[OpenWrt-Devel] [PATCH uqmi] Add command --get-msisdn for getting phone number

[Sławomir Demeszko]

---
For two SIM cards from the same operator (Plus GSM) I get error message:
"Not provisioned", when try to get MSISDN. Real phone with these cards
inserted also cannot display a phone number. I can make calls normally.
And other two (different operators) works correctly.
Is anybody know why this happens?

 commands-dms.c | 16 ++++++++++++++++
 commands-dms.h |  2 ++
 2 files changed, 18 insertions(+)

diff --git a/commands-dms.c b/commands-dms.c
index 563321e..ad5c89d 100644
--- a/commands-dms.c
+++ b/commands-dms.c
@@ -159,6 +159,22 @@ cmd_dms_get_imsi_prepare(struct qmi_dev *qmi, struct qmi_request *req, struct qm
 	return QMI_CMD_REQUEST;
 }
 
+static void cmd_dms_get_msisdn_cb(struct qmi_dev *qmi, struct qmi_request *req, struct qmi_msg *msg)
+{
+	struct qmi_dms_get_msisdn_response res;
+
+	qmi_parse_dms_get_msisdn_response(msg, &res);
+	if (res.data.msisdn)
+		blobmsg_add_string(&status, NULL, res.data.msisdn);
+}
+
+static enum qmi_cmd_result
+cmd_dms_get_msisdn_prepare(struct qmi_dev *qmi, struct qmi_request *req, struct qmi_msg *msg, char *arg)
+{
+	qmi_set_dms_get_msisdn_request(msg);
+	return QMI_CMD_REQUEST;
+}
+
 #define cmd_dms_reset_cb no_cb
 static enum qmi_cmd_result
 cmd_dms_reset_prepare(struct qmi_dev *qmi, struct qmi_request *req, struct qmi_msg *msg, char *arg)
diff --git a/commands-dms.h b/commands-dms.h
index 1f21b13..c20d007 100644
--- a/commands-dms.h
+++ b/commands-dms.h
@@ -8,6 +8,7 @@
 	__uqmi_command(dms_set_new_pin, new-pin, required, CMD_TYPE_OPTION), \
 	__uqmi_command(dms_get_iccid, get-iccid, no, QMI_SERVICE_DMS), \
 	__uqmi_command(dms_get_imsi, get-imsi, no, QMI_SERVICE_DMS), \
+	__uqmi_command(dms_get_msisdn, get-msisdn, no, QMI_SERVICE_DMS), \
 	__uqmi_command(dms_set_operating_mode, set-device-operating-mode, required, QMI_SERVICE_DMS), \
 	__uqmi_command(dms_reset, reset-dms, no, QMI_SERVICE_DMS) \
 
@@ -23,6 +24,7 @@
 		"    --new-pin <new pin>:            New pin\n" \
 		"  --get-iccid:                      Get the ICCID\n" \
 		"  --get-imsi:                       Get International Mobile Subscriber ID\n" \
+    "  --get-msisdn:                     Get the MSISDN (telephone number)\n" \
 		"  --reset-dms:                      Reset the DMS service\n" \
 		"  --set-device-operating-mode <m>   Set the device operating mode\n" \
 		"                                    (modes: online, low_power, factory_test, offline\n" \
-- 
1.9.1
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel