August 2016 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Mon Aug 1 02:04:56 PDT 2016
Ending: Wed Aug 31 01:24:15 PDT 2016
Messages: 156

• [PATCHv2 0/2] ath10k: Allow setting coverage class   Benjamin Berg
• [PATCHv2 1/2] ath10k: Rename hw_rx_desc_ops to hw_ops to use it for other purposes   Benjamin Berg
• [PATCHv2 2/2] ath10k: Allow setting coverage class   Benjamin Berg
• [PATCHv3 0/2] ath10k: Allow setting coverage class   Benjamin Berg
• [PATCHv3 1/2] ath10k: Rename hw_rx_desc_ops to hw_ops to use it for other purposes   Benjamin Berg
• [PATCHv3 2/2] ath10k: Allow setting coverage class   Benjamin Berg
• [PATCHv3 2/2] ath10k: Allow setting coverage class   Benjamin Berg
• [PATCHv3 0/5] ath10k: Allow setting coverage class and rx cleanups   Benjamin Berg
• [PATCHv3 1/5] ath10k: Move ath10k_hw_params definition to hw.h   Benjamin Berg
• [PATCHv3 2/5] ath10k: Add provision for Rx descriptor abstraction   Benjamin Berg
• [PATCHv3 3/5] ath10k: Properly remove padding from the start of rx payload   Benjamin Berg
• [PATCHv3 4/5] ath10k: Remove 4-addr padding related hw_param configuration   Benjamin Berg
• [PATCHv3 5/5] ath10k: Allow setting coverage class   Benjamin Berg
• [PATCH 1/2] cfg80211: Add support to set tx power for a station associated   Johannes Berg
• [PATCH v3] ath10k: implement NAPI support   Johannes Berg
• [PATCH] ath10k: fix spelling mistake "montior" -> "monitor"   Julian Calaby
• DFS radar pattern detection in different regions   Adrian Chadd
• Issue with ATH10K driver while bringing up mesh interface   Yeoh Chun-Yeow
• [RFC] ath10k: silence firmware file probing warnings   Felix Fietkau
• [PATCHv2 2/2] ath10k: Allow setting coverage class   Sebastian Gottschall
• [PATCHv2 2/2] ath10k: Allow setting coverage class   Sebastian Gottschall
• [PATCHv3 2/2] ath10k: Allow setting coverage class   Sebastian Gottschall
• [PATCH 1/2] cfg80211: Add support to set tx power for a station associated   Ben Greear
• ath10k: Are there any PCI based WLAN cards to be plugged into desktop PC?   Ben Greear
• master-pending: ODEBUG: free active (active state 0) object type: timer_list hint: ath10k_htt_rx_ring_refill_retry+0x0/0x10 [ath10k_core]   Ben Greear
• [PATCH 2/3] ath10k: Grab rcu_read_lock before the txqs spinlock.   Ben Greear
• [PATCH 1/3] ath10k: Ensure there are no stale ar->txqs entries.   Ben Greear
• [PATCH 4/6] ath10k: QCA9984 hw1.0: add firmware and board files   Ben Greear
• [PATCH 4/4] ath10k: fix spurious tx/rx during boot   Ben Greear
• [PATCHv3 2/2] ath10k: Allow setting coverage class   Ben Greear
• [PATCH 4/4] ath10k: fix spurious tx/rx during boot   Ben Greear
• Free Software replacement for ath10k chipsets' firmware   Ben Greear
• Issue with ATH10K driver while bringing up mesh interface   Alexis Green
• ath10k fail to load firmware   Stanislaw Gruszka
• ath10k fail to load firmware   Stanislaw Gruszka
• ath10k fail to load firmware   Stanislaw Gruszka
• Issue with ATH10K driver while bringing up mesh interface   Horse
• Issue with ATH10K driver while bringing up mesh interface   Horse
• MTU size of Ath10k   Horse
• Issue with ATH10K driver while bringing up mesh interface   Raj Joshi
• DFS radar pattern detection in different regions   Raj Joshi
• DFS radar pattern detection in different regions   Raj Joshi
• DFS radar pattern detection in different regions   Raj Joshi
• Free Software replacement for ath10k chipsets' firmware   Raj Joshi
• ath10k fail to load firmware   Michal Kazior
• [PATCH] ath10k: Allow setting coverage class   Michal Kazior
• [PATCHv2 2/2] ath10k: Allow setting coverage class   Michal Kazior
• [PATCHv2 2/2] ath10k: Allow setting coverage class   Michal Kazior
• [PATCH 1/3] ath10k: Ensure there are no stale ar->txqs entries.   Michal Kazior
• ath10k: qca6174 firmware: difference between hw2.1/firmware-5 and hw3.0/firmware-4   Michal Kazior
• [PATCH 4/4] ath10k: fix spurious tx/rx during boot   Michal Kazior
• Questions for ath10k rate control, bandwidth, and channel sensing   Michal Kazior
• ath10k: is there hw3.0 firmware for qca6164 (one spatial stream)   Michal Kazior
• [PATCH] ath10k: fix memory leak on caldata on error exit path   Colin King
• [PATCH] ath10k: fix spelling mistake "montior" -> "monitor"   Colin King
• Issue with ATH10K driver while bringing up mesh interface   Sridhar Konabathini
• Issue with ATH10K driver while bringing up mesh interface   Sridhar Konabathini
• Issue with ATH10K driver while bringing up mesh interface   Sridhar Kondabathini
• [PATCH] ath10k: fix group privacy action frame decryption for qca4019   Rajkumar Manoharan
• [PATCH v2] ath10k: fix group privacy action frame decryption for qca4019   Rajkumar Manoharan
• [PATCH] ath10k: improve wake_tx_queue ops performance   Rajkumar Manoharan
• [PATCH 2/3] ath10k: Grab rcu_read_lock before the txqs spinlock.   Manoharan, Rajkumar
• master-pending: ODEBUG: free active (active state 0) object type: timer_list hint: ath10k_htt_rx_ring_refill_retry+0x0/0x10 [ath10k_core]   Manoharan, Rajkumar
• master-pending: ODEBUG: free active (active state 0) object type: timer_list hint: ath10k_htt_rx_ring_refill_retry+0x0/0x10 [ath10k_core]   Manoharan, Rajkumar
• [PATCH v3] ath10k: implement NAPI support   Rajkumar Manoharan
• [PATCH v3] ath10k: implement NAPI support   Rajkumar Manoharan
• [PATCH] ath10k: fix throughput regression in multi client mode   Rajkumar Manoharan
• [PATCH 0/2] platform regulatory support   Bartosz Markowski
• [PATCH 1/2] ath: export alpha2 helper   Bartosz Markowski
• [PATCH 2/2] ath10k: add platform regulatory domain support   Bartosz Markowski
• [PATCH 4/6] ath10k: QCA9984 hw1.0: add firmware and board files   Kyle McMartin
• [PATCH v2 0/6] linux-firmware: ath10k: update and add various firmware files   Kyle McMartin
• [PATCH] ath10k: fix sending frame in management path in push txq logic   Ashok Raj Nagarajan
• [PATCH 0763/1285] Replace numeric parameter like 0444 with macro   Baole Ni
• [PATCH 0764/1285] Replace numeric parameter like 0444 with macro   Baole Ni
• Issue with ATH10K driver while bringing up mesh interface   Peter Oh
• DFS radar pattern detection in different regions   Peter Oh
• Issue with ATH10K driver while bringing up mesh interface   Peter Oh
• Unable to deliver your item, #0000626742   FedEx Standard Overnight
• Issue with ATH10K driver while bringing up mesh interface   Pedersen, Thomas
• [PATCH] ath10k: hide kernel addresses from logs using %pK format specifier   Joe Perches
• [PATCH] ath10k: Spelling and miscellaneous neatening   Joe Perches
• Free Software replacement for ath10k chipsets' firmware   David Rabel
• [RFC] ath10k: silence firmware file probing warnings   Luis R. Rodriguez
• [RFC] ath10k: silence firmware file probing warnings   Luis R. Rodriguez
• [RFC] ath10k: silence firmware file probing warnings   Luis R. Rodriguez
• [PATCH 0/2] wireless: Use complete() instead complete_all()   Luis R. Rodriguez
• [PATCH] ath10k: suppress warnings when getting wmi WDS peer event id   Mohammed Shafi Shajakhan
• [PATCH 3/3] ath10k: Improve logging message.   Mohammed Shafi Shajakhan
• [PATCH v5] ath10k: Fix broken NULL func data frame status for 10.4   Mohammed Shafi Shajakhan
• [RFC] ath10k: silence firmware file probing warnings   Arend van Spriel
• [RFC] ath10k: silence firmware file probing warnings   Arend van Spriel
• QCA988X firmware 10.2 and Broadcom stations   Andy Strohman
• QCA988X firmware 10.1 and Broadcom stations   Andy Strohman
• [PATCH] ath10k: disable wake_tx_queue for older devices   Dave Taht
• [PATCH] ath10k: disable wake_tx_queue for older devices   Dave Taht
• [PATCH v3] ath10k: implement NAPI support   Dave Taht
• [PATCH v3] ath10k: implement NAPI support   Dave Taht
• [PATCH 4/4] ath10k: Enable support for QCA9984   Thiagarajan, Vasanthakumar
• [RFC] ath10k: silence firmware file probing warnings   Valo, Kalle
• [RFC] ath10k: silence firmware file probing warnings   Valo, Kalle
• ath10k fail to load firmware   Valo, Kalle
• ath10k fail to load firmware   Valo, Kalle
• report channel state information (CSI) at ath10k   Valo, Kalle
• [RFC] ath10k: silence firmware file probing warnings   Valo, Kalle
• QCA9377   Valo, Kalle
• master-pending: ODEBUG: free active (active state 0) object type: timer_list hint: ath10k_htt_rx_ring_refill_retry+0x0/0x10 [ath10k_core]   Valo, Kalle
• master-pending: ODEBUG: free active (active state 0) object type: timer_list hint: ath10k_htt_rx_ring_refill_retry+0x0/0x10 [ath10k_core]   Valo, Kalle
• master-pending: ODEBUG: free active (active state 0) object type: timer_list hint: ath10k_htt_rx_ring_refill_retry+0x0/0x10 [ath10k_core]   Valo, Kalle
• ath10k fail to load firmware   Valo, Kalle
• ath10k fail to load firmware   Valo, Kalle
• master-pending: ODEBUG: free active (active state 0) object type: timer_list hint: ath10k_htt_rx_ring_refill_retry+0x0/0x10 [ath10k_core]   Valo, Kalle
• master-pending: ODEBUG: free active (active state 0) object type: timer_list hint: ath10k_htt_rx_ring_refill_retry+0x0/0x10 [ath10k_core]   Valo, Kalle
• [PATCH 0/6] linux-firmware: ath10k: update and add various firmware files   Kalle Valo
• [PATCH 1/6] ath10k: QCA4019 hw1.0: add firmware and board files   Kalle Valo
• [PATCH 2/6] ath10k: QCA9887 hw1.0: add firmware and board files   Kalle Valo
• [PATCH 3/6] ath10k: QCA9888 hw2.0: add firmware and board files   Kalle Valo
• [PATCH 4/6] ath10k: QCA9984 hw1.0: add firmware and board files   Kalle Valo
• [PATCH 5/6] ath10k: QCA988X hw2.0: update firmware to 10.2.4.70.54   Kalle Valo
• [PATCH 6/6] ath10k: QCA6174: update board files   Kalle Valo
• ath10k fail to load firmware   Valo, Kalle
• [PATCH 4/6] ath10k: QCA9984 hw1.0: add firmware and board files   Valo, Kalle
• [PATCH v2 0/6] linux-firmware: ath10k: update and add various firmware files   Kalle Valo
• [PATCH v2 1/6] ath10k: QCA4019 hw1.0: add firmware and board files   Kalle Valo
• [PATCH v2 2/6] ath10k: QCA9887 hw1.0: add firmware and board files   Kalle Valo
• [PATCH v2 3/6] ath10k: QCA9888 hw2.0: add firmware and board files   Kalle Valo
• [PATCH v2 4/6] ath10k: QCA9984 hw1.0: add firmware and board files   Kalle Valo
• [PATCH v2 5/6] ath10k: QCA988X hw2.0: update firmware to 10.2.4.70.54   Kalle Valo
• [PATCH v2 6/6] ath10k: QCA6174: update board files   Kalle Valo
• master-pending: ODEBUG: free active (active state 0) object type: timer_list hint: ath10k_htt_rx_ring_refill_retry+0x0/0x10 [ath10k_core]   Valo, Kalle
• ath10k: qca6174 firmware: difference between hw2.1/firmware-5 and hw3.0/firmware-4   Valo, Kalle
• [PATCHv3 1/3] ath10k: move firmware_swap_code_seg_info to ath10k_fw_file   Valo, Kalle
• ath10k: fix get rx_status from htt context   Kalle Valo
• ath10k: Remove driver log suggesting QCA9887 support is experimental   Kalle Valo
• [PATCHv3, 1/3] ath10k: move firmware_swap_code_seg_info to ath10k_fw_file   Kalle Valo
• [1/4] ath10k: implement wmi echo command   Kalle Valo
• [RESEND, v4] ath10k: Fix sending NULL/ Qos NULL data frames for QCA99X0 and later   Kalle Valo
• ath10k: fix throughput regression in multi client mode   Kalle Valo
• [PATCH 0/2] wireless: Use complete() instead complete_all()   Daniel Wagner
• [PATCH 1/2] carl9170: Fix wrong completion usage   Daniel Wagner
• [PATCH 2/2] ath10k: use complete() instead complete_all()   Daniel Wagner
• ath10k: Are there any PCI based WLAN cards to be plugged into desktop PC?   Xuebing Wang
• ath10k: qca6174 firmware: difference between hw2.1/firmware-5 and hw3.0/firmware-4   Xuebing Wang
• ath10k: qca6174 firmware: difference between hw2.1/firmware-5 and hw3.0/firmware-4   Xuebing Wang
• ath10k: qca6174 firmware: difference between hw2.1/firmware-5 and hw3.0/firmware-4   Xuebing Wang
• ath10k: is there hw3.0 firmware for qca6164 (one spatial stream)   Xuebing Wang
• [PATCH] ath10k: replace config_enabled() with IS_REACHABLE()   Masahiro Yamada
• Questions for ath10k rate control, bandwidth, and channel sensing   Changmok Yang
• [PATCH] ath10k: disable wake_tx_queue for older devices   Roman Yeryomin
• [PATCH 1/3] ath10k: Ensure there are no stale ar->txqs entries.   greearb at candelatech.com
• [PATCH 2/3] ath10k: Grab rcu_read_lock before the txqs spinlock.   greearb at candelatech.com
• [PATCH 3/3] ath10k: Improve logging message.   greearb at candelatech.com
• QCA9377   conder000 at gmail.com
• [PATCH] ath10k: hide kernel addresses from logs using %pK format specifier   c_mkenna at qti.qualcomm.com
• [PATCH] ath10k: Added support for extended dbglog module id for 10.4   c_mkenna at qti.qualcomm.com
• [PATCH] ath10k: Add WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT wmi service   c_traja at qti.qualcomm.com

Last message date: Wed Aug 31 01:24:15 PDT 2016
Archived on: Wed Aug 31 01:27:26 PDT 2016

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...