[OpenWrt-Devel] lantiq v3.18

Roger Pueyo Centelles rogerpueyo at rogerpueyo.com
Sun Feb 22 09:26:24 EST 2015


Hi John,

I tested Linux 3.18.7 on three different lantiq boards (ARV4518PW,
ARV7518PW, ARV7159RW22). Here are the results:

*ARV4518PW*
Boot: Yes (Linux OpenWrt 3.18.7 #1 Sun Feb 22 09:51:57 CET 2015 mips
GNU/Linux)
Ethernet: Yes
Switch: Yes
Wireless: Probably yes¹²
ADSL: Not tested, but interface is shown
USB: Yes
Sysupgrade: Yes


*ARV7518PW*
Boot: Yes (Linux OpenWrt 3.18.7 #1 Sun Feb 22 10:38:15 CET 2015 mips
GNU/Linux)
Ethernet: Yes
Switch: Yes
Wireless: Yes
ADSL:
USB: Yes
Sysupgrade: Yes


*ARV7519RW22*
Boot: No (kernel panic, see ³ and attached dmesg)
Works with 14.07 image.


== 1 ==
[   16.116000] PCI: Enabling device 0000:00:0e.0 (0000 -> 0002)
[   16.120000] ath5k 0000:00:0e.0: registered as 'phy0'
[   16.344000] random: nonblocking pool is initialized
[   17.192000] ath5k: phy0: unable to init EEPROM
[   17.196000] ath5k: probe of 0000:00:0e.0 failed with error -5

== 2 ==
mtd6 partition (boardconfig) was blank (0xFF), probably because of an
accidental erase in the past :(

== 3 ==
[    0.904000] 8021q: 802.1Q VLAN Support v1.8
[    0.908000] UBIFS error (pid 1): ubifs_mount: cannot open "ubi0:rootfs",
error -19
[    0.916000] VFS: Cannot open root device "(null)" or unknown-block(0,0):
error -6
[    0.924000] Please append a correct "root=" boot option; here are the
available partitions:
[    0.932000] Kernel panic - not syncing: VFS: Unable to mount root fs on
unknown-block(0,0)
[    0.932000] ---[ end Kernel panic - not syncing: VFS: Unable to mount
root fs on unknown-block(0,0)
[   33.092000] random: nonblocking pool is initialized


By the way, there are no binary images in snapshots for any of the three
devices.

Roger


2015-02-09 13:30 GMT+01:00 John Crispin <blogic at openwrt.org>:

> Hi,
>
> i bumped the lantiq support to v3.18 and tested it on 6 different
> boards. I have not tested vdsl support due to lack of a vdsl line.
> could someone please do so.
>
> @antii: can you rebase/resnd the dwc2 series ? it does not apply to
> the v3.18 patches
>
>         John
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20150222/1bf28ff8/attachment.htm>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel


More information about the openwrt-devel mailing list