[OpenWrt-Devel] Status of DFS in OpenWrt -> ath9k

[Jacek Kikiewicz]

Hi,

I sure selected this option, as I said command 'iw phy phy1 info' does 
in fact show DFS channels, but I just cannot set them for usage...

Jacek

On 07/02/14 22:50, Martin Garbe wrote:
> On 7/1/14, 10:04 AM, Jacek Kikiewicz wrote:
>> Hello,
>>
>> I have few APs that are using ath9k driver, I've read that now DFS is supported on that driver,
>> so I compiled latest revision (yesterday: 41415), and started playing, basically when as per
>> manual / howto I run 'iw phy phy1 info' I can see DFS channels, exactly like in howto on a wiki, problem is however
>> that I cannot make it work on those channels (I've tried 52,56,100, 104), after changing config and restarting wifi
>> I saw in dmesg 'interface wlan1 entered disabled mode) - I tried with HT20 for the beginning.
>> So, question here is, should this work in current state or is there still some support missing?
>> I can pull any logs  / settings that are of interest.
> Have you elected
>   CONFIG_PACKAGE_ATH_DFS=y
> when compiling the driver? This way you agree to the fact that your
> hardware supports DFS. After that DFS channels can be selected.
>
>
> Martin
>
>> Thanks!
>> Jacek
>> _______________________________________________
>> openwrt-devel mailing list
>> openwrt-devel at lists.openwrt.org
>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>>
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel