[OpenWrt-Devel] Status of DFS in OpenWrt -> ath9k
monomartin at opennet-initiative.de
Wed Jul 2 16:50:13 EDT 2014
On 7/1/14, 10:04 AM, Jacek Kikiewicz wrote:
> I have few APs that are using ath9k driver, I've read that now DFS is supported on that driver,
> so I compiled latest revision (yesterday: 41415), and started playing, basically when as per
> manual / howto I run 'iw phy phy1 info' I can see DFS channels, exactly like in howto on a wiki, problem is however
> that I cannot make it work on those channels (I've tried 52,56,100, 104), after changing config and restarting wifi
> I saw in dmesg 'interface wlan1 entered disabled mode) - I tried with HT20 for the beginning.
> So, question here is, should this work in current state or is there still some support missing?
> I can pull any logs / settings that are of interest.
Have you elected
when compiling the driver? This way you agree to the fact that your
hardware supports DFS. After that DFS channels can be selected.
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
More information about the openwrt-devel