[OpenWrt-Devel] [ramips] Linkit Smart 7688 kmod-sdhci-mt7620

[Ivan Hörler]

Hi
so i did: https://github.com/openwrt/openwrt/pull/2410
Thanks for comments if its done wright or not. It’s my first.
Regards, Ivan Hörler

> Am 13.09.2019 um 22:41 schrieb Adrian Schmutzler <mail at adrianschmutzler.de>:
> 
> Hi,
> 
>> -----Original Message-----
>> From: openwrt-devel [mailto:openwrt-devel-bounces at lists.openwrt.org] On Behalf Of Ivan Hörler
>> Sent: Freitag, 13. September 2019 22:32
>> To: openwrt-devel at lists.openwrt.org
>> Subject: [OpenWrt-Devel] [ramips] Linkit Smart 7688 kmod-sdhci-mt7620
>> 
>> Hi
>> I have a question about how openwrt handles packages needed by a target.
>> The Linkit Smart 7688 has a SD-Card reader that does not work with the official build of openwrt 18.06.
>> Adding  kmod-sdhci-mt7620 makes it working.
>> I think it would be nice to get a fully working device when updateing with the official build. Right?
>> 
>> So i had a look in to the files and found
>> openwrt/target/linux/ramips/mt76x8/target.mk
>> and
>> openwrt/target/linux/ramips/mt76x8/profiles/00-default.mk
>> where some packages are defined.
> 
> this sounds like a device-specific change to me.
> 
> To add packages for specific devices, you would normally add it to the DEVICE_PACKAGES variable in the corresponding device node located in target/linux/ramips/image/mt76x8.mk (for your subtarget).
> 
> If this proves to be working, please send a patch to this list or open a Pull Request in GitHub to share your improvement!
> 
> Best
> 
> Adrian
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/mailman/listinfo/openwrt-devel


_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel