[OpenWrt-Devel] Native IPv6 Broken in recent trunk

Adam Kuklycz adamk at mcservices.com.au
Tue Feb 9 16:54:09 EST 2016


Wow, you really can't get away with much these days....:(

BTW I didn't just change the subject I blanked out the entire message as 
well :P

I'll start a fresh thread once I've compiled and tested the earlier 
trunk commit, which I am about to begin now.



On 10/02/16 00:55, John Crispin wrote:
> Hi Adam,
>
> please do not hijack threads. if you want to send us a mail then dont
> click Reply on an un-related thread and then change the subject. this
> will mess up patchwork, which did notice what you did ;)
>
> --> https://patchwork.ozlabs.org/patch/580275/
>
> 	John
>
> On 09/02/2016 05:42, Adam Kuklycz wrote:
>> All,
>>
>> I've compiled OpenWRT trunk version r48667 successfully and have noticed
>> that when using PPPoE with native IPv6 that while IPv6 addresses are
>> correctly assigned and also allocated out to client devices on the LAN,
>> there is no default route for WAN6, and thus nothing can connect to the
>> Internet via IPv6, including the router itself.
>>
>> This means that even when doing a ping6 or traceroute6 from the router,
>> all external addresses show up as no route.
>>
>> Have attached the config used which I hope is nothing out of the
>> ordinary...
>>
>> The last firmware I compiled and have work fine with IPv6 was r47245.
>>
>> I have reported this issue once before but that was quite some time
>> ago...so I am surprised if this is a regression.
>>
>> Relevant parts of /etc/config/network (which work fine using r47245):
>>
>> config interface 'lan'
>>          option force_link '1'
>>          option type 'bridge'
>>          option proto 'static'
>>          option netmask '255.255.255.0'
>>          option ip6assign '64'
>>          option dns 'xxxxxxxxxxxxx'
>>          option ipaddr '172.18.18.1'
>>          option _orig_ifname 'eth0.1 wlan0 wlan0-1 wlan1'
>>          option _orig_bridge 'true'
>>          option ifname 'eth0.1'
>>
>> config interface 'wan'
>>          option _orig_ifname 'eth0.2'
>>          option _orig_bridge 'false'
>>          option proto 'pppoe'
>>          option username 'xxxxxxxxxxxxxxxxxxxxxxx'
>>          option password 'xxxxxxxxxxxxxx'
>>          option peerdns '0'
>>          option dns 'xxxxxxxxxxxx'
>>          option ifname 'eth0.2'
>>          option ipv6 'auto'
>>
>> config interface 'wan6'
>>          option proto 'dhcpv6'
>>          option dns 'xxxxxxxxxxxx'
>>          option peerdns '0'
>>          option reqaddress 'try'
>>          option reqprefix '64'
>>          option _orig_ifname '@wan'
>>          option _orig_bridge 'false'
>>          option ifname 'eth0.2'
>>
>>
>> _______________________________________________
>> openwrt-devel mailing list
>> openwrt-devel at lists.openwrt.org
>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>>
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel



More information about the openwrt-devel mailing list