[OpenWrt-Devel] [PATCH v3] bcm63xx: add Comtrend VR-3026e support

[Jonas Gorski]

On Wed, Aug 26, 2015 at 7:18 PM, Martin Tesar <tesarmar at gmail.com> wrote:
> Add support for Comtrend VR-3026e v1.
> The device is almost identical to the Comtrend VR-3025un.
>
> Signed-off-by: Martin Tesar <tesarmar at gmail.com>
> ---
>  target/linux/brcm63xx/base-files/etc/diag.sh       |  3 +
>  .../base-files/etc/uci-defaults/02_network         |  3 +-
>  .../base-files/etc/uci-defaults/09_fix_crc         |  1 +
>  target/linux/brcm63xx/base-files/lib/brcm63xx.sh   |  3 +
>  .../lib/preinit/05_init_interfaces_brcm63xx        |  1 +
>  target/linux/brcm63xx/dts/vr-3026e.dts             | 88 ++++++++++++++++++++++
>  target/linux/brcm63xx/image/Makefile               |  2 +
>  .../brcm63xx/patches-3.18/572-board_VR-3026e.patch | 79 +++++++++++++++++++
>  .../brcm63xx/patches-4.1/572-board_VR-3026e.patch  | 79 +++++++++++++++++++
>  target/linux/brcm63xx/profiles/comtrend.mk         |  9 +++
>  10 files changed, 267 insertions(+), 1 deletion(-)
>  create mode 100644 target/linux/brcm63xx/dts/vr-3026e.dts
>  create mode 100644 target/linux/brcm63xx/patches-3.18/572-board_VR-3026e.patch
>  create mode 100644 target/linux/brcm63xx/patches-4.1/572-board_VR-3026e.patch
>
> diff --git a/target/linux/brcm63xx/base-files/etc/diag.sh b/target/linux/brcm63xx/base-files/etc/diag.sh
> index 7916ac2..7826fad 100644
> --- a/target/linux/brcm63xx/base-files/etc/diag.sh
> +++ b/target/linux/brcm63xx/base-files/etc/diag.sh
> @@ -39,6 +39,9 @@ set_state() {
>         vr-3025u)
>                 status_led="VR-3025u:green:power"
>                 ;;
> +       vr-3026e)
> +               status_led="VR-3026e:green:power"
> +               ;;
>         wap-5813n)
>                 status_led="WAP-5813n:green:power"
>                 ;;
> diff --git a/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network b/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
> index 2ff9e45..4de861c 100644
> --- a/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
> +++ b/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
> @@ -94,8 +94,9 @@ fast2504n |\
>  fast2704v2 |\
>  hg655b |\
>  p870hw-51a_v2 |\
> +vr-3025u |\
>  vr-3025un |\
> -vr-3025u)
> +vr-3026e)

Why did you change the order of vr-3025u and vr-3025un here? You
didn't do this in your previous versions. Please do not add random
cleanups/changes to your patches.


Jonas
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel