[OpenWrt-Devel] [PATCH v5 8/8] ar71xx: WNR2000v3: enable control of all LEDs and buttons
Michal
michal.cieslakiewicz at wp.pl
Thu Feb 18 16:51:35 EST 2016
From: Michal Cieslakiewicz <michal.cieslakiewicz at wp.pl>
Subject: [PATCH v5 8/8] ar71xx: WNR2000v3: enable control of all LEDs and buttons
This patch provides full GPIO support for WNR2000v3 (LEDs and buttons).
It exposes all LEDs to operating system, including Ethernet ones.
Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz at wp.pl>
---
Changes:
* no new functionality or fixes - only adjustments since new version of
preceding patch in set ([PATCH v5 7/8] ar71xx: WNR2000v3: fix for
random WLAN MAC) changed mach-wnr2000-v3.c source file
target/linux/ar71xx/base-files/etc/board.d/01_leds | 14 +++
target/linux/ar71xx/base-files/etc/diag.sh | 1 +
.../ar71xx/files/arch/mips/ath79/mach-wnr2000-v3.c | 138 +++++++++++++++++++--
3 files changed, 143 insertions(+), 10 deletions(-)
diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index 151eac2..7374422 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -676,6 +676,20 @@ wlae-ag300n)
ucidef_set_led_netdev "wireless" "WIRELESS" "buffalo:green:wireless" "wlan0"
;;
+wnr2000-v3)
+ ucidef_set_led_netdev "wan-amber" "WAN (amber)" "netgear:amber:wan" "eth0"
+ ucidef_set_led_default "wan-green" "WAN (green)" "netgear:green:wan" "0"
+ ucidef_set_led_netdev "wlan" "WLAN" "netgear:blue:wlan" "wlan0"
+ ucidef_set_led_switch "lan1green" "LAN1 (green)" "netgear:green:lan1" "switch0" "0x02"
+ ucidef_set_led_switch "lan2green" "LAN2 (green)" "netgear:green:lan2" "switch0" "0x04"
+ ucidef_set_led_switch "lan3green" "LAN3 (green)" "netgear:green:lan3" "switch0" "0x08"
+ ucidef_set_led_switch "lan4green" "LAN4 (green)" "netgear:green:lan4" "switch0" "0x10"
+ ucidef_set_led_default "lan1amber" "LAN1 (amber)" "netgear:amber:lan1" "0"
+ ucidef_set_led_default "lan2amber" "LAN2 (amber)" "netgear:amber:lan2" "0"
+ ucidef_set_led_default "lan3amber" "LAN3 (amber)" "netgear:amber:lan3" "0"
+ ucidef_set_led_default "lan4amber" "LAN4 (amber)" "netgear:amber:lan4" "0"
+ ;;
+
wnr2000-v4)
ucidef_set_led_netdev "wan" "WAN" "netgear:green:wan" "eth0"
ucidef_set_led_netdev "wlan" "WLAN" "netgear:blue:wlan" "wlan0"
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index c0e73ad..4ee40f7 100644
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -368,6 +368,7 @@ get_status_led() {
wndr3700v4 | \
wndr4300 | \
wnr2000 | \
+ wnr2000-v3 |\
wnr2200 |\
wnr612-v2 |\
wnr1000-v2 |\
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2000-v3.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2000-v3.c
index 59d10a9..31eb079 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2000-v3.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2000-v3.c
@@ -15,6 +15,7 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/kernel.h> /* for max() macro */
+#include <linux/platform_device.h> /* PLATFORM_DEVID_AUTO is defined here */
#include <asm/mach-ath79/ath79.h>
#include <asm/mach-ath79/ar71xx_regs.h> /* needed to disable switch LEDs */
@@ -27,11 +28,26 @@
#include "dev-m25p80.h"
#include "machtypes.h"
+/* WNR2000v3 - connected through AR7241 */
#define WNR2000V3_GPIO_LED_WAN_GREEN 0
#define WNR2000V3_GPIO_LED_LAN1_AMBER 1
-#define WNR2000V3_GPIO_LED_LAN4_AMBER 12
-#define WNR2000V3_GPIO_LED_PWR_GREEN 14
+#define WNR2000V3_GPIO_LED_LAN2_AMBER 6
+#define WNR2000V3_GPIO_LED_WPS_GREEN 7
+#define WNR2000V3_GPIO_LED_LAN3_AMBER 8
#define WNR2000V3_GPIO_BTN_WPS 11
+#define WNR2000V3_GPIO_LED_LAN4_AMBER 12
+#define WNR2000V3_GPIO_LED_LAN1_GREEN 13
+#define WNR2000V3_GPIO_LED_LAN2_GREEN 14
+#define WNR2000V3_GPIO_LED_LAN3_GREEN 15
+#define WNR2000V3_GPIO_LED_LAN4_GREEN 16
+#define WNR2000V3_GPIO_LED_WAN_AMBER 17
+
+/* WNR2000v3 - connected through AR9287 */
+#define WNR2000V3_GPIO_WMAC_LED_WLAN_BLUE 1
+#define WNR2000V3_GPIO_WMAC_LED_TEST_AMBER 2
+#define WNR2000V3_GPIO_WMAC_LED_POWER_GREEN 3
+#define WNR2000V3_GPIO_WMAC_BTN_RESET 8
+#define WNR2000V3_GPIO_WMAC_BTN_RFKILL 9
#define WNR612V2_GPIO_LED_PWR_GREEN 11
@@ -71,16 +87,67 @@
static struct gpio_led wnr2000v3_leds_gpio[] __initdata = {
{
- .name = "wnr2000v3:green:power",
- .gpio = WNR2000V3_GPIO_LED_PWR_GREEN,
+ .name = "netgear:green:wan",
+ .gpio = WNR2000V3_GPIO_LED_WAN_GREEN,
.active_low = 1,
}, {
- .name = "wnr2000v3:green:wan",
- .gpio = WNR2000V3_GPIO_LED_WAN_GREEN,
+ .name = "netgear:amber:lan1",
+ .gpio = WNR2000V3_GPIO_LED_LAN1_AMBER,
+ .active_low = 1,
+ }, {
+ .name = "netgear:amber:lan2",
+ .gpio = WNR2000V3_GPIO_LED_LAN2_AMBER,
+ .active_low = 1,
+ }, {
+ .name = "netgear:amber:lan3",
+ .gpio = WNR2000V3_GPIO_LED_LAN3_AMBER,
+ .active_low = 1,
+ }, {
+ .name = "netgear:amber:lan4",
+ .gpio = WNR2000V3_GPIO_LED_LAN4_AMBER,
+ .active_low = 1,
+ }, {
+ .name = "netgear:green:wps",
+ .gpio = WNR2000V3_GPIO_LED_WPS_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "netgear:green:lan1",
+ .gpio = WNR2000V3_GPIO_LED_LAN1_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "netgear:green:lan2",
+ .gpio = WNR2000V3_GPIO_LED_LAN2_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "netgear:green:lan3",
+ .gpio = WNR2000V3_GPIO_LED_LAN3_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "netgear:green:lan4",
+ .gpio = WNR2000V3_GPIO_LED_LAN4_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "netgear:amber:wan",
+ .gpio = WNR2000V3_GPIO_LED_WAN_AMBER,
.active_low = 1,
}
};
+static struct gpio_led wnr2000v3_wmac_leds_gpio[] = {
+ {
+ .name = "netgear:green:power",
+ .gpio = WNR2000V3_GPIO_WMAC_LED_POWER_GREEN,
+ .active_low = 1,
+ .default_state = LEDS_GPIO_DEFSTATE_ON,
+ }, {
+ .name = "netgear:amber:test",
+ .gpio = WNR2000V3_GPIO_WMAC_LED_TEST_AMBER,
+ .active_low = 1,
+ }
+};
+
+static const char *wnr2000v3_wmac_led_name = "netgear:blue:wlan";
+
static struct gpio_led wnr612v2_leds_gpio[] __initdata = {
{
.name = "netgear:green:power",
@@ -173,13 +240,32 @@ static struct gpio_led wpn824n_wmac_leds_gpio[] = {
}
};
-static struct gpio_keys_button wnr2000v3_gpio_keys[] __initdata = {
+static struct gpio_keys_button wnr2000v3_keys_gpio[] __initdata = {
{
.desc = "wps",
.type = EV_KEY,
.code = KEY_WPS_BUTTON,
.debounce_interval = WNR2000V3_KEYS_DEBOUNCE_INTERVAL,
.gpio = WNR2000V3_GPIO_BTN_WPS,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button wnr2000v3_wmac_keys_gpio[] = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = WNR2000V3_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WNR2000V3_GPIO_WMAC_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "rfkill",
+ .type = EV_KEY,
+ .code = KEY_RFKILL,
+ .debounce_interval = WNR2000V3_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WNR2000V3_GPIO_WMAC_BTN_RFKILL,
+ .active_low = 1,
}
};
@@ -237,6 +323,26 @@ static void __init wnr2000v3_setup(void)
{
u8 wlan_mac_addr[6];
+ /*
+ * Disable JTAG to use all AR724X GPIO LEDs.
+ * Also disable CLKs and bit 20 as u-boot does.
+ * Finally, allow OS to control all link LEDs.
+ */
+ ath79_gpio_function_setup(AR724X_GPIO_FUNC_JTAG_DISABLE |
+ AR724X_GPIO_FUNC_UART_EN,
+ AR724X_GPIO_FUNC_CLK_OBS1_EN |
+ AR724X_GPIO_FUNC_CLK_OBS2_EN |
+ AR724X_GPIO_FUNC_CLK_OBS3_EN |
+ AR724X_GPIO_FUNC_CLK_OBS4_EN |
+ AR724X_GPIO_FUNC_CLK_OBS5_EN |
+ AR724X_GPIO_FUNC_GE0_MII_CLK_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN |
+ BIT(20));
+
wnr_get_wmac(wlan_mac_addr, WNR2000V3_MAC0_OFFSET,
WNR2000V3_MAC1_OFFSET, WNR2000V3_WMAC_OFFSET);
@@ -245,9 +351,21 @@ static void __init wnr2000v3_setup(void)
ath79_register_leds_gpio(-1, ARRAY_SIZE(wnr2000v3_leds_gpio),
wnr2000v3_leds_gpio);
- ath79_register_gpio_keys_polled(-1, WNR2000V3_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(wnr2000v3_gpio_keys),
- wnr2000v3_gpio_keys);
+ /* Do not use id=-1, we can have more GPIO key-polled devices */
+ ath79_register_gpio_keys_polled(PLATFORM_DEVID_AUTO,
+ WNR2000V3_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(wnr2000v3_keys_gpio),
+ wnr2000v3_keys_gpio);
+
+ ap9x_pci_setup_wmac_led_pin(0, WNR2000V3_GPIO_WMAC_LED_WLAN_BLUE);
+ ap9x_pci_setup_wmac_led_name(0, wnr2000v3_wmac_led_name);
+
+ ap9x_pci_setup_wmac_leds(0, wnr2000v3_wmac_leds_gpio,
+ ARRAY_SIZE(wnr2000v3_wmac_leds_gpio));
+
+ ap9x_pci_setup_wmac_btns(0, wnr2000v3_wmac_keys_gpio,
+ ARRAY_SIZE(wnr2000v3_wmac_keys_gpio),
+ WNR2000V3_KEYS_POLL_INTERVAL);
}
MIPS_MACHINE(ATH79_MACH_WNR2000_V3, "WNR2000V3", "NETGEAR WNR2000 V3", wnr2000v3_setup);
--
2.6.4
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list