[OpenWrt-Devel] [PATCH v4 1/2] Add ubnt_hsr platform flag and enable for UniFi Outdoor Plus

Andrew | PolkaSpots Support andrew at polkaspots.com
Fri Feb 19 05:21:57 EST 2016


The ubnt pro and outdoor+ have a different factory TFTP firmware.
Let me know if you need that, however you should be able to recover
with the openwrt one.
Still digging through the commit loggs for trunk, can't see the patch.
Am I missing something?

Cheers,
A
On Mon, 2015-12-14 at 12:54 +0100, Stefan Rompf wrote:
> Hi Tim,
> 
> > The auto-built image of 9 December 2015 for this device results in
> > a
> > bricked state. TFTP recovery with a stock recovery firmware from
> > Ubiquity does not allow the device to boot either.
> 
> try flashing the chaos calmer factory image with TFTP
> (openwrt-15.05-ar71xx-generic-ubnt-unifi-outdoor-plus-squashfs
> -factory.bin)
> 
> This has allowed me to recover a bricked Outdoor Plus. Flashing the
> Ubiquiti 
> firmware via TFTP didn't work for me either.
> 
> > but if anyone wants this device as a donation to get it
> > supported by OpenWRT, please let me know.
> 
> Well on one hand I'd be interested because the access point I had is
> mounted 
> onsite now and therefore not available for hacking anymore.
> 
> On the other hand, I got the impression that mine and Kyrills patches
> were not 
> too welcome, so I'm a bit hesitant to invest more time.
> 
> So good luck with unbricking, may be the device gets usable for your
> again!
> 
> Stefan
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel



More information about the openwrt-devel mailing list