[OpenWrt-Devel] [PATCH] BB:ramips:Kingston MLW221 cleanup
L. D. Pinney
ldpinney at gmail.com
Tue Feb 10 02:24:55 EST 2015
MLW221 dts use tabs NOT spaces.
Cleanup uci-defaults and diag.sh
Signed-off-by: L. D. Pinney <ldpinney at gmail.com>
---
target/linux/ramips/base-files/etc/diag.sh | 4 +-
target/linux/ramips/base-files/etc/uci-defaults/01_leds | 5 +-
target/linux/ramips/base-files/etc/uci-defaults/02_network | 5 +-
target/linux/ramips/dts/MLW221.dts | 226 +++++++++++++++++++++++++++++++++++++-------------------------------------
4 files changed, 116 insertions(+), 124 deletions(-)
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index bd3779a..74b8867 100755
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -73,9 +73,7 @@ get_status_led() {
m4)
status_led="m4:blue:status"
;;
- mlw221)
- status_led="kingston:blue:status"
- ;;
+ mlw221|\
mlwg2)
status_led="kingston:blue:system"
;;
diff --git a/target/linux/ramips/base-files/etc/uci-defaults/01_leds b/target/linux/ramips/base-files/etc/uci-defaults/01_leds
index f5b5b01..5d6ed2b 100755
--- a/target/linux/ramips/base-files/etc/uci-defaults/01_leds
+++ b/target/linux/ramips/base-files/etc/uci-defaults/01_leds
@@ -113,10 +113,7 @@ case $board in
hw550-3g)
set_usb_led "hw550-3g:green:usb"
;;
- mlw221)
- set_wifi_led "kingston:blue:wifi"
- ucidef_set_led_default "system" "system" "kingston:blue:system" "1"
- ;;
+ mlw221|\
mlwg2)
set_wifi_led "kingston:blue:wifi"
ucidef_set_led_default "system" "system" "kingston:blue:system" "1"
diff --git a/target/linux/ramips/base-files/etc/uci-defaults/02_network b/target/linux/ramips/base-files/etc/uci-defaults/02_network
index 91bedcc..c3ea489 100755
--- a/target/linux/ramips/base-files/etc/uci-defaults/02_network
+++ b/target/linux/ramips/base-files/etc/uci-defaults/02_network
@@ -55,10 +55,7 @@ ramips_setup_interfaces()
ucidef_set_interface_lan "eth0.2"
;;
- mlwg2)
- ucidef_set_interface_lan "eth0.1"
- ;;
-
+ mlwg2 | \
wl-330n | \
wmr300)
ucidef_set_interface_lan "eth0.1"
diff --git a/target/linux/ramips/dts/MLW221.dts b/target/linux/ramips/dts/MLW221.dts
index f220e97..83467dc 100644
--- a/target/linux/ramips/dts/MLW221.dts
+++ b/target/linux/ramips/dts/MLW221.dts
@@ -3,117 +3,117 @@
/include/ "mt7620n.dtsi"
/ {
- compatible = "mlw221", "ralink,mt7620n-soc";
- model = "Kingston MLW221";
-
- palmbus at 10000000 {
- gpio0: gpio at 600 {
- status = "okay";
- };
-
- gpio2: gpio at 660 {
- status = "okay";
- };
-
- gpio3: gpio at 688 {
- status = "okay";
- };
-
- spi at b00 {
- status = "okay";
-
- m25p80 at 0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "s25fl129p1";
- reg = <0 0>;
- linux,modalias = "m25p80", "s25fl129p1";
- spi-max-frequency = <10000000>;
-
- partition at 0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition at 30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition at 40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition at 50000 {
- label = "firmware";
- reg = <0x50000 0xf60000>;
- };
-
- partition at fb0000 {
- label = "user-config";
- reg = <0xfb0000 0x50000>;
-
- };
- };
- };
- };
-
- ehci at 101c0000 {
- status = "okay";
- };
-
- ohci at 101c1000 {
- status = "okay";
- };
-
- ethernet at 10100000 {
- mtd-mac-address = <&factory 0x4>;
- ralink,port-map = "wllll";
- };
-
- wmac at 10180000 {
- ralink,mtd-eeprom = <&factory 0>;
- };
-
- pinctrl {
- state_default: pinctrl0 {
- default {
- ralink,group = "i2c", "ephy", "wled";
- ralink,function = "gpio";
- };
- };
- };
-
- gpio-leds {
- compatible = "gpio-leds";
- system {
- label = "kingston:blue:system";
- gpios = <&gpio2 3 1>;
- };
- wifi {
- label = "kingston:blue:wifi";
- gpios = <&gpio3 0 1>;
- };
- };
-
- gpio-keys-polled {
- compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
- poll-interval = <20>;
- reset {
- label = "reset";
- gpios = <&gpio0 1 1>;
- linux,code = <0x198>;
- };
- system {
- label = "system";
- gpios = <&gpio0 2 1>;
- linux,code = <0x211>;
- };
- };
+ compatible = "mlw221", "ralink,mt7620n-soc";
+ model = "Kingston MLW221";
+
+ palmbus at 10000000 {
+ gpio0: gpio at 600 {
+ status = "okay";
+ };
+
+ gpio2: gpio at 660 {
+ status = "okay";
+ };
+
+ gpio3: gpio at 688 {
+ status = "okay";
+ };
+
+ spi at b00 {
+ status = "okay";
+
+ m25p80 at 0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "s25fl129p1";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "s25fl129p1";
+ spi-max-frequency = <10000000>;
+
+ partition at 0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition at 30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition at 40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition at 50000 {
+ label = "firmware";
+ reg = <0x50000 0xf60000>;
+ };
+
+ partition at fb0000 {
+ label = "user-config";
+ reg = <0xfb0000 0x50000>;
+
+ };
+ };
+ };
+ };
+
+ ehci at 101c0000 {
+ status = "okay";
+ };
+
+ ohci at 101c1000 {
+ status = "okay";
+ };
+
+ ethernet at 10100000 {
+ mtd-mac-address = <&factory 0x4>;
+ ralink,port-map = "wllll";
+ };
+
+ wmac at 10180000 {
+ ralink,mtd-eeprom = <&factory 0>;
+ };
+
+ pinctrl {
+ state_default: pinctrl0 {
+ default {
+ ralink,group = "i2c", "ephy", "wled";
+ ralink,function = "gpio";
+ };
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ system {
+ label = "kingston:blue:system";
+ gpios = <&gpio2 3 1>;
+ };
+ wifi {
+ label = "kingston:blue:wifi";
+ gpios = <&gpio3 0 1>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+ reset {
+ label = "reset";
+ gpios = <&gpio0 1 1>;
+ linux,code = <0x198>;
+ };
+ system {
+ label = "system";
+ gpios = <&gpio0 2 1>;
+ linux,code = <0x211>;
+ };
+ };
};
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list