[OpenWrt-Devel] [PATCH] ramips: mt7621: fix WF-2881 for firmware split

[John Crispin]

On 25/02/2016 02:52, YounJae Rho wrote:
> Is there anyone who can accept this patch?
> It's crucial fix for device WF-2881
> Because WF-2881 currently isn't working without it
> 
> Thanks!

you did not even wait 24 hours before complaining, are you joking ?

> 
> -----Original Message-----
> From: openwrt-devel [mailto:openwrt-devel-bounces at lists.openwrt.org] On
> Behalf Of YounJae Rho
> Sent: Tuesday, February 23, 2016 6:29 PM
> To: openwrt-devel at lists.openwrt.org
> Subject: [OpenWrt-Devel] [PATCH] ramips: mt7621: fix WF-2881 for firmware
> split
> 
> This patch fix firmware split for WF-2881 which was previously manually
> partitioned.
> 
> Signed-off-by: YounJae Rho <luxflow at live.com>
> ---
>  target/linux/ramips/dts/WF-2881.dts | 14 ++------------
> target/linux/ramips/image/Makefile  |  5 +++--
>  2 files changed, 5 insertions(+), 14 deletions(-)
> 
> diff --git a/target/linux/ramips/dts/WF-2881.dts
> b/target/linux/ramips/dts/WF-2881.dts
> index aaafe5a..d33436c 100644
> --- a/target/linux/ramips/dts/WF-2881.dts
> +++ b/target/linux/ramips/dts/WF-2881.dts
> @@ -48,19 +48,9 @@
>  			read-only;
>  		};
>  
> -		firmware {
> -			label = "firmware";
> -			reg = <0x140000 0x6EC0000>;
> -		};
> -
>  		partition at 140000 {
> -			label = "kernel";
> -			reg = <0x140000 0x200000>;
> -		};
> -
> -		partition at 340000 {
> -			label = "ubi";
> -			reg = <0x340000 0x6CC0000>;
> +			label = "firmware";
> +			reg = <0x140000 0x7E40000>;
>  		};
>  	};
>  
> diff --git a/target/linux/ramips/image/Makefile
> b/target/linux/ramips/image/Makefile
> index 8bdd76a..99105a6 100644
> --- a/target/linux/ramips/image/Makefile
> +++ b/target/linux/ramips/image/Makefile
> @@ -1070,9 +1070,10 @@ define Device/wf-2881
>    DTS := WF-2881
>    BLOCKSIZE := 128KiB
>    PAGESIZE := 2048
> -  KERNEL_SIZE := 2097152
>    FILESYSTEMS := squashfs
> -  IMAGE/sysupgrade.bin := append-kernel | pad-to $$(KERNEL_SIZE) |
> append-ubi | check-size $$$$(IMAGE_SIZE)
> +  IMAGE_SIZE := 132382720
> +  KERNEL := $(KERNEL_DTB) | pad-offset 131072 64 | uImage lzma  
> + IMAGE/sysupgrade.bin := append-kernel | append-ubi | check-size
> $$$$(IMAGE_SIZE)
>  endef
>  
>  define Device/ubnt-erx
> --
> 2.5.0
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
> 
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel