.   Roger Pueyo Centelles
• [OpenWrt-Devel] [PATCH] ar71xx: Add support for MERCURY MAC1200R   Roger Pueyo Centelles
• [OpenWrt-Devel] [PATCH] ar71xx: Add support for MERCURY MAC1200R   Roger Pueyo Centelles
• [OpenWrt-Devel] [PATCH] ar71xx: add mc-mac1200r to do_load_ath10k_board_bin()   Roger Pueyo Centelles
• [OpenWrt-Devel] lantiq v3.18   Roger Pueyo Centelles
• [OpenWrt-Devel] lantiq v3.18   Roger Pueyo Centelles
• [OpenWrt-Devel] hardened openwrt & luci   Etienne Champetier
• [OpenWrt-Devel] hardened openwrt   Etienne Champetier
• [OpenWrt-Devel] hardened openwrt & luci   Etienne Champetier
• [OpenWrt-Devel] zabbix-agentd package not creating rc.d symlink   Etienne Champetier
• [OpenWrt-Devel] hardened openwrt & luci   Etienne Champetier
• [OpenWrt-Devel] zabbix-agentd package not creating rc.d symlink   Etienne Champetier
• [OpenWrt-Devel] Dangerous RPATH in uhttpd, uci, rpcd, ubus   Etienne Champetier
• [OpenWrt-Devel] Dangerous RPATH in uhttpd, uci, rpcd, ubus   Etienne Champetier
• [OpenWrt-Devel] More bad RPATH   Etienne Champetier
• [OpenWrt-Devel] More bad RPATH   Etienne Champetier
• [OpenWrt-Devel] More bad RPATH   Etienne Champetier
• [OpenWrt-Devel] More bad RPATH   Etienne Champetier
• [OpenWrt-Devel] More bad RPATH   Etienne Champetier
• [OpenWrt-Devel] generate/extract .bin from router?   Etienne Champetier
• [OpenWrt-Devel] enabling seccomp by default in kernel   Etienne Champetier
• [OpenWrt-Devel] Q: understanding entropy/random for SSH-keys   Etienne Champetier
• [OpenWrt-Devel] Wireless Router with openwrt, how to use dual band   Robert Clove
• [OpenWrt-Devel] Wireless Router with openwrt, how to use dual band   Robert Clove
• [OpenWrt-Devel] NCM fails to reconnect   Tristan Collins
• [OpenWrt-Devel] [PATCH 2/2] wpj558: use own partition for rootfs   John Crispin
• [OpenWrt-Devel] AsiaRF AWM002 (ramips) USB and reboot broken at r44044   John Crispin
• [OpenWrt-Devel] [PATCH] ralink: remove VHT capabilities when not using 802.11ac   John Crispin
• [OpenWrt-Devel] [PATCH] mac80211: backport rtlwifi fixes from wireless-testing   John Crispin
• [OpenWrt-Devel] [PATCH] package nginx add support for ngx_http_substitutions_filter_module   John Crispin
• [OpenWrt-Devel] AsiaRF AWM002 (ramips) USB and reboot broken at r44044   John Crispin
• [OpenWrt-Devel] [PATCH] ramips: delete unused file   John Crispin
• [OpenWrt-Devel] [PATCH] ramips: delete unused file   John Crispin
• [OpenWrt-Devel] [PATCH] ramips:Fix mt7612 support for Xiaomi Mini.   John Crispin
• [OpenWrt-Devel] [PATCH] ramips:Fix mt7612 support for Xiaomi Mini.   John Crispin
• [OpenWrt-Devel] [PATCH] ramips:Fix mt7612 support for Xiaomi Mini.   John Crispin
• [OpenWrt-Devel] How to fix the unknown in the IWINFO   John Crispin
• [OpenWrt-Devel] [PATCH] ar71xx: ZyXEL NBG6716 leds improvement ( correction - second attempt )   John Crispin
• [OpenWrt-Devel] raspberry pi v3.19   John Crispin
• [OpenWrt-Devel] au1xxx v3.18   John Crispin
• [OpenWrt-Devel] raspberry pi v3.19   John Crispin
• [OpenWrt-Devel] ar7 v3.18   John Crispin
• [OpenWrt-Devel] lantiq v3.18   John Crispin
• [OpenWrt-Devel] More bad RPATH   John Crispin
• [OpenWrt-Devel] More bad RPATH   John Crispin
• [OpenWrt-Devel] raspberry pi v3.19   John Crispin
• [OpenWrt-Devel] lantiq v3.18   John Crispin
• [OpenWrt-Devel] lantiq v3.18   John Crispin
• [OpenWrt-Devel] lantiq v3.18   John Crispin
• [OpenWrt-Devel] raspberry pi v3.19   John Crispin
• [OpenWrt-Devel] au1xxx v3.18   John Crispin
• [OpenWrt-Devel] au1xxx v3.18   John Crispin
• [OpenWrt-Devel] [PATCH] @44360 scripts   John Crispin
• [OpenWrt-Devel] lantiq v3.18   John Crispin
• [OpenWrt-Devel] [PATCH] ar71xx:Add QCA953X version2 SoC support   John Crispin
• [OpenWrt-Devel] raspberry pi v3.19   John Crispin
• [OpenWrt-Devel] raspberry pi v3.19   John Crispin
• [OpenWrt-Devel] lantiq v3.18   John Crispin
• [OpenWrt-Devel] [PATCH 3/3] sunxi: add support for Linux 3.19   John Crispin
• [OpenWrt-Devel] [PATCH 1/4] ipq806x: update target to v3.18   John Crispin
• [OpenWrt-Devel] [PATCH 1/4] ipq806x: update target to v3.18   John Crispin
• [OpenWrt-Devel] raspberry pi v3.19   John Crispin
• [OpenWrt-Devel] [PATCH 3/3] sunxi: add support for Linux 3.19   John Crispin
• [OpenWrt-Devel] [PATCH 2/3] brcm2708: add Raspberry Pi 2 support   John Crispin
• [OpenWrt-Devel] [PATCH 2/3] brcm2708: add Raspberry Pi 2 support   John Crispin
• [OpenWrt-Devel] [PATCH] hostapd: backport BSSID black/whitelists   John Crispin
• [OpenWrt-Devel] [PATCH 3/5] generic: improve kexec support of MIPS.   John Crispin
• [OpenWrt-Devel] Request for testing mtdsplit_uimage   John Crispin
• [OpenWrt-Devel] lantiq v3.18   John Crispin
• [OpenWrt-Devel] looking for a tl-wdr4900 tester   John Crispin
• [OpenWrt-Devel] looking for a tl-wdr4900 tester   John Crispin
• [OpenWrt-Devel] [PATCH 3/5] generic: improve kexec support of MIPS.   John Crispin
• [OpenWrt-Devel] lantiq v3.18   John Crispin
• [OpenWrt-Devel] lantiq v3.18   John Crispin
• [OpenWrt-Devel] [PATCH RFT] kernel: mtdsplit_uimage: debug buf/header sizes   John Crispin
• [OpenWrt-Devel] [PATCH RFT] kernel: mtdsplit_uimage: debug buf/header sizes   John Crispin
• [OpenWrt-Devel] [PATCH RFT] kernel: mtdsplit_uimage: debug buf/header sizes   John Crispin
• [OpenWrt-Devel] Module option in Makefile?   John Crispin
• [OpenWrt-Devel] [PATCH] hostapd: Add client association log file   John Crispin
• [OpenWrt-Devel] [PATCH] hostapd: backport BSSID black/whitelists   John Crispin
• [OpenWrt-Devel] looking for a tl-wdr4900 tester   John Crispin
• [OpenWrt-Devel] lantiq v3.18   John Crispin
• [OpenWrt-Devel] lantiq v3.18   John Crispin
• [OpenWrt-Devel] [PATCH] ramips: add back missing M25P80 flash driver   John Crispin
• [OpenWrt-Devel] enabling seccomp by default in kernel   John Crispin
• [OpenWrt-Devel] ar71xx update to v3.18   John Crispin
• [OpenWrt-Devel] ar71xx update to v3.18   John Crispin
• [OpenWrt-Devel] ar71xx update to v3.18   John Crispin
• [OpenWrt-Devel] ar71xx update to v3.18   John Crispin
• [OpenWrt-Devel] looking for at91 test hardware   John Crispin
• [OpenWrt-Devel] ar71xx update to v3.18   John Crispin
• [OpenWrt-Devel] looking for at91 test hardware   John Crispin
• [OpenWrt-Devel] ar71xx update to v3.18   John Crispin
• [OpenWrt-Devel] ar71xx update to v3.18   John Crispin
• [OpenWrt-Devel] ar71xx update to v3.18   John Crispin
• [OpenWrt-Devel] [PATCH netifd] bridge: allow enabling or disabling the multicast querier independently of IGMP snooping   John Crispin
• [OpenWrt-Devel] [PATCH 0/3] at91: fixes for 3.18 kernel update   John Crispin
• [OpenWrt-Devel] [PATCH] kernel: Fix USB gadget modules for v3.18   John Crispin
• [OpenWrt-Devel] [PATCH v2] ar71xx: TL-WA7210n v2 support   John Crispin
• [OpenWrt-Devel] lantiq v3.18   John Crispin
• [OpenWrt-Devel] lantiq v3.18   John Crispin
• [OpenWrt-Devel] [PATCH] comgt: add hso support   John Crispin
• [OpenWrt-Devel] lantiq v3.18   John Crispin
• [OpenWrt-Devel] [PATCH 1/3] netifd: set current_config for simple devices when parsing device config   Hans Dedecker
• [OpenWrt-Devel] [PATCH 2/3] netifd: Remove unnecessary default_config check in config_parse_interface   Hans Dedecker
• [OpenWrt-Devel] [PATCH 3/3] netifd: Add option to configure base_reachable_time_ms for each device   Hans Dedecker
• [OpenWrt-Devel] [PATCH] map: Fix white space errors   Hans Dedecker
• [OpenWrt-Devel] [RFC] firewall: NAT masquerading race condition   Hans Dedecker
• [OpenWrt-Devel] [RFC] firewall: NAT masquerading race condition   Hans Dedecker
• [OpenWrt-Devel] [PATCH 1/3] netifd: Fix possible hotplug race conditions   Hans Dedecker
• [OpenWrt-Devel] [PATCH 2/3] netifd: Keep reference to a config copy in device type specific reload handler as the original config pointer might go stale   Hans Dedecker
• [OpenWrt-Devel] [PATCH 3/3] netifd: Set interface device config when device has old settings   Hans Dedecker
• [OpenWrt-Devel] [PATCH 3/3] netifd: Set interface device config when device has old settings   Hans Dedecker
• [OpenWrt-Devel] [PATCH] firewall3: fix null pointer access when no target is present   Hans Dedecker
• [OpenWrt-Devel] [PATCH] Fix missing dependencies for libuClibc++.so.0   Sławomir Demeszko
• [OpenWrt-Devel] [PATCH] Fix missing dependencies for libuClibc++.so.0   Sławomir Demeszko
• [OpenWrt-Devel] [PATCH] Fix missing dependencies for libuClibc++.so.0   Sławomir Demeszko
• [OpenWrt-Devel] [PATCH] Fix possible fail to check for dependencies   Sławomir Demeszko
• [OpenWrt-Devel] [PATCH] Fix missing dependencies for libuClibc++.so.0   Sławomir Demeszko
• [OpenWrt-Devel] [PATCH] relayd: add host route on local ip arp request   Alejandro Enrique
• [OpenWrt-Devel] [PATCH] relayd: fix missing -p command line argument   Alejandro Enrique
• [OpenWrt-Devel] [PATCH] relayd: improve host detection on interface change   Alejandro Enrique
• [OpenWrt-Devel] [PATCH] add host route on local ip arp request   Alejandro Enrique
• [OpenWrt-Devel] [PATCH] fix missing -p command line argument   Alejandro Enrique
• [OpenWrt-Devel] [PATCH] improve host detection on interface change   Alejandro Enrique
• [OpenWrt-Devel] [PATCH] add host route on local ip arp request   Alejandro Enrique
• [OpenWrt-Devel] [PATCH relayd] Fix deletion of routing policy rules when terminating due to a signal   Alejandro Enrique
• [OpenWrt-Devel] [PATCH relayd] Add command line argument to disable DHCP options parsing   Alejandro Enrique
• [OpenWrt-Devel] looking for at91 test hardware   Nicolas FERRE
• [OpenWrt-Devel] raspberry pi v3.19   Florian Fainelli
• [OpenWrt-Devel] [PATCH v1 0/7] Add custom TRX header option   Florian Fainelli
• [OpenWrt-Devel] [PATCH v1 0/7] Add custom TRX header option   Florian Fainelli
• [OpenWrt-Devel] [PATCH 3/3] b53: create slave devices for ports   Florian Fainelli
• [OpenWrt-Devel] LED pattern for WIFI - Led trigger   Farid Farid
• [OpenWrt-Devel] I can't receive mail anymore   Farid Farid
• [OpenWrt-Devel] zram-swap or kmod-zram missing dep   Rick Farina
• [OpenWrt-Devel] wiki.openwrt.org uses an invalid security certificate / expired on 12.2.2015 17:18   Alessandro Di Federico
• [OpenWrt-Devel] wiki.openwrt.org uses an invalid security certificate / expired on 12.2.2015 17:18   Alessandro Di Federico
• [OpenWrt-Devel] wiki.openwrt.org uses an invalid security certificate / expired on 12.2.2015 17:18   Alessandro Di Federico
• [OpenWrt-Devel] Macro for selected ABI   Carlos Ferreira
• [OpenWrt-Devel] [PATCH] relayd: add host route on local ip arp request   Felix Fietkau
• [OpenWrt-Devel] [PATCH] add host route on local ip arp request   Felix Fietkau
• [OpenWrt-Devel] [PATCH] brcm2708-gpu-fw: revert to github releases, adapt to bcm2708 target changes and add back InstallDev   Felix Fietkau
• [OpenWrt-Devel] [PATCH] brcm2708-gpu-fw: revert to github releases, adapt to bcm2708 target changes and add back InstallDev   Felix Fietkau
• [OpenWrt-Devel] [PATCH 3/3] netifd: Set interface device config when device has old settings   Felix Fietkau
• [OpenWrt-Devel] [PATCH 3/3] netifd: Set interface device config when device has old settings   Felix Fietkau
• [OpenWrt-Devel] [PATCH 2/2] kernel: Add a selectable option for ar8xxx   Felix Fietkau
• [OpenWrt-Devel] [PATCH 2/3] ipq806x: fix restart   Felix Fietkau
• [OpenWrt-Devel] Q: understanding entropy/random for SSH-keys   Felix Fietkau
• [OpenWrt-Devel] [PATCH] generic: several linux-4.0 fixes   Felix Fietkau
• [OpenWrt-Devel] [PATCH] ar71xx: dir-505: fix reset button gpio active_low value   Rocco Folino
• [OpenWrt-Devel] Alternatives do TDMA   Fernando Frediani
• [OpenWrt-Devel] Alternatives do TDMA   Fernando Frediani
• [OpenWrt-Devel] [PATCH] ar71xx: TL-WA7210n v2 support   Hendrik Frenzel
• [OpenWrt-Devel] [PATCH] ar71xx: TL-WA7210n v2 support   Hendrik Frenzel
• [OpenWrt-Devel] [PATCH v2] ar71xx: TL-WA7210n v2 support   Hendrik Frenzel
• [OpenWrt-Devel] [PATCH v2] ar71xx: TL-WA7210n v2 support   Hendrik Frenzel
• [OpenWrt-Devel] [PATCH v3] ar71xx: TL-WA7210n v2 support   Hendrik Frenzel
• [OpenWrt-Devel] [Cerowrt-devel] [RFC PATCH] packages: Smart Queue Management for AQM Packet Scheduling and Qos from CeroWrt   Luis E. Garcia
• [OpenWrt-Devel] [Cerowrt-devel] [RFC PATCH] packages: Smart Queue Management for AQM Packet Scheduling and Qos from CeroWrt   Luis E. Garcia
• [OpenWrt-Devel] lantiq v3.18   Daniel Gimpelevich
• [OpenWrt-Devel] lantiq v3.18   Daniel Gimpelevich
• [OpenWrt-Devel] lantiq v3.18   Daniel Gimpelevich
• [OpenWrt-Devel] lantiq v3.18   Daniel Gimpelevich
• [OpenWrt-Devel] lantiq v3.18   Daniel Gimpelevich
• [OpenWrt-Devel] lantiq v3.18   Daniel Gimpelevich
• [OpenWrt-Devel] lantiq v3.18   Daniel Gimpelevich
• [OpenWrt-Devel] lantiq v3.18   Daniel Gimpelevich
• [OpenWrt-Devel] lantiq v3.18   Daniel Gimpelevich
• [OpenWrt-Devel] [PATCH] Retry 6rd if wan is down   Daniel Gimpelevich
• [OpenWrt-Devel] [PATCH] ppp: Allow PPTP over a specified interface   Daniel Gimpelevich
• [OpenWrt-Devel] [PATCH v2] ppp: Allow PPTP over a specified interface   Daniel Gimpelevich
• [OpenWrt-Devel] [PATCH] Retry 6rd if wan is down   Daniel Gimpelevich
• [OpenWrt-Devel] lantiq v3.18   Daniel Gimpelevich
• [OpenWrt-Devel] lantiq v3.18   Daniel Gimpelevich
• [OpenWrt-Devel] lantiq v3.18   Daniel Gimpelevich
• [OpenWrt-Devel] [PATCH] Retry 6rd if wan is down   Daniel Gimpelevich
• [OpenWrt-Devel] lantiq v3.18   Daniel Gimpelevich
• [OpenWrt-Devel] lantiq v3.18   Daniel Gimpelevich
• [OpenWrt-Devel] lantiq v3.18   Daniel Gimpelevich
• [OpenWrt-Devel] [PATCH/RFC 1/2] hostapd: update to 2015-02-01 snapshot   Daniel Golle
• [OpenWrt-Devel] [PATCH/RFC 2/2] mac80211: allow encrypted mesh with wpa_supplicant   Daniel Golle
• [OpenWrt-Devel] [PATCH] mac80211: backport rtlwifi fixes from wireless-testing   Daniel Golle
• [OpenWrt-Devel] [PATCH] generic/3.18: update to 3.18.5   Daniel Golle
• [OpenWrt-Devel] [PATCH] oxnas: copy ubinized images to binary folder   Daniel Golle
• [OpenWrt-Devel] b53 switch platform_data vs. device tree   Daniel Golle
• [OpenWrt-Devel] [PATCH] kernel: add missing symbol   Daniel Golle
• [OpenWrt-Devel] [PATCH] oxnas: switch to 3.18   Daniel Golle
• [OpenWrt-Devel] [PATCH 1/3] kernel: 3.19 was released   Daniel Golle
• [OpenWrt-Devel] [PATCH 2/3] kernel: fix patches for 3.19   Daniel Golle
• [OpenWrt-Devel] [PATCH 3/3] sunxi: add support for Linux 3.19   Daniel Golle
• [OpenWrt-Devel] [PATCH v2 1/2] kernel: add version info for 3.19 release   Daniel Golle
• [OpenWrt-Devel] [PATCH 3/3] sunxi: add support for Linux 3.19   Daniel Golle
• [OpenWrt-Devel] [PATCH] oxnas: workaround dwc2 role selection breakage   Daniel Golle
• [OpenWrt-Devel] [PATCH] oxnas: disable usbgadget support   Daniel Golle
• [OpenWrt-Devel] wiki.openwrt.org uses an invalid security certificate / expired on 12.2.2015 17:18   Daniel Golle
• [OpenWrt-Devel] [PATCH] linux/modules: select CONFIG_USB_NET_DRIVERS for kmod-usb-net   Daniel Golle
• [OpenWrt-Devel] ar71xx update to v3.18   Daniel Golle
• [OpenWrt-Devel] [PATCH] oxnas: fix itb generation   Daniel Golle
• [OpenWrt-Devel] [PATCH] linux/generic: enable open by fhandle syscalls   Daniel Golle
• [OpenWrt-Devel] [PATCH] brcm2708: add script for creating SD partitions and one more missing symbol   Daniel Golle
• [OpenWrt-Devel] b53 switch platform_data vs. device tree   Daniel Golle
• [OpenWrt-Devel] [PATCH v2] kernel: Fix USB gadget modules for v3.18   Daniel Golle
• [OpenWrt-Devel] Status of Siemens Gigaset 604 IL (IL)   Daniel Golle
• [OpenWrt-Devel] network/znc: Package binaries appear to be broken by MIPS16   Jonas Gorski
• [OpenWrt-Devel] [PATCH] b53: Allow to enable/disable port protection for b53 switch   Jonas Gorski
• [OpenWrt-Devel] b53 switch platform_data vs. device tree   Jonas Gorski
• [OpenWrt-Devel] [PATCH V3 1/5] brcm63xx: add basic-mmio-gpio DT support   Jonas Gorski
• [OpenWrt-Devel] [PATCH V3 2/5] brcm63xx: prefer DT GPIOs over legacy   Jonas Gorski
• [OpenWrt-Devel] [PATCH V3 3/5] brcm63xx: backport DT spi-gpio no CS   Jonas Gorski
• [OpenWrt-Devel] [PATCH V3 5/5] brcm63xx: register GPIOs through DT   Jonas Gorski
• [OpenWrt-Devel] [PATCH][bcm63xx]: Add DGND3700 v1 / DGND3800B support   Jonas Gorski
• [OpenWrt-Devel] [PATCH 1/3] b53: add b53_mac_array_to_u64() utility function   Jonas Gorski
• [OpenWrt-Devel] [PATCH 2/3][RESEND] b53: implement port mirroring feature   Jonas Gorski
• [OpenWrt-Devel] [PATCH] ar71xx:Add QCA953X version2 SoC support   Chuanhong Guo
• [OpenWrt-Devel] [PATCH] ramips:Fix mt7612 support for Xiaomi Mini.   Chuanhong Guo
• [OpenWrt-Devel] [PATCH 3/3] sunxi: add support for Linux 3.19   Zoltan HERPAI
• [OpenWrt-Devel] ar71xx update to v3.18   Ted Hess
• [OpenWrt-Devel] Maintaining apcupsd-package   Ted Hess
• [OpenWrt-Devel] Weather station package wview upgraded to wview_5.21.7 - please incorporate   Ted Hess
• [OpenWrt-Devel] MI424WR Rev I Hynix NAND Error   James Hilliard
• [OpenWrt-Devel] What should I do if I want to use the RGMII interface on Ralink RT3052?   Mikko Hissa
• [OpenWrt-Devel] What should I do if I want to use the RGMII interface on Ralink RT3052?   Mikko Hissa
• [OpenWrt-Devel] [PATCH 0/2] procd: fix building with latest json-c   William Holland
• [OpenWrt-Devel] [PATCH 1/2] fix building with json-c.0.12   William Holland
• [OpenWrt-Devel] [PATCH 2/2] Fix use of functions deprecated in json-c.0.12   William Holland
• [OpenWrt-Devel] lantiq v3.18   Joerg Hollmann
• [OpenWrt-Devel] Initial support for Mikrotik mAP2n and Mikrotik cAP2n   David Hutchison
• [OpenWrt-Devel] [sqm-scripts] not started at boot?   Toke Høiland-Jørgensen
• [OpenWrt-Devel] [Cerowrt-devel] [sqm-scripts] not started at boot?   Toke Høiland-Jørgensen
• [OpenWrt-Devel] [Cerowrt-devel] [sqm-scripts] not started at boot?   Toke Høiland-Jørgensen
• [OpenWrt-Devel] [PATCH] at71xx: TP-LINK Archer: add 5GHz led entry   Cezary Jackiewicz
• [OpenWrt-Devel] [PATCH] ramips: delete unused file   Cezary Jackiewicz
• [OpenWrt-Devel] [PATCH] lantiq: fix typo in script   Cezary Jackiewicz
• [OpenWrt-Devel] [PATCH] lantiq: td-w8970: fix reset button   Cezary Jackiewicz
• [OpenWrt-Devel] [PATCH] lantiq: td-w8970: fix failsafe mode   Cezary Jackiewicz
• [OpenWrt-Devel] [PATCH] ramips: nexx wt3020: fix status led   Cezary Jackiewicz
• [OpenWrt-Devel] [PATCH] comgt: add hso support   Cezary Jackiewicz
• [OpenWrt-Devel] redis server   Ryan Jacobs
• [OpenWrt-Devel] Lantiq 3.10 (BB) was lantiq v3.18   Joerg Jungermann
• [OpenWrt-Devel] act_connmark in kernel 3.10   Edison Figueira Junior
• [OpenWrt-Devel] [PATCH] scripts: fix getver git dir check   Felix Kaechele
• [OpenWrt-Devel] [PATCH] mpc85xx: add mpic timer clock frequency to avoid boot log warning   Heiner Kallweit
• [OpenWrt-Devel] [PATCH] mpc85xx: add 3.19 support   Heiner Kallweit
• [OpenWrt-Devel] [PATCH v2 0/8] mvebu: Fix flash support and support for A38x   Imre Kaloz
• [OpenWrt-Devel] [PATCH] mvebu: Enable the A385 AP on 3.19   Imre Kaloz
• [OpenWrt-Devel] [PATCH] mvebu: fix WRT1900AC ubinized images   Imre Kaloz
• [OpenWrt-Devel] [PATCH 3/3] ipq806x: add ap148 bootargs to DT   Imre Kaloz
• [OpenWrt-Devel] [PATCH v2] mvebu: set WRT1900AC WAN interface MAC address   Imre Kaloz
• [OpenWrt-Devel] [PATCH 2/2] mvebu: set default WRT1900AC switch config   Imre Kaloz
• [OpenWrt-Devel] Ethernet problem with R8000   Ian Kent
• [OpenWrt-Devel] Status of Siemens Gigaset 604 IL (IL)   Genghis Khan
• [OpenWrt-Devel] Status of Siemens Gigaset 604 IL (IL)   Genghis Khan
• [OpenWrt-Devel] Status of Siemens Gigaset 604 IL (IL)   Genghis Khan
• [OpenWrt-Devel] looking for at91 test hardware   Owen Kirby
• [OpenWrt-Devel] [PATCH] kernel: Fix USB gadget modules for v3.18   Owen Kirby
• [OpenWrt-Devel] [PATCH 0/3] at91: fixes for 3.18 kernel update   Owen Kirby
• [OpenWrt-Devel] [PATCH 1/3] at91: Enable power and reset controller drivers.   Owen Kirby
• [OpenWrt-Devel] [PATCH 2/3] at91: USB gadget subsystem cleanup and driver fix.   Owen Kirby
• [OpenWrt-Devel] [PATCH 3/3] at91: Add dts for Exegin Q5x boards.   Owen Kirby
• [OpenWrt-Devel] [PATCH v2] kernel: Fix USB gadget modules for v3.18   Owen Kirby
• [OpenWrt-Devel] [PATCH v2] kernel: Fix USB gadget modules for v3.18   Owen Kirby
• [OpenWrt-Devel] [PATCH v3] kernel: Fix USB gadget modules for v3.18   Owen Kirby
• [OpenWrt-Devel] x86: kernel update for 3.18   Hans Ulli Kroll
• [OpenWrt-Devel] [PATCH 1/3] x86:refresh patches for 3.18   Hans Ulli Kroll
• [OpenWrt-Devel] [PATCH 2/3] x86:add kenrel config for 3.18   Hans Ulli Kroll
• [OpenWrt-Devel] [PATCH 3/3] x86:switch kernel to 3.18   Hans Ulli Kroll
• [OpenWrt-Devel] wiki.openwrt.org uses an invalid security certificate / expired on 12.2.2015 17:18   Lars Kruse
• [OpenWrt-Devel] Status of new standard ETSI EN 300 328 (ralink)   Zefir Kurtisi
• [OpenWrt-Devel] [PATCH] hostapd: add switch_chan and set_vendor_elements ubus methods   Zefir Kurtisi
• [OpenWrt-Devel] byte counters for IP address using IPTABLES   INYO L
• [OpenWrt-Devel] How to fix the unknown in the IWINFO   INYO L
• [OpenWrt-Devel] [PATCH] dnsmasq: enable pxe-prompt, pxe-service config options   Derek LaHousse
• [OpenWrt-Devel] Weather station package wview upgraded to wview_5.21.7 - please incorporate   Märt Laak
• [OpenWrt-Devel] Module option in Makefile?   Matti Laakso
• [OpenWrt-Devel] lantiq: Fix flash for targets with NO_XIP   Matti Laakso
• [OpenWrt-Devel] lantiq: disable buffered writes on Intel command set flash   Matti Laakso
• [OpenWrt-Devel] [PATCH] comgt: Use TCGETS and TCSETS ioctls for struct termios   Matti Laakso
• [OpenWrt-Devel] NCM fails to reconnect   Matti Laakso
• [OpenWrt-Devel] AsiaRF AWM002 (ramips) USB and reboot broken at r44044   Christian Lamparter
• [OpenWrt-Devel] AsiaRF AWM002 (ramips) USB and reboot broken at r44044   Christian Lamparter
• [OpenWrt-Devel] AsiaRF AWM002 (ramips) USB and reboot broken at r44044   Christian Lamparter
• [OpenWrt-Devel] chance to gather info from a high density deployment   David Lang
• [OpenWrt-Devel] enabling seccomp by default in kernel   David Lang
• [OpenWrt-Devel] General questions about the direction of switch drivers   David Lang
• [OpenWrt-Devel] General questions about the direction of switch drivers   David Lang
• [OpenWrt-Devel] General questions about the direction of switch drivers   David Lang
• [OpenWrt-Devel] General questions about the direction of switch drivers   David Lang
• [OpenWrt-Devel] [PATCH][bcm63xx]: Add DGND3700 v1 / DGND3800B support   David Lang
• [OpenWrt-Devel] [PATCH] mvebu: fix WRT1900AC ubinized images   Claudio Leite
• [OpenWrt-Devel] [PATCH] ramips: rt288x: add missing symbol   Claudio Leite
• [OpenWrt-Devel] [PATCH 1/2] mvebu: set WRT1900AC WAN interface MAC address   Claudio Leite
• [OpenWrt-Devel] [PATCH 2/2] mvebu: set default WRT1900AC switch config   Claudio Leite
• [OpenWrt-Devel] [PATCH 2/2] mvebu: set default WRT1900AC switch config   Claudio Leite
• [OpenWrt-Devel] [PATCH v2] mvebu: set WRT1900AC WAN interface MAC address   Claudio Leite
• [OpenWrt-Devel] [PATCH] openssl: enable ARM assembly acceleration   Claudio Leite
• [OpenWrt-Devel] AsiaRF AWM002 (ramips) USB and reboot broken at r44044   Mingyu Li
• [OpenWrt-Devel] [PATCH] kernel: add ip_vti tunnel module   Luiz Angelo Daros de Luca
• [OpenWrt-Devel] enabling seccomp by default in kernel   Nikos Mavrogiannopoulos
• [OpenWrt-Devel] enabling seccomp by default in kernel   Nikos Mavrogiannopoulos
• [OpenWrt-Devel] enabling seccomp by default in kernel   Nikos Mavrogiannopoulos
• [OpenWrt-Devel] [PATCH] ramips:Fix mt7612 support for Xiaomi Mini.   Gioacchino Mazzurco
• [OpenWrt-Devel] Ubiquiti Rocket M5 build   Gioacchino Mazzurco
• [OpenWrt-Devel] [PATCH 2/2] wpj558: use own partition for rootfs   Christian Mehlis
• [OpenWrt-Devel] [PATCH 1/2] added board support for compex wpj558   Christian Mehlis
• [OpenWrt-Devel] ar71xx update to v3.18   Christian Mehlis
• [OpenWrt-Devel] b53 switch platform_data vs. device tree   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH] ar71xx: ZyXEL NBG6716 led/buttons cleanup   Marcin Mikolajczak
• [OpenWrt-Devel] [PATCH] ar71xx: ZyXEL NBG6716 add gpio usb power on/off   Marcin Mikolajczak
• [OpenWrt-Devel] [PATCH] ar71xx: ZyXEL NBG6716 rfkill switch fix   Marcin Mikolajczak
• [OpenWrt-Devel] [PATCH] ar71xx: ZyXEL NBG6716 leds improvement   Marcin Mikołajczak
• [OpenWrt-Devel] [PATCH] ar71xx: ZyXEL NBG6716 leds improvement ( correction - second attempt )   Marcin Mikołajczak
• [OpenWrt-Devel] [PATCH] ar71xx: ZyXEL NBG6716 leds improvement ( correction - second attempt )   Marcin Mikołajczak
• [OpenWrt-Devel] cmake.mk: ignores package CFLAGS   Rafał Miłecki
• [OpenWrt-Devel] [PATCH 1/3] kernel: 3.19 was released   Rafał Miłecki
• [OpenWrt-Devel] [PATCH 2/3] kernel: fix patches for 3.19   Rafał Miłecki
• [OpenWrt-Devel] [PATCH 3/3] sunxi: add support for Linux 3.19   Rafał Miłecki
• [OpenWrt-Devel] [PATCH v1 0/7] Add custom TRX header option   Rafał Miłecki
• [OpenWrt-Devel] Request for testing mtdsplit_uimage   Rafał Miłecki
• [OpenWrt-Devel] [PATCH RFT] kernel: mtdsplit_uimage: debug buf/header sizes   Rafał Miłecki
• [OpenWrt-Devel] [PATCH RFT] kernel: mtdsplit_uimage: debug buf/header sizes   Rafał Miłecki
• [OpenWrt-Devel] [PATCH RFT] kernel: mtdsplit_uimage: debug buf/header sizes   Rafał Miłecki
• [OpenWrt-Devel] [PATCH] kernel.mk: handle major version dynamically   Rafał Miłecki
• [OpenWrt-Devel] [PATCH] generic: several linux-4.0 fixes   Rafał Miłecki
• [OpenWrt-Devel] [PATCH] generic: several linux-4.0 fixes   Rafał Miłecki
• [OpenWrt-Devel] [PATCH] generic: several linux-4.0 fixes   Rafał Miłecki
• [OpenWrt-Devel] [PATCH 3/3] b53: create slave devices for ports   Rafał Miłecki
• [OpenWrt-Devel] [PATCH][RFT] omap: switch kernel to 3.18   Rafał Miłecki
• [OpenWrt-Devel] [PATCH][RFT] ep93xx: switch kernel to 3.18   Rafał Miłecki
• [OpenWrt-Devel] [PATCH][RFT] mpc52xx: switch kernel to 3.18   Rafał Miłecki
• [OpenWrt-Devel] [PATCH][RFT] adm5120: switch kernel to 3.18   Rafał Miłecki
• [OpenWrt-Devel] [Cerowrt-devel] [sqm-scripts] not started at boot?   Sebastian Moeller
• [OpenWrt-Devel] [Cerowrt-devel] [sqm-scripts] not started at boot?   Sebastian Moeller
• [OpenWrt-Devel] [Cerowrt-devel] [sqm-scripts] not started at boot?   Sebastian Moeller
• [OpenWrt-Devel] [Cerowrt-devel] [sqm-scripts] not started at boot?   Sebastian Moeller
• [OpenWrt-Devel] [PATCH] linux: fix kmod-usb-net-* for >= 3.17   Bjørn Mork
• [OpenWrt-Devel] Status of Siemens Gigaset 604 IL (IL)   Ben Mulvihill
• [OpenWrt-Devel] wiki.openwrt.org uses an invalid security certificate / expired on 12.2.2015 17:18   Constantine A. Murenin
• [OpenWrt-Devel] Google Summer of Code 2015   Nemesis
• [OpenWrt-Devel] hardened openwrt & luci   Dirk Neukirchen
• [OpenWrt-Devel] hardened openwrt & luci   Dirk Neukirchen
• [OpenWrt-Devel] linux/modules: add support for Asix ax88179 USB-Gigabit Ethernet adapters   Dirk Neukirchen
• [OpenWrt-Devel] redis server   Dirk Neukirchen
• [OpenWrt-Devel] Toolchain error on mips64/octeon   Dirk Neukirchen
• [OpenWrt-Devel] Support for DFS 5470 - 5725MHz DFS channels in US?   Dirk Neukirchen
• [OpenWrt-Devel] Hyper-V Support for X86 or X86_64   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH] oxnas: fix itb generation   Dirk Neukirchen
• [OpenWrt-Devel] General questions about the direction of switch drivers   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH] ar71xx: TL-WA7210n v2 support   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH 2/2] kernel: Add a selectable option for ar8xxx   Dirk Neukirchen
• [OpenWrt-Devel] wiki.openwrt.org uses an invalid security certificate / expired on 12.2.2015 17:18   Hannu Nyman
• [OpenWrt-Devel] ar71xx update to v3.18   Hannu Nyman
• [OpenWrt-Devel] [Patch v3 1/4] build: allow openwrt.git packages to be replaced by feeds   Mathieu Olivari
• [OpenWrt-Devel] [Patch v3 2/4] build: propagate override information to .packageinfo   Mathieu Olivari
• [OpenWrt-Devel] [Patch v3 3/4] build: propagate override information to .config file   Mathieu Olivari
• [OpenWrt-Devel] [Patch v3 4/4] base-files: taint the build if the override mechanism is used   Mathieu Olivari
• [OpenWrt-Devel] Porting package, need permanent storage   Mathieu Olivari
• [OpenWrt-Devel] [PATCH 1/4] ipq806x: update target to v3.18   Mathieu Olivari
• [OpenWrt-Devel] [PATCH 2/4] ipq806x: fix SPI read errors   Mathieu Olivari
• [OpenWrt-Devel] [PATCH 3/4] ipq806x: add JFFS2 mark at the end of the squashfs   Mathieu Olivari
• [OpenWrt-Devel] [PATCH 4/4] ipq806x: enable NOR flash support in the kernel config   Mathieu Olivari
• [OpenWrt-Devel] [PATCH 1/3] ipq806x: enable watchdog kernel option   Mathieu Olivari
• [OpenWrt-Devel] [PATCH 2/3] ipq806x: fix restart   Mathieu Olivari
• [OpenWrt-Devel] [PATCH 3/3] ipq806x: add ap148 bootargs to DT   Mathieu Olivari
• [OpenWrt-Devel] [PATCH 0/2] kernel: make ar8216 driver selectable as a package   Mathieu Olivari
• [OpenWrt-Devel] [PATCH 1/2] kernel: rename ar8216.ko into ar8xxx.ko   Mathieu Olivari
• [OpenWrt-Devel] [PATCH 2/2] kernel: Add a selectable option for ar8xxx   Mathieu Olivari
• [OpenWrt-Devel] [PATCH] ipq806x: delete config-3.14 file   Mathieu Olivari
• [OpenWrt-Devel] [PATCH 2/2] kernel: Add a selectable option for ar8xxx   Mathieu Olivari
• [OpenWrt-Devel] [PATCH V2 1/2] ipq806x: enable watchdog kernel option   Mathieu Olivari
• [OpenWrt-Devel] [PATCH V2 2/2] ipq806x: fix "reboot" command   Mathieu Olivari
• [OpenWrt-Devel] [PATCH] ipq806x: fix spi read issues observed with SMP enabled   Mathieu Olivari
• [OpenWrt-Devel] [PATCH 0/4] ipq806x: Add ethernet support   Mathieu Olivari
• [OpenWrt-Devel] [PATCH 1/4] ipq806x: enable ar8xxx switch family support   Mathieu Olivari
• [OpenWrt-Devel] [PATCH 2/4] ipq806x: enable GMAC support in DTS   Mathieu Olivari
• [OpenWrt-Devel] [PATCH 3/4] kernel: add qca-nss-gmac as a new module   Mathieu Olivari
• [OpenWrt-Devel] [PATCH 4/4] ipq806x: initialize the network on AP148   Mathieu Olivari
• [OpenWrt-Devel] looking for a tl-wdr4900 tester   Sami Olmari
• [OpenWrt-Devel] NCM fails to reconnect   Sami Olmari
• [OpenWrt-Devel] [PATCH 2/2] Fix use of functions deprecated in json-c.0.12   Karl Palsson
• [OpenWrt-Devel] [PATCH 1/2] fix building with json-c.0.12   Karl Palsson
• [OpenWrt-Devel] General questions about the direction of switch drivers   Joel Wirāmu Pauling
• [OpenWrt-Devel] [PATCH 1/3] kernel: 3.19 was released   Luka Perkov
• [OpenWrt-Devel] [PATCH 3/3] sunxi: add support for Linux 3.19   Luka Perkov
• [OpenWrt-Devel] lantiq v3.18   Sylwester Petela
• [OpenWrt-Devel] lantiq v3.18   Sylwester Petela
• [OpenWrt-Devel] trying to add support for tp-link mr12u in trunk.   Daniel Petre
• [OpenWrt-Devel] trying to add support for tp-link mr12u in trunk.   Daniel Petre
• [OpenWrt-Devel] [PATCH] ar71xx: Add support for TP-Link MR12U v1 board   Daniel Petre
• [OpenWrt-Devel] [PATCH] ar71xx: Add user-space support for TP-Link MR12U v1   Daniel Petre
• [OpenWrt-Devel] [PATCH] ar71xx: Add profile and build image for TP-Link MR12U v1   Daniel Petre
• [OpenWrt-Devel] [PATCH][v2] ar71xx: Add profile and build image for TP-Link MR12U v1   Daniel Petre
• [OpenWrt-Devel] ar71xx update to v3.18   Daniel Petre
• [OpenWrt-Devel] Looking for consultant for upstream integration of new board   Arvid Picciani
• [OpenWrt-Devel] [PATCH] ramips : Kingston MLW221 and MLWG2 cleanup   L. D. Pinney
• [OpenWrt-Devel] [PATCH] kirkwood: Seagate GoFlex Net   L. D. Pinney
• [OpenWrt-Devel] [PATCH] BB:ramips:Kingston MLW221 cleanup   L. D. Pinney
• [OpenWrt-Devel] [PATCH] BB : kirkwood : Seagate GoFlex Net "Board Name" and cleanup   L. D. Pinney
• [OpenWrt-Devel] [PATCH][v2] BB : kirkwood : Seagate GoFlex Net "Board Name" and cleanup   L. D. Pinney
• [OpenWrt-Devel] [PATCH] mac80211: Force Atheros drivers to respect the user's regdomain settings by default   Jiri Pirko
• [OpenWrt-Devel] wiki.openwrt.org uses an invalid security certificate / expired on 12.2.2015 17:18   Saverio Proto
• [OpenWrt-Devel] Ubiquiti Rocket M5 build   Saverio Proto
• [OpenWrt-Devel] au1xxx v3.18   Bruno Randolf
• [OpenWrt-Devel] ar71xx update to v3.18   Bruno Randolf
• [OpenWrt-Devel] General questions about the direction of switch drivers   Michael Richardson
• [OpenWrt-Devel] General questions about the direction of switch drivers   Michael Richardson
• [OpenWrt-Devel] General questions about the direction of switch drivers   Michael Richardson
• [OpenWrt-Devel] [PATCH v2 0/8] mvebu: Fix flash support and support for A38x   Maxime Ripard
• [OpenWrt-Devel] [PATCH v2 1/8] mvebu: 3.18: Add MTD split framework support   Maxime Ripard
• [OpenWrt-Devel] [PATCH v2 2/8] kernel: Allow ubi autoattach to run on NOR flash   Maxime Ripard
• [OpenWrt-Devel] [PATCH v2 3/8] mvebu: Add sub-profiles   Maxime Ripard
• [OpenWrt-Devel] [PATCH v2 4/8] mvebu: Add large NOR sub-profile implementation   Maxime Ripard
• [OpenWrt-Devel] [PATCH v2 5/8] mvebu: Add a subprofile for boards based on a small NOR   Maxime Ripard
• [OpenWrt-Devel] [PATCH v2 6/8] mvebu: Fix NAND and NOR options   Maxime Ripard
• [OpenWrt-Devel] [PATCH v2 7/8] mvebu: Add the Armada 385 Reference Design support   Maxime Ripard
• [OpenWrt-Devel] [PATCH v2 8/8] mvebu: Add Armada 385 DB AP support   Maxime Ripard
• [OpenWrt-Devel] [PATCH v2 0/8] mvebu: Fix flash support and support for A38x   Maxime Ripard
• [OpenWrt-Devel] [PATCH] mvebu: Enable the A385 AP on 3.19   Maxime Ripard
• [OpenWrt-Devel] raspberry pi v3.19   Álvaro Fernández Rojas
• [OpenWrt-Devel] raspberry pi v3.19   Álvaro Fernández Rojas
• [OpenWrt-Devel] raspberry pi v3.19   Álvaro Fernández Rojas
• [OpenWrt-Devel] raspberry pi v3.19   Álvaro Fernández Rojas
• [OpenWrt-Devel] raspberry pi v3.19   Álvaro Fernández Rojas
• [OpenWrt-Devel] raspberry pi v3.19   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 1/3] brcm2708: remove 3.14 support   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 2/3] brcm2708: add Raspberry Pi 2 support   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 3/3] brcm2708: remove CMA_DEBUG   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 2/3] brcm2708: add Raspberry Pi 2 support   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH] brcm2708-gpu-fw: revert to github releases, adapt to bcm2708 target changes and add back InstallDev   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 1/5] brcm2708: add subtarget copyright and use better board names   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 2/5] brcm2708: add missing config symbols and fix kernel modules for Raspberry Pi 2 by removing local version   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 3/5] brcm2708: refresh patches   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 4/5] brcm2708: fix spidev   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 5/5] brcm2708-gpu-fw: simplify target dependencies   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH] brcm2708-gpu-fw: revert to github releases, adapt to bcm2708 target changes and add back InstallDev   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH] brcm2708-gpu-fw: revert to github releases, adapt to bcm2708 target changes and add back InstallDev   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH] brcm2708-gpu-fw: revert to github releases, adapt to bcm2708 target changes and add back InstallDev   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH] brcm2708: add kmod-hwmon-bcm2835 support and more missing symbols   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 1/3] uci-defaults: add ucidef_set_led_mmc   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 2/3] brcm2708: add board detection and LED support   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 3/3] brcm2708: force uart as the default console for procd and remove nonexistent console   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH] brcm2708: add script for creating SD partitions and one more missing symbol   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH] generic: several linux-4.0 fixes   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH] generic: several linux-4.0 fixes   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH v2 0/3] generic: several linux-4.0 fixes   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH v2 1/3] netfilter: fix nf_nat_redirect dependencies for 3.19 and 4.0   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH v2 2/3] generic: add missing symbols for 4.0   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH v2 3/3] swconfig: fix build with linux 4.0   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 0/3] brcm2708: fix build on OS X   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 1/3] dosfstools: update to v3.0.27   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 2/3] dosfstools: fix build on OS X   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 3/3] brcm2708: fix mkdosfs command line options order   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 1/2] generic: add USB_DWC2 missing symbols   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 2/2] brcm2708: add another missing symbol   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 1/2] brcm63xx: fix image generation and broken patch   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 2/2] brcm63xx: backport and enable DT spi-gpio no CS support   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH v2 2/2] brcm63xx: backport and enable DT spi-gpio no CS support   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH] brcm63xx: fix DTS LEDs and buttons   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH v2] brcm63xx: fix DTS LEDs and buttons   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH] ath5k: fix spontaneus AR5312 freezes   Sergey Ryazanov
• [OpenWrt-Devel] [PATCH] lldpd: fix init script for multiple interfaces   Sergey Ryazanov
• [OpenWrt-Devel] lantiq v3.18   Sylwek ScApi
• [OpenWrt-Devel] elfutils with external toolchain uClibc   Helmut Schaa
• [OpenWrt-Devel] [PATCH] ar71xx: add support for the TP-LINK TL-WR941ND v5   Matthias Schiffer
• [OpenWrt-Devel] [PATCH netifd] bridge: allow enabling or disabling the multicast querier independently of IGMP snooping   Matthias Schiffer
• [OpenWrt-Devel] [PATCH] BusyBox: Netcat 1.10 compatibility require server option   Christian Schoenebeck
• [OpenWrt-Devel] [PATCH] package-defaults.mk: set DISABLE_NLS only if not CONFIG_BUILD_NLS   Christian Schoenebeck
• [OpenWrt-Devel] OpenWrt conference survey   Eric Schultz
• [OpenWrt-Devel] AsiaRF AWM002 (ramips) USB and reboot broken sometime since r43960   Russell Senior
• [OpenWrt-Devel] AsiaRF AWM002 (ramips) USB and reboot broken at r44044   Russell Senior
• [OpenWrt-Devel] AsiaRF AWM002 (ramips) USB and reboot broken at r44044   Russell Senior
• [OpenWrt-Devel] AsiaRF AWM002 (ramips) broken at r44349   Russell Senior
• [OpenWrt-Devel] [PATCH] ramips: add back missing M25P80 flash driver   Russell Senior
• [OpenWrt-Devel] [PATCH] iproute2: bump version from v3.18.0 to v3.19.0   Russell Senior
• [OpenWrt-Devel] [PATCH v1 0/7] Add custom TRX header option   Will Sheppard
• [OpenWrt-Devel] [PATCH v1 1/7] config: Add option to specify custom TRX header   Will Sheppard
• [OpenWrt-Devel] [PATCH v1 2/7] mtd: Add custom trx magic option to mtd tool   Will Sheppard
• [OpenWrt-Devel] [PATCH v1 3/7] mtd: Fix: Use TRX_MAGIC define not hard-coded number   Will Sheppard
• [OpenWrt-Devel] [PATCH v1 4/7] trx: Add custom TRX option to trx firmware tool   Will Sheppard
• [OpenWrt-Devel] [PATCH v1 5/7] mtd: Add debug showing header magic in use   Will Sheppard
• [OpenWrt-Devel] [PATCH v1 6/7] kernel: bcm47xx: Add custom TRX header option to kernel   Will Sheppard
• [OpenWrt-Devel] [PATCH v1 7/7] mtd: Fix makefile to work with quilt as per wiki   Will Sheppard
• [OpenWrt-Devel] [PATCH v1 0/7] Add custom TRX header option   Will Sheppard
• [OpenWrt-Devel] byte counters for IP address using IPTABLES   Charlie Smurthwaite
• [OpenWrt-Devel] General questions about the direction of switch drivers   Charlie Smurthwaite
• [OpenWrt-Devel] General questions about the direction of switch drivers   Charlie Smurthwaite
• [OpenWrt-Devel] General questions about the direction of switch drivers   Charlie Smurthwaite
• [OpenWrt-Devel] General questions about the direction of switch drivers   Charlie Smurthwaite
• [OpenWrt-Devel] [PATCH 3/3] b53: create slave devices for ports   Charlie Smurthwaite
• [OpenWrt-Devel] Porting package, need permanent storage   Antonio Gómez Soto
• [OpenWrt-Devel] 回复： How to fix the unknown in the IWINFO   Soulkey
• [OpenWrt-Devel] [PATCH] Fix missing dependencies for libuClibc++.so.0   John Szakmeister
• [OpenWrt-Devel] [PATCH] Fix missing dependencies for libuClibc++.so.0   John Szakmeister
• [OpenWrt-Devel] GCC download issue...   John Szakmeister
• [OpenWrt-Devel] [PATCH 1/4] kernel: enable AES-NI for x86   Stijn Tintel
• [OpenWrt-Devel] [PATCH 2/4] kernel: enable AES-NI for x86_64   Stijn Tintel
• [OpenWrt-Devel] [PATCH] hostapd: backport BSSID black/whitelists   Stefan Tomanek
• [OpenWrt-Devel] [PATCH] hostapd: backport BSSID black/whitelists   Stefan Tomanek
• [OpenWrt-Devel] [PATCH] dnsmasq: Make parameters optional in dhcpboot config   Stefan Tomanek
• [OpenWrt-Devel] [PATCH 0/4] kernel: x86/x86_64 crypto acceleration   Ulrich Weber
• [OpenWrt-Devel] [PATCH 1/4] kernel: enable AES-NI for x86   Ulrich Weber
• [OpenWrt-Devel] [PATCH 2/4] kernel: enable AES-NI for x86_64   Ulrich Weber
• [OpenWrt-Devel] [PATCH 3/4] kernel: move sha512 to own package   Ulrich Weber
• [OpenWrt-Devel] [PATCH 4/4] kernel: add x86_64 SSSE3 support for SHA1/SHA256/SHA512   Ulrich Weber
• [OpenWrt-Devel] [PATCH v2 0/5] kernel: x86/x86_64 crypto acceleration   Ulrich Weber
• [OpenWrt-Devel] [PATCH 1/5] kernel: add package crypto-cryptd   Ulrich Weber
• [OpenWrt-Devel] [PATCH 2/5] kernel: enable AES-NI for x86   Ulrich Weber
• [OpenWrt-Devel] [PATCH 3/5] kernel: enable AES-NI for x86_64   Ulrich Weber
• [OpenWrt-Devel] [PATCH 4/5] kernel: move sha512 to own package   Ulrich Weber
• [OpenWrt-Devel] [PATCH 5/5] kernel: add x86_64 SSSE3 support for SHA1/SHA256/SHA512   Ulrich Weber
• [OpenWrt-Devel] Support for DFS 5470 - 5725MHz DFS channels in US?   Ben West
• [OpenWrt-Devel] Support for DFS 5470 - 5725MHz DFS channels in US?   Ben West
• [OpenWrt-Devel] byte counters for IP address using IPTABLES   Jo-Philipp Wich
• [OpenWrt-Devel] Dangerous RPATH in uhttpd, uci, rpcd, ubus   Jo-Philipp Wich
• [OpenWrt-Devel] More bad RPATH   Jo-Philipp Wich
• [OpenWrt-Devel] More bad RPATH   Jo-Philipp Wich
• [OpenWrt-Devel] [RFC] firewall: NAT masquerading race condition   Jo-Philipp Wich
• [OpenWrt-Devel] [RFC] firewall: NAT masquerading race condition   Jo-Philipp Wich
• [OpenWrt-Devel] Wireless Router with openwrt, how to use dual band   Aaron Z
• [OpenWrt-Devel] Wireless Router with openwrt, how to use dual band   Aaron Z
• [OpenWrt-Devel] cmake.mk: ignores package CFLAGS   Yousong Zhou
• [OpenWrt-Devel] [PATCH 0/5] Enhancement for kexec of MIPS kernel   Yousong Zhou
• [OpenWrt-Devel] [PATCH 1/5] generic: add a few missing symbols for generic config-3.19.   Yousong Zhou
• [OpenWrt-Devel] [PATCH 2/5] malta: add config file for kernel 3.19.   Yousong Zhou
• [OpenWrt-Devel] [PATCH 3/5] generic: improve kexec support of MIPS.   Yousong Zhou
• [OpenWrt-Devel] [PATCH 4/5] kexec-tools: show up only when KERNEL_KEXEC is enabled.   Yousong Zhou
• [OpenWrt-Devel] [PATCH 5/5] kexec-tools: bump version from v2.0.4 to v2.0.9.   Yousong Zhou
• [OpenWrt-Devel] [PATCH] ar71xx: Add support for TP-Link MR12U v1 board   Yousong Zhou
• [OpenWrt-Devel] [PATCH] generic: fix broken patch in the transition of 3.19 from -rc5 to release .0   Yousong Zhou
• [OpenWrt-Devel] [PATCH 3/5] generic: improve kexec support of MIPS.   Yousong Zhou
• [OpenWrt-Devel] [PATCH 3/5] generic: improve kexec support of MIPS.   Yousong Zhou
• [OpenWrt-Devel] [PATCH] Retry 6rd if wan is down   Yousong Zhou
• [OpenWrt-Devel] [PATCH 1/2] fix building with json-c.0.12   Yousong Zhou
• [OpenWrt-Devel] ar71xx update to v3.18   Michaël Zweers
• [OpenWrt-Devel] ar71xx update to v3.18   Michaël Zweers
• [OpenWrt-Devel] ar71xx update to v3.18   Michaël Zweers
• [OpenWrt-Devel] Alternatives do TDMA   bkil
• [OpenWrt-Devel] Alternatives do TDMA   bkil
• [OpenWrt-Devel] [PATCH][bcm63xx]: Add DGND3700 v1 / DGND3800B support   dani
• [OpenWrt-Devel] [PATCH][bcm63xx]: Add DGND3700 v1 / DGND3800B support   dani
• [OpenWrt-Devel] Maintaining apcupsd-package   kolbrich at dolphin-it.de
• [OpenWrt-Devel] Trunk broken?   smilebef at gmail.com
• [OpenWrt-Devel] [PATCH] ramips: add support for Xiaomi MiWiFi Mini devices   roger.pueyo at guifi.net
• [OpenWrt-Devel] [PATCH] ramips: fix mt76 radio pcie location definition for in Xiaomi MiWiFi Mini   roger.pueyo at guifi.net
• [OpenWrt-Devel] [PATCH] ar71xx: Add support for MERCURY MAC1200R   roger.pueyo at guifi.net
• [OpenWrt-Devel] [PATCH] package nginx add support for ngx_http_substitutions_filter_module   cruze guo
• [OpenWrt-Devel] [PATCH] package nginx add support for ngx_http_substitutions_filter_module   cruze guo
• [OpenWrt-Devel] openwrt support RTL8211CL Gigabit Driver?   ql li
• [OpenWrt-Devel] RT2880/50 RGMII iNIC interface on Ralink RT3052 does?   ql li
• [OpenWrt-Devel] (no subject)   marvie melliza
• [OpenWrt-Devel] [PATCH] ramips: enables rt288x PCIe   ngc-IIJ
• [OpenWrt-Devel] [PATCH] ramips: Buffalo WZR-AGL300NH target support   ngc-IIJ
• [OpenWrt-Devel] wiki.openwrt.org uses an invalid security certificate / expired on 12.2.2015 17:18   phadros
• [OpenWrt-Devel] wiki.openwrt.org uses an invalid security certificate / expired on 12.2.2015 17:18   phaidros
• [OpenWrt-Devel] wiki.openwrt.org uses an invalid security certificate / expired on 12.2.2015 17:18   phaidros
• [OpenWrt-Devel] Failsafe broken on Nexx WT3020   probono
• [OpenWrt-Devel] A5-V11 images are missing in snapshots   probono
• [OpenWrt-Devel] Regarding strongswan UCI support   pothuganti sridhar
• [OpenWrt-Devel] The MT76 Wifi chips are not working properly   fl.service at t-firefly.com
• [OpenWrt-Devel] [PATCH] ralink: remove VHT capabilities when not using 802.11ac   wengbj
• [OpenWrt-Devel] [PATCH] ralink: remove VHT capabilities when not using 802.11ac   wengbj
• [OpenWrt-Devel] ATH9K_htc with option chanbw 10/5 Mhz ?   sp2ong at wp.pl
• [OpenWrt-Devel] [PATCH] ramips:Fix mt7612 support for Xiaomi Mini.   郭传鈜
• [OpenWrt-Devel] [PATCH] ramips:Fix mt7612 support for Xiaomi Mini.   郭传鈜
• [OpenWrt-Devel] [PATCH] ramips:Fix mt7612 support for Xiaomi Mini.   郭传鈜
• [OpenWrt-Devel] [PATCH] ramips:Fix mt7612 support for Xiaomi Mini.   郭传鈜
• [OpenWrt-Devel] [PATCH] ramips:Fix mt7612 support for Xiaomi Mini.   郭传鈜
• [OpenWrt-Devel] [PATCH] ramips:Fix mt7612 support for Xiaomi Mini.   郭传鈜
• [OpenWrt-Devel] [PATCH, v2, RESEND] ramips:Fix mt7612 support for Xiaomi Mini.   郭传鈜
• [OpenWrt-Devel] [PATCH] ramips:Add mt76 node for Lenovo Y1 and Y1S.   郭传鈜
• [OpenWrt-Devel] [PATCH] ar71xx: Add support for MERCURY MAC1200R   郭传鈜
• [OpenWrt-Devel] trying to add support for tp-link mr12u in trunk.   郭传鈜
• [OpenWrt-Devel] trying to add support for tp-link mr12u in trunk.   郭传鈜
• [OpenWrt-Devel] [PATCH] ar71xx: Add support for TP-Link MR12U v1 board   郭传鈜
• [OpenWrt-Devel] What should I do if I want to use the RGMII interface on Ralink RT3052?   郭传鈜
• [OpenWrt-Devel] What should I do if I want to use the RGMII interface on Ralink RT3052?   郭传鈜
• [OpenWrt-Devel] What should I do if I want to use the RGMII interface on Ralink RT3052?   郭传鈜
• [OpenWrt-Devel] What should I do if I want to use the RGMII interface on Ralink RT3052?   郭传鈜
• [OpenWrt-Devel] What should I do if I want to use the RGMII interface on Ralink RT3052?   郭传鈜

Last message date: Sat Feb 28 19:04:45 EST 2015
Archived on: Thu Jun 25 05:56:07 EDT 2020

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...