[OpenWrt-Devel] [PATCH 3/5] ltq-vdsl-app: sync annex option between from ADSL package

[Hauke Mehrtens]

The detailed annex option were only available in the danube DSL app
including the activation of G.992.2 Annex A (ADSL Lite). This is now
also added to the vdsl app for the vrx200.

Signed-off-by: Hauke Mehrtens <hauke at hauke-m.de>
---
 .../network/config/ltq-vdsl-app/files/dsl_control  | 44 ++++++++++++++++++++--
 1 file changed, 41 insertions(+), 3 deletions(-)

diff --git a/package/network/config/ltq-vdsl-app/files/dsl_control b/package/network/config/ltq-vdsl-app/files/dsl_control
index 2241422..ba77a6f 100644
--- a/package/network/config/ltq-vdsl-app/files/dsl_control
+++ b/package/network/config/ltq-vdsl-app/files/dsl_control
@@ -16,11 +16,12 @@ EXTRA_HELP="	status  Get DSL status information
 # ITU-T G.997.1 Amendment 2 (04/2013) - Section 2.1 - (Vectoring mode enable (VECTORMODE_ENABLE))
 #
 # G.992.1 Annex A
+# G.992.2 Annex A
 # G.992.3 Annex A / L-US1 / L_US-2 / M
 # G.992.5 Annex A / M
 # G.993.2 Annex A/B/C
 # G.993.5 Annex A/B/C
-xtse_xdsl_a="05_00_04_00_4C_01_04_0F"
+xtse_xdsl_a="05_01_04_00_4C_01_04_0F"
 
 # G.992.1 Annex B
 # G.992.3 Annex B
@@ -38,6 +39,43 @@ xtse_xdsl_b="10_00_10_00_00_04_00_0F"
 # G.993.5 Annex A/B/C
 xtse_xdsl_j="10_00_10_40_00_04_01_0F"
 
+# G.992.1 Annex B
+xtse_xdsl_bdmt="10_00_00_00_00_00_00_00"
+
+# G.992.3 Annex B
+xtse_xdsl_b2="00_00_10_00_00_00_00_00"
+
+# G.992.5 Annex B
+xtse_xdsl_b2p="00_00_00_00_00_04_00_00"
+
+# ANSI T1.413
+xtse_xdsl_at1="01_00_00_00_00_00_00_00"
+
+# G.992.2 Annex A
+xtse_xdsl_alite="00_01_00_00_00_00_00_00"
+
+# G.992.1 Annex A
+xtse_xdsl_admt="04_00_00_00_00_00_00_00"
+
+# G.992.3 Annex A
+xtse_xdsl_a2="00_00_04_00_00_00_00_00"
+
+# G.992.5 Annex A
+xtse_xdsl_a2p="00_00_00_00_00_01_00_00"
+
+# G.992.3 Annex L
+xtse_xdsl_l="00_00_00_00_0C_00_00_00"
+
+# G.992.3 Annex M
+# G.992.5 Annex M
+xtse_xdsl_m="00_00_00_00_40_00_04_00"
+
+# G.992.3 Annex M
+xtse_xdsl_m2="00_00_00_00_40_00_00_00"
+
+# G.992.5 Annex M
+xtse_xdsl_m2p="00_00_00_00_00_00_04_00"
+
 #
 # ITU-T G.994.1 (06/2012) - Table 2 (Mandatory carrier sets)
 #
@@ -156,7 +194,7 @@ start_service() {
 	if [ -z "${firmware}" ]; then
 		if grep -qE "system type.*: (VR9|xRX200)" /proc/cpuinfo; then
 			case "${annex}" in
-			a|l|m)
+			a*|l*|m*)
 				if [ -f "/lib/firmware/lantiq-vrx200-a.bin" ]; then
 					firmware="/lib/firmware/lantiq-vrx200-a.bin"
 				elif [ -f "/tmp/lantiq-vrx200-a.bin" ]; then
@@ -171,7 +209,7 @@ start_service() {
 					return -1
 				fi
 				;;
-			b|j)
+			b*|j*)
 				if [ -f "/lib/firmware/lantiq-vrx200-b.bin" ]; then
 					firmware="/lib/firmware/lantiq-vrx200-b.bin"
 				elif [ -f "/tmp/lantiq-vrx200-b.bin" ]; then
-- 
2.7.0
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel