Issue with ATH10K driver while bringing up mesh interface

[Peter Oh]

I was talking about QCA988X firmware and I don't think QCA99X0 has officially released firmware for mesh.

Thanks,
Peter

From: Alexis Green <agreen at cococorp.com>
Sent: Monday, August 22, 2016 10:33 AM
To: Peter Oh
Cc: Pedersen, Thomas; Sridhar Konabathini; michal.kazior at tieto.com; Raj Joshi; ath10k at lists.infradead.org; Horse
Subject: Re: Issue with ATH10K driver while bringing up mesh interface
    
Speaking of rawmode and updated firmware, are QCA99X0 devices SOL as
far as mesh support goes? 10.4.1.00030-1 is the latest firmware I can
find for this hardware and it doesn't support neither raw mode, nor
native 80211s.

Best regards,
Alexis

On Mon, Aug 22, 2016 at 9:42 AM, Peter Oh <ebmajor at live.com> wrote:
> re-send in plain text mode.
>> >
>
>
>
>> > Please try  "insmod ath10k_core.ko rawmode=1"
>> >
> I recommend you to use  FW version 10.2.4.70.12-2 or higher, so that you don't have to use raw mode. Main downside using raw mode is throughput throttled.
> You can get the ath10k firmware from  https://github.com/kvalo/ath10k-firmware.



GitHub - kvalo/ath10k-firmware: Firmware files for ath10k ...
github.com
README.md ath10k-firmware. These are the latest firmware files for ath10k, a mac80211 driver for QCA988x, QCA6174, QCA99XX and similar. The official location to ...

>
>
> Peter
>
>
> _______________________________________________
> ath10k mailing list
> ath10k at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/ath10k