[OpenWrt-Devel] [PATCH v3] bcm63xx: add Comtrend VR-3026e support
Martin Tesar
tesarmar at gmail.com
Wed Aug 26 13:18:14 EDT 2015
Add support for Comtrend VR-3026e v1.
The device is almost identical to the Comtrend VR-3025un.
Signed-off-by: Martin Tesar <tesarmar at gmail.com>
---
target/linux/brcm63xx/base-files/etc/diag.sh | 3 +
.../base-files/etc/uci-defaults/02_network | 3 +-
.../base-files/etc/uci-defaults/09_fix_crc | 1 +
target/linux/brcm63xx/base-files/lib/brcm63xx.sh | 3 +
.../lib/preinit/05_init_interfaces_brcm63xx | 1 +
target/linux/brcm63xx/dts/vr-3026e.dts | 88 ++++++++++++++++++++++
target/linux/brcm63xx/image/Makefile | 2 +
.../brcm63xx/patches-3.18/572-board_VR-3026e.patch | 79 +++++++++++++++++++
.../brcm63xx/patches-4.1/572-board_VR-3026e.patch | 79 +++++++++++++++++++
target/linux/brcm63xx/profiles/comtrend.mk | 9 +++
10 files changed, 267 insertions(+), 1 deletion(-)
create mode 100644 target/linux/brcm63xx/dts/vr-3026e.dts
create mode 100644 target/linux/brcm63xx/patches-3.18/572-board_VR-3026e.patch
create mode 100644 target/linux/brcm63xx/patches-4.1/572-board_VR-3026e.patch
diff --git a/target/linux/brcm63xx/base-files/etc/diag.sh b/target/linux/brcm63xx/base-files/etc/diag.sh
index 7916ac2..7826fad 100644
--- a/target/linux/brcm63xx/base-files/etc/diag.sh
+++ b/target/linux/brcm63xx/base-files/etc/diag.sh
@@ -39,6 +39,9 @@ set_state() {
vr-3025u)
status_led="VR-3025u:green:power"
;;
+ vr-3026e)
+ status_led="VR-3026e:green:power"
+ ;;
wap-5813n)
status_led="WAP-5813n:green:power"
;;
diff --git a/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network b/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
index 2ff9e45..4de861c 100644
--- a/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
+++ b/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
@@ -94,8 +94,9 @@ fast2504n |\
fast2704v2 |\
hg655b |\
p870hw-51a_v2 |\
+vr-3025u |\
vr-3025un |\
-vr-3025u)
+vr-3026e)
ucidef_set_interface_lan "eth0.1"
ucidef_add_switch "eth0" "1" "1"
ucidef_add_switch_vlan "eth0" "1" "0 1 2 3 8t"
diff --git a/target/linux/brcm63xx/base-files/etc/uci-defaults/09_fix_crc b/target/linux/brcm63xx/base-files/etc/uci-defaults/09_fix_crc
index 4a167dc..f307a4c 100644
--- a/target/linux/brcm63xx/base-files/etc/uci-defaults/09_fix_crc
+++ b/target/linux/brcm63xx/base-files/etc/uci-defaults/09_fix_crc
@@ -30,6 +30,7 @@ case "$(brcm63xx_board_name)" in
v2500v_bb |\
vr-3025u |\
vr-3025un |\
+ vr-3026e |\
wap-5813n)
do_fixcrc
;;
diff --git a/target/linux/brcm63xx/base-files/lib/brcm63xx.sh b/target/linux/brcm63xx/base-files/lib/brcm63xx.sh
index 92fa5f2..1a97c86 100755
--- a/target/linux/brcm63xx/base-files/lib/brcm63xx.sh
+++ b/target/linux/brcm63xx/base-files/lib/brcm63xx.sh
@@ -102,6 +102,9 @@ brcm63xx_dt_detect() {
"Comtrend VR-3025un")
board_name="vr-3025un"
;;
+ "Comtrend VR-3026e")
+ board_name="vr-3026e"
+ ;;
"Comtrend WAP-5813n")
board_name="wap-5813n"
;;
diff --git a/target/linux/brcm63xx/base-files/lib/preinit/05_init_interfaces_brcm63xx b/target/linux/brcm63xx/base-files/lib/preinit/05_init_interfaces_brcm63xx
index d6ec537..abf5b89 100644
--- a/target/linux/brcm63xx/base-files/lib/preinit/05_init_interfaces_brcm63xx
+++ b/target/linux/brcm63xx/base-files/lib/preinit/05_init_interfaces_brcm63xx
@@ -32,6 +32,7 @@ set_preinit_iface() {
v2110 |\
vr-3025un |\
vr-3025u |\
+ vr-3026e |\
wap-5813n)
ifname=eth0
;;
diff --git a/target/linux/brcm63xx/dts/vr-3026e.dts b/target/linux/brcm63xx/dts/vr-3026e.dts
new file mode 100644
index 0000000..49790e2
--- /dev/null
+++ b/target/linux/brcm63xx/dts/vr-3026e.dts
@@ -0,0 +1,88 @@
+/dts-v1/;
+
+#include "bcm6368.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Comtrend VR-3026e";
+ compatible = "comtrend,vr-3026e", "brcm,bcm6368";
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+ debounce-interval = <60>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio1 2 1>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ dsl_green {
+ label = "VR-3026e:green:dsl";
+ gpios = <&gpio0 2 1>;
+ };
+ inet_green {
+ label = "VR-3026e:green:inet";
+ gpios = <&gpio0 5 0>;
+ };
+ lan1_green {
+ label = "VR-3026e:green:lan1";
+ gpios = <&gpio0 6 1>;
+ };
+ lan2_green {
+ label = "VR-3026e:green:lan2";
+ gpios = <&gpio0 7 1>;
+ };
+ lan3_green {
+ label = "VR-3026e:green:lan3";
+ gpios = <&gpio0 8 1>;
+ };
+ lan4_green {
+ label = "VR-3026e:green:lan4";
+ gpios = <&gpio0 9 1>;
+ };
+ power_green {
+ label = "VR-3026e:green:power";
+ gpios = <&gpio0 22 0>;
+ default-state = "on";
+ };
+ power_red {
+ label = "VR-3026e:red:power";
+ gpios = <&gpio0 24 0>;
+ };
+ inet_red {
+ label = "VR-3026e:red:inet";
+ gpios = <&gpio0 31 0>;
+ };
+ };
+};
+
+&pflash {
+ status = "ok";
+
+ linux,part-probe = "bcm63xxpart";
+
+ cfe at 0 {
+ label = "CFE";
+ reg = <0x000000 0x010000>;
+ read-only;
+ };
+
+ linux at 10000 {
+ label = "linux";
+ reg = <0x010000 0x7e0000>;
+ };
+
+ nvram at 7f0000 {
+ label = "nvram";
+ reg = <0x7f0000 0x010000>;
+ };
+};
diff --git a/target/linux/brcm63xx/image/Makefile b/target/linux/brcm63xx/image/Makefile
index 90b9fa6..9d3ec9f 100755
--- a/target/linux/brcm63xx/image/Makefile
+++ b/target/linux/brcm63xx/image/Makefile
@@ -535,6 +535,8 @@ $(eval $(call bcm63xxCfe,CT6373,CT-6373,ct-6373,CT6373-1,6358))
$(eval $(call bcm63xxCfe,VR3025u,VR-3025u,vr-3025u,96368M-1541N,6368,--pad 16 --image-offset 0x20000 --block-size 0x20000))
# Comtrend VR-3025un
$(eval $(call bcm63xxCfe,VR3025un,VR-3025un,vr-3025un,96368M-1341N,6368,--pad 4))
+# Comtrend VR-3026e
+$(eval $(call bcm63xxCfe,VR3026e,VR-3026e,vr-3026e,96368MT-1341N1,6368,--pad 4))
# Comtrend WAP-5813n
$(eval $(call bcm63xxCfe,WAP5813n,WAP-5813n,wap-5813n,96369R-1231N,6368,--pad 4))
# D-Link DSL-2640B, rev B2
diff --git a/target/linux/brcm63xx/patches-3.18/572-board_VR-3026e.patch b/target/linux/brcm63xx/patches-3.18/572-board_VR-3026e.patch
new file mode 100644
index 0000000..3142f84
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.18/572-board_VR-3026e.patch
@@ -0,0 +1,79 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -2168,6 +2168,60 @@ static struct board_info __initdata boar
+ },
+ };
+
++static struct sprom_fixup __initdata vr3026e_fixups[] = {
++ { .offset = 97, .value = 0xfeb3 },
++ { .offset = 98, .value = 0x1618 },
++ { .offset = 99, .value = 0xfab0 },
++ { .offset = 113, .value = 0xfed1 },
++ { .offset = 114, .value = 0x1609 },
++ { .offset = 115, .value = 0xfad9 },
++};
++
++static struct board_info __initdata board_VR3026e = {
++ .name = "96368MT-1341N1",
++ .expected_cpu_id = 0x6368,
++
++ .has_uart0 = 1,
++ .has_pci = 1,
++ .use_fallback_sprom = 1,
++ .has_ohci0 = 1,
++ .has_ehci0 = 1,
++
++ .has_enetsw = 1,
++ .enetsw = {
++ .used_ports = {
++ [0] = {
++ .used = 1,
++ .phy_id = 1,
++ .name = "port1",
++ },
++ [1] = {
++ .used = 1,
++ .phy_id = 2,
++ .name = "port2",
++ },
++ [2] = {
++ .used = 1,
++ .phy_id = 3,
++ .name = "port3",
++ },
++ [3] = {
++ .used = 1,
++ .phy_id = 4,
++ .name = "port4",
++ },
++ },
++ },
++
++ .fallback_sprom = {
++ .type = SPROM_BCM43222,
++ .pci_bus = 0,
++ .pci_dev = 1,
++ .board_fixups = vr3026e_fixups,
++ .num_board_fixups = ARRAY_SIZE(vr3026e_fixups),
++ },
++};
++
+ static struct b53_platform_data WAP5813n_b53_pdata = {
+ .alias = "eth0",
+ };
+@@ -2472,6 +2526,7 @@ static const struct board_info __initcon
+ &board_P870HW51A_V2,
+ &board_VR3025u,
+ &board_VR3025un,
++ &board_VR3026e,
+ &board_WAP5813n,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_63268
+@@ -2572,6 +2627,7 @@ static struct of_device_id const bcm963x
+ { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
+ { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, },
+ { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, },
++ { .compatible = "comtrend,vr-3026e", .data = &board_VR3026e, },
+ { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
+ { .compatible = "huawei,hg655b", .data = &board_HG655b, },
+ { .compatible = "netgear,dgnd3700v1", .data = &board_DGND3700v1_3800B, },
diff --git a/target/linux/brcm63xx/patches-4.1/572-board_VR-3026e.patch b/target/linux/brcm63xx/patches-4.1/572-board_VR-3026e.patch
new file mode 100644
index 0000000..3142f84
--- /dev/null
+++ b/target/linux/brcm63xx/patches-4.1/572-board_VR-3026e.patch
@@ -0,0 +1,79 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -2168,6 +2168,60 @@ static struct board_info __initdata boar
+ },
+ };
+
++static struct sprom_fixup __initdata vr3026e_fixups[] = {
++ { .offset = 97, .value = 0xfeb3 },
++ { .offset = 98, .value = 0x1618 },
++ { .offset = 99, .value = 0xfab0 },
++ { .offset = 113, .value = 0xfed1 },
++ { .offset = 114, .value = 0x1609 },
++ { .offset = 115, .value = 0xfad9 },
++};
++
++static struct board_info __initdata board_VR3026e = {
++ .name = "96368MT-1341N1",
++ .expected_cpu_id = 0x6368,
++
++ .has_uart0 = 1,
++ .has_pci = 1,
++ .use_fallback_sprom = 1,
++ .has_ohci0 = 1,
++ .has_ehci0 = 1,
++
++ .has_enetsw = 1,
++ .enetsw = {
++ .used_ports = {
++ [0] = {
++ .used = 1,
++ .phy_id = 1,
++ .name = "port1",
++ },
++ [1] = {
++ .used = 1,
++ .phy_id = 2,
++ .name = "port2",
++ },
++ [2] = {
++ .used = 1,
++ .phy_id = 3,
++ .name = "port3",
++ },
++ [3] = {
++ .used = 1,
++ .phy_id = 4,
++ .name = "port4",
++ },
++ },
++ },
++
++ .fallback_sprom = {
++ .type = SPROM_BCM43222,
++ .pci_bus = 0,
++ .pci_dev = 1,
++ .board_fixups = vr3026e_fixups,
++ .num_board_fixups = ARRAY_SIZE(vr3026e_fixups),
++ },
++};
++
+ static struct b53_platform_data WAP5813n_b53_pdata = {
+ .alias = "eth0",
+ };
+@@ -2472,6 +2526,7 @@ static const struct board_info __initcon
+ &board_P870HW51A_V2,
+ &board_VR3025u,
+ &board_VR3025un,
++ &board_VR3026e,
+ &board_WAP5813n,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_63268
+@@ -2572,6 +2627,7 @@ static struct of_device_id const bcm963x
+ { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
+ { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, },
+ { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, },
++ { .compatible = "comtrend,vr-3026e", .data = &board_VR3026e, },
+ { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
+ { .compatible = "huawei,hg655b", .data = &board_HG655b, },
+ { .compatible = "netgear,dgnd3700v1", .data = &board_DGND3700v1_3800B, },
diff --git a/target/linux/brcm63xx/profiles/comtrend.mk b/target/linux/brcm63xx/profiles/comtrend.mk
index 8c1b862..99fec4a 100644
--- a/target/linux/brcm63xx/profiles/comtrend.mk
+++ b/target/linux/brcm63xx/profiles/comtrend.mk
@@ -73,6 +73,15 @@ define Profile/VR3025un/Description
endef
$(eval $(call Profile,VR3025un))
+define Profile/VR3026e
+ NAME:=Comtrend VR-3026e
+ PACKAGES:=kmod-b43 wpad-mini
+endef
+define Profile/VR3026e/Description
+ Package set optimized for VR-3026e.
+endef
+$(eval $(call Profile,VR3026e))
+
define Profile/WAP5813n
NAME:=Comtrend WAP-5813n
PACKAGES:=kmod-b43 wpad-mini \
--
2.1.4
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list