[PATCH 3/3] bmips: inteno-xg6846: Add DSA LED definitions

[Linus Walleij]

This adds the LED definitons for the XG6846 DSA port LEDs.
These are standard properties compatible with the existing
Marvell 88e6xxx DT bindings and fully standardized so this
is fine to add. They will be used by the in-flight Marvell
88e6xxx LEDs support patch.

Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
---
 target/linux/bmips/dts/bcm6328-inteno-xg6846.dts | 108 +++++++++++++++++++++++
 1 file changed, 108 insertions(+)

diff --git a/target/linux/bmips/dts/bcm6328-inteno-xg6846.dts b/target/linux/bmips/dts/bcm6328-inteno-xg6846.dts
index 3cd5fb0607ec..161077b3c244 100644
--- a/target/linux/bmips/dts/bcm6328-inteno-xg6846.dts
+++ b/target/linux/bmips/dts/bcm6328-inteno-xg6846.dts
@@ -195,6 +195,24 @@
 				label = "lan1";
 
 				phy-handle = <&lan1phy>;
+
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led at 0 {
+						reg = <0>;
+						color = <LED_COLOR_ID_GREEN>;
+						function = LED_FUNCTION_LAN;
+						default-state = "keep";
+					};
+					led at 1 {
+						reg = <1>;
+						color = <LED_COLOR_ID_AMBER>;
+						function = LED_FUNCTION_LAN;
+						default-state = "off";
+					};
+				};
 			};
 
 			port at 1 {
@@ -202,6 +220,24 @@
 				label = "lan2";
 
 				phy-handle = <&lan2phy>;
+
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led at 0 {
+						reg = <0>;
+						color = <LED_COLOR_ID_GREEN>;
+						function = LED_FUNCTION_LAN;
+						default-state = "keep";
+					};
+					led at 1 {
+						reg = <1>;
+						color = <LED_COLOR_ID_AMBER>;
+						function = LED_FUNCTION_LAN;
+						default-state = "off";
+					};
+				};
 			};
 
 			port at 2 {
@@ -209,6 +245,24 @@
 				label = "lan3";
 
 				phy-handle = <&lan3phy>;
+
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led at 0 {
+						reg = <0>;
+						color = <LED_COLOR_ID_GREEN>;
+						function = LED_FUNCTION_LAN;
+						default-state = "keep";
+					};
+					led at 1 {
+						reg = <1>;
+						color = <LED_COLOR_ID_AMBER>;
+						function = LED_FUNCTION_LAN;
+						default-state = "off";
+					};
+				};
 			};
 
 			port at 3 {
@@ -216,6 +270,24 @@
 				label = "lan4";
 
 				phy-handle = <&lan4phy>;
+
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led at 0 {
+						reg = <0>;
+						color = <LED_COLOR_ID_GREEN>;
+						function = LED_FUNCTION_LAN;
+						default-state = "keep";
+					};
+					led at 1 {
+						reg = <1>;
+						color = <LED_COLOR_ID_AMBER>;
+						function = LED_FUNCTION_LAN;
+						default-state = "off";
+					};
+				};
 			};
 
 			port at 4 {
@@ -223,6 +295,24 @@
 				label = "ext1";
 
 				phy-handle = <&ext1phy>;
+
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led at 0 {
+						reg = <0>;
+						color = <LED_COLOR_ID_GREEN>;
+						function = LED_FUNCTION_WAN;
+						default-state = "keep";
+					};
+					led at 1 {
+						reg = <1>;
+						color = <LED_COLOR_ID_AMBER>;
+						function = LED_FUNCTION_WAN;
+						default-state = "off";
+					};
+				};
 			};
 
 			port at 5 {
@@ -236,6 +326,24 @@
 					speed = <1000>;
 					full-duplex;
 				};
+
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led at 0 {
+						reg = <0>;
+						color = <LED_COLOR_ID_GREEN>;
+						function = LED_FUNCTION_WAN;
+						default-state = "keep";
+					};
+					led at 1 {
+						reg = <1>;
+						color = <LED_COLOR_ID_AMBER>;
+						function = LED_FUNCTION_WAN;
+						default-state = "off";
+					};
+				};
 			};
 
 			port at 6 {

-- 
2.45.2