[OpenWrt-Devel] [PATCH] kernel: Fix USB gadget modules for v3.18

[John Crispin]

On 19/02/2015 02:54, Owen Kirby wrote:
> The directory layout of the USB gadget subsystem changed between kernels
> 3.14 and
> 3.18, so the makefile for kmod-usb-eth-gadget and kmod-usb-serial-gadget
> need to
> be adjusted to match.
> 

i think this will break 3.14 builds and we should use the new syntax
introduced by jow recently.





> Signed-off-by: Owen Kirby <osk at exegin.com>
> ---
>  package/kernel/linux/modules/usb.mk | 28 ++++++++++++++--------------
>  target/linux/generic/config-3.18    |  1 +
>  2 files changed, 15 insertions(+), 14 deletions(-)
> 
> diff --git a/package/kernel/linux/modules/usb.mk
> b/package/kernel/linux/modules/usb.mk
> index 6faa437..ef58b9d 100644
> --- a/package/kernel/linux/modules/usb.mk
> +++ b/package/kernel/linux/modules/usb.mk
> @@ -254,15 +254,15 @@ define KernelPackage/usb-eth-gadget
>      CONFIG_USB_ETH_RNDIS=y \
>      CONFIG_USB_ETH_EEM=n
>    DEPENDS:=+kmod-usb-gadget +kmod-usb-lib-composite
> -ifneq ($(wildcard $(LINUX_DIR)/drivers/usb/gadget/u_ether.ko),)
> +ifneq ($(wildcard $(LINUX_DIR)/drivers/usb/gadget/function/u_ether.ko),)
>    FILES:= \
> -    $(LINUX_DIR)/drivers/usb/gadget/u_ether.ko \
> -    $(LINUX_DIR)/drivers/usb/gadget/usb_f_ecm.ko \
> -    $(LINUX_DIR)/drivers/usb/gadget/usb_f_ecm_subset.ko \
> -    $(LINUX_DIR)/drivers/usb/gadget/usb_f_rndis.ko \
> -    $(LINUX_DIR)/drivers/usb/gadget/g_ether.ko
> -  ifneq ($(wildcard $(LINUX_DIR)/drivers/usb/gadget/u_rndis.ko),)
> -    FILES+=$(LINUX_DIR)/drivers/usb/gadget/u_rndis.ko
> +    $(LINUX_DIR)/drivers/usb/gadget/function/u_ether.ko \
> +    $(LINUX_DIR)/drivers/usb/gadget/function/usb_f_ecm.ko \
> +    $(LINUX_DIR)/drivers/usb/gadget/function/usb_f_ecm_subset.ko \
> +    $(LINUX_DIR)/drivers/usb/gadget/function/usb_f_rndis.ko \
> +    $(LINUX_DIR)/drivers/usb/gadget/legacy/g_ether.ko
> +  ifneq ($(wildcard $(LINUX_DIR)/drivers/usb/gadget/function/u_rndis.ko),)
> +    FILES+=$(LINUX_DIR)/drivers/usb/gadget/function/u_rndis.ko
>    endif
>    AUTOLOAD:=$(call AutoLoad,52,usb_f_ecm g_ether)
>  else
> @@ -283,13 +283,13 @@ define KernelPackage/usb-serial-gadget
>    TITLE:=USB Serial Gadget support
>    KCONFIG:=CONFIG_USB_G_SERIAL
>    DEPENDS:=+kmod-usb-gadget +kmod-usb-lib-composite
> -ifneq ($(wildcard $(LINUX_DIR)/drivers/usb/gadget/u_serial.ko),)
> +ifneq ($(wildcard $(LINUX_DIR)/drivers/usb/gadget/function/u_serial.ko),)
>    FILES:= \
> -    $(LINUX_DIR)/drivers/usb/gadget/u_serial.ko \
> -    $(LINUX_DIR)/drivers/usb/gadget/usb_f_acm.ko \
> -    $(LINUX_DIR)/drivers/usb/gadget/usb_f_obex.ko \
> -    $(LINUX_DIR)/drivers/usb/gadget/usb_f_serial.ko \
> -    $(LINUX_DIR)/drivers/usb/gadget/g_serial.ko
> +    $(LINUX_DIR)/drivers/usb/gadget/function/u_serial.ko \
> +    $(LINUX_DIR)/drivers/usb/gadget/function/usb_f_acm.ko \
> +    $(LINUX_DIR)/drivers/usb/gadget/function/usb_f_obex.ko \
> +    $(LINUX_DIR)/drivers/usb/gadget/function/usb_f_serial.ko \
> +    $(LINUX_DIR)/drivers/usb/gadget/legacy/g_serial.ko
>    AUTOLOAD:=$(call AutoLoad,52,usb_f_acm g_serial)
>  else
>    FILES:=$(LINUX_DIR)/drivers/usb/gadget/g_serial.ko
> diff --git a/target/linux/generic/config-3.18
> b/target/linux/generic/config-3.18
> index e8ae342..7ad0efc 100644
> --- a/target/linux/generic/config-3.18
> +++ b/target/linux/generic/config-3.18
> @@ -4055,6 +4055,7 @@ CONFIG_USB_EZUSB=y
>  # CONFIG_USB_GADGET_DEBUG_FS is not set
>  CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
>  CONFIG_USB_GADGET_VBUS_DRAW=2
> +# CONFIG_USB_GADGET_XILINX is not set
>  # CONFIG_USB_GL860 is not set
>  # CONFIG_USB_GOKU is not set
>  # CONFIG_USB_GPIO_VBUS is not set
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel