[OpenWrt-Devel] lantiq DSL drivers / firmware info
martin.blumenstingl at googlemail.com
Mon May 4 15:46:01 EDT 2015
> I've never seen that, but which firmware are you using?
> I'd been using the speedport 1.21
> (e1ef690e8dc0075468d4b6ba7bcdd0fc710bc671) one IIRC.
I am running Chaos Calmer (but I've also tried Barrier Breaker) and that
is exactly the firmware I am using.
> Are you on VDSL Annex B, where you'd fall back to ADSL 16/1 when
> vectoring isn't supported? If so, this configuration should work:
No VDSL here yet. A fritz box (with stock firmware) on the same line
> config vdsl 'dsl'
> option annex 'b'
> option firmware '/lib/firmware/vdsl.bin'
> option tone 'b'
> option xfer_mode 'ptm'
My settings look similar: I use xfer_mode 'atm' - but the other values
> On my previous ISP I was on Annex A, but I don't have the right
> configuration right now.
I'm using a line provided by Deutsche Telekom (resold to 1&1, but that
shouldn't make a difference).
> First I'm going to replace this router with one that's faster, and then
> I'll start playing with this :-) Right now I need it to have internet
Makes sense - never play with productive hardware :-)
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
More information about the openwrt-devel