[OpenWrt-Devel] ar71xx update to v3.18

Michaël Zweers admin at gigabyte.getmyip.com
Mon Feb 16 05:05:07 EST 2015


I can confirm that it does work, i don't no where or why it didn't the
previous time. I did a clean clone and used a clean config and now
everything looks to be oké.

Bootlog is attached:
confirmed working:

Boot:		Yes
Ethernet: 	Yes
WiFI: 		Yes
Luci:		Yes (used to scan for wifi)

If you want me to test something else or something specific please let
me know.

John Crispin schreef op 16-2-2015 om 9:10:
> 
> 
> On 16/02/2015 01:17, Michaël Zweers wrote:
>> It builds oke now,
>>
>> but its doesn't boot on my device. i don't get to see any (informative)
>> boot error's (see log).
>>
>>
>>
>> John Crispin schreef op 15-2-2015 om 22:16:
>>>
>>>
>>> On 15/02/2015 21:44, Michaël Zweers wrote:
>>>>
>>>> Hello,
>>>>
>>>> I got a error message (kernel compile log included) when building v3.18
>>>> for wr703n.
>>>>
>>>> If you need additional info let me know.
>>>>
>>>>
>>>
>>> please retry, i just pushed a fix
>>>
> 
> 
> can some one confirm that wr703n fails to boot ? if so i will go to the
> shop today and get one.
> 
-------------- next part --------------
*********************************************
*        U-Boot 1.1.4MGZ MOD_V1  (Jun 24 2014)        *
*********************************************

AP121 (AR9331) U-Boot for TL-WR703N

DRAM:   32 MB DDR 16-bit
FLASH:  Winbond W25Q128 (16 MB)
CLOCKS: 400/400/200/33 MHz (CPU/RAM/AHB/SPI)

LED on during eth initialization...

Hit any key to stop autobooting:  0

Booting image at: 0x9F020000

   Image name:   OpenWrt r44459
   Image type:   MIPS Linux Kernel Image (lzma compressed)
   Data size:    1205952 Bytes = 1.2 MB
   Load address: 0x80060000
   Entry point:  0x80060000

Uncompressing kernel image... OK!
Starting kernel...

[    0.000000] Linux version 3.18.7 (user at HartOfGold) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r44459) ) #1 Mon Feb 16 10:26:18 CET 2015
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
[    0.000000] SoC: Atheros AR9330 rev 1
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 02000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x01ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x01ffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x01ffffff]
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
[    0.000000] Kernel command line:  board=TL-WR703N console=ttyATH0,115200 rootfstype=squashfs,jffs2 noinitrd
[    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Memory: 28324K/32768K available (2627K kernel code, 131K rwdata, 544K rodata, 208K init, 193K bss, 4444K reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:51
[    0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz
[    0.000000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
[    0.080000] pid_max: default: 32768 minimum: 301
[    0.080000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.090000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.100000] NET: Registered protocol family 16
[    0.100000] MIPS: machine is TP-LINK TL-WR703N v1
[    0.380000] Switched to clocksource MIPS
[    0.380000] NET: Registered protocol family 2
[    0.390000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.390000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.390000] TCP: Hash tables configured (established 1024 bind 1024)
[    0.400000] TCP: reno registered
[    0.400000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.410000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.420000] NET: Registered protocol family 1
[    0.420000] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.440000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.440000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.450000] msgmni has been set to 55
[    0.450000] io scheduler noop registered
[    0.460000] io scheduler deadline registered (default)
[    0.460000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    0.470000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11, base_baud = 1562500) is a AR933X UART
[    0.480000] console [ttyATH0] enabled
[    0.480000] console [ttyATH0] enabled
[    0.490000] bootconsole [early0] disabled
[    0.490000] bootconsole [early0] disabled
[    0.500000] m25p80 spi0.0: found w25q128, expected m25p80
[    0.500000] m25p80 spi0.0: w25q128 (16384 Kbytes)
[    0.510000] 5 tp-link partitions found on MTD device spi0.0
[    0.510000] Creating 5 MTD partitions on "spi0.0":
[    0.520000] 0x000000000000-0x000000020000 : "u-boot"
[    0.520000] 0x000000020000-0x0000001468c0 : "kernel"
[    0.530000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[    0.540000] 0x0000001468c0-0x000000ff0000 : "rootfs"
[    0.540000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[    0.560000] mtd: device 2 (rootfs) set to be root filesystem
[    0.560000] 1 squashfs-split partitions found on MTD device rootfs
[    0.570000] 0x0000005a0000-0x000000ff0000 : "rootfs_data"
[    0.580000] 0x000000ff0000-0x000001000000 : "art"
[    0.580000] 0x000000020000-0x000000ff0000 : "firmware"
[    0.620000] libphy: ag71xx_mdio: probed
[    1.220000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY]
[    1.230000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
[    1.230000] TCP: cubic registered
[    1.230000] NET: Registered protocol family 17
[    1.240000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    1.250000] Bridge firewalling registered
[    1.250000] 8021q: 802.1Q VLAN Support v1.8
[    1.270000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[    1.280000] Freeing unused kernel memory: 208K (8039c000 - 803d0000)
procd: Console is alive
procd: - watchdog -
[    4.130000] usbcore: registered new interface driver usbfs
[    4.140000] usbcore: registered new interface driver hub
[    4.140000] usbcore: registered new device driver usb
[    4.150000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.160000] ehci-platform: EHCI generic platform driver
[    4.170000] ehci-platform ehci-platform: EHCI Host Controller
[    4.170000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
[    4.180000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
[    4.210000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
[    4.210000] hub 1-0:1.0: USB hub found
[    4.210000] hub 1-0:1.0: 1 port detected
[    4.220000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    4.230000] ohci-platform: OHCI generic platform driver
procd: - preinit -
[    5.530000] random: mktemp urandom read with 8 bits of entropy available
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
jffs2 is ready
No jffs2 marker was found
[    8.930000] jffs2: notice: (349) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
switching to overlay
procd: - early -
procd: - watchdog -
procd: - ubus -
procd: - init -
Please press Enter to activate this console.
[   11.780000] NET: Registered protocol family 10
[   11.800000] tun: Universal TUN/TAP device driver, 1.6
[   11.800000] tun: (C) 1999-2004 Max Krasnyansky <maxk at qualcomm.com>
[   11.810000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   11.830000] Loading modules backported from Linux version master-2014-11-04-0-gf3660a2
[   11.840000] Backport generated by backports.git backports-20141023-2-g4ff890b
[   11.850000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   11.860000] nf_conntrack version 0.5.0 (445 buckets, 1780 max)
[   11.920000] xt_time: kernel timezone is -0000
[   11.950000] cfg80211: Calling CRDA to update world regulatory domain
[   11.980000] cfg80211: World regulatory domain updated:
[   11.980000] cfg80211:  DFS Master region: unset
[   11.980000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   11.990000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   12.000000] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   12.010000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   12.020000] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   12.030000] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   12.040000] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   12.040000] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   12.050000] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   12.140000] PPP generic driver version 2.4.2
[   12.150000] NET: Registered protocol family 24
[   12.230000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
[   12.230000] cfg80211: Calling CRDA for country: US
[   12.250000] cfg80211: Regulatory domain changed to country: US
[   12.260000] cfg80211:  DFS Master region: FCC
[   12.260000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   12.270000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
[   12.280000] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A)
[   12.290000] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
[   12.300000] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[   12.310000] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
procd: - init complete -
[   24.540000] device eth0 entered promiscuous mode
[   24.550000] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[   24.660000] eth0: link up (10Mbps/Half duplex)
[   24.660000] br-lan: port 1(eth0) entered forwarding state
[   24.670000] br-lan: port 1(eth0) entered forwarding state
[   24.680000] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[   26.670000] br-lan: port 1(eth0) entered forwarding state
[   80.590000] random: nonblocking pool is initialized



BusyBox v1.22.1 (2015-02-16 10:13:57 CET) built-in shell (ash)
Enter 'help' for a list of built-in commands.

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------
 CHAOS CALMER (Bleeding Edge, r44459)
 -----------------------------------------------------
  * 1 1/2 oz Gin            Shake with a glassful
  * 1/4 oz Triple Sec       of broken ice and pour
  * 3/4 oz Lime Juice       unstrained into a goblet.
  * 1 1/2 oz Orange Juice
  * 1 tsp. Grenadine Syrup
 -----------------------------------------------------
root at OpenWrt:/# cat /proc/version
Linux version 3.18.7 (user at HartOfGold) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r44459) ) #1 Mon Feb 16 10:26:18 CET 2015
root at OpenWrt:/#
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20150216/b1e39101/attachment.sig>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel


More information about the openwrt-devel mailing list