[OpenWrt-Devel] [PATCH] [v5] ar71xx: Support for Ubiquiti UniFi AP AC LITE
p.wassi at gmx.at
p.wassi at gmx.at
Fri Feb 12 06:25:09 EST 2016
From: Paul Wassi <p.wassi at gmx.at>
Add support for the Ubiquiti UniFi AP AC LITE
Signed-off-by: Paul Wassi <p.wassi at gmx.at>
---
This patch adds:
* New machine type
* Code for device setup
* Proper image configuration
* New target for the build system
* Network setup as LAN-only
* Diagnostic LED
* Sysupgrade Support
* ath10k firmware extraction
* Board detection
base-files/etc/board.d/02_network | 1
base-files/etc/diag.sh | 3
base-files/etc/hotplug.d/firmware/11-ath10k-caldata | 3
base-files/lib/ar71xx.sh | 3
base-files/lib/upgrade/platform.sh | 1
config-4.1 | 1
files/arch/mips/ath79/Kconfig.openwrt | 10 +
files/arch/mips/ath79/Makefile | 1
files/arch/mips/ath79/mach-ubnt-unifiac.c | 109 ++++++++++++++++++++
files/arch/mips/ath79/machtypes.h | 1
generic/profiles/ubnt.mk | 11 ++
image/Makefile | 11 +-
mikrotik/config-default | 1
nand/config-default | 1
14 files changed, 155 insertions(+), 2 deletions(-)
diff -rupN a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@@ -359,6 +359,7 @@ tl-wa901nd-v2 |\
tl-wa901nd-v3 |\
tl-wr703n |\
tube2h |\
+unifiac |\
wndap360 |\
mynet-rext |\
wp543)
diff -rupN a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -339,7 +339,8 @@ get_status_led() {
unifi)
status_led="ubnt:green:dome"
;;
- uap-pro)
+ uap-pro | \
+ unifiac)
status_led="ubnt:white:dome"
;;
unifi-outdoor-plus)
diff -rupN a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
--- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -75,6 +75,9 @@ case "$FIRMWARE" in
ath10kcal_extract "ART" 20480 2116
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16)
;;
+ unifiac)
+ ath10kcal_extract "EEPROM" 20480 2116
+ ;;
esac
;;
"ath10k/cal-pci-0000:01:00.0.bin")
diff -rupN a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -905,6 +905,9 @@ ar71xx_board_detect() {
*UniFi)
name="unifi"
;;
+ *"UniFi-AC")
+ name="unifiac"
+ ;;
*"UniFi AP Pro")
name="uap-pro"
;;
diff -rupN a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -262,6 +262,7 @@ platform_check_image() {
wlae-ag300n | \
nbg460n_550n_550nh | \
unifi | \
+ unifiac | \
unifi-outdoor | \
carambola2 | \
weio )
diff -rupN a/target/linux/ar71xx/config-4.1 b/target/linux/ar71xx/config-4.1
--- a/target/linux/ar71xx/config-4.1
+++ b/target/linux/ar71xx/config-4.1
CONFIG_ATH79_MACH_TUBE2H=y
CONFIG_ATH79_MACH_UBNT=y
CONFIG_ATH79_MACH_UBNT_XM=y
+CONFIG_ATH79_MACH_UBNT_UNIFIAC=y
CONFIG_ATH79_MACH_WEIO=y
CONFIG_ATH79_MACH_WHR_HP_G300N=y
CONFIG_ATH79_MACH_WLAE_AG300N=y
diff -rupN a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
@@ -1349,6 +1349,16 @@ config ATH79_MACH_UBNT
select ATH79_DEV_M25P80
select ATH79_DEV_USB
+config ATH79_MACH_UBNT_UNIFIAC
+ bool "Ubiquiti UniFi AC (LITE) support"
+ select SOC_QCA956X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
config ATH79_MACH_WEIO
bool "WeIO board"
select SOC_AR933X
diff -rupN a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
@@ -209,6 +209,7 @@ enum ath79_mach_type {
ATH79_MACH_UBNT_RS, /* Ubiquiti RouterStation */
ATH79_MACH_UBNT_UAP_PRO, /* Ubiquiti UniFi AP Pro */
ATH79_MACH_UBNT_UNIFI, /* Ubiquiti Unifi */
+ ATH79_MACH_UBNT_UNIFIAC, /* Ubiquiti Unifi AC */
ATH79_MACH_UBNT_UNIFI_OUTDOOR, /* Ubiquiti UnifiAP Outdoor */
ATH79_MACH_UBNT_UNIFI_OUTDOOR_PLUS, /* Ubiquiti UnifiAP Outdoor+ */
ATH79_MACH_UBNT_XM, /* Ubiquiti Networks XM board rev 1.0 */
diff -rupN a/target/linux/ar71xx/files/arch/mips/ath79/mach-ubnt-unifiac.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-ubnt-unifiac.c
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-ubnt-unifiac.c
@@ -0,0 +1,109 @@
+/*
+ * Ubiquiti UniFi AC (LITE) board support
+ *
+ * Copyright (C) 2015-2016 P. Wassi <p.wassi at gmx.at>
+ *
+ * Derived from: mach-ubnt-xm.c
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+#include <linux/etherdevice.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/irq.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include <linux/platform_data/phy-at803x.h>
+
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+
+#define UNIFIAC_KEYS_POLL_INTERVAL 20
+#define UNIFIAC_KEYS_DEBOUNCE_INTERVAL (3 * UNIFIAC_KEYS_POLL_INTERVAL)
+
+#define UNIFIAC_GPIO_LED_WHITE 7
+#define UNIFIAC_GPIO_LED_BLUE 8
+
+#define UNIFIAC_GPIO_BTN_RESET 2
+
+#define UNIFIAC_MAC0_OFFSET 0x0000
+#define UNIFIAC_WMAC_CALDATA_OFFSET 0x1000
+#define UNIFIAC_PCI_CALDATA_OFFSET 0x5000
+
+
+static struct flash_platform_data ubnt_unifiac_flash_data = {
+ /* mx25l12805d and mx25l12835f have the same JEDEC ID */
+ .type = "mx25l12805d",
+};
+
+static struct gpio_led ubnt_unifiac_leds_gpio[] __initdata = {
+ {
+ .name = "ubnt:white:dome",
+ .gpio = UNIFIAC_GPIO_LED_WHITE,
+ .active_low = 0,
+ }, {
+ .name = "ubnt:blue:dome",
+ .gpio = UNIFIAC_GPIO_LED_BLUE,
+ .active_low = 0,
+ }
+};
+
+static struct gpio_keys_button ubnt_unifiac_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = UNIFIAC_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = UNIFIAC_GPIO_BTN_RESET,
+ .active_low = 1,
+ }
+};
+
+static void __init ubnt_unifiac_setup(void)
+{
+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000);
+
+ ath79_register_m25p80(&ubnt_unifiac_flash_data);
+
+
+ ath79_init_mac(ath79_eth0_data.mac_addr,
+ eeprom + UNIFIAC_MAC0_OFFSET, 0);
+
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
+ ath79_eth0_data.phy_mask = BIT(4);
+ ath79_eth0_pll_data.pll_10 = 0x00001313;
+
+ ath79_register_mdio(0, ~BIT(4));
+ ath79_register_eth(0);
+
+
+ ath79_register_wmac(eeprom + UNIFIAC_WMAC_CALDATA_OFFSET, NULL);
+
+
+ ap91_pci_init(eeprom + UNIFIAC_PCI_CALDATA_OFFSET, NULL);
+
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifiac_leds_gpio),
+ ubnt_unifiac_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, UNIFIAC_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(ubnt_unifiac_gpio_keys),
+ ubnt_unifiac_gpio_keys);
+}
+
+MIPS_MACHINE(ATH79_MACH_UBNT_UNIFIAC, "UBNT-UF-AC", "Ubiquiti UniFi-AC",
+ ubnt_unifiac_setup);
diff -rupN a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
--- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
@@ -165,6 +165,7 @@ obj-$(CONFIG_ATH79_MACH_TL_WR720N_V3) +=
obj-$(CONFIG_ATH79_MACH_TUBE2H) += mach-tube2h.o
obj-$(CONFIG_ATH79_MACH_UBNT) += mach-ubnt.o
obj-$(CONFIG_ATH79_MACH_UBNT_XM) += mach-ubnt-xm.o
+obj-$(CONFIG_ATH79_MACH_UBNT_UNIFIAC) += mach-ubnt-unifiac.o
obj-$(CONFIG_ATH79_MACH_WEIO) += mach-weio.o
obj-$(CONFIG_ATH79_MACH_WHR_HP_G300N) += mach-whr-hp-g300n.o
obj-$(CONFIG_ATH79_MACH_WLAE_AG300N) += mach-wlae-ag300n.o
diff -rupN a/target/linux/ar71xx/generic/profiles/ubnt.mk b/target/linux/ar71xx/generic/profiles/ubnt.mk
--- a/target/linux/ar71xx/generic/profiles/ubnt.mk
+++ b/target/linux/ar71xx/generic/profiles/ubnt.mk
@@ -38,6 +38,17 @@ endef
$(eval $(call Profile,UBNTUNIFI))
+define Profile/UBNTUNIFIAC
+ NAME:=Ubiquiti UniFi AP AC
+ PACKAGES:=kmod-ath10k ath10k-firmware-qca988x
+endef
+
+define Profile/UBNTUNIFIAC/Description
+ Package set optimized for the Ubiquiti UniFi AP AC.
+endef
+
+$(eval $(call Profile,UBNTUNIFIAC))
+
define Profile/UBNTUNIFIOUTDOOR
NAME:=Ubiquiti UniFiAP Outdoor
PACKAGES:=
diff -rupN a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile
--- a/target/linux/ar71xx/image/Makefile
+++ b/target/linux/ar71xx/image/Makefile
@@ -1132,12 +1132,21 @@ define Device/ubnt-unifi
DEVICE_PROFILE := UBNT UBNTUNIFI
endef
+define Device/ubnt-unifiac
+ DEVICE_PROFILE := UBNT UBNTUNIFIAC
+ IMAGE_SIZE := 7744k
+ MTDPARTS = spi0.0:384k(u-boot)ro,64k(u-boot-env)ro,7744k(firmware),7744k(ubnt-airos)ro,128k(bs)ro,256k(cfg)ro,64k(EEPROM)ro
+ IMAGES := sysupgrade.bin
+ IMAGE/sysupgrade.bin = append-kernel $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
+ BOARDNAME := UBNT-UF-AC
+endef
+
define Device/ubnt-unifi-outdoor
$(Device/ubnt-bz)
BOARDNAME := UBNT-U20
DEVICE_PROFILE := UBNT UBNTUNIFIOUTDOOR
endef
-TARGET_DEVICES += ubnt-unifi ubnt-unifi-outdoor
+TARGET_DEVICES += ubnt-unifi ubnt-unifiac ubnt-unifi-outdoor
define Device/ubnt-nano-m-xw
$(Device/ubnt-xw)
diff -rupN a/target/linux/ar71xx/mikrotik/config-default b/target/linux/ar71xx/mikrotik/config-default
--- a/target/linux/ar71xx/mikrotik/config-default
+++ b/target/linux/ar71xx/mikrotik/config-default
@@ -104,6 +104,7 @@ CONFIG_ATH79_MACH_RBSXTLITE=y
# CONFIG_ATH79_MACH_TUBE2H is not set
# CONFIG_ATH79_MACH_UBNT is not set
# CONFIG_ATH79_MACH_UBNT_XM is not set
+# CONFIG_ATH79_MACH_UBNT_UNIFIAC is not set
# CONFIG_ATH79_MACH_WHR_HP_G300N is not set
# CONFIG_ATH79_MACH_WLAE_AG300N is not set
# CONFIG_ATH79_MACH_WLR8100 is not set
diff -rupN a/target/linux/ar71xx/nand/config-default b/target/linux/ar71xx/nand/config-default
--- a/target/linux/ar71xx/nand/config-default
+++ b/target/linux/ar71xx/nand/config-default
@@ -63,6 +63,7 @@
# CONFIG_ATH79_MACH_TL_WR941ND is not set
# CONFIG_ATH79_MACH_UBNT is not set
# CONFIG_ATH79_MACH_UBNT_XM is not set
+# CONFIG_ATH79_MACH_UBNT_UNIFIAC is not set
# CONFIG_ATH79_MACH_WHR_HP_G300N is not set
# CONFIG_ATH79_MACH_WLAE_AG300N is not set
# CONFIG_ATH79_MACH_WNDAP360 is not set
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list