master-pending: ODEBUG: free active (active state 0) object type: timer_list hint: ath10k_htt_rx_ring_refill_retry+0x0/0x10 [ath10k_core]

Valo, Kalle kvalo at qca.qualcomm.com
Fri Aug 26 10:43:24 PDT 2016


"Manoharan, Rajkumar" <rmanohar at qti.qualcomm.com> writes:

>>> If possible, could you please try below change?
>>>
>>> diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
>>> index 33380fba5948..29fc9052e51a 100644
>>> --- a/drivers/net/wireless/ath/ath10k/pci.c
>>> +++ b/drivers/net/wireless/ath/ath10k/pci.c
>>> @@ -1759,6 +1759,7 @@ void ath10k_pci_ce_deinit(struct ath10k *ar)
>>>
>>>  void ath10k_pci_flush(struct ath10k *ar)
>>>  {
>>> +       napi_synchronize(&ar->napi);
>>>         ath10k_pci_rx_retry_sync(ar);
>>>         ath10k_pci_buffer_cleanup(ar);
>>>  }
>>
>> Sorry, didn't help:
>>
> It seems napi synchronization alone is not sufficient. NAPI should be disabled. Need your help again. ;)
> With below change WARNING & KASAN BUG is gone. Could you please help to verify below change?
>
> diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
> index 6e21fa1478ea..04ff45deb173 100644
> --- a/drivers/net/wireless/ath/ath10k/pci.c
> +++ b/drivers/net/wireless/ath/ath10k/pci.c
> @@ -1775,6 +1775,8 @@ static void ath10k_pci_hif_stop(struct ath10k *ar)
>          */
>         ath10k_pci_safe_chip_reset(ar);
>  
> +       napi_synchronize(&ar->napi);
> +       napi_disable(&ar->napi);
>         ath10k_pci_irq_disable(ar);
>         ath10k_pci_irq_sync(ar);
>         ath10k_pci_flush(ar);
> @@ -2531,6 +2533,7 @@ static int ath10k_pci_hif_power_up(struct ath10k *ar)
>                 ath10k_err(ar, "could not wake up target CPU: %d\n", ret);
>                 goto err_ce;
>         }
> +       napi_enable(&ar->napi);
>  
>         return 0;
>  
> @@ -2878,7 +2881,6 @@ void ath10k_pci_init_napi(struct ath10k *ar)
>  {
>         netif_napi_add(&ar->napi_dev, &ar->napi, ath10k_pci_napi_poll,
>                        ATH10K_NAPI_BUDGET);
> -       napi_enable(&ar->napi);
>  }

The patch was corrupted but I did the same changes manually. And now I
can't get it to crash anymore, earlier that was really easy.

-- 
Kalle Valo


More information about the ath10k mailing list