[OpenWrt-Devel] Still no progress on gigabit ports on Mikrotek 2011UiAS-2HnD

[Chris Green]

On Wed, Nov 19, 2014 at 01:50:39PM -0500, Soren Harward wrote:
> On Tue, Nov 18, 2014 at 6:50 AM, Chris Green <cl at isbd.net> wrote:
> > I still have non-working gigabit ports on my Mikrotik 2011UiAS-2HnD. Soren
> > Harward kindly had a look at various diagnostics but hasn't seen
> > anything obvious wrong yet.
> ...
> > Looking at statistics for the Gigabit switch there's loads of data
> > sent but nothing at all received.
> 
> Not true on both counts: machines connected to the network are getting
> IPv6 addresses from your router through SLAAC and DHCPv6, but IPv4
> isn't working.  I haven't had time to dig through the information
> you've sent me, and probably won't until next week.  In the meantime,
> start looking for problems above the hardware layer.
> 
OK, sorry for the noise I've been making meanwhile, I'll be more
patient.  :-)

> Also, the USB port on the RB2011 is weirdly not hot-pluggable.  You
> have to connect the device first, then load the appropriate USB kernel
> modules.
> 
OK, I'll try that and see if I get anywhere.

Thanks!  :-)

-- 
Chris Green
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel