Issue with ATH10K driver while bringing up mesh interface

[Alexis Green]

Speaking of rawmode and updated firmware, are QCA99X0 devices SOL as
far as mesh support goes? 10.4.1.00030-1 is the latest firmware I can
find for this hardware and it doesn't support neither raw mode, nor
native 80211s.

Best regards,
Alexis

On Mon, Aug 22, 2016 at 9:42 AM, Peter Oh <ebmajor at live.com> wrote:
> re-send in plain text mode.
>> >
>
>
>
>> > Please try  "insmod ath10k_core.ko rawmode=1"
>> >
> I recommend you to use  FW version 10.2.4.70.12-2 or higher, so that you don't have to use raw mode. Main downside using raw mode is throughput throttled.
> You can get the ath10k firmware from https://github.com/kvalo/ath10k-firmware.
>
>
> Peter
>
>
> _______________________________________________
> ath10k mailing list
> ath10k at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/ath10k