February 2016 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Mon Feb 1 01:59:07 EST 2016
Ending: Mon Feb 29 22:07:06 EST 2016
Messages: 629

• [OpenWrt-Devel] [PATCH] [v3] ar71xx: Support for Ubiquiti UniFi AP AC LITE   Vittorio G (VittGam)
• [OpenWrt-Devel] [PATCH] [v3] ar71xx: Support for Ubiquiti UniFi AP AC LITE   Vittorio G (VittGam)
• [OpenWrt-Devel] patch for ticket 13249   Jeff R. Allen
• [OpenWrt-Devel] patch for ticket 13249   Jeff R. Allen
• [OpenWrt-Devel] LXC is broken on Caos Calmer   Antonio Aloisio
• [OpenWrt-Devel] LXC is broken on Caos Calmer   Antonio Aloisio
• [OpenWrt-Devel] LXC is broken on Caos Calmer   Antonio Aloisio
• [OpenWrt-Devel] [PATCH] sysfixtime and ntpd conflict   Mark Andrews
• [OpenWrt-Devel] [PATCH] dnsmasq: add dhcp relay option   Alexandru Ardelean
• [OpenWrt-Devel] [PATCH] b53: reset vlans data when setting 'enable_vlan'   Alexandru Ardelean
• [OpenWrt-Devel] [PATCH v2] ar71xx: Added support for TL-WA801NDv3   Tiziano Bacocco
• [OpenWrt-Devel] [PATCH] ar71xx: Make code formatting consistent on ath79/machtypes.h   Tiziano Bacocco
• [OpenWrt-Devel] [PATCH] udpxy: don't disable by default   Nerijus Baliunas
• [OpenWrt-Devel] [PATCH] udpxy: don't disable by default   Nerijus Baliunas
• [OpenWrt-Devel] [PATCH] udpxy: don't disable by default   Nerijus Baliūnas
• [OpenWrt-Devel] Logging from Ath9k Code   Nimantha Baranasuriya
• [OpenWrt-Devel] Logging from Ath9k Code   Nimantha Baranasuriya
• [OpenWrt-Devel] [PATCH] [RESEND] [ar71xx] enable PLC support on DHP-1565 board   Basse, Frederic
• [OpenWrt-Devel] [PATCH] [ar71xx] enable PLC support on DHP-1565 board   Frédéric Basse
• [OpenWrt-Devel] [PATCH] ramips: fix WSR-1166 partition table   Lorenzo Bianconi
• [OpenWrt-Devel] [PATCH] libubus: use network order in ubus message header fields   Eyal Birger
• [OpenWrt-Devel] [PATCH v2] ubus: use network order in ubus message header fields   Eyal Birger
• [OpenWrt-Devel] [PATCH v2] ubus: use network order in ubus message header fields   Eyal Birger
• [OpenWrt-Devel] [PATCH v2] ubus: use network order in ubus message header fields   Eyal Birger
• [OpenWrt-Devel] [PATCH v2] ubus: use network order in ubus message header fields   Eyal Birger
• [OpenWrt-Devel] [PATCH v2] ubus: use network order in ubus message header fields   Eyal Birger
• [OpenWrt-Devel] [PATCH v2] ubus: use network order in ubus message header fields   Eyal Birger
• [OpenWrt-Devel] [PATCH v2] ubus: use network order in ubus message header fields   Eyal Birger
• [OpenWrt-Devel] Patchwork patch state mysteriously changed to "Not applicable"   Bastian Bittorf
• [OpenWrt-Devel] erro compiling 'master' with musl   Bastian Bittorf
• [OpenWrt-Devel] [PATCH] dropbear: fix forever hanging startup when jffs2 fails to mount   Bastian Bittorf
• [OpenWrt-Devel] [PATCH] dropbear: fix forever hanging startup when jffs2 fails to mount   Bastian Bittorf
• [OpenWrt-Devel] [PATCH] dropbear: fix forever hanging startup when jffs2 fails to mount   Bastian Bittorf
• [OpenWrt-Devel] erro compiling 'master' with musl   Bastian Bittorf
• [OpenWrt-Devel] [EXPERIMENTAL] [PATCH] package/utils/busybox: Make busybox /bin /sbin so full first in /usr/bin /usr/sbin   Bastian Bittorf
• [OpenWrt-Devel] regex issue / asterisk / musl / sed   Bastian Bittorf
• [OpenWrt-Devel] [PATCH] lantiq: BTHOMEHUBV5A - explicit select the flash device   Martin Blumenstingl
• [OpenWrt-Devel] lantiq/xrx200-net: separate lan and wan ports   Martin Blumenstingl
• [OpenWrt-Devel] [PATCH 0/2 v2] linux: add support of ARC HS38-based boards   Alexey Brodkin
• [OpenWrt-Devel] [PATCH] build: don't add -fno-plt for ARC   Alexey Brodkin
• [OpenWrt-Devel] [PATCH 0/2 v2] linux: add support of ARC HS38-based boards   Alexey Brodkin
• [OpenWrt-Devel] [PATCH 1/2 v2] toolchain: add support of ARCv2 architecture   Alexey Brodkin
• [OpenWrt-Devel] [PATCH 2/2 v2] linux: add support of Synopsys ARCHS38-based boards   Alexey Brodkin
• [OpenWrt-Devel] GSoC 2016: Freifunk ist dabei/Freifunk made it!   Andreas Bräu
• [OpenWrt-Devel] [PATCH 1/1] ramips: fix GPIO names for RT5350F-OLinuXino-EVB   Lorenzo Cafaro
• [OpenWrt-Devel] ISC-DHCP server removed from Chaos Calmer packages, why?   Janne Cederberg
• [OpenWrt-Devel] Multi-wwan and AP only radio0   Etienne Champetier
• [OpenWrt-Devel] svn.openwrt.org down?   Etienne Champetier
• [OpenWrt-Devel] [PATCH] openconnect: add mising liblz4 dependency   Mauro Carvalho Chehab
• [OpenWrt-Devel] [PATCH RESEND] openconnect: add mising liblz4 dependency   Mauro Carvalho Chehab
• [OpenWrt-Devel] Intel Edison port   Baptiste Clenet
• [OpenWrt-Devel] Soletta Project on Openwrt   Baptiste Clenet
• [OpenWrt-Devel] [PATCH 1/3] kernel/gpio_keys: load module on pre-init   Alexander Couzens
• [OpenWrt-Devel] [PATCH 2/3] mpc85xx/tl-wdr4900: correct address of the gpio controller   Alexander Couzens
• [OpenWrt-Devel] [PATCH 3/3] hotplug-preinit: remove superfluous `and`   Alexander Couzens
• [OpenWrt-Devel] [PATCH] [RFC] ar71xx: migrate cpe510 to new build steps   Alexander Couzens
• [OpenWrt-Devel] [PATCH v2 05/11] ltq-vdsl-app: make the dsl_control application stop cleanly   Alexander Couzens
• [OpenWrt-Devel] loading calibration data from UBI volume   John Crispin
• [OpenWrt-Devel] [RFC] replace outdated udev by eudev?   John Crispin
• [OpenWrt-Devel] [RFC] replace outdated udev by eudev?   John Crispin
• [OpenWrt-Devel] [RFC] replace outdated udev by eudev?   John Crispin
• [OpenWrt-Devel] [RFC] replace outdated udev by eudev?   John Crispin
• [OpenWrt-Devel] [PATCH] Added support for TL-WA801NDv3   John Crispin
• [OpenWrt-Devel] [PATCH v4 6/8] ar71xx: WNR2000v3: exclude USB modules from image   John Crispin
• [OpenWrt-Devel] [PATCH RESEND] openconnect: add mising liblz4 dependency   John Crispin
• [OpenWrt-Devel] [PATCH v3] ramips: Add support for Netgear EX2700   John Crispin
• [OpenWrt-Devel] Build error for IPQ806X   John Crispin
• [OpenWrt-Devel] [PATCHv2] ar71xx: add support for the TP-LINK TL-WR1043ND v3   John Crispin
• [OpenWrt-Devel] Native IPv6 Broken in recent trunk   John Crispin
• [OpenWrt-Devel] [PATCH] comgt: NCM protocol propagate defaultroute, peerdns, metric to dynamic ifaces   John Crispin
• [OpenWrt-Devel] patch for ticket 13249   John Crispin
• [OpenWrt-Devel] [PATCH] libubus.h: marking unused variables   John Crispin
• [OpenWrt-Devel] [PATCH] ramips: Support LEDs on D-Link DIR-860L B1   John Crispin
• [OpenWrt-Devel] [PATCH] [v4] ar71xx: Support for Ubiquiti UniFi AP AC LITE   John Crispin
• [OpenWrt-Devel] [PATCH v2] kernel: crypto: add fsl CAAM package   John Crispin
• [OpenWrt-Devel] Patch: Support for TP-Link WR-802N   John Crispin
• [OpenWrt-Devel] [PATCH 2/2] linux/net: Add dependency for crypto echainiv module on 4.4   John Crispin
• [OpenWrt-Devel] [PATCH] fstools: add reusable function for getting fs type txt   John Crispin
• [OpenWrt-Devel] Patchwork patch state mysteriously changed to "Not applicable"   John Crispin
• [OpenWrt-Devel] Patchwork patch state mysteriously changed to "Not applicable"   John Crispin
• [OpenWrt-Devel] [PATCH 2/4] switch: allow Ethernet port LEDs to show specific link speeds only   John Crispin
• [OpenWrt-Devel] [PATCH 3/4] uci: add support for speed_mask to switch LED init scripts   John Crispin
• [OpenWrt-Devel] [PATCH] udpxy: don't disable by default   John Crispin
• [OpenWrt-Devel] [EXPERIMENTAL] [PATCH] base-files busybox: Detect LXC guest and act appropriately   John Crispin
• [OpenWrt-Devel] [PATCH] [ar71xx] enable PLC support on DHP-1565 board   John Crispin
• [OpenWrt-Devel] write/read from mtd ART partition   John Crispin
• [OpenWrt-Devel] [PATCH] lldp: Upgrade to 0.9.0   John Crispin
• [OpenWrt-Devel] [PATCH v4] ramips: Add support for Netgear EX2700   John Crispin
• [OpenWrt-Devel] [PATCH v4] ramips: Add support for Netgear EX2700   John Crispin
• [OpenWrt-Devel] [PATCH v4] ramips: Add support for Netgear EX2700   John Crispin
• [OpenWrt-Devel] [PATCH] [RESEND] [ar71xx] enable PLC support on DHP-1565 board   John Crispin
• [OpenWrt-Devel] [PATCH] dropbear: fix forever hanging startup when jffs2 fails to mount   John Crispin
• [OpenWrt-Devel] [PATCH 1/3] [ar71xx] matchup of TPlink WR841N(D)-names   John Crispin
• [OpenWrt-Devel] [PATCH] [v5] ar71xx: Support for Ubiquiti UniFi AP AC LITE   John Crispin
• [OpenWrt-Devel] [PATCH] sysfixtime and ntpd conflict   John Crispin
• [OpenWrt-Devel] [PATCH] ramips: build factory images for Netgear EX2700   John Crispin
• [OpenWrt-Devel] [PATCH v3] ramips: build factory images for Netgear EX2700   John Crispin
• [OpenWrt-Devel] [PATCH 0/3 v2] ar71xx: fix imagenames for some TPlink units   John Crispin
• [OpenWrt-Devel] [PATCH] [trunk] oldpackages: fix mdk3 build issue   John Crispin
• [OpenWrt-Devel] [PATCH 2/2] Add support for 'metric' to QMI, NCM, MBIM and DirectIP   John Crispin
• [OpenWrt-Devel] [PATCH 4/5] lantiq/xrx200-net: add FID (filtering identifier) setting   John Crispin
• [OpenWrt-Devel] [PATCH 4/5] lantiq/xrx200-net: add FID (filtering identifier) setting   John Crispin
• [OpenWrt-Devel] [PATCH 4/5] lantiq/xrx200-net: add FID (filtering identifier) setting   John Crispin
• [OpenWrt-Devel] block info and DISK_MEDIA_CHANGE events   John Crispin
• [OpenWrt-Devel] A quick note   John Crispin
• [OpenWrt-Devel] [PATCH] [ltq-vdsl-app] Enable T1.413 in xTSE set for Annex A   John Crispin
• [OpenWrt-Devel] [PATCH] NEW FEATURE IP Virtual Server Load Balancer   John Crispin
• [OpenWrt-Devel] [PATCH 2/5] lantiq/xrx200-net: fix PCE_MAPx handling   John Crispin
• [OpenWrt-Devel] [PATCH 1/2] wwan: Add support for CDC (Huawei 'HiLink') Modems   John Crispin
• [OpenWrt-Devel] [PATCH] kernel: mtdsplit: support uimage with UBI   John Crispin
• [OpenWrt-Devel] [PATCH] kernel: mtdsplit: support uimage with UBI   John Crispin
• [OpenWrt-Devel] [PATCH] leds: support oneshot as well as timer triggers   John Crispin
• [OpenWrt-Devel] [PATCH 1/2] wwan: Add support for CDC (Huawei 'HiLink') Modems   John Crispin
• [OpenWrt-Devel] [PATCH] ramips: mt7621: fix WF-2881 for firmware split   John Crispin
• [OpenWrt-Devel] [PATCH 1/2] wwan: Add support for CDC (Huawei 'HiLink') Modems   John Crispin
• [OpenWrt-Devel] [PATCH 1/3] IP Virtual Server - Load Balancer - kernel modules configuration   John Crispin
• [OpenWrt-Devel] [PATCH] package/libs/lzo: update version to 2.09   John Crispin
• [OpenWrt-Devel] [PATCH] ramips: fix wan port on Dovado Tiny AC   John Crispin
• [OpenWrt-Devel] [PATCH 0/3] ar71xx: fix imagenames for some TPlink units   John Crispin
• [OpenWrt-Devel] [PATCH v3] ramips: mt7621: fix WF-2881 for ubi split   John Crispin
• [OpenWrt-Devel] [PATCH] package/libs/lzo: update version to 2.09 (repost)   John Crispin
• [OpenWrt-Devel] [PATCH] [packages] opkg: Make opkg understand old md5   John Crispin
• [OpenWrt-Devel] [PATCH] [ubus 1/2] cli: static keyword tweak   John Crispin
• [OpenWrt-Devel] [PATCH] [ubus 2/2] cli: add timeout support for listen command   John Crispin
• [OpenWrt-Devel] [PATCH 2/3] ar71xx: Add OOLITE profile to the Gainstrong manufacturer profile.   John Crispin
• [OpenWrt-Devel] [PATCH] [packages] opkg: Make opkg understand old md5   John Crispin
• [OpenWrt-Devel] [PATCH 1/2] wwan: Add support for CDC (Huawei 'HiLink') Modems   John Crispin
• [OpenWrt-Devel] [PATCH] comgt: NCM protocol now propagate defaultroute, peerdns, metric to dynamic ifaces   John Crispin
• [OpenWrt-Devel] [PATCH v2] [CC] ar71xx: backport support for TP-LINK TL-WR1043ND v3   John Crispin
• [OpenWrt-Devel] [PATCH] [packages] opkg: Make opkg understand old md5   John Crispin
• [OpenWrt-Devel] [PATCH v2] lantiq, xrx200-net: add devicetree aliases support for port->mac mapping   John Crispin
• [OpenWrt-Devel] [PATCH] dnsmasq: add host-specific lease time option for static hosts   John Crispin
• [OpenWrt-Devel] [PATCH] [ubus 2/2] cli: add timeout support for listen command   John Crispin
• [OpenWrt-Devel] [PATCH 2/5] ltq-vdsl-app: load the vrx200 firmware or patch it   John Crispin
• [OpenWrt-Devel] [PATCH] Ralink RT288x/RT3xxx: Added support for ZBT-826 / ZBT-1026   John Crispin
• [OpenWrt-Devel] Freeradius 3.x For Openwrt !!!   Bruno D'Ambrosio
• [OpenWrt-Devel] Freeradius 3.x For openwrt, Help Please !!   Bruno D'Ambrosio
• [OpenWrt-Devel] Build error for IPQ806X   Tathagata Das
• [OpenWrt-Devel] [PATCH netifd 01/16] device: Fix possible segfault   Hans Dedecker
• [OpenWrt-Devel] [PATCH netifd 02/16] vlan: Fix possible segfault   Hans Dedecker
• [OpenWrt-Devel] [PATCH netifd 03/16] ubus: Fix possible segfault   Hans Dedecker
• [OpenWrt-Devel] [PATCH netifd 04/16] tunnel: Fix uninitialized access   Hans Dedecker
• [OpenWrt-Devel] [PATCH netifd 05/16] tunnel: Fix possible segfault   Hans Dedecker
• [OpenWrt-Devel] [PATCH netifd 06/16] proto: Fix possible buffer overflow due to non null terminated string   Hans Dedecker
• [OpenWrt-Devel] [PATCH netifd 07/16] proto-shell: Fix possible segfault   Hans Dedecker
• [OpenWrt-Devel] [PATCH netifd 08/16] interface: Fix possbile segfault   Hans Dedecker
• [OpenWrt-Devel] [PATCH netifd 09/16] interface-ip: Fix possbile segfaults   Hans Dedecker
• [OpenWrt-Devel] [PATCH netifd 10/16] interface-event: Fix possible out of bounds array access   Hans Dedecker
• [OpenWrt-Devel] [PATCH netifd 11/16] handler: Fix memory leak   Hans Dedecker
• [OpenWrt-Devel] [PATCH netifd 12/16] proto: Fix possible segfaults   Hans Dedecker
• [OpenWrt-Devel] [PATCH netifd 13/16] system-linux: Fix memory leak   Hans Dedecker
• [OpenWrt-Devel] [PATCH netifd 14/16] alias: Fix possible segfault   Hans Dedecker
• [OpenWrt-Devel] [PATCH netifd 15/16] device: Support multicast config option   Hans Dedecker
• [OpenWrt-Devel] [PATCH netifd 16/16] device: Fix null pointer derefence if device is unset   Hans Dedecker
• [OpenWrt-Devel] [PATCH] gre: Support multicast configurable gre interfaces   Hans Dedecker
• [OpenWrt-Devel] [PATCH netifd] interface-ip : Don't handle external addresses and routes   Hans Dedecker
• [OpenWrt-Devel] [PATCH 2/3] packaget/network/services/openvpn: Drop ifconfig/route in favour of ip   Daniel Dickinson
• [OpenWrt-Devel] vnstatd and collectd inconsistency with vlan interfaces   Daniel Dickinson
• [OpenWrt-Devel] vnstatd and collectd inconsistency with vlan interfaces   Daniel Dickinson
• [OpenWrt-Devel] Dropping drop ifconfig/route patches   Daniel Dickinson
• [OpenWrt-Devel] [EXPERIMENTAL] [PATCH] base-files busybox: Detect LXC guest and act appropriately   Daniel Dickinson
• [OpenWrt-Devel] [PATCH 0/8] [RESEND] Allow to build selected set of profile installed of all or one   Daniel Dickinson
• [OpenWrt-Devel] A quick note   Daniel Dickinson
• [OpenWrt-Devel] A quick note   Daniel Dickinson
• [OpenWrt-Devel] Cannot flash UBNT Loco M2   Outback Dingo
• [OpenWrt-Devel] [PATCH 2/3] packaget/network/services/openvpn: Drop ifconfig/route in favour of ip   Gert Doering
• [OpenWrt-Devel] [PATCH] kernel: crypto: add fsl CAAM package   Wojciech Dubowik
• [OpenWrt-Devel] [PATCH] package/libs/lzo: update version to 2.09   Daniel Engberg
• [OpenWrt-Devel] [PATCH] package/libs/libusb: Update to 1.0.20   Daniel Engberg
• [OpenWrt-Devel] [PATCH] package/utils/usbutils: Update USB IDs list   Daniel Engberg
• [OpenWrt-Devel] [PATCH] package/libs/lzo: update version to 2.09 (repost)   Daniel Engberg
• [OpenWrt-Devel] [PATCH] kernel/build: Fix SetNfsCmdline to work with new .config.set   Florian Fainelli
• [OpenWrt-Devel] [PATCH] kernel/build: Fix SetNfsCmdline to work with new .config.set   Florian Fainelli
• [OpenWrt-Devel] [PATCH] kernel/build: Fix SetNfsCmdline to work with new .config.set   Florian Fainelli
• [OpenWrt-Devel] uci_lookup_ptr() seg fault   Farid Farid
• [OpenWrt-Devel] memory leak in procd   Felix Fietkau
• [OpenWrt-Devel] [RFC] replace outdated udev by eudev?   Felix Fietkau
• [OpenWrt-Devel] [PATCH] x86: enable CONFIG_PWM   Felix Fietkau
• [OpenWrt-Devel] [PATCH] Patches to fix kernel panic in Yuncore XD3200 initial commit.   Felix Fietkau
• [OpenWrt-Devel] [PATCH] libubus: use network order in ubus message header fields   Felix Fietkau
• [OpenWrt-Devel] [PATCH][libubox] json_script: add "isdir" support   Felix Fietkau
• [OpenWrt-Devel] [PATCH v2] ubus: use network order in ubus message header fields   Felix Fietkau
• [OpenWrt-Devel] [PATCH v2] ubus: use network order in ubus message header fields   Felix Fietkau
• [OpenWrt-Devel] [PATCH v2] ubus: use network order in ubus message header fields   Felix Fietkau
• [OpenWrt-Devel] [PATCH v2] ubus: use network order in ubus message header fields   Felix Fietkau
• [OpenWrt-Devel] [PATCH v2] ubus: use network order in ubus message header fields   Felix Fietkau
• [OpenWrt-Devel] [PATCH] mac80211: add packages libertas-spi module and firmware   Felix Fietkau
• [OpenWrt-Devel] [PATCH 2/2] Add support for 'metric' to QMI, NCM, MBIM and DirectIP   Felix Fietkau
• [OpenWrt-Devel] [PATCH 2/5] lantiq/xrx200-net: fix PCE_MAPx handling   Felix Fietkau
• [OpenWrt-Devel] [EXPERIMENTAL] [PATCH] package/utils/busybox: Make busybox /bin /sbin so full first in /usr/bin /usr/sbin   Felix Fietkau
• [OpenWrt-Devel] [PATCH 2/5] lantiq/xrx200-net: fix PCE_MAPx handling   Felix Fietkau
• [OpenWrt-Devel] [PATCH] [packages] opkg: Make opkg understand old md5   Felix Fietkau
• [OpenWrt-Devel] [PATCH 1/3] ar71xx: WNR612v2: exclude USB modules from image   Felix Fietkau
• [OpenWrt-Devel] Setting uci defaults in trunk   Felix Fietkau
• [OpenWrt-Devel] Setting uci defaults in trunk   Felix Fietkau
• [OpenWrt-Devel] [PATCH 1/3] ar71xx: WNR612v2: exclude USB modules from image   Felix Fietkau
• [OpenWrt-Devel] [PATCH 1/3] ar71xx: WNR612v2: exclude USB modules from image   Felix Fietkau
• [OpenWrt-Devel] [PATCH 2/5] ltq-vdsl-app: load the vrx200 firmware or patch it   Felix Fietkau
• [OpenWrt-Devel] [PATCH 2/5] ltq-vdsl-app: load the vrx200 firmware or patch it   Felix Fietkau
• [OpenWrt-Devel] [PATCH 2/5] ltq-vdsl-app: load the vrx200 firmware or patch it   Felix Fietkau
• [OpenWrt-Devel] [PATCH v2] ubus: use network order in ubus message header fields   Felix Fietkau
• [OpenWrt-Devel] [PATCH] udev: include missing stdint.h header   Daniel Golle
• [OpenWrt-Devel] [RFC] replace outdated udev by eudev?   Daniel Golle
• [OpenWrt-Devel] [RFC] replace outdated udev by eudev?   Daniel Golle
• [OpenWrt-Devel] [RFC] replace outdated udev by eudev?   Daniel Golle
• [OpenWrt-Devel] [RFC] replace outdated udev by eudev?   Daniel Golle
• [OpenWrt-Devel] LXC is broken on Caos Calmer   Daniel Golle
• [OpenWrt-Devel] LXC is broken on Caos Calmer   Daniel Golle
• [OpenWrt-Devel] [PATCH] uboot-oxnas: fix typo leading to tool not being built   Daniel Golle
• [OpenWrt-Devel] [PATCH] ramips: Add support for Phicomm PSG1208   Chuanhong Guo
• [OpenWrt-Devel] [PATCH] [routing] luci-app-bmx6: make configuration page fail less hard   Bob Ham
• [OpenWrt-Devel] Patchwork patch state mysteriously changed to "Not applicable"   Bob Ham
• [OpenWrt-Devel] Patchwork patch state mysteriously changed to "Not applicable"   Bob Ham
• [OpenWrt-Devel] Patchwork patch state mysteriously changed to "Not applicable"   Bob Ham
• [OpenWrt-Devel] Patchwork patch state mysteriously changed to "Not applicable"   Bob Ham
• [OpenWrt-Devel] GitHub and openwrt.org mailing lists (was: Patchwork patch state mysteriously changed to "Not applicable")   Bob Ham
• [OpenWrt-Devel] GitHub and openwrt.org mailing lists (was: Patchwork patch state mysteriously changed to "Not applicable")   Bob Ham
• [OpenWrt-Devel] memory leak in procd   Amine Aouled Hamed
• [OpenWrt-Devel] Procd: Weird behaviour when adding multiple triggers   Amine Aouled Hamed
• [OpenWrt-Devel] I'd like to donate a Linksys WRT1900AC v1   Alex Henrie
• [OpenWrt-Devel] [PATCH] mac80211: add packages libertas-spi module and firmware   Joseph Honold
• [PATCH] mac80211: add packages libertas-spi module and firmware   Joseph Honold
• [OpenWrt-Devel] [PATCH] mac80211: add packages libertas-spi module and firmware   Joseph Honold
• [OpenWrt-Devel] [PATCH] [packages] util-linux: Subpackage for blkdiscard   Michal Hrusecky
• [OpenWrt-Devel] [PATCH] [packages] opkg: Make opkg understand old md5   Michal Hrusecky
• [OpenWrt-Devel] [PATCH] [packages] opkg: Make opkg understand old md5   Michal Hrusecky
• [OpenWrt-Devel] [PATCH] [packages] opkg: Make opkg understand old md5   Michal Hrusecky
• [OpenWrt-Devel] [PATCH] [packages] opkg: Make opkg understand old md5   Michal Hrusecky
• [OpenWrt-Devel] [PATCH] [packages] opkg: Make opkg understand old md5   Michal Hrusecky
• [OpenWrt-Devel] [PATCH] [packages] opkg: Make opkg understand old md5   Michal Hrusecky
• [OpenWrt-Devel] [PATCH 1/2] wwan: Add support for CDC (Huawei 'HiLink') Modems   Cezary Jackiewicz
• [OpenWrt-Devel] [PATCH] comgt: NCM protocol propagate defaultroute, peerdns, metric to dynamic ifaces   Jakub Janco
• [OpenWrt-Devel] [PATCH] comgt: NCM protocol now propagate defaultroute, peerdns, metric to dynamic ifaces   Jakub Janco
• [OpenWrt-Devel] [PATCH 1/2] wwan: Add support for CDC (Huawei 'HiLink') Modems   Torbjorn Jansson
• [OpenWrt-Devel] downloads.openwrt.org NOT accessible!!!   Jakub Jančo
• [OpenWrt-Devel] downloads.openwrt.org NOT accessible!!!   Jakub Jančo
• [OpenWrt-Devel] [PATCH 2/2] Add support for 'metric' to QMI, NCM, MBIM and DirectIP   Jakub Jančo
• [OpenWrt-Devel] [PATCH 1/2] wwan: Add support for CDC (Huawei 'HiLink') Modems   Jakub Jančo
• [OpenWrt-Devel] Where init scripts are linked to rc.d?   Jakub Jančo
• [OpenWrt-Devel] Where init scripts are linked to rc.d?   Jakub Jančo
• [OpenWrt-Devel] memory leak in procd   Kenneth Johansson
• [OpenWrt-Devel] make -j8 download. fails every time.   Kenneth Johansson
• [OpenWrt-Devel] [PATCH][ar71xx] Routerboard 951G Switch Fix   Baptiste Jonglez
• [OpenWrt-Devel] Any fix ETA or other info on the server hardware problems?   Imre Kaloz
• [OpenWrt-Devel] [PATCH] [RFC] libubus.h: add ubus_auto_shutdown()   Ben Kelly
• [OpenWrt-Devel] [PATCH v4 1/8] mac80211: ath9k: enable platform WLAN LED name   Hartmut Knaack
• [OpenWrt-Devel] [PATCH v4 2/8] mac80211: ath9k: set default state for platform LEDs   Hartmut Knaack
• [OpenWrt-Devel] [PATCH v4 3/8] mac80211: ath9k: show platform MAC address in kernel log if set   Hartmut Knaack
• [OpenWrt-Devel] [PATCH v4 4/8] mac80211: ath9k: enable access to GPIO   Hartmut Knaack
• [OpenWrt-Devel] [PATCH v4 5/8] mac80211: ath9k: enable GPIO buttons   Hartmut Knaack
• [OpenWrt-Devel] [PATCH v4 6/8] ar71xx: WNR2000v3: exclude USB modules from image   Hartmut Knaack
• [OpenWrt-Devel] [PATCH v4 7/8] ar71xx: WNR2000v3: fix for random WLAN MAC   Hartmut Knaack
• [OpenWrt-Devel] [PATCH v4 8/8] ar71xx: WNR2000v3: enable control of all LEDs and buttons   Hartmut Knaack
• [OpenWrt-Devel] [PATCH 2/4] switch: allow Ethernet port LEDs to show specific link speeds only   Hartmut Knaack
• [OpenWrt-Devel] Exceptions are broken in the uClibc++ - any throw causes memory corruption   Ivan Koldaev
• [OpenWrt-Devel] [PATCH] [lantiq] use "-gt" instead of ">" with [ in /lib/functions/lantiq_dsl.sh   Jonathan A. Kollasch
• [OpenWrt-Devel] [PATCH] [ltq-vdsl-app] Enable T1.413 in xTSE set for Annex A   Jonathan A. Kollasch
• [OpenWrt-Devel] [PATCHv2] ltq-vdsl-app: Enable T1.413 in Annex A xTSE set   Jonathan A. Kollasch
• [OpenWrt-Devel] [PATCH] lantiq: fix wrong parameter order in xway_nand driver   Mathias Kresin
• [OpenWrt-Devel] [PATCH] lantiq: BTHOMEHUBV5A - explicit select the flash device   Mathias Kresin
• [OpenWrt-Devel] [PATCH] lantiq: VGV7510KW22/VGV7519 update spi pinmux group   Mathias Kresin
• [OpenWrt-Devel] Command to Disable Reset Button   Lars Kruse
• [OpenWrt-Devel] Native IPv6 Broken in recent trunk   Adam Kuklycz
• [OpenWrt-Devel] Native IPv6 Broken in recent trunk   Adam Kuklycz
• [OpenWrt-Devel] Native IPv6 Broken in recent trunk   Adam Kuklycz
• [OpenWrt-Devel] Native IPv6 Broken in recent trunk   Adam Kuklycz
• [OpenWrt-Devel] Native IPv6 broken in trunk   Adam Kuklycz
• [OpenWrt-Devel] Native IPv6 broken in trunk   Adam Kuklycz
• [OpenWrt-Devel] Native IPv6 broken in trunk   Adam Kuklycz
• [OpenWrt-Devel] [BUG] kernel crash in br_netfilter   Zefir Kurtisi
• [OpenWrt-Devel] [PATCH 1/2] wwan: Add support for CDC (Huawei 'HiLink') Modems   Matti Laakso
• [OpenWrt-Devel] [PATCH 1/2] wwan: Add support for CDC (Huawei 'HiLink') Modems   Matti Laakso
• [OpenWrt-Devel] [PATCH v4] ramips: Add support for Netgear EX2700   Joseph C. Lehner
• [OpenWrt-Devel] [PATCH] CC: ramips: Backport support for Netgear EX2700   Joseph C. Lehner
• [OpenWrt-Devel] ramips: Failsafe switch config broken on (some?) mt7620/mt7621 devices   Joseph C. Lehner
• [OpenWrt-Devel] [PATCH v4] ramips: Add support for Netgear EX2700   Joseph C. Lehner
• [OpenWrt-Devel] [PATCH v4] ramips: Add support for Netgear EX2700   Joseph C. Lehner
• [OpenWrt-Devel] [PATCH] ramips: build factory images for Netgear EX2700   Joseph C. Lehner
• [OpenWrt-Devel] [PATCH v2] ramips: build factory images for Netgear EX2700   Joseph C. Lehner
• [OpenWrt-Devel] [PATCH v3] ramips: build factory images for Netgear EX2700   Joseph C. Lehner
• [OpenWrt-Devel] [PATCH v4] ramips: build factory images for Netgear EX2700   Joseph C. Lehner
• [OpenWrt-Devel] [PATCH v5] ramips: build factory images for Netgear EX2700   Joseph C. Lehner
• [OpenWrt-Devel] [PATCH v6] ramips: build factory images for Netgear EX2700   Joseph C. Lehner
• [OpenWrt-Devel] [PATCH v7] ramips: build factory images for Netgear EX2700   Joseph C. Lehner
• [OpenWrt-Devel] [PATCH] ramips: mt7620: fix failsafe switch config   Joseph C. Lehner
• [OpenWrt-Devel] [PATCH v8] ramips: build factory images for Netgear EX2700   Joseph C. Lehner
• [OpenWrt-Devel] [PATCH v2] CC: ramips: Backport support for Netgear EX2700   Joseph C. Lehner
• [OpenWrt-Devel] [PATCH] ramips: EX2700: remove unused kernel modules   Joseph C. Lehner
• [OpenWrt-Devel] Introducing new IP Virtual Server package and kernel modules   Mauro M.
• [OpenWrt-Devel] WNDR4500 developers   Mauro M.
• [OpenWrt-Devel] [PATCH] CC: toolchain: use latest glibc 2.21 revision   Michael Marley
• [OpenWrt-Devel] Cannot flash UBNT Loco M2   Joseph Marlin
• [OpenWrt-Devel] WNDR4500 developers   Hauke Mehrtens
• [OpenWrt-Devel] Introducing new IP Virtual Server package and kernel modules   Hauke Mehrtens
• [OpenWrt-Devel] [RFC] gcc: update gcc 5 to version 5.3.0   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH 1/5] dsl-vrx200-firmware-xdsl: create Lantiq vrx200 firmware patches   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH 2/5] ltq-vdsl-app: load the vrx200 firmware or patch it   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH 3/5] lantiq: do not set default firmware file   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH 4/5] lantiq: add dsl firmware to default packages   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH 5/5] ltq-vdsl-app: make the dsl_control application stop cleanly.   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH 2/5] ltq-vdsl-app: load the vrx200 firmware or patch it   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH 1/5] base-files: change type of adsl and vdsl to dsl only   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH 2/5] ltq-adsl-app: sync annex option between from VDSL package   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH 3/5] ltq-vdsl-app: sync annex option between from ADSL package   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH 4/5] ltq-vdsl-app: make it possible to configure ADSL/VDSL independently   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH 5/5] ltq-vdsl-app: do not set the reserved bit 4 in the xTSE 8   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH v2 00/11] Lantiq dsl improvements   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH v2 01/11] dsl-vrx200-firmware-xdsl: create Lantiq vrx200 firmware patches   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH v2 02/11] ltq-vdsl-app: load the vrx200 firmware or patch it   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH v2 03/11] lantiq: do not set default firmware file   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH v2 04/11] lantiq: add dsl firmware to default packages   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH v2 05/11] ltq-vdsl-app: make the dsl_control application stop cleanly   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH v2 06/11] base-files: change type of adsl and vdsl to dsl only   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH v2 07/11] ltq-adsl-app: sync annex option between from VDSL package   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH v2 08/11] ltq-vdsl-app: sync annex option between from ADSL package   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH v2 09/11] ltq-vdsl-app: make it possible to configure ADSL/VDSL independently   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH v2 10/11] ltq-vdsl-app: do not set the reserved bit 4 in the xTSE 8   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH v2 11/11] base-files: print profile name in dsl lucistat   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH v2 05/11] ltq-vdsl-app: make the dsl_control application stop cleanly   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH] utils.c: Add ip address validation   Naresh Kumar Mehta
• [OpenWrt-Devel] Logging from Ath9k Code   Michal
• [OpenWrt-Devel] Logging from Ath9k Code   Michal
• [OpenWrt-Devel] [PATCH 1/8] ath9k: enable platform WLAN LED name   Michal
• [OpenWrt-Devel] [PATCH v4 1/8] mac80211: ath9k: enable platform WLAN LED name   Michal
• [OpenWrt-Devel] [PATCH v4 2/8] mac80211: ath9k: set default state for platform LEDs   Michal
• [OpenWrt-Devel] [PATCH v4 3/8] mac80211: ath9k: show platform MAC address in kernel log if set   Michal
• [OpenWrt-Devel] [PATCH v4 4/8] mac80211: ath9k: enable access to GPIO   Michal
• [OpenWrt-Devel] [PATCH v4 5/8] mac80211: ath9k: enable GPIO buttons   Michal
• [OpenWrt-Devel] [PATCH v4 6/8] ar71xx: WNR2000v3: exclude USB modules from image   Michal
• [OpenWrt-Devel] [PATCH v4 7/8] ar71xx: WNR2000v3: fix for random WLAN MAC   Michal
• [OpenWrt-Devel] [PATCH v4 8/8] ar71xx: WNR2000v3: enable control of all LEDs and buttons   Michal
• [OpenWrt-Devel] [PATCH v4 6/8] ar71xx: WNR2000v3: exclude USB modules from image   Michal
• [OpenWrt-Devel] [PATCH v5] ar71xx: WNR2000v3: exclude USB modules from image   Michal
• [OpenWrt-Devel] [PATCH v5 6/8] ar71xx: WNR2000v3: exclude USB modules from image   Michal
• [OpenWrt-Devel] [PATCH 3/4] uci: add support for speed_mask to switch LED init scripts   Michal
• [OpenWrt-Devel] [PATCH 2/4] switch: allow Ethernet port LEDs to show specific link speeds only   Michal
• [OpenWrt-Devel] [PATCH 4/4] ar71xx: WNR2000v3: add speed_mask to Ethernet port LED initialization   Michal
• [OpenWrt-Devel] [PATCH 1/4] switch: make LED port_mask file write handler use kstrtoul() function   Michal
• [OpenWrt-Devel] [PATCH 3/4] uci: add support for speed_mask to switch LED init scripts   Michal
• [OpenWrt-Devel] [PATCH 2/4] switch: allow Ethernet port LEDs to show specific link speeds only   Michal
• [OpenWrt-Devel] [PATCH v2 2/4] switch: allow Ethernet port LEDs to show specific port speeds only   Michal
• [OpenWrt-Devel] [PATCH v2 3/4] uci: add support for speed mask to switch config init scripts   Michal
• [OpenWrt-Devel] [PATCH v5 7/8] ar71xx: WNR2000v3: fix for random WLAN MAC   Michal
• [OpenWrt-Devel] [PATCH v5 8/8] ar71xx: WNR2000v3: enable control of all LEDs and buttons   Michal
• [OpenWrt-Devel] [PATCH v5 5/8] mac80211: ath9k: enable GPIO buttons   Michal
• [OpenWrt-Devel] [PATCH 1/3] ar71xx: WNR612v2: exclude USB modules from image   Michal
• [OpenWrt-Devel] [PATCH 2/3] ar71xx: WNR612v2: fix for random WLAN MAC   Michal
• [OpenWrt-Devel] [PATCH 3/3] ar71xx: WNR612v2: enable control of all LEDs and buttons   Michal
• [OpenWrt-Devel] [PATCH 1/3] ar71xx: WNR612v2: exclude USB modules from image   Michal
• [OpenWrt-Devel] [PATCH 1/3] ar71xx: WNR612v2: exclude USB modules from image   Michal
• [OpenWrt-Devel] [PATCH] mtd: detect image format when writing   Rafał Miłecki
• [OpenWrt-Devel] [PATCH] mtd: fix Seama format after replacing EOF with sysupgrade data   Rafał Miłecki
• [OpenWrt-Devel] [PATCH] udpxy: don't disable by default   Rafał Miłecki
• [OpenWrt-Devel] downloads.openwrt.org NOT accessible!!!   Rafał Miłecki
• [OpenWrt-Devel] [PATCH] [CC] oldpackages: fix mdk3 build issue   Rafał Miłecki
• [OpenWrt-Devel] [PATCH] kernel: mtdsplit: support uimage with UBI   Rafał Miłecki
• [OpenWrt-Devel] [PATCH v3] bcm53xx: add support for Huawei WS880   Rafał Miłecki
• [OpenWrt-Devel] [PATCH v3] bcm53xx: add support for Huawei WS880   Rafał Miłecki
• [OpenWrt-Devel] Cannot flash UBNT Loco M2   Bill Moffitt
• [OpenWrt-Devel] Introducing new IP Virtual Server package and kernel modules   Mauro Mozzarelli
• [OpenWrt-Devel] [PATCH] NEW FEATURE IP Virtual Server Load Balancer   Mauro Mozzarelli
• [OpenWrt-Devel] [PATCH 1/3] IP Virtual Server - Load Balancer   Mauro Mozzarelli
• [OpenWrt-Devel] [PATCH 2/3] IP Virtual Server - Load Balancer - ipvsadm tool   Mauro Mozzarelli
• [OpenWrt-Devel] [PATCH 3/3] IP Virtual Server - Load Balancer - OpenWRT configuration   Mauro Mozzarelli
• [OpenWrt-Devel] [PATCH 3/3] IP Virtual Server - Load Balancer - OpenWRT configuration - IGNORE PREVIOUS   Mauro Mozzarelli
• [OpenWrt-Devel] [PATCH 2/3] IP Virtual Server - Load Balancer - ipvsadm tool   Mauro Mozzarelli
• [OpenWrt-Devel] [PATCH 1/3] IP Virtual Server - Load Balancer - kernel modules configuration   Mauro Mozzarelli
• [OpenWrt-Devel] [PATCH 2/3] IP Virtual Server - Load Balancer - ipvsadm tool package   Mauro Mozzarelli
• [OpenWrt-Devel] [PATCH 3/3] IP Virtual Server - Load Balancer - OpenWrt configuration   Mauro Mozzarelli
• [OpenWrt-Devel] current state of kirkwood target in trunk?   Martin Mueller
• [OpenWrt-Devel] [musl] regex issue / asterisk / musl / sed   Szabolcs Nagy
• [PATCH 1/2] fix * at the start of a BRE subexpression   Szabolcs Nagy
• [PATCH 2/2] fix ^* at the start of a complete BRE   Szabolcs Nagy
• [OpenWrt-Devel] [musl] regex issue / asterisk / musl / sed   Szabolcs Nagy
• [OpenWrt-Devel] [PATCH] video: kmod-pwm does not exist anymore   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH] brcm2708: add missing symbols   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH] x86: enable CONFIG_PWM   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH] kernel: crypto: add fsl CAAM package   Dirk Neukirchen
• [OpenWrt-Devel] ISC-DHCP server removed from Chaos Calmer packages, why?   Hannu Nyman
• [OpenWrt-Devel] [PATCH 1/2] toolchain/gdb: update to 7.10.1   Hannu Nyman
• [OpenWrt-Devel] [PATCH 2/2] package/devel/gdb: update to 7.10.1   Hannu Nyman
• [OpenWrt-Devel] Plans for CC 15.05.1 or DD 16.xx release?   Hannu Nyman
• [OpenWrt-Devel] [PATCH v2] dnsmasq: add host-specific lease time option for static hosts   Hannu Nyman
• [OpenWrt-Devel] [PATCH] dnsmasq: add host-specific lease time option for static hosts   Hannu Nyman
• [OpenWrt-Devel] Any fix ETA or other info on the server hardware problems?   Hannu Nyman
• [OpenWrt-Devel] Any fix ETA or other info on the server hardware problems?   Hannu Nyman
• [OpenWrt-Devel] Multi-wwan and AP only radio0   Okupandolared
• [OpenWrt-Devel] [PATCH 1/2] brcm47xx: Add initial support for Linksys WUMC710   Michał Osowiecki
• [OpenWrt-Devel] [PATCH 2/2] brcm47xx: Add initial support for Linksys WUMC710   Michał Osowiecki
• [OpenWrt-Devel] [PATCH] libubus.h: marking unused variables   Karl Palsson
• [OpenWrt-Devel] [PATCH 3/4] uci: add support for speed_mask to switch LED init scripts   Karl Palsson
• [OpenWrt-Devel] block info and DISK_MEDIA_CHANGE events   Karl Palsson
• [OpenWrt-Devel] block info and DISK_MEDIA_CHANGE events   Karl Palsson
• [OpenWrt-Devel] block: DISK_MEDIA_CHANGE uevents vs add/remove events   Karl Palsson
• [OpenWrt-Devel] [PATCH] leds: support oneshot as well as timer triggers   Karl Palsson
• [OpenWrt-Devel] [PATCHv2] leds: support oneshot as well as timer triggers   Karl Palsson
• [OpenWrt-Devel] Setting uci defaults in trunk   Karl Palsson
• [OpenWrt-Devel] [PATCH] buildroot: improve git submodule handling for packages   Karl Palsson
• [OpenWrt-Devel] LXC is broken on Caos Calmer   Luka Perkov
• [OpenWrt-Devel] [PATCH] [CC] ar71xx: add support for GL devices AR150/AR300/Domino Pi   Tomislav Požega
• [OpenWrt-Devel] [PATCH] [trunk] ar71xx: fix device names in GL-AR150 and GL-AR300 profiles   Tomislav Požega
• [OpenWrt-Devel] [PATCH] [CC] ramips: update Xiaomi MiWiFi Mini .dts profile   Tomislav Požega
• [OpenWrt-Devel] [PATCH] [trunk] ramips: update Xiaomi MiWiFi Mini .dts profile   Tomislav Požega
• [OpenWrt-Devel] [PATCH] [CC] oldpackages: fix mdk3 build issue   Tomislav Požega
• [OpenWrt-Devel] [PATCH] [trunk] oldpackages: fix mdk3 build issue   Tomislav Požega
• [OpenWrt-Devel] [PATCH] [CC] packages: aircrack-ng: fix airmon-ng output in multi bssid mode   Tomislav Požega
• [OpenWrt-Devel] [PATCH] [trunk] packages: aircrack-ng: fix airmon-ng output in multi bssid mode   Tomislav Požega
• [OpenWrt-Devel] [PATCH] ramips: set read-only flag to u-boot partition on Xiaomi MiWiFi Mini   Tom Psyborg
• [OpenWrt-Devel] [PATCH] packages: fix airmon-ng output in multi bssid mode   Tom Psyborg
• [OpenWrt-Devel] [PATCH] ar71xx: fix device names in GL-AR150 and GL-AR300 profiles   Tom Psyborg
• [OpenWrt-Devel] [PATCH] oldpackages: fix mdk3 build issue   Tom Psyborg
• [OpenWrt-Devel] QMI/NCM/MBIM interfaces netifd ifup event too early   Bruno Randolf
• [OpenWrt-Devel] [PATCH 1/2] wwan: Add support for CDC (Huawei 'HiLink') Modems   Bruno Randolf
• [OpenWrt-Devel] [PATCH 2/2] Add support for 'metric' to QMI, NCM, MBIM and DirectIP   Bruno Randolf
• [OpenWrt-Devel] [PATCH 2/2] Add support for 'metric' to QMI, NCM, MBIM and DirectIP   Bruno Randolf
• [OpenWrt-Devel] [PATCH 2/2] Add support for 'metric' to QMI, NCM, MBIM and DirectIP   Bruno Randolf
• [OpenWrt-Devel] [PATCH 1/2] wwan: Add support for CDC (Huawei 'HiLink') Modems   Bruno Randolf
• [OpenWrt-Devel] [PATCH 2/2] QMI/NCM/MBIM/DirectIP: Support defaultroute, peerdns, metric   Bruno Randolf
• [OpenWrt-Devel] [PATCH 1/2] wwan: Add support for CDC (Huawei 'HiLink') Modems   Bruno Randolf
• [OpenWrt-Devel] [PATCH 1/2] wwan: Add support for CDC (Huawei 'HiLink') Modems   Bruno Randolf
• [OpenWrt-Devel] [PATCH 1/2] wwan: Add support for CDC (Huawei 'HiLink') Modems   Bruno Randolf
• [OpenWrt-Devel] [PATCH] kernel: mtdsplit: support uimage with UBI   YounJae Rho
• [OpenWrt-Devel] [PATCH] ramips: mt7621: fix WF-2881 for firmware split   YounJae Rho
• [OpenWrt-Devel] [PATCH v2] kernel: mtdsplit: support uimage with UBI   YounJae Rho
• [OpenWrt-Devel] [PATCH v2] ramips: mt7621: fix WF-2881 for ubi split   YounJae Rho
• [OpenWrt-Devel] [PATCH] ramips: mt7621: fix WF-2881 for firmware split   YounJae Rho
• [OpenWrt-Devel] [PATCH v3] ramips: mt7621: fix WF-2881 for ubi split   YounJae Rho
• [OpenWrt-Devel] embed TEXINFO in the latest trunk as build tool   Arturo Rinaldi
• [OpenWrt-Devel] XORG and PHONE feeds are down   Arturo Rinaldi
• [OpenWrt-Devel] [PATCH] CC: ar71xx: add support for the TP-LINK TL-WR1043ND v3   Sven Roederer
• [OpenWrt-Devel] [PATCH] CC: ar71xx: add support for the TP-LINK TL-WR1043ND v3   Sven Roederer
• [OpenWrt-Devel] [PATCHv2] ar71xx: add support for the TP-LINK TL-WR1043ND v3   Sven Roederer
• [OpenWrt-Devel] [PATCH v2] [CC] ar71xx: backport support for TP-LINK TL-WR1043ND v3   Sven Roederer
• [OpenWrt-Devel] [PATCHv2] ar71xx: add support for the TP-LINK TL-WR1043ND v3   Sven Roederer
• [OpenWrt-Devel] [PATCHv2] ar71xx: add support for the TP-LINK TL-WR1043ND v3   Sven Roederer
• [OpenWrt-Devel] [PATCH 0/3] ar71xx: fix imagenames for some TPlink units   Sven Roederer
• [OpenWrt-Devel] [PATCH 1/3] [ar71xx] matchup of TPlink WR841N(D)-names   Sven Roederer
• [OpenWrt-Devel] [PATCH 2/3] [ar71xx] correct imagename for TPlink WA701ND   Sven Roederer
• [OpenWrt-Devel] [PATCH 3/3] ar71xx: correct imagename for TPlink WA730RE   Sven Roederer
• [OpenWrt-Devel] [PATCH 0/3 v2] ar71xx: fix imagenames for some TPlink units   Sven Roederer
• [OpenWrt-Devel] [PATCH 1/3 v2] ar71xx: matchup of TPlink WR841N(D)-names   Sven Roederer
• [OpenWrt-Devel] [PATCH 2/3 v2] ar71xx: correct imagename for TPlink WA701ND   Sven Roederer
• [OpenWrt-Devel] [PATCH 3/3 v2] ar71xx: correct imagename for TPlink WA730RE   Sven Roederer
• [OpenWrt-Devel] [PATCH 0/3 v2] ar71xx: fix imagenames for some TPlink units   Sven Roederer
• [OpenWrt-Devel] [PATCHv2] [CC-backport] ar71xx: add support for the TP-LINK TL-WR1043ND v3   Sven Roederer
• [OpenWrt-Devel] [PATCH 0/3] ar71xx: fix imagenames for some TPlink units   Sven Roederer
• [OpenWrt-Devel] [PATCH] CC: brcm2708: Fix sysupgrade support for Raspberry Pi   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 1/3] brcm2708: switch to linux 4.4 and update patches   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 2/3] brcm2708: remove linux 4.1 support   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 3/3] brcm2708-gpu-fw: update to latest version   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH v2 1/3] brcm2708: switch to linux 4.4 and update patches   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH v2 2/3] brcm2708: remove linux 4.1 support   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH v2 3/3] brcm2708-gpu-fw: update to latest version   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH] CC: brcm2708-gpu-fw: move pkg build dir to kernel build dir to fix rebuild bugs after cleaning the kernel tree   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 1/2] brcm63xx/lzma-loader: fix O32 ABI conformance   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 2/2] brcm63xx: fix BCM3368 interrupt controller addresses   Álvaro Fernández Rojas
• [OpenWrt-Devel] [RFC 0/4] Add support for Raspberry Pi 3   Álvaro Fernández Rojas
• [OpenWrt-Devel] [RFC 1/4] include: add Cortex-A53 CPU_TYPE   Álvaro Fernández Rojas
• [OpenWrt-Devel] [RFC 2/4] brcm2708-gpu-fw: update to latest version   Álvaro Fernández Rojas
• [OpenWrt-Devel] [RFC 3/4] brcm2708: update linux 4.4 patches to latest version   Álvaro Fernández Rojas
• [OpenWrt-Devel] [RFC 4/4] brcm2708: add Raspberry Pi 3 support   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH] brcm63xx: Add USB Support for D-Link DSL-2750 B1   Ahmed Saidi
• [OpenWrt-Devel] [PATCH] brcm63xx: Add USB Support for D-Link DSL-2750 B1   Ahmed Saidi
• [OpenWrt-Devel] [PATCH] CC: ar71xx: add support for the TP-LINK TL-WR1043ND v3   Matthias Schiffer
• [OpenWrt-Devel] Weird ethernet setup on DIR-505   Matthias Schiffer
• [OpenWrt-Devel] [PATCH 1/3] firmware-utils: mkfwimage: add -Wall, fix obvious bugs causing compile warnings   Matthias Schiffer
• [OpenWrt-Devel] [PATCH 2/3] ar71xx, firmware-utils: split ubdev01 flash layout from XM   Matthias Schiffer
• [OpenWrt-Devel] [PATCH 3/3] firmware-utils: mkfwimage: fix firmware_max_length for XM layout   Matthias Schiffer
• [OpenWrt-Devel] [PATCH CC] kernel: take bcm47xx_nvram.h from kernel and not backports   Matthias Schiffer
• [OpenWrt-Devel] [PATCH CC 00/32] The CC backport wishlist   Matthias Schiffer
• [OpenWrt-Devel] [PATCH CC 01/32] ar71xx: add support for tp-link wr740n v5.0 (EU)   Matthias Schiffer
• [OpenWrt-Devel] [PATCH CC 02/32] ar71xx: add support for TL-WR741ND v5   Matthias Schiffer
• [OpenWrt-Devel] [PATCH CC 03/32] sunxi: don't copy DTS files to BIN_DIR   Matthias Schiffer
• [OpenWrt-Devel] [PATCH CC 04/32] sunxi: fix uboot install location   Matthias Schiffer
• [OpenWrt-Devel] [PATCH CC 05/32] sunxi: respect CONFIG_TARGET_IMAGES_GZIP   Matthias Schiffer
• [OpenWrt-Devel] [PATCH CC 06/32] odhcp6c: add option "sourcefilter" to disable source filter   Matthias Schiffer
• [OpenWrt-Devel] [PATCH CC 07/32] base-files: default_postinst: propagate the real postinst return code   Matthias Schiffer
• [OpenWrt-Devel] [PATCH CC 08/32] odhcp6c: minor fixes   Matthias Schiffer
• [OpenWrt-Devel] [PATCH CC 09/32] tools/firmware-utils: tplink-safeloader: clean up code   Matthias Schiffer
• [OpenWrt-Devel] [PATCH CC 10/32] tools/firmware-utils: tplink-safeloader: fix support-list format, clean up vendor information   Matthias Schiffer
• [OpenWrt-Devel] [PATCH CC 11/32] tools/firmware-utils: tplink-safeloader: add version 1.1 support to CPE210/220/510/520   Matthias Schiffer
• [OpenWrt-Devel] [PATCH CC 12/32] ar71xx: add support for the TP-LINK TL-WR1043ND v3   Matthias Schiffer
• [OpenWrt-Devel] [PATCH CC 13/32] ar71xx: fix AR71XX_MODEL on TP-Link TL-WR703N   Matthias Schiffer
• [OpenWrt-Devel] [PATCH CC 14/32] OpenSSL: Added source/old to PKG_SOURCE_URL   Matthias Schiffer
• [OpenWrt-Devel] [PATCH CC 15/32] firmware-utils: mkfwimage: add -Wall, fix obvious bugs causing compile warnings   Matthias Schiffer
• [OpenWrt-Devel] [PATCH CC 16/32] ar71xx, firmware-utils: split ubdev01 flash layout from XM   Matthias Schiffer
• [OpenWrt-Devel] [PATCH CC 17/32] firmware-utils: mkfwimage: fix firmware_max_length for XM layout   Matthias Schiffer
• [OpenWrt-Devel] [PATCH CC 18/32] kernel: disable software protection bits for macronix flash chips at init   Matthias Schiffer
• [OpenWrt-Devel] [PATCH CC 19/32] brcm2708-gpu-fw: move pkg build dir to kernel build dir to fix rebuild bugs after cleaning the kernel tree   Matthias Schiffer
• [OpenWrt-Devel] [PATCH CC 20/32] kernel/gpio_keys: load module on pre-init   Matthias Schiffer
• [OpenWrt-Devel] [PATCH CC 21/32] ar71xx/lzma-loader: fix O32 ABI conformance   Matthias Schiffer
• [OpenWrt-Devel] [PATCH CC 22/32] ar71xx: fix ethernet initialization on QCA953x-based boards (TP-Link TL-WR841N/ND v9, Compex WPJ531)   Matthias Schiffer
• [OpenWrt-Devel] [PATCH CC 23/32] ar71xx: rework patch for qca953x/956x   Matthias Schiffer
• [OpenWrt-Devel] [PATCH CC 24/32] ar71xx: compex wpj531 fix ethernet registration   Matthias Schiffer
• [OpenWrt-Devel] [PATCH CC 25/32] ar71xx: compex wpj531 fix setting mac address on ethernet   Matthias Schiffer
• [OpenWrt-Devel] [PATCH CC 26/32] ar71xx: compex wpj531 register usb support   Matthias Schiffer
• [OpenWrt-Devel] [PATCH CC 27/32] mac80211: set mcast-rate for mesh point interfaces   Matthias Schiffer
• [OpenWrt-Devel] [PATCH CC 28/32] ar71xx: rename firmware for Chinese version of TL-WR941ND v6   Matthias Schiffer
• [OpenWrt-Devel] [PATCH CC 29/32] ar71xx: add support for TP-LINK TL-WR941ND v6 (international version)   Matthias Schiffer
• [OpenWrt-Devel] [PATCH CC 30/32] x86/generic: enable pata_atiixp driver   Matthias Schiffer
• [OpenWrt-Devel] [PATCH CC 31/32] base-files: add /etc/profile.d support   Matthias Schiffer
• [OpenWrt-Devel] [PATCH CC 32/32] kernel: add Realtek USB to Ethernet modules   Matthias Schiffer
• [OpenWrt-Devel] lantiq/xrx200-net: separate lan and wan ports   Martin Schiller
• [OpenWrt-Devel] lantiq/xrx200-net: separate lan and wan ports   Martin Schiller
• [OpenWrt-Devel] lantiq/xrx200-net: separate lan and wan ports   Martin Schiller
• [OpenWrt-Devel] [PATCH 1/5] lantiq/xrx200-net: Add support for eth0 as WAN interface if the SW_PORTMAP is disabled   Martin Schiller
• [OpenWrt-Devel] [PATCH 2/5] lantiq/xrx200-net: fix PCE_MAPx handling   Martin Schiller
• [OpenWrt-Devel] [PATCH 3/5] lantiq/xrx200-net: fix VID max value   Martin Schiller
• [OpenWrt-Devel] [PATCH 4/5] lantiq/xrx200-net: add FID (filtering identifier) setting   Martin Schiller
• [OpenWrt-Devel] [PATCH 5/5] lantiq/xrx200-net: change VLAN untagged ports and PVID handling   Martin Schiller
• [OpenWrt-Devel] [PATCH 4/5] lantiq/xrx200-net: add FID (filtering identifier) setting   Martin Schiller
• [OpenWrt-Devel] [PATCH 4/5] lantiq/xrx200-net: add FID (filtering identifier) setting   Martin Schiller
• [OpenWrt-Devel] [PATCH 4/5] lantiq/xrx200-net: add FID (filtering identifier) setting   Martin Schiller
• [OpenWrt-Devel] [PATCH 2/5] lantiq/xrx200-net: fix PCE_MAPx handling   Martin Schiller
• [OpenWrt-Devel] [PATCH 1/3] Renamed Gainstrong MiniBox profile to Gainstrong (manufacturer) and updated copyright   Stijn Segers
• [OpenWrt-Devel] [PATCH 2/3] Add OOLITE profile to the Gainstrong manufacturer profile.   Stijn Segers
• [OpenWrt-Devel] [PATCH 3/3] Removed orphan OOLITE profile.   Stijn Segers
• [OpenWrt-Devel] [PATCH 1/3] ar71xx: Renamed Gainstrong MiniBox profile to Gainstrong (manufacturer) and updated copyright   Stijn Segers
• [OpenWrt-Devel] [PATCH 2/3] ar71xx: Add OOLITE profile to the Gainstrong manufacturer profile.   Stijn Segers
• [OpenWrt-Devel] [PATCH 3/3] ar71xx: Removed orphan OOLITE profile.   Stijn Segers
• [OpenWrt-Devel] [PATCH v2] ar71xx: Add OOLITE to the Gainstrong profile, removed standalone profile.   Stijn Segers
• [OpenWrt-Devel] [PATCH] kernel: crypto: add fsl CAAM package   Pushpal Sidhu
• [OpenWrt-Devel] [PATCH v2] kernel: crypto: add fsl CAAM package   Pushpal Sidhu
• [OpenWrt-Devel] [PATCH] kernel: gpio-button-hotplug: update to use threaded irq's   Pushpal Sidhu
• [OpenWrt-Devel] [PATCH v2] kernel: crypto: add fsl CAAM package   Pushpal Sidhu
• [OpenWrt-Devel] [PATCH] Ralink RT288x/RT3xxx: Added support for ZBT-826 / ZBT-1026   Jamie Stuart
• [OpenWrt-Devel] [PATCH] ramips: Added support for ZBT-826 / ZBT-1026   Jamie Stuart
• [OpenWrt-Devel] [PATCH v4 1/2] Add ubnt_hsr platform flag and enable for UniFi Outdoor Plus   Andrew | PolkaSpots Support
• [OpenWrt-Devel] [PATCH] libubus.h: marking unused variables   Emanuel Taube
• [OpenWrt-Devel] [PATCH] libubus.h: marking unused variables   Emanuel Taube
• [OpenWrt-Devel] [PATCH v2] libubus.h: marking unused variables   Emanuel Taube
• [OpenWrt-Devel] [PATCH 1/3] kernel/modules: rename kmod-ipvti to kmod-ip-vti   Stijn Tintel
• [OpenWrt-Devel] [PATCH 2/3] kernel/modules: add kmod-ip6-vti   Stijn Tintel
• [OpenWrt-Devel] [PATCH 3/3] vti: fix kmod dependencies   Stijn Tintel
• [OpenWrt-Devel] svn.openwrt.org down?   Shankar Unni
• [OpenWrt-Devel] svn.openwrt.org down?   Shankar Unni
• [OpenWrt-Devel] openwrt.org down ?   Shankar Unni
• [OpenWrt-Devel] [PATCH 2/2] linux/net: Add dependency for crypto echainiv module on 4.4   Andre Valentin
• [OpenWrt-Devel] [PATCH v2] linux/netsupport: Add support for MPLS protocol   André Valentin
• [OpenWrt-Devel] [PATCH] ramips: fix wan port on Dovado Tiny AC   Andrej Vlašić
• [OpenWrt-Devel] Trac accounts   Weedy
• [OpenWrt-Devel] Trac accounts   Weedy
• [OpenWrt-Devel] svn.openwrt.org down?   Tobias Welz
• [OpenWrt-Devel] procd remote logging on a scheduled basis -capabilities and documentation   Derek Werthmuller
• [OpenWrt-Devel] Native IPv6 Broken in recent trunk   Jo-Philipp Wich
• [OpenWrt-Devel] Plans for CC 15.05.1 or DD 16.xx release?   Jo-Philipp Wich
• [OpenWrt-Devel] [PATCH 3/4] uci: add support for speed_mask to switch LED init scripts   Jo-Philipp Wich
• [OpenWrt-Devel] uci_lookup_ptr() seg fault   Jo-Philipp Wich
• [OpenWrt-Devel] Setting uci defaults in trunk   Jo-Philipp Wich
• [OpenWrt-Devel] [PATCH] ramips: Support LEDs on D-Link DIR-860L B1   Johannes Wienke
• [OpenWrt-Devel] [PATCH] ramips: Support LEDs on D-Link DIR-860L B1   Johannes Wienke
• [OpenWrt-Devel] [PATCH v3] [zynq] Add new target zynq   Jason Wu
• [OpenWrt-Devel] [PATCH v3] Add new target zynq   Jason Wu
• [OpenWrt-Devel] [PATCH v3] Add new target zynq   Jason Wu
• [OpenWrt-Devel] New Ubiquiti AC products locked against 3rd party firmware?   Roman Yeryomin
• [OpenWrt-Devel] [PATCH] [ubus 0/2] cmdline update for ubus   Zhao, Gang
• [OpenWrt-Devel] [PATCH] [ubus 1/2] cli: static keyword tweak   Zhao, Gang
• [OpenWrt-Devel] [PATCH] [ubus 2/2] cli: add timeout support for listen command   Zhao, Gang
• [OpenWrt-Devel] [PATCH] [ubus 1/2] cli: static keyword tweak   Zhao, Gang
• [OpenWrt-Devel] [PATCH] [ubus 2/2] cli: add timeout support for listen command   Zhao, Gang
• [OpenWrt-Devel] [PATCH resend] [ubus 1/2] cli: static keyword tweak   Zhao, Gang
• [OpenWrt-Devel] [PATCH resend] [ubus 2/2] cli: add timeout support for listen command   Zhao, Gang
• [OpenWrt-Devel] [PATCH][libubox] json_script: add "isdir" support   Yousong Zhou
• [OpenWrt-Devel] [PATCH v2] procd: hotplug.json: allow passing hotplug events from all subsystems   Yousong Zhou
• [OpenWrt-Devel] [PATCH][libubox] json_script: add "isdir" support   Yousong Zhou
• [OpenWrt-Devel] [libubox] [PATCH v2 1/2] json_script: add "isdir" support   Yousong Zhou
• [OpenWrt-Devel] [libubox] [PATCH v2 2/2] examples: add shunit2 tests for json_script   Yousong Zhou
• [OpenWrt-Devel] [PATCH v3] procd: hotplug.json: allow passing hotplug events from all subsystems   Yousong Zhou
• [OpenWrt-Devel] [PATCH v3] procd: hotplug.json: allow passing hotplug events from all subsystems   Yousong Zhou
• [OpenWrt-Devel] [libubox] [PATCH v3 1/2] json_script: add "isdir" support   Yousong Zhou
• [OpenWrt-Devel] [libubox] [PATCH v3 2/2] examples: add shunit2 tests for json_script   Yousong Zhou
• [OpenWrt-Devel] [libubox] [PATCH v3 0/2] json_script: add "isdir" expr and tests   Yousong Zhou
• [OpenWrt-Devel] embed TEXINFO in the latest trunk as build tool   Yousong Zhou
• [OpenWrt-Devel] [PATCH 2/3] IP Virtual Server - Load Balancer - ipvsadm tool   Yousong Zhou
• [OpenWrt-Devel] [PATCH 2/3] IP Virtual Server - Load Balancer - ipvsadm tool   Yousong Zhou
• [OpenWrt-Devel] [PATCH] Using external kernel tree should not alter patch behaviour.   Rick van der Zwet
• [OpenWrt-Devel] Openwrt AR9344 Factory reset issue   alzhao
• [OpenWrt-Devel] Where init scripts are linked to rc.d?   alzhao
• [OpenWrt-Devel] [PATCH] lldp: Upgrade to 0.9.0   ben at benjii.net
• [OpenWrt-Devel] uci_lookup_ptr() seg fault   bkil
• [OpenWrt-Devel] [PATCH] brcm63xx: fix CT-536p/CT-5621T support   dani
• [OpenWrt-Devel] [EXPERIMENTAL] [PATCH] base-files busybox: Detect LXC guest and act appropriately   openwrt at daniel.thecshore.com
• [OpenWrt-Devel] [PATCH] [RESEND] network/services/uhttpd: Add Basic Auth config   openwrt at daniel.thecshore.com
• [OpenWrt-Devel] [PATCH 0/2] Using new signing key for SDK built packages   openwrt at daniel.thecshore.com
• [OpenWrt-Devel] [PATCH 1/2] package/signing-key base-files: Move the package list signing key to separate package   openwrt at daniel.thecshore.com
• [OpenWrt-Devel] [PATCH 2/2] package/signing-key target/sdk: Use same signing policy for SDK; new key   openwrt at daniel.thecshore.com
• [OpenWrt-Devel] [PATCH] target/sdk: Allow to configure feeds in SDK   openwrt at daniel.thecshore.com
• [OpenWrt-Devel] [PATCH 1/2] [RESEND] target/sdk: Do not allow SDK to reconfigure already built packages   openwrt at daniel.thecshore.com
• [OpenWrt-Devel] [PATCH 2/2] [RESEND] package/libs/polarssl: Fix package source variable name   openwrt at daniel.thecshore.com
• [OpenWrt-Devel] [PATCH 1/2] [RESEND] base-files image: Require login even on console   openwrt at daniel.thecshore.com
• [OpenWrt-Devel] [PATCH 2/2] [RESEND] base-files: Allow to disable failsafe mode   openwrt at daniel.thecshore.com
• [OpenWrt-Devel] [PATCH 0/8] [RESEND] Allow to build selected set of profile installed of all or one   openwrt at daniel.thecshore.com
• [OpenWrt-Devel] [PATCH 1/8] build metadata: Allow to build a subset of profiles in a single build   openwrt at daniel.thecshore.com
• [OpenWrt-Devel] [PATCH 2/8] ar71xx: Enable mult-profile select   openwrt at daniel.thecshore.com
• [OpenWrt-Devel] [PATCH 3/8] at91: Translate the build all profiles profile to new multi-profile config   openwrt at daniel.thecshore.com
• [OpenWrt-Devel] [PATCH 4/8] ramips: Translate the build all profiles profile to new multi-profile config   openwrt at daniel.thecshore.com
• [OpenWrt-Devel] [PATCH 5/8] mvebu: Translate the build all profiles profile to new multi-profile config   openwrt at daniel.thecshore.com
• [OpenWrt-Devel] [PATCH 6/8] adm5120: Translate the build all profiles profile to new multi-profile config   openwrt at daniel.thecshore.com
• [OpenWrt-Devel] [PATCH 7/8] brcm63xx: Translate the build all profiles profile to new multi-profile config   openwrt at daniel.thecshore.com
• [OpenWrt-Devel] [PATCH 8/8] kirkwood: Translate the build all profiles profile to new multi-profile config   openwrt at daniel.thecshore.com
• [OpenWrt-Devel] [PATCH] [RESEND] target/imagebuilder: Add ability to override image generation options   openwrt at daniel.thecshore.com
• [OpenWrt-Devel] [EXPERIMENTAL] [PATCH] package/network/services/odhcpd: Allow per-interface leasefiles to work with multiple instance dnsmasq   openwrt at daniel.thecshore.com
• [OpenWrt-Devel] [EXPERIMENTAL] [PATCH] package/utils/busybox: Make busybox /bin /sbin so full first in /usr/bin /usr/sbin   openwrt at daniel.thecshore.com
• [OpenWrt-Devel] [PATCH] brcm63xx: Add USB Support for D-Link DSL-2750 B1   justroftest at gmail.com
• [OpenWrt-Devel] openwrt.org down ?   smilebef at gmail.com
• [OpenWrt-Devel] Anyone familiar with RouterBoot? Trying to port board.   valent.turkovic at gmail.com
• [OpenWrt-Devel] New Ubiquiti AC products locked against 3rd party firmware?   valent.turkovic at gmail.com
• [OpenWrt-Devel] [PATCH] [v3] ar71xx: Support for Ubiquiti UniFi AP AC LITE   p.wassi at gmx.at
• [OpenWrt-Devel] [PATCH] [v4] ar71xx: Support for Ubiquiti UniFi AP AC LITE   p.wassi at gmx.at
• [OpenWrt-Devel] [PATCH] [v5] ar71xx: Support for Ubiquiti UniFi AP AC LITE   p.wassi at gmx.at
• [OpenWrt-Devel] write/read from mtd ART partition   John kerry
• [OpenWrt-Devel] write/read from mtd ART partition   John kerry
• [OpenWrt-Devel] write/read from mtd ART partition   John kerry
• [OpenWrt-Devel] Openwrt AR9344 Factory reset issue   John kerry
• [OpenWrt-Devel] Command to Disable Reset Button   John kerry
• [OpenWrt-Devel] downloads.openwrt.org NOT accessible!!!   camden lindsay
• [OpenWrt-Devel] [RFC]ramips: fix embedded switch init   serge
• [OpenWrt-Devel] write/read from mtd ART partition   micke.prag at telldus.se
• [OpenWrt-Devel] Setting uci defaults in trunk   micke.prag at telldus.se
• [OpenWrt-Devel] Setting uci defaults in trunk   micke.prag at telldus.se
• [OpenWrt-Devel] Setting uci defaults in trunk   micke.prag at telldus.se
• [OpenWrt-Devel] [PATCH] base-files: add function ucidef_set_interface_raw   micke.prag at telldus.se
• [OpenWrt-Devel] [PATCH] add reusable function for getting fs type txt   tymon
• [OpenWrt-Devel] [PATCH v2] add reusable function for getting fs type txt   tymon
• [OpenWrt-Devel] openwrt code search with OpenGrok   zyz323
• [OpenWrt-Devel] [PATCH] kernel/build: Fix SetNfsCmdline to work with new .config.set   Petr Štetiar
• [OpenWrt-Devel] [PATCH] kernel/build: Fix SetNfsCmdline to work with new .config.set   Petr Štetiar
• [OpenWrt-Devel] [PATCH] kernel/build: Fix SetNfsCmdline to work with new .config.set   Petr Štetiar
• [OpenWrt-Devel] [PATCH] kernel/build: Fix SetNfsCmdline to work with new .config.set   Petr Štetiar

Last message date: Mon Feb 29 22:07:06 EST 2016
Archived on: Thu Jun 25 05:56:22 EDT 2020

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...